E2GN-M12KN05-WP-C1 5M - Omron Automation and Safety

Cylindrical Proximity Sensor

E2GN

High quality at exceptional cost

• M12 and M18 models with standard sensing range.

Ordering Information

Ratings and Specifications (DC 3-wire Models)

Size Sensing

Distance Connection Body Material Model Operation Mode : NO

Output Configuration: PNP Output Configuration: NPN

Shielded

M12

Pre-wired

Brass

E2GN-M12KS02-WP-B1 E2GN-M12KS02-WP-C1

Connector E2GN-M12KS02-M1-B1 E2GN-M12KS02-M1-C1

M18

Pre-wired E2GN-M18KS05-WS-B1 E2GN-M18KS05-WS-C1

Connector E2GN-M18KS05-M1-B1 E2GN-M18KS05-M1-C1

Non-

Shielded

M12

Pre-wired E2GN-M12KN05-WP-B1 E2GN-M12KN05-WP-C1

Connector E2GN-M12KN05-M1-B1 E2GN-M12KN05-M1-C1

M18

Pre-wired E2GN-M18KN08-WS-B1 E2GN-M18KN08-WS-C1

Connector E2GN-M18KN08-M1-B1 E2GN-M18KN08-M1-C1

Size M12 M18

Shielded Shielded Non-Shielded Shielded Non-Shielded

Item Model E2GN-M12KS02-@@-B1 E2GN-M12KN05-@@-B1 E2GN-M18KS05-@@-B1 E2GN-M18KN08-@@-B1

E2GN-M12KS02-@@-C1 E2GN-M12KN05-@@-C1 E2GN-M18KS05-@@-C1 E2GN-M18KN08-@@-C1

Sensing distance 2mm 5mm 5mm 8mm

Power supply voltage 10 to 30 VDC, Ripple (p-p): 10% max.

Output type -B1 models: PNP open collector

-C1 models: NPN open collector

Control

output

Load current 200 mA max.

Residual voltage 3 V max. (load current: 200 mA, cable length: 2 m)

Indicator Operation indicator (Red)

Operation mode

(with sensing object approaching)

Protection circuits Reversed power supply polarity protection, Output short-circuit protection, Reversed output polarity protec-

tion

Ambient temperature range Operating/Storage: −25 °C to 70 °C (with no icing or condensation)

Ambient humidity range Operating/Storage: 35% to 95% (with no icing or condensation)

Degree of protection IEC60529: IP67, EN60947-5-2: EMC

Mounting torque 10 N·m

2 mm

5 mm

8 mm

E2GN

Engineering Data (Typical)

I/O Circuit Diagrams

Note: are the pins’ numbers of the Connector.

Shielded Models

E2GN-M12KS02 E2GN-M18KS05

Non-Shielded Models

E2GN-M12KN05-WP-B1 E2GN-M18KN08-WS-B1

2.5

2.0

1.5

1.0

0.5

−6−4−20 2 46

Distance X (mm)

Distance Y (mm)

−10 −50 510

Distance X (mm)

Distance Y (mm)

−6−4−20 2 46

Distance X (mm)

Distance Y (mm)

−8−4

−6−20248

Distance X (mm)

Distance Y (mm)

0 V

+ V

Load

Proximity

Sensor

main

circuit Black

Blue

Brown

(10 to 30 VDC)

Blue

PNP output

E2GN-M12KS02-WP-B1

E2GN-M12KS02-M1-B1

E2GN-M18KS05-WS-B1

E2GN-M18KS05-M1-B1

E2GN-M12KN05-WP-B1

E2GN-M12KN05-M1-B1

E2GN-M18KN08-WS-B1

E2GN-M18KN08-M1-B1

0 V

+ V

Load

Proximity

Sensor

main

circuit Black

Blue

Brown

(10 to 30 VDC)

