KYOCERA Timing Devices Resonators Crystals Oscillators Table of Contents CERAMIC RESONATORS General Description .................................................................................................. 2-7 KBR -Y Series - Surface Mountable -- fo: 380 to 1050 kHz ..................................... 8-9 KBR -B, -BK, -F Series -- fo: 190 to 1050 kHz ..................................................... 10-11 KBR Special Series .................................................................................................... 12 PBRC -A Series - Surface Mountable -- fo: 2.00 to 8.00 MHz................................... 13 PBRC -B/D Series - Surface Mountable -- fo: 2.00 to 36.00 MHz ............................. 14 Tape & Reel Packaging, PBRC-A/B/D ....................................................................... 15 SSR-B Series ............................................................................................................. 16 KBR -M, -MS, -MSA, -MSB Series -- fo: 2.00 to 13.00 MHz ..................................... 17 KBR -MY, MSA Series -- fo: 13.01 to 36.00 MHz ...................................................... 18 KBR -MKC, -MKD, -MKS Series -- fo: 3.45 to 8.00 MHz and 16.00 to 36.00 MHz ...... 19 Tape & Reel Packaging, MHz Ceramic Resonators .................................................. 20 SURFACE ACOUSTIC WAVE RESONATORS General Description ................................................................................................... 21 PAR Series ................................................................................................................ 22 KAR -CS, -CT, -CB, -CD, -CK Series -- fo: 46 to 315 MHz .................................. 23-24 KAR Series Data ........................................................................................................ 25 QUARTZ CRYSTALS KSX Series ................................................................................................................. 26 KT Series ................................................................................................................... 27 CLOCK OSCILLATORS General Description .............................................................................................. 28-30 K50 Series -- fo: 8 to 68 MHz ............................................................................... 31-34 KT11 Series ............................................................................................................... 35 KT12 Series ............................................................................................................... 36 KT14 Series ............................................................................................................... 37 VCO Series ........................................................................................................... 38-42 KXO-01 Series -- fo: 8.0 to 50 MHz ...................................................................... 43-44 KXO-HC/KHO-HC Series -- fo: 1.0 to 80 MHz ..................................................... 45-46 386 Series ............................................................................................................. 47-48 1 Timing Device Product Offering QUARTZ CRYSTALS, RESONATORS and CLOCK OSCILLATORS Oscillating Frequency Product Name Applications Type 1KHz 10KHz 100KHz 1MHz 10MHz 100MHz 1GHz 10GHz Leaded 12.0M 22.0M Telecommunication SMD 12.0M 22.0M Telecommunication Quartz Crystal Leaded KHz Band Micro Processor 960k ~ 1050k 380k ~ 430k 440k ~ 525k 600k ~ 655k SMD Ceramic Resonator 190k ~ 680k 795k ~ 815k 795k ~ 815k 960k ~ 1050k Leaded 1.92M SMD 2.0M Micro Processor Micro Processor 40.0M MHz Band Micro Processor 60.0M Leaded 46M 479M RF Modulator Keyless Entry 479M RF Modulator Keyless Entry Saw Resonator SMD 300M Leaded Clock Oscillator 500k SMD KT 11,12,14 Series 8.0M SMD 12.0M 72M Micro Processor 68M Micro Processor Telecommunication 20.0M VOLTAGE CONTROLLED OSCILLATORS Frequency 500MHz 1GHz 1.5GHz VK Series VK Series YK Series YK Series System JPN CTI CTI+ Cordless Phone PHS DECT CT2+ Transceiver LAN Low Power Transmitter Remote Controller Control Wireless Microphone AMPS TACS NMT NTT Cellular Phone PDC GSM US digital PCN Satellite 2 GPS Application Availability EK Series EK Series Application 2GHz RK Series RK Series AVX/Kyocera Ceramic Resonators kHz BAND CERAMIC RESONATORS Part Series Frequency Range Type Lead Configuration KBR-Y 380 to 1050 kHz SMT Gull Wing Surface Mount KBR-B 190 to 680 kHz Std Qm Standard, Single-in-line, Formed Leads KBR-BK 380 to 655 kHz Std Qm Standard, Single-in-line KBR-F 795 to 1050 kHz High Qm Standard, Single-in-line Specials Per application -- -- MHz BAND CERAMIC RESONATORS Part Series Frequency Range* Type PBRC-A 2.00 to 8.00 MHz SMT without Capacitor PBRC-B/D 2.00 to 36.00 MHz SMT with Built-in Capacitor SSR-B 16.00 to 60.00 MHz Ultraminiature SMT with Built-in Capacitor KBR-MS 2.00 to 3.57 MHz Standard KBR-MSA 3.58 to 8.00 MHz Water resistant KBR-MSB 3.58 to 6.00 MHz "No-Clean" Process only KBR-M 6.01 to 13.00 MHz Standard KBR-MY 13.01 to 16.00 MHz CMOS KBR-MSA 16.00 to 36.00 MHz High Frequency Standard KBR-MKS 3.58 to 8.00 MHz Built-in Capacitor -Low Profile KBR-MKC 3.58 to 8.00 MHz Built-in Capacitor -"No-Clean" Process only KBR-MKD 3.58 to 8.00 MHz, 16.00 to 36 MHz Built-in Capacitor-Water resistant *For additional frequencies consult factory. 3 AVX/Kyocera Ceramic Resonators GENERAL DESCRIPTION AVX/Kyocera produces a broad range of high quality ceramic resonators covering both the kilohertz and megahertz frequency ranges. The high quality and extensive coverage of this product line allows optimum design of almost any oscillating circuit. Ceramic resonators stand between quartz crystal oscillators and LC/RC oscillators in regard to accuracy but are considerably smaller, require no adjustments, have improved start-up times, and are low in cost. Their oscillation is dependent upon mechanical resonance associated with their piezoelectric crystalline structure. These materials (usually barium titanate or leadzirconium titanate, PZT) have large dipole movement which causes the distortion or growth of the crystal by an applied Table I Oscillators and Resonator Frequency Application (Hz) 10k 20k 100k 200k 1M 2M 10M 20M 100M 200M electric field. The resonance frequency depends on the vibration mode as shown in Figure 1. A basic feedback circuit is shown in Figure 2. It consists of an amplifier with a 180 phase shift and attenuator. A negative polar output (volt) is obtained with an amplitude equal to the gain of the amplifier times the input voltage (G x VIN). After the signal goes through the feedback network with an attenuation ratio of , a negative polar wave equal to x (G x VIN) is fed back to the input. If this feedback is greater than the initial input voltage (VIN), oscillation will occur. This satisfies the two conditions necessary for oscillation: 1.G x >1 2. Phase cycle around the loop is an integral multiple of 360. Table II Timing Devices 1G Ceramic Resonators 190 kHz ~ 60 MHz Frequency Tolerance Typical Frequency Stability Relative Size Cost LC 2% 500ppm/C Largest Low RC 1% 100ppm/C Smallest Low Ceramic Resonator 0.5% Quartz Crystal 0.002% Type Symbol SAW Resonators 46 MHz ~ 315 MHz Oscillators 1 MHz ~ 2 GHz Quartz Crystals 12 MHz ~ 22 MHz Figure 1: Vibration Modes vs Frequency Figure 2: Basic Feedback Circuit 50ppm/C Next to Smallest Low 1ppm/C High Next to Largest Figure 3: Oscillator Circuit VDD FREQUENCY Hz Inverter APPLICATION VIBRATION MODE Fosc EXPANDING KBR-B/BK SERIES KBR-F SERIES THICKNESS SHEAR KBR-MS/MSA SERIES KBR-MKS SERIES PBRC SERIES CLOCK OSCILLATORS THICKNESS KBR-M SERIES KBR-MY SERIES SURFACE ACOUSTIC WAVE KAR SERIES VIN 1 VIN 180 PHASE SHIFT G VIN 1 AMP VOUT Rf Ceramic Resonator GAIN: G ATTENUATION FEEDBACK NETWORK G VIN 1 4 Inverter 1K 10K100K 1M 10M 100M 1G 10G 180 PHASE SHIFT C1 C2 EXAMPLE Inverter: MC14069UBP 5 V.D.C. VCC: Rf: 1M ohms C1, C2: 100 pF (455 kHz Resonator) 33 pF (4.00 MHz Resonator) AVX/Kyocera Ceramic Resonators GENERAL DESCRIPTION continued The mechanical vibration of a ceramic resonator can be represented by an equivalent electrical circuit consisting of L, C, and R's (Figure 4). The impedance and phase curves of a ceramic resonator are shown in Figure 5. Between the resonant frequency (r) and the antiresonant frequency (a), the ceramic resonator acts like an inductor with performance identical to a coil and a resistor (Figure 4-B). At other frequencies, it has capacitive characteristics (Figure 4-A). Figure 4: Electrical Equivalent Circuit L0 A The equivalent circuit parameters can be determined from the resonant and anti-resonant frequencies. These equations are shown in Table III with the equivalent circuit parameters of typical AVX/Kyocera resonators shown in Table IV. Ceramic resonators have much lower Qm and higher equivalent capacitances than crystal oscillators. Oscillation circuits of various I.C.'s can be either low (inverter) or high (Schmidt) gain. Figure 5: Impedance and Phase Charts C0 R0 KBR-455BK 100K fa 90 C1 B a Le Phase (deg.) Impedance|Z| () 10K C1 1K 100 Re -90 fr 10 430 450 470 Frequency (kHz) Table III: Equivalent Circuit Equations 0 430 450 470 Frequency (kHz) Table IV: Typical Parameters of the Equivalent Circuit KBR-4.00MSA/MSB KBR-455(BK) R0 8 6 L0 318H 3.2mH C0 5.4pF 43pF C1 42pF 360pF QM 970 1600 5 AVX/Kyocera Ceramic Resonators APPLICATION AND TEST CIRCUITS In some circuits, a feedback resistor (R, Figure 1) is required to allow oscillation to start when the power is initially applied. Its value is generally 1 M in ceramic resonator circuits. Special attention should be paid to the design of oscillator circuits, because they have a significant impact on the performance of the system. To determine proper circuit parameters, careful consideration must be given to each component's characteristics under normal and marginal working conditions. Recommended component values for various IC's and microprocessors are given in theAppendix "Application Circuits for Ceramic Resonators." These values should be