DL4728
THRU
DL4764
1 Watt
Zener Diode
3.3 to 100 Volts
Features
• High Reliability
• Very Sharp Reverse Characteristic
• Low Reverse Current Level
Maximum Ratings
• Operating Temperature: -65 ℃ to +175 ℃
• Storage Temperature: -65 ℃ to +175 ℃
• 1 Watt DC Power Dissipation
• Maximum Thermal Resistance: 100K/W Junction To Ambient
Test Conditions: I = 9.5mm(3/8”),TL = constant
• Maximum Forward Voltage @ 200mA: 1.2 Volts
Figure 2 - Derating Curve
Power Dissipation (W) - Versus - Temperature ℃
Temperature ℃
25 100 150
200
W
0.5
1.0
Typical Temperature Coefficient (mV/ ℃) – versus – Zener Voltage (VZ)
Figure 1 - Typical Temperature Coefficient
0 20 40
0
20
40
mV/ ℃
VZ
omponents
20736 Marilla Street Chatsworth

 !"#
$% !"#
MCC
GLASS MELF
SUGGESTED SOLDER
PAD LAYOUT
INCHES
MM
DIM MIN MAX MIN MAX NOTE
A .190 .205 4.80 5.20
B --- .022 --- .55 Nominal
C .095 .105 2.40 2.67 ∅
A
B
C
Cathode Mark
.210”
.035”
.115”
Revision: 7 2008/05/13
TM
Micro Commercial Components
www.mccsemi.com
1 of 3
M C C
ELECTRICAL CHARACTERISTICS @25°C
MCC
PART
NUMBER
ZENER
VOLTAGE
VZ
TEST
CURRENT
IZT
MAXIMUM
DYNAMIC
IMPEDANCE
ZZT @ IZT
MAXIMUM
REVERSE
CURRENT
IR @ VR
TEST
VOLTAGE
VR
MAXIMUM
REGULATOR
CURRENT
IZM
TA = 50°C
MAXIMUM
KNEE
IMPEDANCE
ZZK @ IZK
TEST
CURRENT
IZK
MAXIMUM
SURGE
CURRENT
IS
VOLTS mA OHMS µA VOLTS mA OHMS mA mA
DL4728 3.3 76 10 100 1 276 400 1.0 1280
DL4729 3.6 69 10 100 1 252 400 1.0 1260
DL4730 3.9 64 9 50 1 234 400 1.0 1190
DL4731 4.3 58 9 10 1 217 400 1.0 1070
DL4732 4.7 53 8 10 1 193 500 1.0 970
DL4733 5.1 49 7 10 1 178 550 1.0 890
DL4734 5.6 45 5 10 2 162 600 1.0 810
DL4735 6.2 41 2 10 3 146 700 1.0 730
DL4736 6.8 37 3.5 10 4 133 700 1.0 660
DL4737 7.5 34 4.0 10 5 121 700 0.5 605
DL4738 8.2 31 4.5 10 6 110 700 0.5 550
DL4739 9.1 28 5.0 10 7 100 700 0.5 500
DL4740 10 25 7 10 7.6 91 700 0.25 454
DL4741 11 23 8 5 8.4 83 700 0.25 414
DL4742 12 21 9 5 9.1 76 700 0.25 380
DL4743 13 19 10 5 9.9 69 700 0.25 344
DL4744 15 17 14 5 11.4 61 700 0.25 304
DL4745 16 15.5 16 5 12.2 57 700 0.25 285
DL4746 18 14 20 5 13.7 50 750 0.25 250
DL4747 20 12.5 22 5 15.2 45 750 0.25 225
DL4748 22 11.5 23 5 16.7 41 750 0.25 205
DL4749 24 10.5 25 5 18.2 38 750 0.25 190
DL4750 27 9.5 35 5 20.6 34 750 0.25 170
DL4751 30 8.5 40 5 22.8 30 1000 0.25 150
DL4752 33 7.5 45 5 25.1 27 1000 0.25 135
DL4753 36 7.0 50 5 27.4 25 1000 0.25 125
DL4754 39 6.5 60 5 29.7 23 1000 0.25 115
DL4755 43 6.0 70 5 32.7 22 1500 0.25 110
DL4756 47 5.5 80 5 35.8 19 1500 0.25 95
DL4757 51 5.0 95 5 38.8 18 1500 0.25 90
DL4758 56 4.5 110 5 42.6 16 2000 0.25 80
DL4759 62 4.0 125 5 47.1 14 2000 0.25 70
DL4760 68 3.7 150 5 51.7 13 2000 0.25 65
DL4761 75 3.3 175 5 56.0 12 2000 0.25 60
DL4762 82 3.0 200 5 62.2 11 3000 0.25 55
DL4763 91 2.8 250 5 69.2 10 3000 0.25 50
DL4764 100 2.5 350 5 76.0 9 3000 0.25 45
NOTE 1 The JEDEC type numbers shown have A 5% tolerance on nominal zener voltage.
No suffix signifies A 10% tolerance, C signifies 2%, and D signifies 1% tolerance.
NOTE 2 The zener impedance is derived from the 60Hz AC voltage, which results when an AC current having an rms value equal to
10% of the DC zener current (Izt or Izk) is superimposed on Izt or Izk. Zener impedance is measured at two points to insure
a sharp knee on the breakdown curve and eliminate unstable units.
NOTE 3 The reverse surge current is measured at 25oC ambient using a 1/2 square wave or equivalent sine wave pulse 1/120 second
duration superimposed on Izt
NOTE 4 Voltage measurements to be performed 90 seconds after application of DC current.
DL4728 thru DL4764
Revision: 7 2008/05/13
TM
Micro Commercial Components
www.mccsemi.com
2 of 3
MCC
Revision: 7 2008/05/13
TM
Micro Commercial Components
www.mccsemi.com
3 of 3
products are represented on our website, harmless against all damages.
***APPLICATIONS DISCLAIMER***
***IMPORTANT NOTICE***
Aerospace or Military Applications.
Products offer by Micro Commercial Components Corp .are not intended for use in Medical,
Micro Commercial Components Corp
. reserves the right to make changes without further notice to any
product herein to make corrections, modifications , enhancements , improvements , or other changes .
Micro Commercial Components Corp .does not assume any liability arising out of the application or
use of any product described herein; neither does it convey any license under its patent rights ,nor
the rights of others . The user of products in such applications shall assume all risks of such use
and will agree to hold Micro Commercial Components Corp .and all the companies whose
Ordering Information
Device Packing
(Part Number)-TP Tape&Reel;5Kpcs/Reel