NPN output

E2GN-M12KS02-WP-C1

E2GN-M12KS02-M1-C1

E2GN-M18KS05-WS-C1

E2GN-M18KS05-M1-C1

E2GN-M12KN05-WP-C1

E2GN-M12KN05-M1-C1

E2GN-M18KN08-WS-C1

E2GN-M18KN08-M1-C1

134

E2GN

Dimensions

E2GN-M12KS02-WP-B1

E2GN-M12KS02-WP-C1

E2GN-M12KN05-WP-B1

E2GN-M12KN05-WP-C1

E2GN-M12KS02-M1-B1

E2GN-M12KS02-M1-C1

E2GN-M12KN05-M1-B1

E2GN-M12KN05-M1-C1

E2GN-M18KS05-WS-B1

E2GN-M18KS05-WS-C1

E2GN-M18KN08-WS-B1

E2GN-M18KN08-WS-C1

E2GN-M18KS05-M1-B1

E2GN-M18KS05-M1-C1

E2GN-M18KN08-M1-B1

E2GN-M18KN08-M1-C1

t: mm)

Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.

17 4

M12X1

2-Clamping nuts

4-dia Cable

Operation indicator (RED) 17 4

M12X1

10.5-dia 4-dia Cable

Operation indicator (RED)

44.4

M12X1 M12X1

Operation indicator (RED) 44.8

44.4

M12X1 M12X1

Operation indicator (RED)

M18X1

5-dia Cable

Operation indicator (RED)

2-Clamping nuts

24 24

5-dia Cable

M18X1

16-dia

Operation indicator (RED)

M12X1

41.6

M18X1

Operation indicator (RED)

445.2

M12X1

M18X1

Operation indicator (RED)

4845.2

Terms and Conditions of Sale

1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed

part of all quotes, agreements, purchase orders, acknowledgments, price lists,

catalogs, manuals, brochures and other documents, whether electronic or in

writing, relating to the sale of products or services (collectively, the "Products")

by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron

objects to any terms or conditions proposed in Buyer’s purchase order or other

documents which are inconsistent with, or in addition to, these Terms.

2. Prices; Payment Terms. All prices stated are current, subject to change with-

out notice by Omron. Omron reserves the right to increase or decrease prices

on any unshipped portions of outstanding orders. Payments for Products are

due net 30 days unless otherwise stated in the invoice.

3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices

sent to Buyer after deducting transportation charges, taxes and duties, and will

be allowed only if (i) the invoice is paid according to Omron’s payment terms

and (ii) Buyer has no past due amounts.

4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or

the maximum legal rate, whichever is less, on any balance not paid within the

stated terms.

5. Orders. Omron will accept no order less than $200 net billing.

6. Governmental Approvals. Buyer shall be responsible for, and shall bear all

costs involved in, obtaining any government approvals required for the impor-

tation or sale of the Products.

7. Taxes. All taxes, duties and other governmental charges (other than general

real property and income taxes), including any interest or penalties thereon,

imposed directly or indirectly on Omron or required to be collected directly or

indirectly by Omron for the manufacture, production, sale, delivery, importa-

tion, consumption or use of the Products sold hereunder (including customs

duties and sales, excise, use, turnover and license taxes) shall be charged to

and remitted by Buyer to Omron.

8. Financial. If the financial position of Buyer at any time becomes unsatisfactory

to Omron, Omron reserves the right to stop shipments or require satisfactory

security or payment in advance. If Buyer fails to make payment or otherwise

comply with these Terms or any related agreement, Omron may (without liabil-

ity and in addition to other remedies) cancel any unshipped portion of Prod-

ucts sold hereunder and stop any Products in transit until Buyer pays all

amounts, including amounts payable hereunder, whether or not then due,

which are owing to it by Buyer. Buyer shall in any event remain liable for all

unpaid accounts.

9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation

unless Buyer indemnifies Omron against all related costs or expenses.

