RURG8060 - ON SEMICONDUCTOR

October, 2020 − Rev. 4

1Publication Order Number:

RURG8060/D

Ultrafast Diode

80 A, 600 V

RURG8060

Description

The RURG8060 is an ultrafast diode with low forward voltage drop.

This device is intended for use as freewheeling and clamping diodes in

a variety of switching power supplies and other power switching

applications. It is specially suited for use in switching power supplies

and industrial application.

Features

•Ultrafast Recovery, trr = 85 ns (@ IF = 80 A )

•Max Forward Voltage, VF = 1.6 V (@ TC = 25 °C )

•600 V Reverse Voltage and High Reliability

•Avalanche Energy Rated

•This Device is Pb−Free and is RoHS Compliant

Applications

•Switching Power Supplies

•Power Switching Circuits

•General Purpose

ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise noted)

Rating Symbol Value Unit

Peak Repetitive Reverse Voltage VRRM 600 V

Working Peak Reverse Voltage VRWM 600 V

DC Blocking Voltage VR600 V

Average Rectified Forward Current

(TC = 72 °C)

IF(AV) 80 A

Repetitive Peak Surge Current

(Square Wave, 20 kHz)

IFRM 160 A

Nonrepetitive Peak Surge Current

(Halfwave 1 Phase, 60 Hz)

IFSM 800 A

Maximum Power Dissipation PD180 W

Avalanche Energy

(See Figure 7 and Figure 8)

EAVL 50 mJ

Operating and Storage Temperature TSTG, TJ−65 to

+175

°C

Stresses exceeding those listed in the Maximum Ratings table may damage the

device. If any of these limits are exceeded, device functionality should not be

assumed, damage may occur and reliability may be affected.

www.onsemi.com

JEDEC STYLE 2 LEAD TO−247

340CL

MARKING DIAGRAM

$Y&Z&3&K

RURG8060

See detailed ordering and shipping information on page 2 of

this data sheet.

ORDERING INFORMATION

ANODE

CATHODE

$Y = ON Semiconductor Logo

&Z = Assembly Plant Code

&3 = Numeric Date Code

&K = Lot Code

RURG80100 = Specific Device Code

1. Cathode 2. Anode

CATHODE

(BOTTOM

SIDE METAL)

RURG8060

www.onsemi.com

PACKAGE MARKING AND ORDERING INFORMATION

Part Number Package Brand

RURG8060 TO−247−2L RURG8060

ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)

Symbol Parameter Test Conditions Min Typ Max Unit

VFInstantaneous Forward Voltage

(Pulse Width = 300 ms, Duty Cycle = 2%)

IF = 80 A 1.6 V

IF = 80 A,

TC = 150°C

1.4 V

IRInstantaneous Reverse Current VR = 600 V 250 mA

VR = 600 V

TC = 150°C

2.0 mA

trr Reverse Recovery Time (See Figure 6 )

Summation of ta + tb

IF = 1 A,

dlF/dt = 100 A/ms

75 ns

IF = 80 A,

dIF/dt = 100 A/ms

85 ns

taTime to Reach Peak Reverse Current (See Figure 6) IF = 80 A,

dIF/dt = 100 A/ms

40 ns

tbTime from Peak IRM to Projected Zero Crossing of IRM

Based on a Straight Line from Peak IRM Through 25%

of IRM (See Figure 6)

IF = 80 A,

dIF/dt = 100 A/ms

25 ns

RqJC Thermal Resistance Junction to Case 0.83 °C/W

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product

performance may not be indicated by the Electrical Characteristics if operated under different conditions.

RURG8060

www.onsemi.com

TYPICAL PERFORMANCE CURVES

Figure 1. Forward Current vs. Forward Voltage Figure 2. Reverse Current vs. Reverse Voltage

Figure 3. trr, ta and tb Curves vs. Forward Current Figure 4. Current Derating Curve

IR, Reverse Current (mA)

VR, Reverse Voltage (V)

, Forward Current (A)

, Forward Voltage (V)

IF(AV), Average Forward Current (A)

TC, Case Temperature (5C)

t, Times (ns)

, Forward Current (A)

400

100

0 0.5 1.0 1.5 2.0 2.5 3.0

175oC

100oC

25oC

1000

100

0.1

0.01 0 100 200 300 400 500 600

175oC

100oC

25oC

trr

011080

100

25 50 75 100 125 150 175

SQ. WAVE

RURG8060

www.onsemi.com

TEST CIRCUITS AND WAVEFORMS

Figure 5. Trr Test Circuit Figure 6. Trr Waveforms and Definitions

Figure 7. Avalanche Energy Test Circuit Figure 8. Avalanche Current and Voltage Waveforms

I = 1.6 A

L = 40 mH

R < 0.1 W

EAVL = 1/2LI2 [VR(AVL)/(VR(AVL)−VDD)]

Q1 = IGBT (BVCES > DUT VR(AVL))

IRM

VDD

IGBT

CURRENT

SENSE

DUT

−

dIF

Trr

tatb

0.25IRM

DUT

CURRENT

SENSE

VDD

−

VDD

Q1I

t0t1t2

VAVL

VGE AMPLITUDE AND

RG CONTROL dlF/dt

t1 AND t2 CONTROL IF

XXXX = Specific Device Code

A = Assembly Location

Y = Year

WW = Work Week

ZZ = Assembly Lot Code

*This information is generic. Please refer to

device data sheet for actual part marking.

Pb−Free indicator, “G” or microdot “G”, may

or may not be present. Some products may

not follow the Generic Marking.

GENERIC

MARKING DIAGRAM*

AYWWZZ

XXXXXXX

TO−247−2LD

CASE 340CL

ISSUE A

DATE 03 DEC 2019

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the

rights of others.

98AON13850G

DOCUMENT NUMBER:

DESCRIPTION:

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

PAGE 1 OF 1

TO−247−2LD

www.onsemi.com

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

TECHNICAL SUPPORT

North American Technical Support:

Voice Mail: 1 800−282−9855 Toll Free USA/Canada

Phone: 011 421 33 790 2910

LITERATURE FULFILLMENT:

Email Requests to: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Europe, Middle East and Africa Technical Support:

Phone: 00421 33 790 2910

For additional information, please contact your local Sales Representative

◊