Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FDS8949 Dual N-Channel Logic Level PowerTrench(R) MOSFET tm 40V, 6A, 29m Features General Description Max rDS(on) = 29m at VGS = 10V These N-Channel Logic Level MOSFETs are produced using Fairchild Semiconductor's advanced PowerTrench(R) process that has been especially tailored to minimize the on-state resistance and yet maintain superior switching performance. These devices are well suited for low voltage and battery powered applications where low in-line power loss and fast switching are required. Max rDS(on) = 36m at VGS = 4.5V Low gate charge High performance trench technology for extremely low rDS(on) High power and current handling capability RoHS compliant Applications Inverter Power suppliers D2 D2 D1 D1 G2 SO-8 S1 Pin 1 G1 S2 MOSFET Maximum Ratings TA = 25C unless otherwise noted Symbol VDS Drain to Source Voltage Parameter VGS Gate to Source Voltage Drain Current -Continuous ID (Note 1a) -Pulsed EAS Drain-Source Avalanche Energy (Note 3) 20 V 6 A 26 mJ 2 Power Dissipation for Single Operation TJ, TSTG Units V 20 Power Dissipation for Dual Operation PD Ratings 40 (Note 1a) (Note 1b) Operating and Storage Junction Temperature Range 1.6 W 0.9 C -55 to 150 Thermal Characteristics RJA Thermal Resistance-Single operation, Junction to Ambient (Note 1a) 81 RJA Thermal Resistance-Single operation, Junction to Ambient (Note 1b) 135 RJC Thermal Resistance, Junction to Case (Note 1) 40 C/W Package Marking and Ordering Information Device Marking FDS8949 Device FDS8949 (c)2006 Fairchild Semiconductor Corporation FDS8949 Rev. B1 Reel Size 13'' 1 Tape Width 12mm Quantity 2500 units www.fairchildsemi.com FDS8949 Dual N-Channel Logic Level PowerTrench(R) MOSFET October 2006 Symbol Parameter Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain to Source Breakdown Voltage ID = 250A, VGS = 0V BVDSS TJ Breakdown Voltage Temperature Coefficient IDSS Zero Gate Voltage Drain Current IGSS Gate to Source Leakage Current 40 ID = 250A, referenced to 25C V mV/C 33 1 A 10 A 100 nA 3 V VDS = 32V, VGS = 0V TJ = 55C VGS = 20V,VDS = 0V On Characteristics (Note 2) VGS(th) Gate to Source Threshold Voltage VGS = VDS, ID = 250A VGS(th) TJ Gate to Source Threshold Voltage Temperature Coefficient ID = 250A, referenced to 25C rDS(on) Drain to Source On Resistance gFS Forward Transconductance 1 1.9 -4.6 mV/C VGS = 10V, ID = 6A 21 29 VGS = 4.5V, ID = 4.5A 26 36 VGS = 10V, ID = 6A,TJ = 125C 29 43 VDS = 10V,ID = 6A 22 m S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate Resistance VDS = 20V, VGS = 0V, f = 1MHz f = 1MHz 715 955 pF 105 140 pF 60 90 pF 1.1 Switching Characteristics td(on) Turn-On Delay Time tr Rise Time td(off) Turn-Off Delay Time tf Fall Time Qg Total Gate Charge Qgs Gate to Source Gate Charge Qgd Gate to Drain "Miller"Charge VDD = 20V, ID = 1A VGS = 10V, RGEN = 6 VDS = 20V, ID = 6A,VGS = 5V 9 18 ns 5 10 ns 23 37 ns 3 6 ns 7.7 11 nC 2.4 nC 2.8 nC Drain-Source Diode Characteristics and Maximum Ratings VSD Source to Drain Diode Forward Voltage VGS = 0V, IS = 6A (note 2) 0.8 1.2 V trr Reverse Recovery Time (note 3) 17 26 ns Qrr Reverse Recovery Charge 7 11 nC IF = 6A, diF/dt = 100A/s Notes: 1: RJA is the sum of the junction-to-case and case-to- ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RJA is determined by the user's board design. a) 81C/W when mounted on a 1in2 pad of 2 oz copper b) 135C/W when mounted on a minimum pad . Scale 1:1 on letter size paper 2: Pulse Test: Pulse Width < 300 us, Duty Cycle < 2.0%. 