19-4734; Rev 7/09 DS1971 256-Bit EEPROM iButton SPECIAL FEATURES COMMON iButton FEATURES 256-bit Electrically Erasable Programmable Read Only Memory (EEPROM) communicates with the economy of one signal plus ground EEPROM organized as one 256-bit page 64-bit one-time programmable application register is automatically write-protected after programming Reduces control, address, data, power, and programming signals to a single data pin 8-bit family code specifies DS1971 communications requirements to reader Reads and writes over a wide voltage range of 2.8V to 6.0V from -40C to +85C F3 MicroCan Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48bit serial number + 8-bit CRC tester) assures absolute traceability because no two parts are alike Multidrop controller for MicroLAN Digital identification and information by momentary contact Chip-based data carrier compactly stores information Data can be accessed while affixed to object Economically communicates to bus master with a single digital signal at 16.3kbps Standard 16mm diameter and 1-Wire protocol ensure compatibility with iButton family Button shape is self-aligning with cupshaped probes Durable stainless steel case engraved with registration number withstands harsh environments Easily affixed with self-stick adhesive backing, latched by its flange, or locked with a ring pressed onto its rim Presence detector acknowledges when reader first applies voltage ORDERING INFORMATION DS1971-F3+ DS1971-F5+ F5 MicroCan F3 MicroCan F5 MicroCan +Denotes a lead(Pb)-free/RoHS-compliant package. EXAMPLES OF ACCESSORIES DS9096P DS9101 DS9093RA DS9093F DS9092 iButton and 1-Wire are registered trademarks of Maxim Integrated Products, Inc. 1 of 4 Self-Stick Adhesive Pad Multi-Purpose Clip Mounting Lock Ring Snap-in Fob iButton Probe DS1971 iButton DESCRIPTION The DS1971 256-bit EEPROM iButton is a rugged read/write data carrier that identifies and stores relevant information about the product or person to which it is attached. This information can be accessed with minimal hardware: for example, a single port pin of a microcontroller. The DS1971 consists of a factory-lasered registration number that includes a unique 48-bit serial number, an 8-bit CRC, and an 8-bit Family Code (14H) plus 256 bits of EEPROM. The power to program and read the DS1971 is derived entirely from the 1-Wire communication line. Data is transferred serially via the 1-Wire protocol which requires only a single data lead and a ground return. The 48-bit serial number that is factorylasered into each DS1971 provides a guaranteed unique identity which allows for absolute traceability. The durable MicroCan package is highly resistant to harsh environments such as dirt, moisture, and shock. Its compact button-shaped profile is self-aligning with cup-shaped receptacles, allowing the DS1971 to be used easily by human operators or automatic equipment. Accessories permit the DS1971 to be mounted on printed circuit boards, plastic key fobs, photo-ID badges, ID bracelets, and many other objects. Applications include work-in-progress tracking, electronic travelers, access control and storage of calibration constants. OVERVIEW The block diagram in Figure 1 shows the relationships between the major control and memory sections of the DS1971. The DS1971 has four main data components: 1) 64-bit lasered ROM, 2) 256-bit EEPROM data memory with scratchpad, 3) 64-bit one-time programmable application register with scratchpad, and 4) 8-bit status memory. The bus master must first provide one of the ROM Function Commands before the memory functions become accessible. All data is read and written least significant bit first. The DS1971 contains the same memory chip as the DS2430A. For a full description of the logical behavior, refer to the DS2430A data sheet. 2 of 4 DS1971 DS1971 BLOCK DIAGRAM Figure 1 3 of 4 DS1971 REVISION HISTORY REVISION DATE 071508 7/09 DESCRIPTION Updated the F3 MicroCan and F5 MicroCan face brands with the latest per PCN H020201. Conversion to lead(Pb)-free; removal of bullet "Designed to meet UL#913 (4th Edit.)...." PAGES CHANGED 1 1 4 of 4 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2009 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Maxim Integrated: DS1971-F5+ DS1971-F3+