checked in the actual operating circuit to confirm their performance over changing conditions of input voltage and temperature. Figure 1: CMOS Clock Generator 480kHz Figure 2: Low Power Schottky VDD KBR-4.00MSA/MSB KBR-6.00MSA/MSB KBR-8.00M 14 IC-4069 R1: 4.7 k ohm R2: 2.2 k ohm C1,C2: 220 pF C1,C2: 120 pF C1,C2: 82 pF SN74LSO4 1 1 MEG R 2 3 4 7 R1 KBR R2 C1 F-OSC C2 KBR-480BK 100 pF 100 pF C1 Figure 3: 4 Bit Microprocessor Clock C2 Figure 4: Test Circuit Spurious Response VDD T.P. 1k 15 k VDD 1K 18 1K 19 33pF PHASE METER RG = 50 CK0 2 RESONATOR 1M COP420R CK1 3 4 11 1 SWEEP OSC 33pF IMPEDANCE KBR-4.00MSA/MSB .01 VDD Figure 5: Simulation Circuit V1 = 20 LOG ---- (DB) V2 R - IN R - OUT CX OSC-1 V1 OSCILLATOR V2 RESONATOR C1 6 OSC-2 C2 O=OV2-OV1 AVX/Kyocera Ceramic Resonators APPLICATION AND TEST CIRCUITS continued The design of an oscillation circuit requires an accurate choice of circuit components to ensure oscillation within the specific voltage range of the IC (Figure 6). Semiconductor manufacturers' data books categorize VH and VL for both input and output requirements. The next stage of a design can be driven from either the IC input or output. Special attention should be paid to VIH and VIL or VOH and VOL depending upon where the next stage comes from the IC. Oscillation frequency and amplitude depend upon the values of the external load capacitors (C1, C2). These Figure 6: Oscillation Level effects are illustrated in Figures 7, 8 and 9. When the feedback ratio and the input oscillation amplitude are decreased too far, the circuit becomes vulnerable to external noise and might oscillate spuriously with the external noise. There are some cases when a high gain IC or one with a wide non-linear range will give abnormal oscillation from sub-vibration of the resonator. This can be prevented by adding a damping resistor to decrease the feedback ratio or by increasing the load capacitance values. The spurious characteristics of typical AVX/Kyocera kHz and MHz resonators are shown in Figures 10 and 11. Figure 7: Load Capacitor Effects MAX C1 - OSC. FREQ. SHIFT CHARAC. (C2: 100pF) MIN MIN 2 1 0 -1 -2 0 VL C2 - OSC. FREQ. SHIFT CHARAC. (C1: 100pF) F (kHz) F (kHz) VOLTAGE (V) VH 100 200 300 400 2 1 0 -1 -2 0 500 100 200 300 400 500 C2 (pF) C1 (pF) TIME MAX Figure 8: C2 Held Constant OSC Voltage Characteristics Figure 9: C1 Held Constant OSC Voltage Characteristics OSCILLATOR VOLTAGE (V) OSCILLATOR VOLTAGE (V) VIH 5 VOH VOL 0 VOH 5 VIH VIL 0 VIL VOL 200 300 C1(pF) 400 500 Figure 10: kHz Spurious Response 100 300 C2(pF) 400 MS SERIES KBR-2.00 MS BK Series (KBR-455BK) -10 -20 ATT (dB) -30 -40 -50 MSA/MSB SERIES KBR-3.58 MSA/MSB 0 0 -10 -10 -20 -20 -30 -40 -30 -40 -60 -50 -50 -70 -60 -60 -80 -70 2500 5000 FREQUENCY (kHz) 500 Figure 11: MHz Spurious Response 0 ATT (dB) 200 ATT (dB) 100 7500 -70 3.0 6.0 9.0 FREQUENCY (MHz) 12.0 3.0 6.0 9.0 FREQUENCY (MHz) 12.0 7 KBR -Y Series Surface Mountable Ceramic Resonators kHz Band SMT Formed Leads Ceramic Resonators FEATURES HOW TO ORDER 1) 2) 3) 4) 5) KBR - 455 Y TR Reflow solderable Washable Surface mountable 1000 pcs. per reel Sold in increments of 2000 pcs. 1 2 3 4 1 2 3 4 Type: (Kyocera Bulk Resonator) Oscillation frequency: 380 to 1050 kHz Resonator type: Y = Surface mountable Packaging: TR = Tape and reel O: 380 to 1050 kHz STRUCTURE High Temperature Resin Case Ceramic Element Outer Terminal SPECIFICATIONS (KBR- Y) Parameters Fig. A Frequency Range Fig. B Fig. C 380 to 430 kHz 440 to 525 kHz 600 to 655 kHz 795 to 815 kHz 960 to 1020 kHz Frequency Tolerance 0.5% 0.5% 0.5% 0.5% 0.5% Resonant Impedance 20 Max 20 Max 50 Max 70 Max 100 Max Anti-resonant Impedance 30k Min 35k Min 50k Min 70k Min 70k Min Temperature Characteristics (-20 to +80C) 0.3% 0.3% 0.3% 0.3% 0.3% C1 100pF 100pF 100pF 100pF 100pF C2 470pF 100pF 100pF 100pF 100pF Standard Oscillation Frequency 400kHz 455kHz 480kHz 500kHz 600kHz 640kHz 800kHz 1000kHz DIMENSIONS Date Code unit: mm (inch) 8 0.7 (.028) Date Code Frequency 0.3 (.012) unit: mm (inch) 0.6 (.024) Model Name 5.0 (.197) 2.5 (.098) 2.3 (.091) 0.6 (.024) 0.6 (.024) 5.0 (.197) 3.5 (.138) 0.3 (.012) 0.7 (.028) 0.7 (.028) 0.3 (.012) 9.0 (.354) (.197) Frequency 8.0 (.315) 0.7 (.028) 0.6 (.024) 9.0 (.354) 5.0 Fig. C 6.3 (.248) 3.5 (.138) Frequency 8.5 (.335) Fig. B 0.7 (.028) Fig. A Date Code unit: mm (inch) KBR -Y Series Surface Mountable Ceramic Resonators kHz Band SMT Formed Leads Ceramic Resonators TEST CIRCUIT O: 380 to 1050 kHz SUGGESTED LAND PATTERNS 380 to 430 kHz 440 to 525 kHz 600 to 655 kHz VDD 795 to 815 kHz 960 to 1050 kHz +5VDC 2.4 (.094) fosc 1M C1 C2 1.4 (.055) IC: 4069 (Hex Inverter) (MOTOROLA ) 1.4 3.9 (.055) (.154) unit: mm (inch) PACKAGING (KBR- Y TYPE) TAPE DIMENSIONS - 380 TO 430 / 440 TO 525 / 600 TO 655 kHz A 0.2 6.7 B 0.2 8.5 C D E 0.2 0.2 0.3 8.7 11.25 16.0 F 0.2 7.5 G 0.1 1.75 H 0.1 12.0 J 0.1 4.0 K 0.1 2.0 L M N 0.1 0.2 1.5 10max 4.8 P 0.2 4.1 Q R S 0.2 0.2 4.3 .3max 1.7 T 0.1 0.4 U 0.2 1.9 L M N 0.1 0.2 1.5 10max 3.6 P 0.2 2.9 Q R S 0.2 0.2 3.1 .3max 1.7 T 0.1 0.4 U 0.2 1.9 TAPE DIMENSIONS - 795 TO 815 / 960 TO 1050 kHz A 0.2 3.9 B 0.2 5.5 C 0.2 5.7 D 0.2 8.55 E 0.3 16.0 F 0.2 7.5 G 0.1 1.75 H 0.1 8.0 J 0.1 4.0 K 0.1 2.0 Q H P J G T K U F E D R M Note: Quantity per reel equals 1000 pieces. S A C N B unit: mm REEL DIMENSIONS - 380 TO 430 / 440 TO 525 / 600 TO 655 kHz A 1.5 330 B 1.0 80 C 0.5 13 D 0.5 21 E 0.5 2.0 R 1.0R W 2.5 17.5 T B 1.0 80 C 0.5 13 D 0.5 21 E 0.5 2.0 R 1.0R W 2.5 17.5 B 3.0max R REEL DIMENSIONS - 795 TO 815 / 960 TO 1050 kHz A 1.5 250 E C (Dia.) D (Dia.) T 2.5max A W T unit: mm 9 KBR -B, -BK, -F Series Ceramic Resonators kHz Band Ceramic Resonators O: 190 to 1050 kHz FEATURES HOW TO ORDER 1) Optimum selection of oscillation parameters possible according to application 2) Highly reliable design with excellent environmental resistance 3) Standard frequency range of 190 kHz to 1050 kHz 4) Formed lead type also standardized for use in low profile devices 5) Packaged in bags of 500 pcs. 6) Sold in increments of 2000 pcs. KBR - 455 BK TS SPECIFICATIONS (KBRConfiguration 1 2 3 4 1 Type: (Kyocera Bulk Resonator) 2 Oscillation frequency: 190 to 1050 kHz 3 Resonator types: B /BK = 190 to 680 kHz F = 795 to 1050 kHz 4 Lead style: = Standard TS = Single-in-line TL = Formed lead B/KBR- BK/KBR- F) Fig. A Fig. B Fig. C Fig. D B B BK B BK BK BK B B F F Frequency Range 190 to 249 kHz 250 to 379 kHz 380 to 430 kHz 431 to 439 kHz 440 to 525 kHz 540 to 599 kHz 600 to 655 kHz 526 to 539 kHz 656 to 680 kHz 795 to 815 kHz 960 to 1050 kHz Frequency Tolerance 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% Resonant Impedance 20 Max 20 Max 20 Max 20 Max 20 Max 20 Max 50 Max 20 Max 50 Max 70 Max 100 Max Antiresonant Impedance 25k Min 30k Min 30k Min 30k Min 35k Min 35k Min 50k Min 35k Min 50k Min 70k Min 70k Min C1 330pF 220pF 100pF 100pF 100pF 100pF 100pF 100pF 100pF 100pF 100pF C2 470pF 470pF 470pF 470pF 100pF 100pF 100pF 100pF 100pF 100pF 100pF Temperature Characteristics (-20 to +80C) 0.3% 0.3% 0.3% 0.3% 0.3% 0.3% 0.3% 0.3% 0.3% 0.3% 0.3% (-40 to +85C) +0.3% -0.5% +0.3% -0.5% +0.3% -0.5% +0.3% -0.5% +0.3% -0.5% +0.3% -0.5% +0.3% -0.5% +0.3% -0.5% +0.3% -0.5% +0.3% -0.5% +0.3% -0.5% Standard Oscillation Frequency 200kHz 300kHz 400kHz -- 600, 640kHz -- 680kHz 800kHz 1000kHz Blue Blue Blue Blue Blue Blue Blue Green Green Type Case Color Fig. E Fig. F 455, 480, 500kHz 540, 560kHz Blue Blue TEST CIRCUIT VDD +5VDC 1M C1 C2 C1, C2 : See specifications IC : 4069 (Hex inverter) (MOTOROLA) 10 Fig. G KBR -B, -BK, -F Series Ceramic Resonators kHz Band Ceramic Resonators O: 190 to 1050 kHz DIMENSIONS Fig. B 250 to 379 kHz (B-Type) 3.5 (.138) K Model Name 1.0 (.039) 8.0 (.315) 1.6 (.063) (.031) 7.5 (.338) 10.0 (.394) 8.5 (.335) 0.6 Fig. E 440 to 525/540 to 655 kHz 0.6 0.15 (.024) (.006) 5.0 5.0 5.0 5.0 (.197) (.197) (.197) (.197) [TS] unit: mm (inch) unit: mm (inch) 0.8 (.031) 0.15 (.006) (.024) 0.20 (.008) 0.8 1.6 (.063) 0.8 (.031) 1.5 (.059) 0.20 (.008) 0.8 (.031) Date Code Model Name 1.5 (.059) 8.0 (.315) 13.5 (.531) 9.0 (.354) 16.5 (.650) 1.0 (.039) Date Code K Date Code Model Name 3.5 (.138) Date Code Model Name 8.5 (.335) 4.5 (.177) K Fig. D 431 to 439 kHz (B-Type) 8.5 (.335) 11.2 (.441) 3.8 (.150) 3.8 (.150) 14.2 (.559) Fig. C 380 to 430 kHz (BK-Type) 3.5 (.138) Fig. A 190 to 249 kHz (B-Type) [TS] unit: mm (inch) unit: mm (inch) Fig. F Fig. G 526 to 539/656 to 680 kHz (B-Type) 795 to 815/960 to 1050 kHz (F-Type) (Types: BK, AK, HK, AHK) Date Code 9.0 (.354) Model Name (.024) 0.8 (.031) 3.5 (.138) 0.6 0.15 (.006) Date Code 0.15 (.006) 0.2 0.6 (.024) (.008) 1.5 (.059) 1.5 (.059) 0.6 (.024) 0.8 (.031) 4.5 (.177) 3.5 (.138) 0.8 (.031) 5.0 (.197) Date Code 2.3 (.091) 8.0 (.315) 8.0 (.315) Model Name 3.5 (.138) 3.5 (.138) Model Name 6.3 (.248) 8.0 (.315) 5.0 (.197) 4.2 (.165) 5.0 (.197) 2.5 (.098) unit: mm (inch) unit: mm (inch) unit: mm (inch) LEAD FORMATIONS Lead Type Lead Shape Frequency Range B-Type BK-Type F-Type -- 380 to 430 kHz 440 to 525 kHz 540 to 655 kHz 795 to 815 kHz 960 to 1050 kHz Single in-line is standard for F series TS TL A B 250 to 379 kHz 431 to 439 kHz 526 to 539 kHz 656 to 680 kHz A* 3.0 4.5 4.5 4.5 B* 3.0 6.0 6.0 6.0 380 to 430 kHz 440 to 525 kHz 540 to 655 kHz A* 3.5 3.5 3.5 B* 5.0 5.0 5.0 795 to 815 kHz 960 to 1050 kHz A* 1.9 1.9 B* 1.9 1.9 *Dimensions in mm. 11 KBR Special Series Ceramic Resonators kHz Band Ceramic Resonators SPECIAL RESONATORS Application Model No. KBR-503.5AKTS1 KBR-503.5AKTS12 KBR-503.5AKTS16 KBR-503.5AKTS2 KBR-503.5AKTS3 KBR-503.5AKTS4 KBR-503.5AKTS5 KBR-500AKTS1 KBR-500AHKTS2 KBR-503.5AHKTS2 Horizontal synchronous oscillator control circuit of TV set Horizontal synchronous detection circuit of VCR KBR-457HKTS Oscillation Frequency 504.52.0kHz 504.52.0kHz 501.72.0kHz 503.52.0kHz 503.52.0kHz 525.62.0kHz *1(fr) 516.42.0kHz*1(fr) 500.02.0kHz 500.01.5kHz 503.51.5kHz 18.950kHz38Hz Variable Frequency Range 15kHz min. Resonant Impedance Anti-resonant Impedance Temperature Characteristics Dimensions (page 11) IC LA7620 (SANYO) LA7650(SANYO) LA7680(SANYO) PC1400C(NEC) PC1401CA (NEC) 12.8kHz min. 30 max. 15kHz min 5210kHz *2( f) 5110kHz *2( f) 16kHz min. -- 0.5% max. (-20C~+80C) Fig. E M51307SP (MITSUBISHI) -- 20 max. 70k min. 17.0kHz min. *2( f) 20 max. 70k min. KBR-457HKTS1 FM stereo MPX KBR-912F102 KBR-912F103 38kHz min. 912kHz0.3% 100 max. 30k min. KBR-912F104 *2( f) KBR-912F108 KBR-450AHKTS5 450.00.5kHz *1(fr) KBR-450AHKTS8 450.00.8kHz *1(fr) Detection of search stop KBR-450AHKTS1 450.01.0kHz *1(fr) 9.02.0kHz -- 30 max. signal of electronic tuner KBR-459AHKTS5 459.00.5kHz *1(fr) *2( f) KBR-459AHKTS8 459.00.8kHz *1(fr) KBR-459AHKTS1 459.01.0kHz *1(fr) RF modulator for KBR-500AHKTS15 500.01.5kHz 20 max. 70k min. -- PAL system KBR-500AHKTS3 500.01.5kHz KBR-491.5BKOL2 491.5kHz0.3% 20 max. 35 min. FDD motor KBR-983FOL1 983kHZ0.3% 100 max. 70k min. -- control circuit KBR-610.2BKOL4 610.2kHz0.3% 50 max. 50k min. KBR-460.8BK4 460.8kHz0.3% 20 max. 35k min. KBR-480BKTS3 480kHz0.3% 20 max. 35k min. Telephone unit KBR-480BKTS-TM1 480kHz0.3% -- KBR-960F3 960kHz0.3% 100 max. 70k min. *1: fr=resonant frequency, *2: f=fa-fr (fa=anti-resonant frequency), *3: When used in conjunction with special stereo 0.6% max. (-20C~+80C) Fig. E 0.2% max. (-15C~+75C) Fig. E -- Fig. G PC1403CA (NEC) LA2710LA7212 LA7215 (SANYO) LA3400N,LA3401 LA3410,LA3430 (SANYO) LA3400 (SANYO) TA2080F (TOSHIBA) TA2046FN (TOSHIBA) LA1867M(SANYO) LA1780M(SANYO) 0.5% max. (-20C ~ +60C) 0.8% max. (-20C ~ +60C) Fig. E 0.5% max. (-20C ~ +60C) -- 0.8% max. (-20C ~ +60C) 0.3% max. (-20C ~ +80C) Fig. E 0.3% max. (-20C ~ +80C) -- BA7004 (Rohm) LA7053 (SANYO) HA13440MP(HITACHI) HA13468MP(HITACHI) M51785(MITSUBISHI) BA6472 (Rohm) TC31018P(TOSHIBA) TMP47C26N(TOSHIBA) TMP47C456AF(TOSHIBA) Fig. E 0.3% max. (-20C~ +80C) Fig. G MPX IC's. APPLICATION CIRCUITS VDD (4.5V to 6.5V) Extal Xtal 5 6 VDD (4V to 6V) 20 VDD VSS 14 SANYO LM641BF 10 11 NEC PD7564CS 8 20 9 1M 220pF 220pF 220pF 220pF MICROCOMPUTER MICROCOMPUTER 24 21 MITSUBISHI 23 53 TOSHIBA T6668S 2 9 10 AUDIO REC/PLAY 1 6 CONTROL VOLTAGE TERMINAL 330 OSCILLATION FREQUENCY 4.7F (1/32) 22 20 17 LA7620 (SANYO) 16 18 19 28 OSC IN OSC OUT 7 8 330 100pF 100pF 0.01 F 7 6.8k 150pF 6 150pF KBR-480BK3 TONE DIALER 1.8k 8 VDD (+12V) + - 10F 7 28 15 14 1 HITACHI HA13432MP 21 20 19 18 17 16 26 2 3 680 KBR-503.5AK1 PULSE DIALER 3 15 47pF 100 + F - KBR-480BK 12 5 1 0.033F +B (+12V) VDD (5V) M50142P 12 13 REMOTE CONTROL TRANSMITTER MOSTEK 3 VDD (1.5V to 5V) 1 2 9 17 TOSHIBA T031018P 100pF MK50981(N)/50982(N) 14 MICROCOMPUTER KBR-455BKTLR KBR-480BKTLR KBR-640BK VDD COL1 VSS 3 100pF 100pF ROW 1 150pF 300kHz to 500kHz Type B/BK Resonator VDD (3V) VDD (4V to 6V) 100pF 270pF KBR-500BK KBR-640BK 53 VDD (-9V) 220 KBR-400BK 42 T1 18 2100/2300/ VSS 2170/2370 OSC1 OSC2 VDD 38 36 37 3.3K 56K VDD (+12V) 680 680 47pF VDD (+12V) KBR-614.4BK4 TV HORIZ SYNC FDD MOTOR PBRC -A Series Chip Resonators MHz Band SMT Resonators O: 2.00 to 8.00 MHz FEATURES HOW TO ORDER 1) High reliability chip resonator in a ceramic case which can be reflow soldered and washed 2) Ultra-miniature size is suitable for compact equipment and high mounting density 3) Rectangular shape allows easy "pick and place" operation 4) 2000 pcs. per reel 5) Sold in increments of 2000 pcs. PBRC - 4.00 A R 1 2 3 4 1 2 3 4 Type: (Piezo Bulk Resonator Chip) Oscillation frequency (MHz) Resonator type: A = Without capacitor Packaging: R = Tape and reel STRUCTURE Ceramic Case Ceramic Element Conductive Paste Terminations: Nickel Barrier with Gold Flash Electrode Alumina Ceramic Substrate SPECIFICATIONS (PBRC- A) Frequency Range 2.00 to 8.00 MHz Frequency Tolerance 0.5% Resonant Impedance 200 Max at 2.00~2.90MHz 100 Max at 3.00~3.57MHz 30 Max at 3.58~8.00MHz Temperature Characteristics (-20 to +80C) 0.3% RECOMMENDED LAND PATTERN FOR PBRC- A STANDARD TEST CIRCUIT (PBRC- 5.0mm (.197) A) VDD = 5.0V 14 MC14069UB (MOTOROLA) 1 2 3 4 7 4.0mm (.157) R 1.0M 1.7mm 1.7mm (.067) (.067) OUT GND Resonator C1 33pF C2 33pF DIMENSIONS *t 7. 2 (.283) 2-1.2 (reference) (.079-.047) 3 3.0 (.118) 6-R0.2 (.236-R0.008) 1 0.6 (.024) 3.4 (.134) Date Code 2.6 (.102) Oscillation Frequency 7.4 (.291) 5.0 (.197) 1, 3: Input, Output (no polarity) *t=PBRC A Series: 2.0 max. Tolerances = 0.3mm Unit: mm (inch) 13 PBRC -B, -D Series Chip Resonators Built-in Capacitor MHz Band SMT Resonators FEATURES HOW TO ORDER 1) Built-in load capacitor 2) High reliability chip resonator in a ceramic case which can be reflow soldered and washed 3) Ultra-miniature size is suitable for compact equipment and high mounting density 4) Rectangular shape allows easy "pick and place" operation 5) 2000 pcs. per reel 6) Sold in increments of 2000 pcs. PBRC - 4.00 B R O: 2.00 to 36.00 MHz 1 2 3 4 5 Type: (Piezo Bulk Resonator Chip) Oscillation frequency (MHz) Resonator type: B = With capacitor (2.00~20.00MHz) D = With capacitor (20.01~36.00MHz) Packaging: R = Tape and reel STRUCTURE Ceramic Case Frequency tolerance: = 0.5% (2.00~8.00MHz) Ceramic Element 07 = 0.7% (8.01~20.00MHz) Conductive Paste = 0.5% (20.01~36.00MHz) 1 2 3 4 5 Terminations: Nickel Barrier with Gold Flash SPECIFICATIONS (PBRCSeries Type Frequency Range Load Capacitor Frequency Tolerance Resonant Impedance B/PBRC- B 2.5 (.098) 0.1% 0.3% STANDARD TEST CIRCUIT 8.01 ~ 36.00 MHz (PBRC- D) VDD = 5.0V (PBRC- B) VDD = 5.0V 2.5 (.098) 14 14 MC14069UB (MOTOROLA) 1 2 3 4 7 R 1.0M 1.5 (.059) D 20.01~36 10 pF (10) 0.5% 150 Max. 150 Max. 150 Max. STANDARD TEST CIRCUIT 2.00 ~ 8.00 MHz 4.0 (.157) 1.7 (.067) 8.01 to 20.00 MHz 10 pF (typ.) 0.7% 150 Max. 150 Max. 150 Max. 0.3% RECOMMENDED LAND PATTERN FOR PBRC- B/D 1.7 (.067) Alumina Ceramic Substrate D) 2.00 to 8.00 MHz 33 pF (typ.) 0.5% 2.00-2.90MHz 200 max. 3.00-3.57MHz 100 max. 3.58-8.00MHz 30 max. Temperature Characteristics (-20 to +80C) Electrode MC74HC04 (MOTOROLA) 1 2 3 4 7 GND OUT R 1.0M C2 33pF GND Resonator Resonator C1 33pF OUT C1 10pF C2 10pF Unit: mm (inch) PAD CONNECTION DIMENSIONS 0.6 (.024) *t 7. 2 (.283) 1 3 3 3.0 (.118) 2.5 (.098) 7.4 (.291) 14 3-1.2 (reference) (.118-.047) 3.4 (.134) Date Code 2.6 (.102) Oscillation Frequency 6-R0.2 (.236-R0.008) 1 2 2.5 (.098) 1, 3: Input, Output (no polarity) 2: GND *t=PBRC B Series: 2.0 max. PBRC D Series: 1.6 max. Tolerances = 0.3mm Unit: mm (inch) 1. Input 2. Ground 3. Output 2 Note: Pads 1 and 3 are interchangeable. Tape & Reel Packaging Surface Mountable Chip Resonators PBRC -A, -B, -D Types 2000 pieces per reel with 10 positions open at beginning and end of reel. Leader will be 200mm maximum. TAPE DIMENSIONS A 0.2 3.8 B 0.2 7.8 D 0.3 16.0 E 0.1 7.5 F 0.1 1.75 G 0.1 8.0 H 0.1 4.0 K 0.1 1.5 J 0.1 2.0 M R 10max 0.3max W 0.2 2.1 T 0.1 0.3 L 0.05 1.55 H J T A K F R E D B M W G M R L R Units:mm REEL DIMENSIONS A 255 1.0 B 80 0.5 C 13 0.5 D 25 0.8 E 2 0.5 R 1.0R W 17.5 1.5 T 2 0.5 E C (Dia.) D (Dia.) B R W A T PACKING METHOD Blank Pocket Loaded Pocket Units:mm TEST CONDITION OF PEELING STRENGTH Blank Pocket Leader Top Tape 10 10 Pitches Minimum MARKING Marking of Reel a). Type Name b). Lot No. c). Quantity d). Vendor Name Marking of Exterior Package a). Type Name b). Lot No. c). Quantity of Reel d). Shipping Date e). Vendor Name Carrier Tape 10 Pitches 200mm Minimum Maximum Pulling Direction REFLOW PROFILE Suggested Reflow Profile KBR-Y Series PBRC Series 230C5C max. 200C 150C 100C 1 hour before meeting all electrical specs. 60 sec. 60 sec. 20 sec. max. Gradual Cooling 15 Capacitor Built-In Type Chip MHz Band Ceramic Resonators - SSR-B Series FEATURES HOW TO ORDER 1) World's smallest (2.1x3.2x1.5 mm) 2) High density mounting possible 3) Wide frequency range in same case size 4) 2000 pieces per reel 5) Sold in increments of 2000 pieces SSR 33.86 B R 1 2 3 4 Type: (Super Small Resonator) Oscillating frequency Resonator type: B = With capacitor Packaging: R = Tape and reel 1 2 3 4 SPECIFICATIONS Frequency Range Frequency Tolerance Resonant Impedance Temperature Stability (-20~80C) 16~60MHz 0.5% 100 max. 0.3% IC Popular Frequencies MC74HCU04 (MOTOROLA) 16, 25, 27, 29, 33.86, 40 DIMENSIONS 0.7 (.028) 1.50.20 (.059.008) 1.4 (.055) KC 0.70.10 (.028.004) 1.8 (.071) 33.86 2.10.20 (.083.008) 0.6 (.024) o0.35 1.2 (.047) 1.2 (.047) 3.2+0.3/-0.2 (.126+.012/-.008) TEST CIRCUIT Units: mm (inches) RECOMMENDED LAND PATTERN 0.7 (.028) VDD 0.7 (.028) 0.7 (.028) 1.2 (.047) fosc R 3 3.0 (.118) 1 1.2 (.047) VDD : 5V R : 1M IC : MC74HCU04 1.2 (.047) 2 1.2 (.047) PACKAGING: TAPE and REEL H oK T A Symbol A B D E F G H Dimension 2.4 3.6 8.0 3.5 1.75 4.0 4.0 Symbol J K L M R W T Dimension 2.0 1.5 1.1 5 max. 0.3 max. 1.8 8.0 M B R D E R F J G oL M R W R Unit: mm (inches) 16 KBR -M, -MS, -MSA, -MSB Series Ceramic Resonators MHz Band Ceramic Resonators O: 2.00 to 13.00 MHz FEATURES HOW TO ORDER 1) Ultracompact, lightweight design 2) Resistant to damage from impact and vibration 3) Excellent temperature stability (0.3%) 4) Low cost 5) Bulk packaged 500 pieces per bag or 2000 pieces per reel 6) Sold in increments of 200 pieces KBR - 4.00 MSA TR 1 2 3 4 1 2 3 4 Type: (Kyocera Bulk Resonator) Oscillation frequency (MHz) Resonator type: MS = 2.00 to 3.57 MHz MSA = 3.58 to 8.00 MHz (Water resistant) MSB = 3.58 to 6.00 MHz ("No-Clean" Process only) M = 6.01 to 13.00 MHz Packaging: TR = Tape and reel = Bulk SPECIFICATIONS (KBR- MS/KBR- MSA/KBR- MSB/KBR- M Series) Series Dimension Oscillation Frequency Frequency Tolerance Resonant Impedance Temperature Characteristic (-20 to +80C) MS Fig. A 2.00 to 3.57 MHz 0.5% 100 Max MSA, -MSB Fig. B 3.58 to 8.00 MHz 0.5% 30 Max M Fig. C 6.01 to 6.99 MHz 0.5% 40 Max M Fig. D 7.00 to 13.00 MHz 0.5% 40 Max 0.3% 0.3% 0.5% 0.5% Fig. A Fig. B Fig. C Fig. D DIMENSIONS Date of production KBR MS 5.0 (.197) 7.5 Max. (..278) (.394) 5.0 10.0 Max. 5.0 (.197) (.197) Unit: mm (inch) Unit: mm (inch) KBR-3.58MSA - 200 series for Telephone D.T.M.F. Applications KBR-3.58MSA-201 KBR-3.58MSA-202 KBR-3.58MSA-203 KBR-3.58MSA-204 KBR-3.58MSA-205 KBR-3.58MSA-206 KBR-3.58MSA-207 Frequency Frequency Tolerance 3.5795MHz +0 -0.25% +0.15 -0.10% +0.30 -0.05% +0.45 +0.20% +0.60 +0.35% -0.30 -0.55% -0.15 -0.40% 0.2 (.008) 0.2 (.008) Unit: mm (inch) P/N 5.0 Max. (.197) 5.0 Max. (.197) 0.2 (.008) 0.2 (.008) 5.0 (.197) 5.0 (.197) 5.0 Max. (.197) 1.2 (.047) 0.6 (.024) 7 Max. 5.0 Max. (.197) Date of production KBR M 5.0 5.0 (.197) Frequency 1.2 (.047) 0.6 (.024) (.394) 1.2 (.047) 0.6 (.024) KBR M Date of production (.197) (.276) Frequency 10.0 Max. 10.0 Max. (.394) 5.0 Frequency (.197) Date of production 12.0 Max. (.472) Frequency Resonant Resistance Temperature Stability (-20 to +80C) Unit: mm (inch) TEST CIRCUIT VDD Dimensions f osc R RESONATOR 30 Max 0.3% Fig. B C1 C2 VDD : 5V (2.0~8MHz) 12V (8.1~13MHz) only M series R : 1M C1,C2: 33pF IC : 4069 (HEX INVERTER (MOTOROLA) 17 KBR -MY Series Ceramic Resonators High Frequency MHz Band Ceramic Resonators FEATURES HOW TO ORDER 1) High frequency resonator to match high-speed needs 2) Faster start-up time as compared to quartz crystals 3) High durability 4) Bulk packaged 500 pieces per bag or 2000 pieces per reel 5) Sold in increments of 2000 pieces KBR - 16.00 MSA TR O: 13.01 to 36.00 MHz 1 2 3 4 1 Type: (Kyocera Bulk Resonator) 2 Oscillation frequency (MHz) 3 Resonator type: MY = CMOS IC MSA= Standard 4 Packaging: = Bulk TR = Tape and reel SPECIFICATIONS (KBR- MY/KBR- MSA) Series Type KBR -MY KBR -MSA 13.01 to15.99 MHz 16.00 to 36.00 Frequency Tolerance 0.5% 0.5% Resonant Impedance 30 max. 30 max. 0.3% max. 0.3% max. Frequency Range Temperature Characteristics (-20 to +80C) DIMENSIONS 10.0 Max. (.394) KBR-MSA Type 5.0 Max. (.197) 1.2 (.047) 0.6 (.024) 5.0 5.0 (.197) 5.0 0.2 (.008) (.197) Date of production 5.0 9 Max. 5.0 10.0 Max. Date of production 10.0 Max. (.394) (.197) (..394) Frequency R Frequency (.197) (.354) KBR-MY Type 0.2 (.008) (.197) Unit: mm (inch) Unit: mm (inch) STANDARD TEST CIRCUIT KBR-MY Type KBR-MSA Type VDD = 5.0V MC74HC04 (MOTOROLA) 1 2 3 4 VDD 14 f osc 7 R OUT RESONATOR GND R 1.0M Resonator C1 33pF 18 C2 33pF C1 C2 IC : MC74HCU04 VDD: 5V Rf: 1M C1,C2: 10pF KBR -MKC, -MKD, -MKS Series Ceramic Resonators Built-in Capacitor MHz Band Ceramic Resonators O: 3.45 to 8.00 MHz 16.00 to 36.00 MHz FEATURES HOW TO ORDER 1) Built-in load capacitance 2) Simplified circuit 3) Reduced parts cost 4) Reduced mounting cost 5) High density mounting 5) Bulk packaged 500 pieces per bag or 2000 pieces per reel 7) Sold in increments of 2000 pieces KBR - 4.00 MKC TR 1 2 3 4 SPECIFICATIONS (KBR- 1 2 3 4 Type: (Kyocera Bulk Resonator) Oscillation frequency (MHz) Resonator type: MKC = "No-Clean" Process only MKD = Water resistant MKS = Standard Packaging: = Bulk TR = Tape and reel MKC/KBR- Series Type MKD/KBR- MKS) KBR -MKC, -MKD, -MKS KBR -MKD 3.45 to 8.00 MHz 16.00 to 36.00 Frequency Tolerance 0.5% 0.5% Resonant Impedance 30 30 0.5% 0.3% Frequency Range Temperature Characteristics (-20 to +80C) DIMENSIONS 0.5 (.020) 2 4.00 1.2 (.047) 0.3 (.012) 0.5 (.020) 1 3 2 10.0 max (.394) 16.00 0.3 (.012) 3 0.5 (.020) 1 2.5 2.5 (.098) (.098) 2.5 2.5 (.098) (.098) MKD TYPE (16.0 to 36.0MHz) 5.0 max (.197) 5.01.0 8.0 max (.197) (.315) 4.00 1 10.0 max (.394) 5.0 max (.197) 5.0 6.0 max (.197) (.236) 10.0 max (.394) MKD TYPE (3.45 to 8.00MHz) 2 5.0 max (.197) 5.0 9.5 max (.197) (.236) MKC, MKS TYPES 0.3 (.012) 3 2.5 2.5 (.098) (.098) 1, 3 Input, Output 2 Ground (No polarity) Unit: mm (inch) Tolerance 0.2mm unless otherwise specified TEST CIRCUIT PIN CONNECTION (No Polarity) VDD 5V 1 fosc 3 R 1 3 R : 1M IC : MC14069...3.45 to 8.00 MC74HCU04...16.00 to 36.00 C1 2 C2 C1, C2: 33pF (Typ.)...3.45 t0 8.00 10pF (Typ.)...16.00 to 25.00 5pF (Typ.)...25.01 to 36.00 1. Input 2. Ground 3. Output 2 Note: Pins 1 and 3 are interchangeable 19 Tape & Reel Packaging MHz Ceramic Resonators TAPE AND REEL PACKAGING HOW TO ORDER * 2000 pieces per reel * Min. of 3 open positions at the beginning and end of tape KBR 1 2 3 4 AMMO PACK * 2000 pieces per package * A minimum of 38.1mm or three positions shall be open at beginning and end of tape * Each fold shall be 317.35mm in length or the equivalent of twenty-five positions TR 1 2 3 4 Type: (Kyocera Bulk Resonator) Oscillation frequency (MHz) Resonator type = M/MS/MSA/MSB/MY/MKC/MKD Packaging: TR = Tape and reel TF = Ammo pack TAPE DIMENSIONS -M, -MS, -MSA, -MSB, -MY TYPES -MKC, -MKD, -MKS TYPES 5.0Max 12.70.3 9.00.5 0.7 0.5 20.0 +0.8 0.2 3.85 3.0Min. 9.00.5 0.3 ~ 0.5 18.0+1.0 -0.5 +0.5 +0 6.0Min 0 0.5 20.0 0.50.1 1.2 2.5 2.5 o4.0 12.70.3 * Varies per actual part dimensions, see pages 17 and 18. 0.50.1 0.3 ~ 0.5 0.7 18.0+1.0 -0.5 3.0Min. +0.8 0.2 3.85 5.0 02.0 10.0 +0.5 +0 1.2 5.0Max 6.351.3 12.70.3 02.0 6.0Min 0 6.351.3 12.70.3 o4.0 * Varies per actual part dimensions, see page 19. unit: mm REEL DIMENSIONS unit: mm AMMO PACK DIMENSIONS O30 270mm 52mm O360 44mm 55mm m 340m 20 Surface Acoustic Wave Resonators GENERAL DESCRIPTION The fundamental wave oscillation of AVX/Kyocera Surface Acoustic Wave (SAW) Resonators eliminates spurious response, which leads to a reduction in the number of components used for spurious frequency suppression. This feature, in addition to the good shock resistance characteristics of the SAW resonator, helps to simplify the assembly process and promotes higher stability. Kyocera Surface Acoustic Wave (SAW) resonators are ideal for use in RF modulators for videotape recorders, video discs and cable television. These unique SAW resonators contain two channels in one package. Custom design features can be manufactured for specific applications. TEST CIRCUIT R1 = 50 S.G. R2 = 50 VM R1 & R2 are input/output impedance of measuring equipment. ENVIRONMENTAL CHARACTERISTICS TEST High Temperature Storage Test Low Temperature Storage Test Humidity Loading Test Solderability Test Thermal Shock Test Shock Test CONDITION +852C -402C 402C, 90%RH, 6VDC 26010C, 101 sec. -20C 30 min., 70C 30 min. 5 cycles 90G: 6 msec XYZ direction totally 18 times 21 Surface Mount SAW Resonators PAR Series FEATURES HOW TO ORDER 1) 2) 3) 4) 5) 6) PAR S 433.92 K 04 R Frequency range: 300 to 450 MHz 1 port type SMD resonator Small size (5.5X3.8mm) Low profile (1.5mm max) SMT ceramic package Excellent temperature characteristics: +100ppm ~ -250ppm (-40 ~ 85C) 7) 2000 pieces per reel 8) Sold in increments of 2000 pieces 1 2 3 4 5 6 SMT SAW Resonator Type: C = Glass seal, S = Seam weld Frequency Marking code (please see table) Freq. Tolerance or custom spec. 00 : 250KHz 01 :200KHz 02 : 150KHz 03 :100KHz 04 : 75KHz 10 :Tolerance 11 : Custom spec. Package: R=Tape & reel 1 2 3 4 5 6 ELECTRICAL CHARACTERISTICS Resonant Frequency (MHz) Resonant Loss (dB) Parallel Capacitance (pF) PARS 304.45LXXR 304.45 2.5 max. 4.0 max. PARS 310.00KXXR 310.00 2.5 max. 4.0 max. 2.5 max. 3.2 max. 314.50 2.5 max. 3.2 max. PARS 315.00KXXR 315.00 2.5 max. 3.2 max. PARS 320.65KXXR 320.65 2.5 max. 3.2 max. PARS 423.22KXXR 423.22 2.5 max. 3.2 max. PARS 432.92KXXR 432.92 2.5 max. 3.2 max. PARS 433.42LXXR 433.42 2.5 max. 3.2 max. PARS 433.92KXXR 433.92 2.5 max. 3.2 max. DIMENSIONS 1.25 1.00 Resonant Frequency (MHz) 304.45 2 1.90.2 1 3.80.2 4-R 0.15 4 3 2.750.2 4-R 0.15 1.00 1.25 Marking Code 304 L 310.00 310 K Pin Function 314.00 314 K Hot NC Hot NC 314.50 314 L 315.00 315 K 320.65 320 K 423.22 423 K 432.92 432 K 433.42 433 L 5.50.2 BLOCK DIAGRAM (Example application) Transmitter (Tx) Receiver (Rx) Heterodyne Receiver SAW Filter OSC Circuit MPU I.D. Signal 22 1.5 MARKING CODE 4-1.00.2 4-0.60.2 4-1.00.2 1.5 314.00 PARS 314.50LXXR 1.25 0.15 PARS 314.00KXXR 0.15 1.25 Part Number RECOMMENDED LAND PATTERN SAW Resonator 240MHz ~450MHz 0.5MHz Filter SAW Resonator 240MHz ~450MHz DET Signal Out Monthly Code 315K C (4 digits Frequency Marking) KAR Series SAW Resonators MHz Band SAW Resonators O: 46 to 315 MHz FEATURES HOW TO ORDER 1) 2 channels encased in one package 2) Utilization of fundamental wave oscillation suppresses spurious response 3) No adjustment of peripheral circuits required 4) Good vibration and shock resistance 5) Superior temperature stability 6) Reduces the number of peripheral components KAR-91-CS 1 2 3 1 Type: (Kyocera Acoustic Resonator) 2 Oscillation frequency (MHz) 3 Resonator type: CS, CT = Small package - Fig. B CD, CB = Standard package - Fig. A CK, CL = Round shape package - Fig. C. CF, CG = Small square package - Fig. D. STRUCTURE Die Bond Bonding Wire Can Al Electrode Substrate Stem Hermetic Seal Leads SPECIFICATIONS (KAR- - ) Part No. Channel* KAR-55CT 2 U-3 KAR-83CB 5 U6 KAR-55CS 3 W4 KAR-86CB 3 A4 KAR-85CB 4 O5 KAR-61CT 3 U4 KAR-77CS 3 O4 KAR-91CS J- KAR-211CS U-13 1 2 Resonant Frequency (MHz)** 55.240.08 61.240.08 77.240.08 83.240.08 55.240.08 62.240.08 86.240.08 95.240.08 85.240.08 93.240.08 61.240.08 67.240.08 77.240.08 85.240.08 91.240.08 97.240.08 211.240.15 Resonant Loss (dB) 6.0 MAX 4.0 MAX 5.0 MAX 3.0 MAX 3.0 MAX 5.0 max 4.5 MAX 3.0 MAX 2.7 MAX Parallel Capacitance (pF) 3.61 3.71 4.51 4.21 4.81 4.81 4.21 4.01 4.21 4.01 4.41 2.81 3.11 2.81 4.01 4.01 Temperature Stability -10C to +60C (ppm/C) Dimension 8 7 8 Figure A 5 5 8 8 Figure B 5 3.01 8 Parallel Capacitance (pF) Temperature Characteristics (ppm/C) Dimension 8 Max. Fig. B *J: Japan U: USA W: Germany A: Australia O: East Europe **Other frequencies available on request. SPECIFICATIONS (for Keyless Entry) Part No. Channels KAR-303CS KAR-304CS KAR-310CS KAR-314CS KAR-314CT KAR-315CS KAR-320CS KAR-345CS KAR-359CS KAR-417CS KAR-418CS KAR-423CS KAR-432CS KAR-433CS KAR-433CT KAR-479CS JPN US US US US US JPN US US UK UK EU EU EU EU JPN Resonant Frequency (MHz) 303.8750.25 304.300.25 310.000.25 314.000.25 314.500.25 315.000.25 320.650.25 345.000.25 359.900.25 417.500.25 418.000.25 423.220.25 432.920.25 433.920.25 433.420.25 479.500.5 Resonant Loss (dB) 4.0 Max. 2.5 Max. 3.2 Max. 2.3 Max. 23 SAW Resonators Sample Circuits RF Modulators SPECIFICATIONS (for Keyless Entry) KAR-303CK KAR-304CK KAR-310CK KAR-314CK KAR-314CL KAR-315CK KAR-320CK KAR-345CK KAR-359CK KAR-417CK KAR-418CK KAR-423CK JPN US US US US US JPN US US UK UK EU Resonant Frequency (MHz) 303.8750.25 304.300.25 310.000.25 314.000.25 314.500.25 315.000.25 320.650.25 345.000.25 359.900.25 417.500.25 418.000.25 423.220.25 KAR-432CK KAR-433CK KAR-433CL KAR-479CK KAR-303CF KAR-304CF KAR-310CF KAR-314CF KAR-314CG KAR-315CF KAR-320CF KAR-345CF KAR-359CF KAR-417CF KAR-418CF KAR-423CF KAR-432CF KAR-433CF KAR-433CG KAR-479CF EU EU EU JPN JPN US US US US US JPN US US UK UK EU EU EU EU JPN 432.920.25 433.920.25 433.420.25 479.500.5 303.8750.25 304.300.25 310.000.25 314.000.25 314.500.25 315.000.25 320.650.25 345.000.25 359.900.25 417.500.25 418.000.25 423.220.25 432.920.25 433. 920.25 433.420.25 479.500.5 Part No. Channels Resonant Loss (dB) Parallel Capacitance (pF) Temperature Characteristics (ppm/C) Dimension 8 Max. Fig. C 8 Max. Fig. D 4.0 Max. 2.5 Max. 3.2 Max. 2.3 Max. 4.0 Max. 2.5 Max. 3.2 Max. 2.3 Max. *JPN: Japan U: United States EU: Europe * For other frequencies, please contact your nearest sales office. 1 15.6 (.614) 1. L-ch 2. H-ch 3. GND 4. Common Fig. A 24 4 3 2 1 2.2 (.087) 4 3 2 1 12.0 (.472) Fig. B 4.40.5 (.1730.020) 3 1 7.2 (.283) 2 4-o0.45 max. (.157o0.018) 3 2 (.108) 2.75 3 2 3-2.51.0 (.118-.0980.039) 3 - 2.5 (.098) 9.0 (.354) 4 1 6.350.5 3.00.5 (.250.020) (.1180.020) 4 O 0.65 (.026) 5.0 (.197) 2.5 2.5 (.098) (.098) 3.0 (.118) O 0.45 (O.018) 4 O 0.65 (.026) 11.00.5 (.4330.020) 3.0 (.118) 7.7 (.303) 7.7 (.303) 3.2 (.126) 3.5 (.138) DIMENSIONS O 5.08 (.20) O 9.20 1. Hot 2. Hot 3. Ground 1. L-ch 2. H-ch 3. GND 4. Common Fig. C 2.21.0 (.0860.039) Fig. D 1. Hot 2. Ground 3. Ground 4. Hot Surface Acoustic Wave Resonators ATTENUATION vs FREQUENCY KAR--61CT U.S. CHANNEL 3 IMPEDANCE and PHASE ANGLE KAR--61CT U.S. CHANNEL 3 Ref: 80 Phase Angle 0 Phase Angle Frequency (MHz) 61.550 61.450 20 61.350 -9 100 80 60 40 61.250 -8 -50 200 61.150 -40 1,000 800 600 400 61.050 -7 2,000 60.950 -35 S22 - Attenuation (dB) -6 62.040 -5 -30 61.840 -4 -25 61.640 -20 61.440 -3 61.240 -2 -15 61.040 -10 60.840 0 -1 60.640 0 -5 60.440 S21 - Attenuation (dB) 5,000 Frequency (MHz) Attenuation Change at Resonance with Temperature KAR-61CT U.S. Channel 3 +0.1 -20C 0C U.S. Channel 4 +0.2 25C 0 40C 60C -0.1 ATT (dB) ATT (dB) +0.2 +0.1 -20C 0C 25C 0 40C 60C -0.1 -0.2 -0.2 Resonant Frequency Change with Temperature KAR-61CT U.S. Channel 4 U.S. Channel 3 +10 +10 +5 25C 0 -20C -5 -10 0C 40C 60C fr (ppm) fr (ppm) +5 25C 40C 60C 0 -20C 0C -5 -10 -15 -15 -20 -20 -25 -25 25 MHz Band Quartz Crystals SMD Type - KSX Series FEATURES HOW TO ORDER 1) Reference frequency for telecommunicaton system 2) High reliability ceramic package 3) 1000 pieces per reel 4) Sold in increments of 2000 pieces KSX - 36 - 192M - **** 1 2 3 1 Model: KSX-36 2 Frequency: 19.2 MHz 3 Specification: 4 digits on end of part number SPECIFICATIONS (KSX) Parameters Code Specification Remarks Frequency Range fo 12~22MHz See available frequencies below Load Capacitance CL 12.0pF Frequency Tolerance f/f 10ppm Storage Temperature Tstg -40C~+85C Operating Temperature Topr -30C~+80C Frequency Stability vs. Temperature f/T 10ppm -10C~+60C (+25C standard) Crystal Impedance CI 30 (max.) 0/25/50C & 1W/100W +252C DIMENSIONS 4.4 6.0+/-0.1 4-R0.2 #2 #4 #3 #1 #2 RECOMMENDED REFLOW PROFILE (C) 1.7 2455C 300 1.5 2.4 #3 1.4 RECOMMENDED LAND PATTERN #4 #3 #4 1.0 max. 1.0 1.5 3.5+/-0.1 3.0 #1 200 #1 #2 4.4 16010C 90 sec. 20 sec. max. 200C min. 70 sec. max. 100 4 Terminals type, #2 and #4 are for G. FREQUENCY (MHz) 12.00 12.600 13.000 13.8650 14.850 16.368 19.200 19.800 21.145 21.400 12.500 12.800 13.824 14.400 15.360 16.800 19.680 20.945 21.250 26.000 26 MHz Band Quartz Crystals Leaded Type - KT Series FEATURES HOW TO ORDER 1) Reference frequency for telecommunication system 2) High stability of characteristics due to vacuum pack can 3) Reflow solderable (Drift after solder:1ppm) 4) Bulk packaged 500 pieces/bag 5) Sold in increments of 2000 pieces KT-308 - 192M **** 1 2 3 1 Model: KT-308 2 Frequency: 19.2MHz 3 Specification: 4 digits on end of part number SPECIFICATIONS (KT) Parameters Code Specification Remarks Frequency Range fo 12~22MHz See available frequencies below Load Capacitance CL 13.0pF Frequency Tolerance f/f 10ppm Storage Temperature Tstg -40C~+85C Operating Temperature Topr -30C~+80C Frequency Stability vs. Temperature f/T 10ppm -10C~+60C (+25C standard) Crystal Impedance CI 30 (max.) -10/25/50C & -10dbm/-30dbm +252C DIMENSIONS AND MARKING o1.1 0.1 A 7 25 1 2 3 +0.1 o3.0 -0.05 * 4 +0.1 o3.0 -0.05 A : Frequency (19.2MHz) 7 : Production Year (1997) 25: Production Week (25th week) : Option * +0.1 8.8 -0.05 +0.1 10.5 -0.05 FREQUENCY (MHz) 12.00 12.800 13.824 14.400 15.360 16.800 20.945 19.800 21.250 12.600 13.000 13.8650 14.850 16.368 19.200 19.800 21.145 21.400 27 AVX/Kyocera Clock Oscillators GENERAL DESCRIPTION to what is is called the piezoelectric effect. At one particular frequency, which is determined by the geometry and size of the crystal, vibration will occur much more easily than at any other frequency. This is called the "resonant" frequency. If an oscillation circuit is built around this crystal, the mechanical vibrations can be used to control the electrical oscillations very precisely. AVX/Kyocera builds its high quality clock oscillators from the substrate up. The whole module is hermetically sealed into an all-metal welded package to protect it from humidity. The case is directly grounded into a pin to help minimize RF radiation and meet FCC's EMI specifications. A full range of clock oscillators are manufactured by AVX/Kyocera. These extend from 1 MHz up to 72 MHz and include TTL and HCMOS compatible drive levels. AVX/ OSCILLATION DEVICES Kyocera also offers special low power consumption clocks Various types of circuits can be used to generate tim- for long life battery applications. (See chart page 28.) Aping waveforms for electronic devices. The simplest of these plication specific designs for critical requirements of today's is a simple circuit using capacitors, inductors and an active high-speed, 32-bit microprocessors are available. element such as a transistor or operational amplifier. This is an easy, low cost solution but the frequency is not very WAVEFORM stable due to temperature and individual component variaThe diagram below shows a typical waveform of a tions. A more stable circuit would utilize a ceramic resona- clock oscillator with an explanation of the parameters imtor, which has the advantage of better frequency tolerance, portant for correct selection of the appropriate device. Often called the symmetry of a waveform, duty cycle is but resonators are only available in certain frequency ranges and stability of 0.5% is the best that can be achieved. If a measure of how close to being equal the high and low better frequency stability is needed, then the most popular parts of a waveform are. A perfectly symmetrical waveform method is to use a circuit which relies on the piezoelectric will have duty cycle of 50%. We usually specify the minimum and maximum variations of the duty cycle as, for properties of quartz crystals to stabilize the oscillation. If an alternating electrical field is applied to a cut and example: 60/40%. This is computed from the times shown polished quartz crystal, the crystal lattice will deform due on the diagram below as A /A+B. Clock oscillators are devices which generate the pulses to control the timing and operation of logic circuitry. They differ from other components used to control the timing of logic circuits, such as quartz crystals and ceramic resonators, in that clock oscillators need a power supply but no additional external circuitry to operate. Clock oscillators are usually made by combining in a single package a frequency control device such as a quartz crystal, and a hybrid circuit of resistors, capacitors, and either transistors or an integrated circuit. The package is often either a welded steel can or ceramic package hermetically sealed which protects the crystal and electronics from environmental effects and also reduces the unwanted electromagnetic and radio-frequency emissions which oscillators can generate. Series TTL K50 -HC* -C KXO -01 KXO -HC* -T (KHO -HC* -T) HCMOS K50 -HC* -C K50 -CS* -SE KXO -HC* -C (KHO -HC* -C) 386 -HC Low Voltage K50 -3C (3.3V) Output Frequency (MHz) Fan Out 8 to 68 8 to 50 1 to 72 Output Level Features VOH Min VOL Max 50pF 10 TTL 10 TTL 0.9 VDD 2.4 2.4 0.1 VDD 0.4 0.4 CMOS/TTL Drive Cost Performance Versatile Drive Capabilities 8 to 68 8 to 50 1 to 72 24,32,40,50 50pF 15pF 50 pF 7 TTL 0.9 VDD VDD-0.5 0.9 VDD 0.9VDD 0.1 VDD 0.5 0.1 VDD 0.1 VDD CMOS/TTL Drive Low Power Consumption Versatile Drive Capabilities Drives 80386 8 to 68 15pF 0.9 VDD 0.1 VDD Low Supply Voltage Will also drive TTL. See catalog for details - page 31. Cordless & Cellular Phones Temperature Compensated KT11 KT12 KT14 VCO 28 Frequency (MHz) 12.8, 13.0, 14.4, 14.85, 15.36, 16.8, 19.2 12.8, 13.0, 14.4, 16.8, 19.2, 19.68 13.0, 14.4, 14.85, 16.8, 19.2, 19.44, 19.68, 19.8 200~2000 Output Features 1Vp-p/10k /10pF 1Vp-p/10k /10pF 1Vp-p/10k /10pF Surface Mount Miniature Surface Mount Ultra Low Profile Surface Mount High Performance Surface Mount AVX/Kyocera Clock Oscillators GENERAL DESCRIPTION continued CLOCK OSCILLATOR APPLICATIONS In a typical personal computer system 5 or 6 clock oscillators may be used in the main processing unit, for all the add-on boards, video graphics adapters, co-processors, etc., and all the peripheral devices such as printers, modems and networking equipment. Many different companies may be involved in the manufacture of all these individual parts of the system. The telecommunications industry uses clock oscillators in fax machines, cellular phones, pagers, and radio systems. These oscillators are typically very high precision, temperature compensated and voltage controlled devices. Clock oscillators are manufactured by combining a quartz crystal into a hybrid module containing passive components and active digital devices. AVX/Kyocera builds its high quality clock oscillators from the substrate up. The whole module is hermetically sealed into an all-metal welded package to protect it from humidity. The case is directly grounded to a pin to help minimize RF radiation and meet FCC's EMI specifications. PACKAGING The diagrams below show the basic design of the 14 pin and 8 pin DIP (dual inline packages) and ceramic SMT packages in which most of the clock oscillators are available. Leaded oscillators are tube packaged. SMT K50 units are tape and reel packaged 1000 units per reel. Tube packages hold 25 units each for the KXO-01 and KXO-HC series, and 40 units each for the KHO-HC series products. FREQUENCY vs. POWER SUPPLY CURRENT VDD 5.0V 60 60 50 50 50pF (CMOS Load) 40 40 2 2 IDD (mA) 30 30 IDD (mA) 3 20 20 15pF (TTL Load) 3 K50-CS 1 1 4 10 10 K50-3C 0 0 0 10 20 30 40 50 60 70 0 80 10 20 40 1. KXO-01 2. KXO-HC-C/KHO-HC-C 3. KXO-HC-T/KHO-HC-T 1. 