1N957B-1 thru 1N986B-1 Silicon Zener Diode Series Rev. V2 Features * 1N962B-1 thru 1N986B-1 Available in JAN, JANTX and JANTXV per MIL-PRF-19500/117 * Standard voltage tolerances are plus/minus 5% with B suffix, 10% with A suffix identification. * Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively. * 500 mW power handling * Hermetically sealed axial-leaded glass DO-35 package. Electrical Specifications: TA = +25C (unless otherwise specified) Normal Zener Voltage VZ Zener Test Current IZT Volts mA Ohms Ohms mA mA mA mA Volts %/C 1N957B-1 6.8 18.5 4.5 700 1.0 55 300 150 5.2 0.050 1N958B-1 7.5 16.5 5.5 700 0.5 50 275 75 5.7 0.058 1N959B-1 8.2 15.0 6.5 700 0.5 45 250 50 6.2 0.065 1N960B-1 9.1 14.0 7.5 700 0.5 41 225 25 6.9 0.068 1N961B-1 10 12.5 8.5 700 0.25 38 200 10 7.6 0.075 1N962B-1 11 11.5 9.5 700 0.25 32 175 5 8.4 0.076 1N963B-1 12 10.5 11.5 700 0.25 31 160 5 9.1 0.077 1N964B-1 13 9.5 13 700 0.25 28 150 5 9.9 0.079 1N965B-1 15 8.5 16 700 0.25 25 130 5 11.4 0.082 1N966B-1 16 7.8 17 700 0.25 24 120 5 12.2 0.083 1N967B-1 18 7.0 21 750 0.25 20 110 5 13.7 0.085 1N968B-1 20 6.2 25 750 0.25 18 100 5 15.2 0.086 1N969B-1 22 5.6 29 750 0.25 16 90 5 16.7 0.087 1N970B-1 24 5.2 33 750 0.25 15 80 5 18.2 0.088 Part #1 Max. Zener Impedance ZZT @ IZT ZZK @ IZK Max. Max. DC Zener Surge Current Current IZM IZSM Max. Reverse Leakage I R @ VR Max. Temperature Coefficient aVZ 1. The JEDEC type numbers shown (B Suffix) have a +5% tolerance on nominal Zener Votlage. The suffix A is used to identify +10% tolerance; suffix C is used to identify +2%: and suffix D is used identify +1%; no suffix indicates +20%. Continued on next page 1 VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.vptcomponents.com for additional data sheets and product information. For further information and support please visit: www.vptcomponents.com 1N957B-1 thru 1N986B-1 Silicon Zener Diode Series Rev. V2 Electrical Specifications: TA = +25C (unless otherwise specified) Normal Zener Voltage VZ Zener Test Current IZT Volts mA Ohms Ohms mA mA mA mA Volts %/C 1N971B-1 27 4.6 41 750 0.25 13 70 5 20.6 0.090 1N972B-1 30 4.2 49 1000 0.25 12 65 5 22.8 0.091 1N973B-1 33 3.8 58 1000 0.25 11 60 5 25.1 0.092 1N974B-1 36 3.4 70 1000 0.25 10 55 5 27.4 0.093 1N975B-1 39 3.2 80 1000 0.25 9.5 46 5 29.7 0.094 1N976B-1 43 3.0 93 1000 0.25 8.8 44 5 32.7 0.095 1N977B-1 47 2.7 105 1500 0.25 7.9 40 5 35.8 0.095 1N978B-1 51 2.5 125 1500 0.25 7.4 37 5 38.8 0.096 1N979B-1 56 2.2 150 2000 0.25 6.8 35 5 42.6 0.096 1N980B-1 62 2.0 185 2000 0.25 6.0 30 5 47.1 0.097 1N981B-1 68 1.8 230 2000 0.25 5.5 28 5 51.7 0.097 1N982B-1 75 1.7 270 2000 0.25 5.0 26 5 56.0 0.098 1N983B-1 82 1.5 330 3000 0.25 4.6 23 5 62.2 0.098 1N984B-1 91 1.4 400 3000 0.25 4.1 21 5 69.2 0.099 1N985B-1 100 1.3 500 3000 0.25 3.7 18 5 76.0 0.110 1N986B-1 110 1.1 750 4000 0.25 3.3 16 5 83.6 0.110 Part #1 Max. Zener Impedance ZZT @ IZT ZZK @ IZK Max. Max. DC Zener Surge Current Current IZM IZSM Max. Reverse Leakage I R @ VR Max. Temperature Coefficient aVZ 1. The JEDEC type numbers shown (B Suffix) have a +5% tolerance on nominal Zener Votlage. The suffix A is used to identify +10% tolerance; suffix C is used to identify +2%: and suffix D is used identify +1%; no suffix indicates +20%. Absolute Maximum Ratings2,3 Thermal Resistance 250C/W Steady-State Power 0.5 W Forward Voltage 1.1 V @ 200 mA Operating / Storage Temperature -65C to +175C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. VPT Components does not recommend sustained operation near these survivability limits. 2 VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.vptcomponents.com for additional data sheets and product information. For further information and support please visit: www.vptcomponents.com 1N957B-1 thru 1N986B-1 Silicon Zener Diode Series Rev. V2 3 VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.vptcomponents.com for additional data sheets and product information. For further information and support please visit: www.vptcomponents.com 1N957B-1 thru 1N986B-1 Silicon Zener Diode Series Rev. V2 Outline Drawing 4 VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.vptcomponents.com for additional data sheets and product information. For further information and support please visit: www.vptcomponents.com 1N957B-1 thru 1N986B-1 Silicon Zener Diode Series Rev. V2 VPT Components All rights reserved. Information in this document is provided in connection with VPT Components' products. These materials are provided by VPT Components as a service to its customers and may be used for informational purposes only. Except as provided in VPT Components' Terms and Conditions of Sale for such products or in any separate agreement related to this document, VPT Components assumes no liability whatsoever. VPT Components assumes no responsibility for errors or omissions in these materials. VPT Components may make changes to specifications and product descriptions at any time, without notice. VPT Components makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF VPT COMPONENTS PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. VPT COMPONENTS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. VPT COMPONENTS SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. VPT Components' products are not intended for use in medical, lifesaving or life sustaining applications. VPT Components' customers using or selling VPT Components' products for use in such applications do so at their own risk and agree to fully indemnify VPT Components for any damages resulting from such improper use or sale. 5 VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.vptcomponents.com for additional data sheets and product information. For further information and support please visit: www.vptcomponents.com