10. Force Majeure. Omron shall not be liable for any delay or failure in delivery

resulting from causes beyond its control, including earthquakes, fires, floods,

strikes or other labor disputes, shortage of labor or materials, accidents to

machinery, acts of sabotage, riots, delay in or lack of transportation or the

requirements of any government authority.

11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:

a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship

except in “break down” situations.

b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall

constitute delivery to Buyer;

c. All sales and shipments of Products shall be FOB shipping point (unless oth-

erwise stated in writing by Omron), at which point title and risk of loss shall

pass from Omron to Buyer; provided that Omron shall retain a security inter-

est in the Products until the full purchase price is paid;

d. Delivery and shipping dates are estimates only; and

e. Omron will package Products as it deems proper for protection against nor-

mal handling and extra charges apply to special conditions.

12. Claims. Any claim by Buyer against Omron for shortage or damage to the

Products occurring before delivery to the carrier must be presented in writing

to Omron within 30 days of receipt of shipment and include the original trans-

portation bill signed by the carrier noting that the carrier received the Products

from Omron in the condition claimed.

13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the

Products will be free from defects in materials and workmanship for a period of

twelve months from the date of sale by Omron (or such other period expressed

in writing by Omron). Omron disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,

EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-

ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.

BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR

INTENDED USE. Omron further disclaims all warranties and responsibility of

any type for claims or expenses based on infringement by the Products or oth-

erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-

gation hereunder shall be, at Omron’s election, to (i) replace (in the form

originally shipped with Buyer responsible for labor charges for removal or

replacement thereof) the non-complying Product, (ii) repair the non-complying

Product, or (iii) repay or credit Buyer an amount equal to the purchase price of

the non-complying Product; provided that in no event shall Omron be responsi-

ble for warranty, repair, indemnity or any other claims or expenses regarding

the Products unless Omron’s analysis confirms that the Products were prop-

erly handled, stored, installed and maintained and not subject to contamina-

tion, abuse, misuse or inappropriate modification. Return of any Products by

Buyer must be approved in writing by Omron before shipment. Omron Compa-

nies shall not be liable for the suitability or unsuitability or the results from the

use of Products in combination with any electrical or electronic components,

circuits, system assemblies or any other materials or substances or environ-

ments. Any advice, recommendations or information given orally or in writing,

are not to be construed as an amendment or addition to the above warranty.

See http://www.omron247.com or contact your Omron representative for pub-

lished information.

14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE

FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY

WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS

BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.

Further, in no event shall liability of Omron Companies exceed the individual

price of the Product on which liability is asserted.

15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and

their employees from and against all liabilities, losses, claims, costs and

expenses (including attorney's fees and expenses) related to any claim, inves-

tigation, litigation or proceeding (whether or not Omron is a party) which arises

or is alleged to arise from Buyer's acts or omissions under these Terms or in

any way with respect to the Products. Without limiting the foregoing, Buyer (at

its own expense) shall indemnify and hold harmless Omron and defend or set-

tle any action brought against such Companies to the extent based on a claim

that any Product made to Buyer specifications infringed intellectual property

rights of another party.

16. Property; Confidentiality. Any intellectual property in the Products is the exclu-

sive property of Omron Companies and Buyer shall not attempt to duplicate it

in any way without the written permission of Omron. Notwithstanding any

charges to Buyer for engineering or tooling, all engineering and tooling shall

remain the exclusive property of Omron. All information and materials supplied

by Omron to Buyer relating to the Products are confidential and proprietary,

and Buyer shall limit distribution thereof to its trusted employees and strictly

prevent disclosure to any third party.

17. Export Controls. Buyer shall comply with all applicable laws, regulations and

licenses regarding (i) export of products or information; (iii) sale of products to

“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of

regulated technology or information.

