MILITARY DATA SHEET Original Creation Date: 06/20/95 Last Update Date: 12/10/96 Last Major Revision Date: 06/20/95 MNLF155A-X REV 0BL MONOLITHIC JFET INPUT OPERATIONAL AMPLIFIERS Industry Part Number NS Part Numbers LF155A LF155AH/883 Prime Die LF155C Processing Subgrp Description MIL-STD-883, Method 5004 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MNLF155A-X REV 0BL Electrical Characteristics DC PARAMETERS: (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Rs = 50 Ohms, Vcc = +15V, Vcm = 0V SYMBOL Vio Iio +Iib -Iib PARAMETER CONDITIONS NOTES Input Offset Voltage Input Offset Current Input Bias Current Input Bias Current PINNAME MIN MAX UNIT SUBGROUPS -2 2 mV 1 -2.5 2.5 mV 2, 3 Vcc = +20V -2 2 mV 1 Vcc = +20V -2.5 2.5 mV 2, 3 Vcc = +20V -0.02 0.02 nA 1 Vcc = +20V -10 10 nA 2, 3 Vcc = +20V -0.1 0.08 nA 1 Vcc = +20V -10 25 nA 2, 3 Vcc = +20V, Vcm = -16V -0.1 0.1 nA 1 Vcc = +20V, Vcm = -16V -10 50 nA 2, 3 Vcc = +20V, Vcm = 16V -0.1 3.5 nA 1 Vcc = +20V, Vcm = 16V -10 60 nA 2, 3 Vcc = +20V -0.1 0.08 nA 1 Vcc = +20V -10 25 nA 2, 3 Vcc = +20V, Vcm = -16V -0.1 0.1 nA 1 Vcc = +20V, Vcm = -16V -10 50 nA 2, 3 Vcc = +20V, Vcm = 16V -0.1 3.5 nA 1 Vcc = +20V, Vcm = 16V -10 60 nA 2, 3 +PSRR Power Supply Rejection Ratio +Vcc = 20V to 10V, -Vcc = -20V 85 dB 1, 2, 3 -PSRR Power Supply Rejection Ratio -Vcc = -20V to -10V, +Vcc = 20V 85 dB 1, 2, 3 CMRR Common Mode Rejection Ratio Vcm = +11V 85 dB 1, 2, 3 Icc Power Supply Current 4 mA 1 14 mA 2, 3 -45 -15 mA 1 -35 -10 mA 2 -65 -15 mA 3 15 45 mA 1 10 35 mA 2 15 65 mA 3 +Ios -Ios Short Circuit Current Short Circuit Current Vout = 0V Vout = 0V 2 MILITARY DATA SHEET MNLF155A-X REV 0BL Electrical Characteristics DC PARAMETERS:(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Rs = 50 Ohms, Vcc = +15V, Vcm = 0V SYMBOL PARAMETER CONDITIONS NOTES Vcm Common Mode Voltage Range 1 Delta Vio/Delta T Average TC of Input Offset Voltage 2 +Vop Output Voltage Swing Rl = 10K Ohms Rl = 2K Ohms -Vop Output Voltage Swing 3 Large Signal Voltage Gain MIN -11 Rl=2K Ohms, Vout = 0 to -10V UNIT SUBGROUPS 11 V 1, 2, 3 5 uV/C 2, 3 V 4, 5, 6 10 V 4, 5, 6 -12 V 4, 5, 6 -10 V 4, 5, 6 3 Rl=2K Ohms, Vout = 0 to 10V MAX 12 Rl = 10K Ohms Rl = 2K Ohms Avs PINNAME 50 V/mV 4 25 V/mV 5, 6 50 V/mV 4 25 V/mV 5, 6 Sr+ Slew Rate Av = 1 3 V/uS 7 Sr- Slew Rate Av = 1 3 V/uS 7 DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Rs = 50 Ohms, Vcc = +15V, Vcm = 0V. "Deltas not required on B-Level product. Deltas required for S-Level product ONLY as specified on Internal Processing Instructions (IPI)." Vio Input Offset Voltage -1 1 mV 1 Icc Power Supply Current -0.8 0.8 mA 1 Note 1: Note 2: Note 3: Parameter Guaranteed by CMRR test Bench tested. Parameter Guaranteed by +Avs test. 3 MILITARY DATA SHEET MNLF155A-X REV 0BL Graphics and Diagrams GRAPHICS# H08CRE DESCRIPTION (blank) See attached graphics following this page. 4