2. 3. 4. 70 80 CLOCK OSCILLATOR GENERAL CONSTRUCTION 1 2 3 4 5 6 7 8 9 H 2.4V 0.9VDD 1.4V 0.5VDD 0.4V L 0.1VDD 1 B 4 3 2 A 60 K50-CS K50-HC-C (CMOS Compatible) K50-HC-C (TTL Compatible) K50-3C TR TF 50 FREQUENCY (MHz) FREQUENCY RANGE (MHz) OUTPUT WAVEFORM 30 5 6 Duty = A Ratio A+B 7 9 Chip components Crystal IC Cap Crystal supporter Thick film substrate Stem Stand-off Lead pin 8 PACKAGES 8 Pin DIP 14 Pin DIP #1 #14 #7 #8 #1 #8 4 Pad SMD #4 #5 #1 #2 #4 #3 29 AVX/Kyocera Crystal Clock Oscillators MECHANICAL Readings to be made one hour after completion of test. Shock Resistance - Drop module onto a hard wooden surface from a height of 50cm, three times. Unit must meet initial electrical requirements after test. Vibration Resistance - Vibrations with an amplitude of 1.5mm and a sweep between 10 and 55Hz of 1 minute shall be applied for 2 hours in each of the X, Y, and Z axes for a total test time of 6 hours. Unit must meet initial electrical requirements after test. Pin Pull and Bend - A load of 1kg shall be applied for 30 seconds in the direction of each pin. The pin will withstand without damage a bend from its base of 90 in one direction twice. Unit must meet initial electrical requirements after test. Solvent Resistance - After immersion in Freon TF, Freon TE or IPA Liquid, at 255C for a period of 10 minutes, unit shall meet initial electrical requirements. Ultrasonic Resistance - Unit shall withstand ultrasonic washing at 28 to 31kHz and 300 watts per 20 liters of fluid in either Freon TF, Freon TE or IPA for up to 30 seconds without damage. ENVIRONMENTAL Readings to be made two hours after completion of test. Soldering Heat - Immerse pin to within 1mm of the glass stand-off in a solder bath of 28010C for 10 seconds. Unit shall meet initial electrical requirements after test. Heat Resistance - After exposure to +85C for 500 hours, frequency change shall be within 10ppm of initial value. Cold Resistance - After exposure to -40C for 500 hours, unit must meet initial electrical requirements. Humidity Resistance - After exposure to +85C and 85% RH for 500 hours, unit must meet initial electrical requirements and show no significant rusting. Thermal Shock - After 15 cycles of immersions in baths of 100C and 0C for 5 minutes with transfer times within 10 seconds, units will meet initial electrical requirements. Hermeticity - Helium leak detector test should be performed under 5 x 10-7 atm, and measured after application of 10kg/sq cm of pressure for three hours and exposure to air for 30 minutes. No air bubbles shall be found when immersed in 75C water for 5 minutes. AVX/Kyocera Crystal Clock Oscillator 30 K50-HC-C Series Miniature SMT Crystal Clock Oscillators HCMOS Compatible O: 8 to 68 MHz Features: How to Order 1) Miniature SMT ceramic package 2) Frequency: 8~68MHz 3) Stability: 100ppm, 50ppm 4) Load: 50pF maximum 5) Tristate output inhibit 6) Hermetically sealed package 7) 1000 pieces per reel 8) Sold in increments of 1000 pieces K50-HC 1 CS E 40.0000M R 1 2 3 4 5 6 1 Type: (K50-HC series) 2 Stability: 1-100ppm, 0-50ppm 3 Output compatibility: CS = CMOS 45/55 duty cycle @ 50% VDD CS = TTL 40/60 duty cycle @ 1.4 volts 4 Tristate output: E with function 5 Frequency (MHz) 6 Packaging: R=Tape and reel SPECIFICATIONS (K50-HC) Parameters Output Frequency Frequency precision Operating temp. Storage temp. Supply voltage Supply current Duty cycle Output "0" level Output "1" level Rise / Fall time Code fOUT f/f tOPR tSTOR VDD IDD SY VOL VOH TR/TF Load Enable/disable time Aging rate Input voltage-high Input voltage-low VIH VIL TTL Output Rating Remarks 8~68 1=100, 0=50 -10 to 70C, VDD=50.5V -10 to +70 -55 to +125 5 0.5 40 max @ 10TTL/15pF 25C, 50MHz 40/60 at 1.4 volts 0.4max @IOL = 16mA 2.4min @IOH = -1mA 5max 0.4V-2.4V fo50MHz=50pF fo>50MHz=15pF 100max 5max 2.2min 0.8max CMOS Output Rating Remarks 8~68 1=100, 0=50 -10 to 70C, VDD=50.5V -10 to +70 -55 to +125 5 0.5 50 max @ 50pF 25C, 50MHz 45/55 @50%VDD 0.5max @IOL = 16mA VDD-0.5min @IOH = -1mA 10max 10-90%VDD, 50pF fo50MHz=50pF fo>50MHz=15pF 100max 5max 2.2min 0.8max Unit MHz ppm C C V mA % V V nS nS ppm/y V V TEST CIRCUIT TTL Output CMOS Output VDD 400 A A 3 1 2 NC V VDD 4 15pF 3 1 2 NC V VDD 4 50pF 0.1F 0.1F OUTPUT WAVEFORM TTL Output TR CMOS Output TF TR TF 90%VDD 50%VDD 2.4 Volts 1.4 Volts 10%VDD 0.4 Volts A B Duty cycle = A/(A+B)X100% A B Duty cycle = A/(A+B)X100 31 K50-3C Series Miniature SMT Crystal Clock Oscillators 3.3 Volt O: 8 to 68 MHz Features How to Order 1) 3.3 volt operation 2) Tristate output inhibit and oscillation shutdown to reduce power supply current draw 3) Miniature SMT ceramic package 4) Frequency: 8 to 68MHz 5) Stability: 100ppm 6) Load: up to 15pF 7) Hermetically sealed package 8) 1000 pieces per reel 9) Sold in increments of 1000 pieces K50-3C 1 E 40.0000M R 1 2 3 4 5 1 2 3 4 5 Type: (K50-3C series) Stability: 1-100ppm Tristate o/p and shutdown: E with function Frequency (MHz) Packaging: R=Tape and reel SPECIFICATIONS (K50-3C) Parameters Code Rating Unit Output Frequency fOUT 8 to 68 MHz Frequency precision DF/F 1=100, 0=50 ppm Operating temp tOPR -10 to +70 C Storage temp tSTOR -55 to +125 C Supply voltage VDD 3.3 10% V Supply current(1) IDD(1) 25 max @ 15pF mA Remarks -10 to 70C, VDD=3.310% 25C, 68MHz Oscillation shutdown (pad #1= low, pad #3=high imp.) IDD(2) 100 max A Duty cycle SY 40/60 % @50%VDD Output "0" level VOL 10% VDD max V @15pF load Output "1" level VOH 90%VDD min V @15pF load Rise / Fall time TR/TF 10max nS 10%-90%VDD, 15pF 15max pF or 5LSTTL 5 mS 8.0000 to 32.0000MHz 150max nS 32.0001 to 50.0000MHz 5 mS 50.0001 to 68.0000MHz 5max ppm/y Supply current(2) Load Enable/disable time Aging rate Input voltage-high VIH 2.0min V Input voltage-low VIL 0.5max V TEST CIRCUIT VDD = 3.3V, IIH = 10A OUTPUT WAVEFORM TR A VDD V 4 3 1 2 NC TF 90%VDD 50%VDD 15pF 0.1F 10%VDD A 32 B Duty cycle = A/(A+B)X100 K50-CS Series Miniature SMT Crystal Clock Oscillators Low Power Consumption O: 8 to 50 MHz Features How to Order 1) Miniature SMT ceramic package 2) Low power consumption 3) Frequency: 8-50MHz 4) Stability: 100ppm, 50ppm 5) Load: 15pF 6) Tristate output inhibit 7) Hermetically sealed package 8) 1000 pieces per reel 9) Sold in increments of 1000 pieces K50-CS 1 S E 40.0000M R 1 2 3 4 5 6 1 2 3 4 5 Type: (K50-CS series) Stability: 1-100ppm, 0-50ppm Duty cycle: S-45/55 Tristate o/p: E with function Frequency Packaging: R=Tape and reel 6 SPECIFICATIONS (K50-CS) Parameters Code Rating Unit Output Frequency fOUT 8 to 50 MHz Frequency precision f/f 1=100, 0=50 ppm Operating temp tOPR -10 to +70 C Storage temp tSTOR -55 to +125 C Supply voltage VDD 5 0.5 V Supply current IDD 30 max @ 15pF mA 25C, 50MHz Duty cycle SY 45/55 % @50%VDD Output "0" level VOL 0.1VCC max V @IOL = 4.0mA Output "1" level VOH 0.9VCC min V @IOH = -4.0mA Rise / Fall time TR/TF 10max nS 0.1VCC-0.9VCC Load 15max pF Enable/disable time 100max nS Aging rate 5max ppm/y Input voltage-high VIH 2.2min V Input voltage-low VIL 0.8max V Remarks -10 to 70C, VDD=50.5V OUTPUT WAVEFORM TEST CIRCUIT TR A VDD V 4 3 1 2 NC TF 90%VDD 50%VDD 15pF 0.1F 10%VDD A B Duty cycle = A/(A+B)X100 33 K50 Series Miniature SMT Clock Oscillators Ceramic Package DIMENSIONS 1.4 (.055) Output Frequency 4 5.00.2 (.197.008) Frequency Precision *1 3 Pad # 1 2 3 4 40.0000 1B W01 1.1 (.043) 2.40.2 (.094.008) R0.35 1 5.080.15 (.200.006) Pin 1 Indication 2 Lot Number Model *2 7.020.2 (.276.008) *Logic "0" disables o/p 1.60.2 (.06.008) 0.750.1 (.030.004) Function Output Disable* GND/ Case GND Output +VDD Units: mm (inches) *Marking: *1) 1 = 100ppm, 0 = 50ppm. *2) A = CS-E, B = HC-CSE, L = 3C-LE (3.3 volt) FREQUENCY VS. POWER SUPPLY CURRENT SOLDERING Suggested Solder Pad Layout Suggested IR Reflow Profile 50 1.8 (.071) Temp C 240 5 50pF (CMOS Load) 40 10 sec Place decopling capacitor as close to oscillator as possible 2.0 (.079) 2 30 IDD (mA) 4.2 (.165) 150 10 3 20 15pF (TTL Load) K50-CS 1 0.1F 90 sec 4 10 K50-3C 5.08 (.200) 0 Time: sec 0 10 20 30 40 50 60 70 80 FREQUENCY (MHz) Units: mm (inches) ENABLE/DISABLE FUNCTION CHART K50-HC-C, K50-CS Series #1 Pad #3 Pad High or Open Oscillation Low K50-3C-L Series #1 Pad #3 Pad High Oscillation High Impedance Low Oscillation Stops High Impedance PACKAGING Reel Dimensions Embossed Carrier Tape Dimensions 1.25 (.049) 1.5 (.059) 2.0 (.079) 125.0 (4.92) 10.0 (.393) 2.5 (.098) 13.0 (.512) 21.0 (.827) 16.0 (.630) Detail of Hub 5.75 (.226) 50.000 1A T01 60.0 (2.36) 17.0 (.669) 2.1 (.083) 1.75 (.069) 50.000 1A T01 180.0 (7.09) 4.0 (.157) 7.65 (.301) 0.3 (.012) 8.0 (.315) Units: mm (inches) 34 KT11 Series SMT Crystal Clock Oscillators Temperature Compensated FEATURES HOW TO ORDER 1) Frequency adjustment free after reflow soldering process 2) Ultra miniature type (11X9X4mm) 3) AFC function available (option) 4) 3V/5V drive available 5) 1000 pieces per reel 6) Sold in increments of 1000 pieces KT11 - E G R 30 N - 19.200M T 1 2 3 4 5 6 7 8 Type Frequency precision: D=2ppm, E=2.5ppm, K=5ppm Lower temperature limit: C=-30C; E=-20C, G=-10C Upper temperature limit: R=60C; T=70C; V=80C Supply voltage: 30=3.0V; 50=5.0V AFC function; V=with; N=without; L=with (trimmerless) Frequency: See table below. Packaging: T=Tape and reel 1 2 3 4 5 6 7 8 SPECIFICATIONS Frequency VDD Output (10k /10pF) Current consumption (no load) 19.200MHz/PHS 3V5% 1.0Vp-p min. 2.0mA max. 2.5ppm (-10~+60C) 0.2ppm max. 0.3ppm max. 3.0ppm min. 4~8ppm (30ppm:Trimmerless type) -3dBc max. 1.0ppm / y max. Temperature Frequency stability (f/fa) Load (10pF/10k 10%) Voltage (3.0V 5%) Trimmer adjustment (f/fa) Voltage control (1.5V1.0V) f/V Spurious ratio Aging TEST CIRCUIT (EXCEPT FOR HARMONIC) 12.8, 13.0, 14.4, 14.85, 15.36, 15.9, 16.8MHz/Cellular 3V or 5V5% 1.0Vp-p min. 2.0mA max. 5.0, 2.5, 2.0ppm max. (-30~+80C) 0.2ppm max. 0.3ppm max. 3.0ppm min. 4~8ppm (30ppm:Trimmerless type) -3dBc max. 1.0ppm / y max. TEST CIRCUIT (HARMONIC) A A Synchroscope Counter Power Supply VDD 4 V Spectrum Analyzer 3 