F-219 (Rev 03MAR20) HLE-130-02-F-DV HLE-110-02-L-DV HLE-116-02-L-DV-K (2.54 mm) .100" HLE SERIES COST-EFFECTIVE RELIABLE SOCKET Mates With: TSW, MTSW, DW, EW, ZW, TLW, TSM, MTLW, HW NO. PINS 1 PER ROW HLE PLATING OPTION 02 DV TAIL OPTION OTHER OPTION SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?HLE -F Leave blank for Surface Mount (Requires -BE for Bottom Entry) = Gold flash on contact, Matte Tin on tail Insulator Material: Black Liquid Crystal Polymer Contact Material: BeCu Plating: Au or Sn over 50 " (1.27 m) Ni Current Rating (HLE/TSM): 4.1 A per pin (2 pins powered) Voltage Rating: 400 VAC Operating Temp Range: -55 C to +125 C Insertion Depth: (1.78 mm) .070" to (3.43 mm) .135", pass-through, or (2.59 mm) .102" min plus board thickness for bottom entry RoHS Compliant: Yes -L -TE = 10 " (0.25 m) Gold on contact, Matte Tin on tail = Through-hole Top Entry -A -PE = Through-hole Pass-through Entry (Requires -BE for Bottom Entry) = Locking Clip (2 positions min.) (Not available with -A) (Manual placement required) 02 thru 50 Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (02-20) (0.15 mm) .006" max (21-50)* *(.004" stencil solution may be available; contact IPG@samtec.com) -K No. of Positions x (2.54) .100 (2.54) .100 RECOGNITIONS = (6.50 mm) .256" DIA Polyimide Film Pick & Place Pad (3 positions min.) Not available with -TE or -PE tail option 02 (5.08) .200 (2.54) .100 For complete scope of recognitions see www.samtec.com/quality 01 -P FILE NO. E111594 ALSO AVAILABLE (0.51) .020 (6.60) .260 (3.05) .120 -PE -TE (1.27) .050 (1.27) .050 -LC (2.30) .090 (7.62) .300 -PE Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM -TR = Tape & Reel Packaging (29 positions max.) -FR (3.86) .152 -P (1.42) .056 -A (2.54) .100 -TE (7.11) .280 x (5.71) .225 (1.60) .063 DIA = Metal Pick & Place Pad (3 positions min.) (3.51) .138 (3.66) .144 * Other platings Note: Some lengths, styles and options are non-standard, non-returnable. = Alignment Pin (4 positions min.) Metal or plastic at Samtec discretion (Not available with -TE, -PE & -LC) -LC PROCESSING (MOQ Required) -BE = Bottom Entry (Not available with -TE) All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. = Full Reel Tape & Reel Packaging (Must order max. quantities per reel. Contact Samtec for parts per reel)