Surface Mount Rectifiers, 1 A, 400 V - 600 V S1GHE, S1JHE Features * * * * * * * * Low Profile Package with < 0.75 mm Package Height High Efficiency Moisture Sensitivity Level 1 per J-STD-020 Glass Passivated Chip Junction UL Flammability 94V-0 Classification Green Mold Compound NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free and are RoHS Compliant www.onsemi.com 1 Cathode 2 Anode Rectifier 2 1 Specifications ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise noted) Value Symbol Parameter S1GHE S1JHE Unit 400 600 V VRRM Maximum Repetitive Peak Reverse Voltage IF(AV) Maximum Average Forward Rectified Current 1 Peak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load 20 IFSM TJ TSTG SOD-323EP CASE 477AD A MARKING DIAGRAM A &Y &Z**&G Operating Junction Temperature Range -55 to +175 Storage Temperature Range -55 to +175 C Band Indicates Cathode C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. &Y &Z ** &G = Binary Calendar Year Coding Scheme = Assembly Plant Code = Specific Device Code - (A5, A7) = Single Digit Weekly Data Code ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. (c) Semiconductor Components Industries, LLC, 2020 April, 2020 - Rev. 1 1 Publication Order Number: S1JHE/D S1GHE, S1JHE THERMAL CHARACTERISTICS (TA = 25C unless otherwise noted) (Note 1) Symbol Value Unit JL Junction to Lead Thermal Resistance Thermocouple Soldered to Cathode Characteristic 26.5 C/W RqJA Junction to Ambient Thermal Resistance 200 C/W 1. Per JESD51-3 Recommended Thermal Test Board. Device mounted on FR-4 PCB, board size = 76.2 mm x 114.3 mm. ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol Parameter Conditions Min Typ Max Unit VF Instantaneous Forward Voltage (Note 2) IF = 1 A 0.96 1.1 V IR Reverse Current at Rated VR TJ = 25C 0.02 1 mA Trr Reverse Recovery Time TJ = 125C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 10.35 50 CJ Junction Capacitance VR = 4.0 V, f = 1 MHz 782 ns 3 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse test with PW = 300 ms, 1% duty cycle. ORDERING INFORMATION Part Number Top Mark Package Shipping S1GHE A5 SOD-323EP (Pb-Free/Halogen Free) 3000 / Tape & Reel A7 SOD-323EP (Pb-Free/Halogen Free) 3000 / Tape & Reel NRVS1GHE S1JHE NRVS1JHE For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 2 S1GHE, S1JHE TYPICAL PERFORMANCE CHARACTERISTICS PEAK FORWARD SURGE URRENT(A) AVERAGE FORWARD CURRENT (A) 1.2 1 0.8 0.6 0.4 RESISTIVE OR INDUCTIVE LOAD 0.2 0 0 25 50 75 100 125 150 100 8.3ms Single Half Sine Wave 10 1 1 10 175 100 NUMBER OF CYCLES AT 60 Hz LEAD TEMPERATURE (C) Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Forward Surge Current 1000 10 IR - LEAKAGE CURRENT (mA) IF - FORWARD CURRENT (A) o o TA = 175 C 1 o TA = 150 C o TA = 125 C 0.1 o TA = 25 C TA = 175 C o o o TA = 150 C TA = 75 C TA = 125 C 100 10 1 0.1 0.01 0.001 o TA = -40 C 1E-4 o o TA = -55 C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 VF - FORWARD VOLTAGE (V) 40 o o TA = 25 C 1E-5 20 TA = -55 C TA = -40 C 60 80 100 PERCENT OF RATED REVERSE VOLTAGE (%) Figure 3. Typical Forward Characteristics Figure 4. Typical Reverse Characteristics CJ - JUNCTION CAPACITANCE (pF) 100 10 1 0.1 0.1 1 10 100 1000 VR - REVERSE BIAS VOLTAGE (V) Figure 5. Typical junction Capacitance Figure 6. Reverse Recovery Time Characteristics and Test Circuit Diagram www.onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOD-323EP CASE 477AD ISSUE O DATE 31 AUG 2016 2.30 1.75 0.50 1.40 1.15 1.10 1.00 2.00 TOP VIEW 0.80 LAND PATTERN RECOMMENDATION 0.75 0.55 2.70 2.30 FRONT VIEW 1.55 1.10 0.80 0.40 0.95 0.65 0.20 0.10 NOTES: A. THIS PACKAGE DOES NOT CONFORM TO ANY STANDARDS. B. ALL DIMENSIONS ARE IN MILLIMETERS. 0.85 C. DIMENSIONS ARE EXCLUSIVE OF BURRS, 0.45 MOLD FLASH AND TIE BAR PROTRUSIONS. BOTTOM VIEW DOCUMENT NUMBER: DESCRIPTION: 98AON13727G SOD-323EP Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2019 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative