© Semiconductor Components Industries, LLC, 2020
April, 2020 − Rev. 1 1Publication Order Number:
S1JHE/D
Surface Mount Rectifiers,
1 A, 400 V - 600 V
S1GHE, S1JHE
Features
Low Profile Package with < 0.75 mm Package Height
High Efficiency
Moisture Sensitivity Level 1 per J−STD−020
Glass Passivated Chip Junction
UL Flammability 94V−0 Classification
Green Mold Compound
NRV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements;
AEC−Q101 Qualified and PPAP Capable
These Devices are Pb−Free and are RoHS Compliant
Specifications
ABSOLUTE MAXIMUM RATINGS (T
A
= 25
°
C unless otherwise noted)
Symbo
l
Parameter
Value
Unit
S1GHE
S1JHE
V
RRM
Maximum Repetitive Peak
Reverse Voltage
400
600
V
I
F(AV)
Maximum Average Forward
Rectified Current
1
A
I
FSM
Peak Forward Surge Current,
8.3 ms Single Half Sine−Wave
Superimposed on Rated Load
20
A
T
J
Operating Junction
Temperature Range
−55 to +175
°
C
T
STG
Storage Temperature Range
−55 to +175
°
C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be af fected.
SOD−323EP
CASE 477AD
www.onsemi.com
MARKING DIAGRAM
&Y = Binary Calendar Year Coding Scheme
&Z = Assembly Plant Code
** = Specific Device Code − (A5, A7)
&G = Single Digit Weekly Data Code
Band Indicates Cathode
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 o
f
this data sheet.
12
&Y
&Z**&G
1
2
Rectifier
Cathode Anode
S1GHE, S1JHE
www.onsemi.com
2
THERMAL CHARACTERISTICS (T
A
= 25
°
C unless otherwise noted) (Note 1)
Characteristic
Value
Unit
ΨJL
Junction to Lead Thermal Resistance Thermocouple Soldered to Cathode
26.5
°
C/W
qJA
Junction to Ambient Thermal Resistance
200
°
C/W
1. Per JESD51−3 Recommended Thermal Test Board. Device mounted on FR−4 PCB, board size = 76.2 mm x 114.3 mm.
ELECTRICAL CHARACTERISTICS (T
A
= 25
°
C unless otherwise noted)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
V
F
Instantaneous Forward Voltage (Note 2)
I
F
= 1 A
0.96
1.1
V
IRReverse Current at Rated VR
T
J
= 25
°
C
0.02
1
mA
T
J
= 125
°
C
10.35
50
T
rr
Reverse Recovery Time
I
F
= 0.5 A, I
R
= 1.0 A, I
rr
= 0.25 A
782
ns
C
J
Junction Capacitance
V
R
= 4.0 V, f = 1 MHz
3
pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse test with PW = 300 ms, 1% duty cycle.
ORDERING INFORMATION
Part Number
Top Mark
Package
Shipping
S1GHE
A5 SOD−323EP
(Pb−Free/Halogen Free
)
3000 / Tape & Reel
NRVS1GHE
S1JHE
A7 SOD−323EP
(Pb−Free/Halogen Free
)
3000 / Tape & Reel
NRVS1JHE
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
S1GHE, S1JHE
www.onsemi.com
3
TYPICAL PERFORMANCE CHARACTERISTICS
Figure 1. Forward Current Derating Curve Figure 2. Maximum Non−Repetitive Forward
Surge Current
Figure 3. Typical Forward Characteristics Figure 4. Typical Reverse Characteristics
0
0.2
0.4
0.6
0.8
1
1.2
0
AVERAGE FORWARD CURRENT (A)
LEAD TEMPERATURE (°C)
RESISTIVE OR
INDUCTIVE LOAD
25 50 75 100 125 150 175
1
10
100
1
PEAK FORWARD SURGE URRENT(A)
NUMBER OF CYCLES AT 60 Hz
8.3ms Single Half Sine Wave
10 100
20 40 60 80 100
1E−5
1E−4
0.001
0.01
0.1
1
10
100
1000 TA = 150oC
TA = −40
oC
TA = 75oC
TA = 125oC
TA = 175oC
TA = 25oCTA = −55
oC
IR − LEAKAGE CURRENT (mA)
PERCENT OF RATED REVERSE VOLTAGE (%)
0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.01
0.1
1
10
TA = 175oC
TA = 150oC
TA = 125oC
TA = −55oC
TA = −40
oC
TA = 25oC
IF − FOR WARD CURRENT (A)
VF − FORWARD VOLTAGE (V)
Figure 5. Typical junction Capacitance Figure 6. Reverse Recovery Time Characteristics
and Test Circuit Diagram
0.1 1 10 100 1000
0.1
1
10
100
CJ − JUNCTION CAPACITANCE (pF)
VR − REVERSE BIAS VOLTAGE (V)
SOD323EP
CASE 477AD
ISSUE O
DATE 31 AUG 2016
0.50
0.80
1.10 1.00
2.00
1.40
1.15
2.30
1.75
0.20
0.10
2.70
2.30
0.75
0.55
0.85
0.45
0.95
0.65
1.55
1.10 0.80
0.40
NOTES:
A. THIS PACKAGE DOES NOT CONFORM TO
ANY STANDARDS.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
LAND PATTERN RECOMMENDATION
TOP VIEW
FRONT VIEW
BOTTOM VIEW
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
98AON13727G
DOCUMENT NUMBER:
DESCRIPTION:
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
SOD323EP
© Semiconductor Components Industries, LLC, 2019 www.onsemi.com
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 8002829855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative