LPV-150-15 - MEAN WELL ENTERPRISES

■Features ■Applications

Suitable for LED related

fixture or appliance

(such as LED Decoration

or Advertisement devices)

■Model Encoding

■Description

LPV-150 and LPVL-150 are 150W single output power supplies that specifically and perfectly work for

LED lighting and LED moving sign applications. As a class II power unit, these two series are housed

with the UL 94V-0 rated flame retardant plastic enclosure. The IP67 design allows every model to fit

the use at dry, damp and wet locations. Both series are constant voltage mode design that various

models with 12V, 15V, 24V, 36V and 48V are offered for LPV-150 where as 12V and 24V are

provided for LPVL-150.

Output voltage

Output wattage

Series name

-12LPV L - 150

Blank: AC input range 180~305VAC

{

L:AC input range 90~132VAC

File Name:LPV,LPVL-150-SPEC 2018-09-30

150W Single Output Switching Power Supply LPV-150 series

IP67

Constant voltage design

90~132VAC input for LPVL-150

180~305VAC input for LPV-150

Fully encapsulated with IP67 level (Note.8)

Class power unit, no FGⅡ

Protections: Short circuit/Overload/Over voltage/

Over temperature

Fully isolated plastic case

Fanless design, cooling by free air convection

100% full load burn-in test

Low cost, high reliability

Listed in UL Sign Component Manual (SAM)

Type HL for use in class I, Division 2 hazardous (Classified)

location luminaires for LPVL-150

2 years warranty

(for Blank type only)

(for LPV-150-12,24 only)

IS 15885(Part 2/Sec13)

R-41027766

THOMAS SAMUEL

(for L type only)

MAX. No. of PSUs

on 16A CIRCUIT

2 units (circuit breaker of type B) / 3 units (circuit breaker of type C) at 230VAC

SPECIFICATION

MODEL LPV -150-12 LPV-150-15 LPV -150-24 LPV-150-36 LPV-150-48

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER

OUTPUT

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME Note.6

HOLD UP TIME (Typ.)

VOLTAGE RANGE Note.4

FREQUENCY RANGE

EFFICIENCY (Typ.)

AC CURRENT

INPUT

INRUSH CURRENT

(Typ.)

LEAKAGE CURRENT

SAFETY

STANDARDS

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSION

OTHERS

NOTE

PACKING

OVERLOAD

OVER VOLTAGE

12V 15V 24V 36V 48V

10A 8A 6.3A 4.2A 3.2A

0 ~ 10A 0 ~ 8A 0 ~ 6.3A 0 ~ 4.2A 0 ~ 3.2A

120W 120W 151.2W 151.2W 153.6W

200mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p

±1.0%

LPV-150: 180 ~ 305VAC 254 ~ 431VDC; LPVL-150: 90~132VAC

47 ~ 63Hz

87%

±2.0%

±5.0%

88% 89% 89% 90%

13.5 ~ 18V 17 ~ 25V 27 ~ 35V 40 ~ 49V 52 ~ 63V

LPV-150: 1.7A/230VAC 1.5A/277VAC; LPVL-150: 3.0A/115VAC

COLD START 60A(twidth=900 s measured at 50% Ipeak) at 230VACμ

LPV-150: 0.25mA / 240VAC LPVL-150:0.25mA / 120VAC

110 ~ 150% rated output power

Protection type : Hiccup mode, recovers automatically after fault condition is removed

Compliance to EN55032 (CISPR32) Class B, EN61000-3-2 Class A( 80 load), EN61000-3-3, EAC TP TC 020≤%

Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteria A, EAC TP TC 020

-25 ~ +65 (Refer to "Derating Curve")℃

20 ~ 90% RH non-condensing

-40 ~ +80 , 10 ~ 95% RH℃

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

703Khrs min. MIL-HDBK-217F (25 )℃

191*63*37.5mm (L*W*H)

1. All parameters NOT specially mentioned are measured at 230VAC(115VAC for LPVL) input, rated load and 25 of ambient temperature.℃

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltage. Please check the static characteristics for more details.

5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the

complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.

7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.

8. Suitable for indoor use or outdoor use without direct sunlight exposure.

9. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

10. For any application note and IP water proof function installation caution, please refer our user manual before using.

https://www.meanwell.com/Upload/PDF/LED_EN.pdf

LPV-150: 0.74Kg;20pcs/15.8Kg/0.95CUFT; LPVL-150: 0.85Kg;20pcs/17Kg/0.95CUFT

Protection type : Shut down o/p voltage, re-power on to recover

150W Single Output Switching Power Supply LPV-150 series

RIPPLE & NOISE (max.) Note.2

VOLTAGE TOLERANCE Note.3

ENVIRONMENT

SAFETY &

EMC

PROTECTION

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

I/P-O/P:3KVAC

I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH℃

File Name:LPV,LPVL-150-SPEC 2018-09-30

LPV-150: 18ms/230VAC 20ms/277VAC at full load; LPVL-150: 10ms/115VAC at full load

LPV-150: 500ms, 50ms / 230VAC 500ms, 50ms / 277VAC; LPVL-150: 1500ms, 50ms / 115VAC

±℃ ℃ ℃0.03%/ (0 ~ 40 for LPV-150-12,15 and LPVL-150-12,24;0~50 for LPV-150-24,36,48)



EMC IMMUNITY

EMC EMISSION

OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down

UL8750,CSA C22.2 No 250.13-12 UL879,CSA C22.2 No.207-M89,BIS IS15885(for LPV-150-12,24 only),,EAC TP TC 004,

IP67 approved. Design refer to EN60950-1

COLD START 75A(twidth=900 s measured at 50% Ipeak) at 115VACμ

Blank type

L type

Blank type

L type

BREAKER 1 units (circuit breaker of type B) / 2 units (circuit breaker of type C) at 115VAC

Blank type

L type Compliance to FCC part 15

L type

Blank type

Design refer to IEC61000-4-2,3,4,5,6,8,11; light industry level, criteria A

Blank type

L type UL8750(type”HL”),CSA C22.2 No 250.13-12 UL879,CSA C22.2 No.207-M89,IP67 approved,

Mechanical Specification

File Name:LPV,LPVL-150-SPEC 2018-09-30

fosc : 65KHz

PWM

O.L.P.

EMI FILTER

RECTIFIERS

POWER

SWITCHING FILTER

RECTIFIERS +V

-V

I/P

CONTROL

Block Diagram

DETECTION

CIRCUIT

O.V.P.

INPUT VOLTAGE (V) 60Hz

180 190 200 210 220 230 240 260 270 280 305

100

Derating CurveDerating Curve Static Characteristics

AMBIENT TEMPERATURE ( )℃

LOAD (%)

250

LOAD (%)

150W Single Output Switching Power Supply LPV-150 series

(HORIZONTAL)

Case No. LPC-150 Unit:mm

PWM fosc : 47KHz

SJTW 14AWG

Recommend Mounting Direction

100

-15 0 15 3004050-25 60 65

LPV-150-12,15

LPV-150-24,36,48

LPVL-150

90 100 105 120 130 132

(Blank type)

(L type)

AC/N(Blue)

AC/L(Brown)

37.5

SJTW 18AWG

+V(Red)

-V(Black)

191

300 20±300 20±

2- 4.5ψ

Tcase

: Max. Case Temperature