Oscillator 1 2 Power Supply VDD C1 4 V 3 Oscillator 1 2 100K 10pF 10K N.C. or Vcon N.C. or Vcon 10K C1: 10pF inclusive of test jig and probe capacitance RECOMMENDED PAD LAYOUT 0.90.2 DIMENSIONS Freq. Adj. 4 2 1.5 2 Pad # 1 2 3 4 3 4.0max 1.0 Function N.C. or Vcon GND/Case GND Output +VDD TAPING DIMENSIONS 1.75 6.40 1.20 #1 PIN (N.C. or Vcon) Units: mm 7.620.3 O1.6 #3 PIN (Output) 7.2 EGR30N 19.200MT 9613 1 0.90.2 1 3 (7.2) 9.00.3 2.4 4 #4 PIN (VDD) 7.620.3 1.5 11.00.3 1.20 #2 PIN (GND) Units: mm RECOMMENDED REFLOW PROFILE 2.0 4.0 (C) 9.5 12.0 R05 max. 200 150 0.4 4.2 Feeding direction O100 O1.6 16.0 1.4 O21 O330 24.0 11.5 12.0 11.7 300 O13 3.0 24.4 Over 200C 15 sec. max. Peak 230C5C Over 180C 100 40 sec. max. Units: mm 35 KT12 Series SMD Crystal Clock Oscillators Temperature Compensated FEATURES HOW TO ORDER 1) Miniature SMD type (11.6x9.6x2.3mm) 2) Frequency adjustment free after reflow soldering process 3) AFC function available (option) 4) 3V/5V drive available 5) Frequency stability: 2ppm at -30~+80C 6) 2000 pieces per reel 7) Sold in increments of 2000 pieces KT12 - D C V 33 V - 19.680M T 1 2 3 4 5 6 7 8 9 1 Type 2 Terminals: Blank ( )=4 terminals, A=6 terminals B=8 terminals 3 Frequency stability: D=2ppm, E=2.5ppm, K=5ppm 4 Lower operaing temp.: C=-30C; E=-20C, G=-10C 5 Upper operating temp.: R=60C; T=70C; V=80C 6 Supply voltage: 30=3.0V; 50=5.0V 7 AFC function; V=with; N=without; L=with (trimmerless) 8 Frequency: See table below 9 Packaging: T= Tape and reel SPECIFICATIONS Parameters Specification Code Supply Voltage Vcc Output Frequency Fout Operating Temp. Storage Temp. Topr Tstr Frequency Stability f/fo Aging Rate Output Voltage Supply Current Trimmer Control Range Voltage Control Range Harmonics PHS Unit Cellular 3.0V5% 5.0V5% 19.680 19.200 19.200 16.800 14.400 13.000 12.800 -10 ~ 60 -30 ~ 80 max. -20 ~ 70 -40 ~ 85 2.0 max. 2.5 max. 2.5max. 0.2 max. 0.3 max. 1.0 max. 1.0 min. 2.0 max. 3.0 min. ex: 4.0 ~ 8.0 -3.0 max. 3.0V5% Aging Vout Icc f/C f/V -- DIMENSIONS V MHz -- C C -- -- vs. Temp. (After Reflow) ppm vs. Load vs. Voltage 1 Year Load 10k /10pF -- Internal Trimmer 1.5V1V, 2.51V -- ppm/year Vp-p mA ppm ppm dBc RECOMMENDED LAND PATTERN 3 1.2 4 0.7 1.0 1.60 Pad No. Function 1 2 3 4 NC or Vcon GND/Case GND OUTPUT +Vcc 1.60 (7.2) Freq. Adj. 1.40 #3 Pin (Output) TEST CIRCUIT (AMPLITUDE) #4 Pin (N.C. or Vcon) 4.60 2 1 Marking 9.60.3 #2 Pin (GND) 7.620.15 1.2 11.60.3 2.3 max. Remarks TEST CIRCUIT (HARMONICS & FREQUENCY) 3.68 1.40 #4 Pin (VCC) RECOMMENDED REFLOW PROFILE (IR REFLOW) (C) Peak: 2305C 15 sec. max. 250 A A Synchronized Scope Counter Power Supply Vcc V 4 3 Oscillator 1 2 Vcon or N.C. C1: Probe Capacitance (10pF) 10k 10% C1 Spectrum Analyzer Power Supply Vcc V 4 3 Oscillator 1 2 Vcon or N.C. 200 180 15010C 150 10k 10% 10pF 10% 100 180C min. 40 sec. max. 50 60 sec. 60 sec. 0 (sec.) 36 KT14 Series SMD Crystal Clock Oscillators Temperature Compensated FEATURES HOW TO ORDER 1) Ultra low profile SMD type (9.0x7.0x1.7mm) 2) Fequency adjustment free after reflow soldering process 3) AFC function available (option) 4) 2.8, 3.0, 3.3V drive available 5) 2000 pieces per reel 6) Sold in increments of 2000 pieces KT14 - E C T 28 L - 19.440M T 1 2 3 4 5 6 7 8 Type Frequency stability: D=2ppm, E=2.5ppm, K=5ppm Lower operating temp.: C=-30C; E=-20C, G=-10C Upper operating temp.: R=60C; T=70C; V=80C Supply voltage: 28=2.8V; 50=3.0V AFC function; V=with; N=without; L=with (trimmerless) Frequency: See table below. Packaging: T=Tape and reel 1 2 3 4 5 6 7 8 SPECIFICATIONS Parameters Specification Code PHS Supply voltage Vcc 2.8V5% Output Frequency Fout 19.200 Operating Temp. Storage Temp. Topr Tstr -10 ~ 60 -20 ~ 70 2.5 max. Frequency Stability f/fo Aging Rate Output Voltage Supply Current Trimmer Control Range Voltage Control Range Harmonics Aging Vout Icc f/C f/V -- Cellular 2.8V5% 3.0V5% 3.3V5% 13.000 14.400 14.850 16.800 19.200 19.440 19.680 19.800 -30 ~ 80 max. -40 ~ 85 2.0 max. 2.5 max. 0.2 max. 0.3 max. 1.0 max. 1.0 min. 2.0 max. -- ex: 8.0 ~ 15.0 -3.0 max. 3.0 min. -- DIMENSIONS Unit Remarks V -- MHz -- C C -- -- vs. Temp. (After Reflow) ppm vs. Load vs. Voltage 1 Year Load 10K /10pF No Load -- 1.5V1V, 2.51V -- ppm/year Vp-p mA ppm ppm dBc 1.20.1 RECOMMENDED LAND PATTERN #2 Pin (GND) Freq. Adj. 1.4 0.5 1.7 max. 1.20.1 #1 pin mark Pad No. 1 2 3 4 Function NC or Vcon GND/CASE GND OUTPUT +Vcc 4.60 (4.6) 7.00.3 Marking #4 Pin (N.C. or Vcon) 1.60 5.080.15 1.60 9.00.3 1.40 3.68 1.40 #3 Pin (Output) TEST CIRCUIT (AMPLITUDE) TEST CIRCUIT (HARMONICS & FREQUENCY) #4 Pin (VCC) RECOMMENDED REFLOW PROFILE (IR REFLOW) Temperature (C) A Synchronized Scope Counter Power Supply Vcc Peak: 2305C 15 sec. max. 250 A V 4 3 Oscillator 1 2 Vcon or N.C. C1: Probe Capacitance (10pF) 10k 10% C1 Spectrum Analyzer Power Supply Vcc V 4 3 Oscillator 1 2 Vcon or N.C. 200 180 15010C 150 10k 10% 10pF 10% 100 180C min. 40 sec. max. 50 60 sec. 60 sec. 0 Time (sec.) 37 Voltage Control Oscillator VK Series - Surface Mount O: 100 to 700 MHz FEATURES HOW TO ORDER 1) Covers UHF band 2) For PDC mixing and PHS 2nd local 3) Available 2.2V, 3mA typ. 4) Small (9x7mm) 5) Low profile (2.00mm max.) 6) 2000 pieces per reel 7) Sold in increments of 2000 pieces VK - 120 R 0130 A1 W 1 2 3 4 5 6 1 2 3 4 5 6 Series: VK=100~700MHz Dimensions: 120=9x7mm Applications: R=RX Frequency: 0130=130MHz Individual specification Packaging: W = Tape and reel SPECIFICATIONS Parameters Specifications Supply Voltage Current Consumption Frequency Output Level Tuning Voltage Sensitivity C/N (Phase Noise) PSU Stability Temperature Stability Unit Condition 2.20.2 V 4.0 mA -- 129.545 MHz -33 dBm 2.51.0 MHz/V 70 dBc 200 kHz Vcc=2.2V 1 MHz -20 ~ +70C Ta=255C Vcc=2.20.05[V] Vt=0.5 ~ 2.5V Ta=255C Vcc=2.20.05[V] [f(2.5) - f(0.5)]/2.0 off-set 25kHz 0.2V @25C Pulling Stability 200 kHz Spurious Level -10 dBc Reference is fundamental, Harmonics Level -20 ~ 70 C -- Operating Temp. Range DIMENSIONS and PAD CONNECTION VSWR=2 16kHz B.W. All phase RECOMMENDED LAND PATTERN VK-120 4 1 2 3 2.0 max. 38 1.7 5 7.0 6 Pad # Function 1 Vt 2 GND 3 VCC 4 OUT 5 GND 6 GND 6.7 9 1.0 3.6 3.5 3.5 Voltage Control Oscillator EK Series - Surface Mount O: 700 to 1300 MHz FEATURES HOW TO ORDER 1) High reliability construction 2) Reflow soldering available 3) High performance for C/N and S/N 4) 2000 pieces per reel 5) Sold in increments of 2000 pieces EK - 304 R 0972 AA W 1 2 3 4 5 6 1 2 3 4 5 6 Series: EK=700~1300MHz Dimensions Applications: R=RX Frequency: 0927=927MHz Individual specification Packaging: W = Tape and reel SPECIFICATIONS Specifications (Ta=25C) Type Frequency (MHz) Part No. N-TACS 765 ~ 800 PDC AMPS System Module Vcc (V) Icc (MA) Po (DBM) FTU (MHZ/V) C/N (dBc) EK-304R0783A1 3 0.2 9 max. -13 233 65 min. 1069~ 1090 EK-304R1080A1 2.2 0.2 6 max. -33 253 70 min. 914~939 EK-304R0927A9 2.55 0.05 12 max. +32 142 108 min. 1310 ~ 1393 EK-304R1352A2 2.8 10 0.1 max. ( ( TOP (C) ) ) 12.5kHz off BW 8kHz -20 ~ 70 50kHz off BW21kHz -20~ 80 (20kHz off) -30~ 85 RX PCS GSM 1006~ 1031 EK-304R1019A6 PDC 780 ~ 841 EK-304R0811A1 394 -6 min. -10 ~ 75 (25kHz off) 100 min. 153 2.2 0.2 8 max. -13 467 -20~ 75 67 min. ( 50kHz off 21kHz BW ) -30 ~ 85 Vcc: Power supply,Icc: Current consumption,Po: Output level, FTU: Tuning voltage sensitivity, TOP: Operating temperature range DIMENSIONS and PAD CONNECTION RECOMMENDED LAND PATTERN EK-304 4 1 2 3 2.0 max. 1.7 5 7.0 6 Pad # Function 1 Vt 2 GND 3 VCC 4 OUT 5 GND 6 GND 6.7 9 1.0 3.6 3.5 3.5 39 Voltage Control Oscillator YK Series - Surface Mount O: 700 to 1600 MHz FEATURES HOW TO ORDER 1) SMD type 2) Covers 700~1600Mhz band 3) Small (7.8X6.0mm), Low Profile (2.00mm max.) 4) 2000 pieces per reel 5) Sold in increments of 2000 pieces YK - 501 R 1171 A1 W 1 2 3 4 5 6 1 2 3 4 5 6 Series: YK=700~1600MHz Dimensions Applications: R=RX Frequency: 1171=1171MHz Individual specification Packaging: W=Tape and reel ELECTRICAL CHARACTERISTICS Parameters Specifications Unit Condition 2.60.1 V -- 8.0 mA 1136 ~ 1206 MHz -6 dBm Tuning Voltage Sensitivity 467 MHz/V C/N (Phase Noise) 98 dBc/Hz 1000 kHz Vcc=2.6V 3 MHz -10 ~ 60C Pulling Stability 1.5 MHz VSWR=2 Spurious Level -10 dBc Reference is fundamental -10 ~ 60 C -- Supply Voltage Current Consumption Frequency Output Level PSU Stability Temperature Stability Operating Temp Range Ta=255C Vcc=2.50.05[V] Vt=0.3 ~ 2.4[V] Ta=255C Vcc=2.50.05[V] [f(2.4)-f(0.3)] /2.1 off set 25kHz 1Hz B.W. 0.1V ref 25C All Phase *Covering frequency range is between 700MHz ~ 1600MHz DIMENSIONS and PAD CONNECTION RECOMMENDED LAND PATTERN GND 2.0 max. 40 5 Pout 4 2.65 6 GND GND GND 1 2 2.4 1.0 3 Pad # Function 1 Vt 2 GND 3 VCC 4 OUT 5 GND 6 GND 1.5 6.2 max. (5.0 typ.) 8.0 max. (7.8 typ.) Vt 3.4 1.0 GND Vcc 3.0 3.9 Voltage Control Oscillator RK Series - Surface Mount O: 1.3 to 2.0 GHz FEATURES HOW TO ORDER 1) Ultraminature size based on low temperature co-firable laminated substrate technology 2) Printed conductive line on inner layer contributes to ultra high density mounting 3) Reflow soldering available 4) 2000 pieces per reel 5) Sold in increments of 2000 pieces RK - 405 R 1668 A1 W 1 2 3 4 5 6 1 2 3 4 5 Series: RK=1300~2000MHz Dimensions Applications: R=RX Frequency: 1668=1668Mhz Individual specification Packaging: W=Tape and reel 6 ELECTRICAL CHARACTERISTICS Type System Module Frequency (MHz) PHS RX 1647 ~ 1669 RK-405R1658 3.0 0.15 6.5 max. PHS RX 1651 ~ 1685 RK-405R1668 3.0 0.15 6.5 max. Part No. Specifications (Ta=25C) fTU Vcc Icc Po (V) (mA) (dBm) -13 (MHz/V) 245 Vt=0.5 ~ 2.5V C/N Top (C) Min 123 min Typ (600kHz off ) 128 -20C ~ +60C 127 -20C ~ +60C 123 min. 316 -13 Vt=0.5 ~ 2.5V (600kHz off ) Vcc: Power supply, Icc: current consumption, Po: Output level, ftu: tuning voltage sensivitiy, Top: Oeration temperature DIMENSIONS and PAD CONNECTION 4.7 8 2 3 1 Pin Mark 1 2 3 4 5 6 7 8 Vt GND VDD OUT GND GND GND GND 3.35 1.55 4 1.7 7 1 (2.0 max.) 7.8 5 6.05 6.0 6 RECOMMENDED LAND PATTERN 1.1 1.7 2.3 Units:mm 41 Voltage Control Oscillator TAPE DIMENSIONS Specifications Part No. Tape width, guide pitch Diameter of Reel Unit O 330 2000pcs O 330 2000pcs O 330 2000pcs O 330 2000pcs 16 4 VK-120 12 16 4 EK-304 1.5 YK-501 1 Pin mark 16.0 2 7.5 4 