18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right

and no course of dealing between Buyer and Omron shall operate as a waiver

of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder

without Omron's written consent. (c) Law. These Terms are governed by the

law of the jurisdiction of the home office of the Omron company from which

Buyer is purchasing the Products (without regard to conflict of law princi-

ples). (d) Amendment. These Terms constitute the entire agreement between

Buyer and Omron relating to the Products, and no provision may be changed

or waived unless in writing signed by the parties. (e) Severability

. If any provi-

sion hereof is rendered ineffective or invalid, such provision shall not invalidate

any other provision. (f) Setoff. Buyer shall have no right to set off any amounts

against the amount owing in respect of this invoice. (g) Definitions. As used

herein, “including” means “including without limitation”; and “Omron Compa-

nies” (or similar words) mean Omron Corporation and any direct or indirect

subsidiary or affiliate thereof.

Certain Precautions on Specifications and Use

1. Suitability of Use. Omron Companies shall not be responsible for conformity

with any standards, codes or regulations which apply to the combination of the

Product in the Buyer’s application or use of the Product. At Buyer’s request,

Omron will provide applicable third party certification documents identifying

ratings and limitations of use which apply to the Product. This information by

itself is not sufficient for a complete determination of the suitability of the Prod-

uct in combination with the end product, machine, system, or other application

or use. Buyer shall be solely responsible for determining appropriateness of

the particular Product with respect to Buyer’s application, product or system.

Buyer shall take application responsibility in all cases but the following is a

non-exhaustive list of applications for which particular attention must be given:

(i) Outdoor use, uses involving potential chemical contamination or electrical

interference, or conditions or uses not described in this document.

(ii) Use in consumer products or any use in significant quantities.

(iii) Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety equip-

ment, and installations subject to separate industry or government regulations.

(iv) Systems, machines and equipment that could present a risk to life or prop-

erty. Please know and observe all prohibitions of use applicable to this Prod-

uct.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS

RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT

ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO

ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-

ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE

OVERALL EQUIPMENT OR SYSTEM.

2. Programmable Products. Omron Companies shall not be responsible for the

user’s programming of a programmable Product, or any consequence thereof.

3. Performance Data. Data presented in Omron Company websites, catalogs

and other materials is provided as a guide for the user in determining suitabil-

ity and does not constitute a warranty. It may represent the result of Omron’s

test conditions, and the user must correlate it to actual application require-

ments. Actual performance is subject to the Omron’s Warranty and Limitations

of Liability.

4. Change in Specifications. Product specifications and accessories may be

changed at any time based on improvements and other reasons. It is our prac-

tice to change part numbers when published ratings or features are changed,

or when significant construction changes are made. However, some specifica-

tions of the Product may be changed without any notice. When in doubt, spe-

cial part numbers may be assigned to fix or establish key specifications for

your application. Please consult with your Omron’s representative at any time

to confirm actual specifications of purchased Product.

5. Errors and Omissions. Information presented by Omron Companies has been

checked and is believed to be accurate; however, no responsibility is assumed

for clerical, typographical or proofreading errors or omissions.

OMRON CANADA, INC. • HEAD OFFICE

Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com

OMRON ELECTRONICS DE MEXICO • HEAD OFFICE

México DF • 52.

55.59.01.43.00

• 001.800.556.6766 • mela@omron.com

OMRON ELECTRONICS DE MEXICO • SALES OFFICE

Apodaca, N.L. • 52.81.11.56.99.20 • 001.800.556.6766 • mela@omron.com

OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE

São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br

OMRON ARGENTINA • SALES OFFICE

Cono Sur • 54.11.4783.5300

OMRON CHILE • SALES OFFICE

Santiago • 56.9.9917.3920

OTHER OMRON LATIN AMERICA SALES

54.11.4783.5300

OMRON INDUSTRIAL AUTOMATION • THE AMERICAS HEADQUARTERS

Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com

OMRON EUROpE B.V. •

Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands.

•

Tel: +31 (0) 23 568 13 00

Fax: +31 (0) 23 568 13 88

•

www.industrial.omron.eu