3: Starting TJ = 25C, L = 1mH, IAS = 7.3A, VDD = 40V, VGS = 10V. FDS8949 Rev. B1 2 www.fairchildsemi.com FDS8949 Dual N-Channel Logic Level PowerTrench(R) MOSFET Electrical Characteristics TJ = 25C unless otherwise noted 20 ID, DRAIN CURRENT (A) 16 NORMALIZED DRAIN TO SOURCE ON-RESISTANCE 3.0 VGS = 10V VGS = 3.5V VGS = 4.5V 12 VGS = 3.0V 8 4 PULSE DURATION = 300s DUTY CYCLE = 20%MAX 0 0.0 0.5 1.0 1.5 2.0 2.5 PULSE DURATION = 300s DUTY CYCLE = 20%MAX 2.5 VGS = 3.0V 2.0 VGS = 3.5V 1.5 VGS = 4.5V 1.0 0.5 VGS = 10V 0 VDS, DRAIN TO SOURCE VOLTAGE (V) 20 70 1.6 ID = 6A VGS = 10V 1.4 1.2 1.0 0.8 0.6 -50 -25 0 25 50 75 100 125 TJ, JUNCTION TEMPERATURE (oC) 150 VDD = 10V 12 TJ = 125oC 8 TJ = 25oC TJ = -55oC 4 0 1.5 2.0 2.5 3.0 3.5 VGS, GATE TO SOURCE VOLTAGE (V) 4.0 Figure 5. Transfer Characteristics FDS8949 Rev. B1 50 40 TJ = 125oC 30 20 TJ = 25oC 2 4 6 8 VGS, GATE TO SOURCE VOLTAGE (V) 10 100 IS, REVERSE DRAIN CURRENT (A) 16 PULSE DURATION = 300s DUTY CYCLE = 20%MAX Figure 4. On-Resistance vs Gate to Source Voltage 20 PULSE DURATION = 300s DUTY CYCLE = 20%MAX ID = 3.5A 60 10 Figure 3. Normalized On Resistance vs Junction Temperature ID, DRAIN CURRENT (A) 16 Figure 2. Normalized On-Resistance vs Drain Current and Gate Voltage rDS(on), DRAIN TO SOURCE ON-RESISTANCE (m) NORMALIZED DRAIN TO SOURCE ON-RESISTANCE Figure 1. On Region Characteristics 4 8 12 ID, DRAIN CURRENT(A) VGS = 0V 10 1 TJ = 125oC TJ = 25oC 0.1 0.01 1E-3 0.2 TJ = -55oC 0.4 0.6 0.8 1.0 VSD, BODY DIODE FORWARD VOLTAGE (V) 1.2 Figure 6. Source to Drain Diode Forward Voltage vs Source Current 3 www.fairchildsemi.com FDS8949 Dual N-Channel Logic Level PowerTrench(R) MOSFET Typical Characteristics TJ = 25C unless otherwise noted 3 10 VGS, GATE TO SOURCE VOLTAGE(V) 10 VDD = 10V Ciss VDD = 30V VDD = 20V 6 CAPACITANCE (pF) 8 4 2 0 0 4 8 12 Qg, GATE CHARGE(nC) Crss 10 16 f = 1MHz VGS = 0V 0.1 1 10 VDS, DRAIN TO SOURCE VOLTAGE (V) 40 Figure 8. Capacitance vs Drain to Source Voltage 10 7 6 1 ID, DRAIN CURRENT (A) IAS, AVALANCHE CURRENT(A) 10 1 Figure 7. Gate Charge Characteristics TJ = 25oC TJ = 125oC 0.1 -3 10 -2 10 -1 0 1 2 VGS = 10V 4 3 VGS = 4.5V 2 1 o RJA = 81 C/W 0 25 10 50 75 100 125 150 TA, Ambient TEMPERATURE (oC) Figure 10. Maximum Continuous Drain Current vs Ambient Temperature 100 10 100us 1 10ms P(PK), PEAK TRANSIENT POWER (W) 100 1ms LIMITED BY PACKAGE 0.1 5 3 10 10 10 10 tAV, TIME IN AVALANCHE(ms) Figure 9. Unclamped Inductive Switching Capability ID, DRAIN CURRENT (A) Coss 2 OPERATION IN THIS AREA MAY BE LIMITED BY rDS(on) 0.01 0.01 0.1 100ms 1s SINGLE PULSE TJ = MAX RATED 10s DC TA = 25oC 1 10 100 300 VDS, DRAIN-SOURCE VOLTAGE (V) Figure 11. Forward Bias Safe Operating Area FDS8949 Rev. B1 VGS = 10V SINGLE PULSE RJA = 135C/W TA = 25C 10 SINGLE PULSE 1 0.7 -4 10 -3 10 -2 -1 0 1 10 10 10 10 t, PULSE WIDTH (s) 2 10 3 10 Figure 12. Single Pulse Maximum Power Dissipation 4 www.fairchildsemi.com FDS8949 Dual N-Channel Logic Level PowerTrench(R) MOSFET Typical Characteristics TJ = 25C unless otherwise noted NORMALIZED THERMAL IMPEDANCE, ZJA 2 1 0.1 DUTY CYCLE-DESCENDING ORDER D = 0.5 0.2 0.1 0.05 0.02 0.01 P(PK) t1 t2 0.01 RJA(t) = r(t)*RJA RJA = 135oC/W SINGLE PULSE 1E-3 -3 10 TJ-TA =P*RJA DUTY FACTOR: D = t1/t2 -2 10 -1 0 10 10 1 10 2 10 3 10 t, RECTANGULAR PULSE DURATION (s) Figure 13. Transient Thermal Response Curve FDS8949 Rev. B1 5 www.fairchildsemi.com FDS8949 Dual N-Channel Logic Level PowerTrench(R) MOSFET Typical Characteristics TJ = 25C unless otherwise noted The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. FACT Quiet SeriesTM GlobalOptoisolatorTM GTOTM HiSeCTM I2CTM i-LoTM ImpliedDisconnectTM IntelliMAXTM ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM Across the board. Around the world.TM The Power Franchise(R) Programmable Active DroopTM ACExTM ActiveArrayTM BottomlessTM Build it NowTM CoolFETTM CROSSVOLTTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FAST(R) FASTrTM FPSTM FRFETTM OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerEdgeTM PowerSaverTM PowerTrench(R) QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM ScalarPumpTM SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TCMTM TinyBoostTM TinyBuckTM TinyPWMTM TinyPowerTM TinyLogic(R) TINYOPTOTM TruTranslationTM UHCTM UniFETTM UltraFET(R) VCXTM WireTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I20 FDS8949 Rev. B1 6 www.fairchildsemi.com FDS8949 Dual N-Channel Logic Level PowerTrench(R) MOSFET TRADEMARKS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com