1.75 12 0.3 12 2.2 16 2 RK-405 12 REEL DIMENSIONS 190.4 O 13.00.2 R1.0 +1 O 21 - 0 Diameter of reel W=Tape width +0.4 (Inner dimension) Material: Plastic conductive reel 2.0 42 KXO-01 Series Crystal Clock Oscillators TTL Drive - TTL Compatible O: 8.0 to 50 MHz FEATURES HOW TO ORDER 1) Lower Cost 2) 14 pin DIP compatible 3) Wide frequency range (8MHz - 50MHz) 4) All metal package minimizes RF radiation 5) Meets FCC EMI specifications 6) Solder coated pins 7) 25 pieces per tube 8) Sold in increments of 100 pieces KXO-01 - 1 - 32.0000M T 1 2 3 4 1 2 3 4 Type: (Kyocera Crystal Oscillators) Frequency precision: 0 = 50ppm (special) 1 = 100ppm Frequency Packaging: T = Tube SPECIFICATIONS (KXO-01) Parameters Output Frequency Code Rating Unit fout 8 to 50 MHz 0:50 ppm 0 to 70C 1100 ppm 4.5V to 5.5V f/fo Frequency Precision Aging Rate f/f 5 ppm/y Operating Temperature Range Topr 0 to 70 C -55 to +125 C Storage Temperature Range Remarks Voltage VDD 50.5 VDC Electrical Current Consumption IDD 35 max mA Duty Ratio Sy 40 to 60 % 1.4V DC level "0" Level VOL 0.4 max V At IOL=16mA "1" Level VOH 2.4 min V At IOH=400A 15 max nsec 8 to 32MHz 10 max nsec 32.1 to 50MHz 1 to 10 TTL Output Rise and Fall Time TR, TF Fan Out DIMENSIONS #1 13 max. (.512) 11 max. (.433) 19 max. (.748) 21 max. (.827) #7 4.580.5 (.180.02) #14 5.08 (.200) 7.620.3 (.300.01) 12.20.5 (.480.02) 15.240.3 (.600.01) 6.350.5 (.250.02) 0.8 (.031) #8 4 - o0.45 (.018) Units: mm (inch) 43 KXO-01 Series Crystal Clock Oscillators TTL Drive - TTL Compatible O: 8.0 to 50 MHz MARKING PIN CONNECTION PIN # FUNCTION 1 N.C. 7 Case /GND 8 Output 14 +5.0V D.C. MFG. ID PART NUMBER OUTPUT FREQUENCY COUNTRY OF ORIGIN KXO-01-1 40.0000MHz 9801 JAPAN DATE CODE DOT (INDICATING PIN 1) POPULAR FREQUENCY LIST 8.0000MHz 16.0000MHz 25.0000MHz 10.0000MHz 19.6608MHz 32.0000MHz 12.0000MHz 20.0000MHz 40.0000MHz 14.31818MHz 24.0000MHz 50.0000MHz SHAPE OF OUTPUT WAVE TEST CIRCUIT 5.0V TR TF TP 14 A 400 H 2.4V 8 1.4V KXO-01 CL VDD V 1 0.1F 7 15pF 0.4V L A CL=15pF max (Inclusive of test jig and probe capacitance) Duty Ratio= 44 B A X100 A+B KXO-HC/KHO-HC Series Crystal Clock Oscillators HCMOS Drive - TTL or CMOS Compatible O: 1 to 72 MHz FEATURES HOW TO ORDER 1) High speed CMOS clock oscillator 2) High power drive level 3) Low current consumption 4) Output available with TTL or CMOS compatibility 5) Enable/disable option 6) KHO-HC: 8 pin DIP 7) KXO-HC: 14 pin DIP 8) KXO: 25 pieces per tube KHO: 40 pieces per tube 9) KXO: Sold in increments of 100 pieces KHO: Sold in increments of 120 pieces KXO-HC 1 -T S E - 32.0000M T 1 2 3 4 5 6 1 2 3 4 5 6 Type: KXO = 14 pin DIP; KHO = 8 pin DIP Frequency precision: S = 25ppm, 0 = 50ppm, 1 = 100ppm Output level/Duty cycle: TS = TTL compatible/45 to 55% CS = CMOS compatible/45 to 55% Enable/Disable function: = without function, E = with function Frequency Packaging: T = Tube SPECIFICATIONS: TTL COMPATIBLE (KXO-HC-T/KHO-HC-T) Parameters Output Frequency Code fOUT Frequency Precision f/f Operating Temperature Range Storage Temperature Voltage Electrical Current Consumption Duty Cycle Output "0" Level "1" Level Rise and Fall Time Fan Out Time to Enable/Disable Aging TP VDD - nsec A A V V ppm/yr 14 (8) 8 (5) KXO-HC (KHO-HC) KXO-HC-T/KHO-HC-T 5.0V Remarks 0 to 70C 4.5V to 5.5V f=50MHz, CL=15pF (10TTL load) 1.4V DC level At IOL=16mA At IOH=-1mA 0.4V to 2.4V, CL=15pF (10TTL load) CMOS level OK Tristate output MARKINGS KXO-HC MFG. ID TR TF 400 KXO-HC-T/KHO-HC-T 1 (1) >50 S:25 0:50 1:100 0 to +70 -55~+125 50.25 70 max 45 to 55 0.4 max 2.4 min 3.5 max TTL 10 gates 100 max 10 max -150 max 2.2 min 0.8 max 5 Unit MHz ppm ppm ppm C C V mA % V V nsec SHAPE OF OUTPUT WAVE TEST CIRCUIT V O IIH IIL VIH VIL f/f Input Voltage A 1 to 50 S:25 0:50 1:100 0 to +70 -55~+125 50.5 50 max 45 to 55 0.4 max 2.4 min 5.0 max TTL 10 gates 100 max 10 max -150 max 2.2 min 0.8 max 5 TOPR Tstr VDD IDD SY VOL VOH T R, T F Input Current + Rating H 2.4V KXO-HC-TSE 40.0000 MHz 9801 Japan 1.4V 7 (4) 0.1F CL 15pF 0.4V KHO-HC L A CL=15pF max (Inclusive of test jig and probe capacitance) PART NUMBER OUTPUT FREQUENCY COUNTRY OF ORIGIN DATE CODE DOT (INDICATING PIN 1) A Duty Ratio= A+B B X 100 HCI-TS 24.0000 9801 JPN MFG. ID PART NUMBER OUTPUT FREQUENCY COUNTRY OF ORIGIN DATE CODE DOT (INDICATING PIN 1) 45 KXO-HC/KHO-HC Series Crystal Clock Oscillators HCMOS Drive - TTL or CMOS Compatible O: 1 to 72 MHz SPECIFICATIONS: CMOS COMPATIBLE (KXO-HC-C/KHO-HC-C) Parameters Output Frequency Code fOUT Frequency Precision f/f Operating Temperature Range Storage Temperature Range Voltage Electrical Current Consumption TOPR Tstr VDD IDD Duty Cycle "0" Level Output "1" Level Rise and Fall Time Time to Enable Disable Rating IIH IIL VIH VIL f/f Input Voltage Aging TEST CIRCUIT >50 S:25 0:50 1:100 0 to +70 -55~+125 50.25 80 max 45 to 55 0.1 VDD max 0.9 VDD min 10 max 100 max 10 max -150 max 2.2 min 0.8 max 5 45 to 55 0.1 VDD max 0.9 VDD min 6 max 100 max 10 max -150 max 2.2 min 0.8 max 5 % V V nsec nsec A A V V ppm/yr O SY VOL VOH T R, T F Input Current 1 to 50 S:25 0:50 1:100 0 to +70 -55~+125 50.5 50 max Unit MHz ppm ppm ppm C C V mA SHAPE OF OUTPUT WAVE (KXO-HC-C/KHO-HC-C) A VDD TF 8 (5) 1 (1) V 7 (4) f=>50MHz, CL=15pF f=<50MHz, CL=50pF 1/2VDD level At IOL=16mA At IOH=-1mA 10% VDD to 90% VDD CL=50pF Tristate Output KXO KHO 1 1 N.C. or Control 7 4 Case /GND 0.9V 8 5 Output 0.5V 14 8 +5.0V D.C. TF TR H KXO-HC (KHO-HC) + 0 to 70C 4.5V to 5.5V PIN CONNECTION (KXO-HC-C/KHO-HC-C) T.P. 14 (8) Remarks CL 50pF 0.1V - 0.1F L A CL=50pF max (Inclusive of test jig and probe capacitance) B ENABLE/DISABLE FUNCTION CHART Duty Ratio= A X 100 A+B Pin 1 Pin 8 High or Open Oscillation Low High Impedance DIMENSIONS KXO-HC #1 KHO-HC #7 #1 19max. (.748) 21max. (.827) #14 12.20.5 (.4800.2) 15.240.3 (.6000.1) #8 4- o0.45 (.018) 5.08 (.200) 6.350.5 (.250.02) 10.8 (.425) #8 #4 0.8 (.031) 10.8 (.425) 0.8 (.031) 12.9 (.508) 7.620.3 (.3000.1) 4.580.5 (.1800.2) 11max. (.433) 13max. (.512) 12.9 (.508) 7.62 (.300) 5.08 (.200) 6.35 (.250) 4 - o0.55max. (.022) #5 Unit: mm (inch) 46 386 Series Clock Oscillators HCMOS Drive - CMOS Compatible O: 24, 32, 40, 50 MHz FEATURES HOW TO ORDER 1) Capable of driving the 80386 and surrounding LSI directly up to 150pF load 2) Replaces existing clock genarator and/or buffer 3) 45/55 symmetry for all standard frequencies even at 150pF load 4) Enable/disable function as standard 5) 25 pieces per tube 6) Sold in increments of 100 pieces 386-HC 1 - C S E - 40.0000M T 1 2 3 4 5 1 Type: 386 = 14 pin DIP 2 Frequency precision: 1 = 100ppm 3 Output level/Duty cycle CS = CMOS compatible/45 to 55% 4 Enable/disable function: = without function, E = with function 5 Frequency 6 Packaging: T = Tube 6 SPECIFICATIONS (386-HC) Parameters Code Rating Unit Output Frequency fOUT 24, 32, 40 50 MHz MHz CL=150pFmax CL=80pFmax Frequency Precision (Inclusive of Temp. Voltage variation) f/f 1:100 ppm Ta=0~70C f/f TOPR TSTR VDD ICC Sy VOL VOH T R, T F Aging Rate Operating Temperature Storage Temperature Range Supply Voltage Supply Current Duty Ratio Output "0" Level "1" Level Rise and Fall Time 5 0~+70 -55~+125 50.25 65 max 45~55 0.1VDD max 0.9VDD min See Clock Time Table 100 max 100 max 10 max -150 max 2.2 min 0.8 max 7 150 80 Enable/Disable Time IIH IIL VIH VIL Current Input Voltage Fan Out CL Load Capacitance DIMENSIONS Type E Tristate Output VDD= 5.25V VDD=5.25V f=12.0MHz~40MHz f=40.1MHz~50MHz 12.2 (.408) 13 (.512) 4.58 (.180) 6.35 (.25) PIN 14 7.62 (.300) PIN 7 7.5 (.28) 0.8 (.031) Cl=150pF, Ta=25C 1/2 VDD level IOL=12mA IOL=-1mA MARKINGS PIN 1 4 - o0.45 (.018) ppm/yr C C V mA % V V nsec nsec nsec A A V V TTL pF pF Remarks PIN 8 15.24 (.600) 21 (.828) MFG. ID 386-HC1-CSE PART NUMBER 32.0000 MHz 9601 Japan OUTPUT FREQUENCY COUNTRY OF ORIGIN DATE CODE DOT (INDICATING PIN 1) Unit: mm (inch) 47 386 Series Clock Oscillators HCMOS Drive - CMOS Compatible TEST CIRCUIT O: 24, 32, 40, 50 MHz PIN CONNECTION T.P. 14 8 386 Function 1 N.C. or Control 7 Case GND 8 Output 14 VDD A 386-HC1-CS VDD V 1 0.1F 7 CL 150pF or 80pF CL: 150pF max (Inclusive of test JIG and probe capacitance) CLOCK TIME TABLE (32MHz, 40MHz) Frequency 32MHz 12a 40MHz 12b Clock time (ns) Min Max Min Max Clock high time t2a 9 - 8 - VDD-0.8V Clock high time t2b 5 - 5 - 2.0V Clock low time t3a 9 - 8 - Clock low time t3b 7 - 6 - Clock tall time t4 - 7.5 - 8 Clock tall time t5 - 7.5 - 8 0.8V t5 14 t3b t3a CLOCK TIME TABLE (50MHz) Frequency Clock time(ns) 50MHz 12a Min Max Clock high time t2a 7 - Clock high time t2b 4 - Clock low time t3a 7 - Clock low time t3b 5 - Clock tall time t4 - 7 Clock tall time t5 - 7 12b 3.7V 2.0V 0.8V 48 t5 14 t3b t3a USA EUROPE ASIA-PACIFIC AVX Myrtle Beach, SC Corporate Offices AVX Limited, England European Headquarters AVX/Kyocera, Singapore Asia-Pacific Headquarters Tel: 843-448-9411 FAX: 843-448-1943 Tel: ++44 (0)1252 770000 FAX: ++44 (0)1252 770001 Tel: (65) 258-2833 FAX: (65) 350-4880 AVX Northwest, WA AVX S.A., France AVX/Kyocera, Hong Kong Tel: 360-699-8746 FAX: 360-699-8751 Tel: ++33 (1) 69.18.46.00 FAX: ++33 (1) 69.28.73.87 Tel: (852) 2-363-3303 FAX: (852) 2-765-8185 AVX North Central, IN AVX GmbH, Germany - AVX AVX/Kyocera, Korea Tel: 317-848-7153 FAX: 317-844-9314 Tel: ++49 (0) 8131 9004-0 FAX: ++49 (0) 8131 9004-44 Tel: (82) 2-785-6504 FAX: (82) 2-784-5411 AVX Northeast, MA AVX GmbH, Germany - Elco AVX/Kyocera, Taiwan Tel: 508-485-8114 FAX: 508-485-8471 Tel: ++49 (0) 2741 2990 FAX: ++49 (0) 2741 299133 Tel: (886) 2-2516-7010 FAX: (886) 2-2506-9774 AVX Mid-Pacific, CA AVX srl, Italy AVX/Kyocera, China Tel: 408-436-5400 FAX: 408-437-1500 Tel: ++39 (0)2 665 00116 FAX: ++39 (0)2 614 2576 Tel: (86) 21-6249-0314-16 FAX: (86) 21-6249-0313 AVX Southwest, AZ AVX sro, Czech Republic AVX, Malaysia Tel: 602-834-7919 FAX: 602-834-8078 Tel: ++420 (0)467 558340 FAX: ++420 (0)467 2844 Tel: (60) 4-228-1190 FAX: (60) 4-228-1196 AVX South Central, TX Elco, Japan Tel: 972-669-1223 FAX: 972-669-2090 Tel: 045-943-2906 FAX: 045-943-2910 Kyocera, Japan AVX Southeast, NC Tel: (81) 75-593-4518 FAX: (81) 75-502-2705 Tel: 919-878-6357 FAX: 919-878-6462 AVX Canada Contact: Tel: 905-564-8959 FAX: 905-564-9728 http://www.avxcorp.com AP-TD30M398-C