ATS01N103FT Product data sheet Characteristics soft starter for asynchronous motor - ATS01 - 3 A - 110..480V - 0.55..1.1 KW Range of product Altistart 01 Product or component type Soft starter Product destination Asynchronous motors Product specific application Simple machine Device short name ATS01 Network number of phases 1 phase [Us] rated supply voltage 110...480 V - 10...10 % Motor power kW 0.37kW, 3 phases at 230 V 0.55kW, 3 phases at 230 V 1.1kW, 3 phases at 400 V 0.37kW, 1 phase at 230 V Motor power hp 0.5hp, 3 phases at 230 V 0.5hp, 3 phases at 460 V 1.5hp, 3 phases at 460 V IcL starter rating 3A Utilisation category AC-53B conforming to EN/IEC 60947-4-2 Current consumption 15 A at nominal load Type of start Start with voltage ramp Power dissipation in W 19W in transient state 4W at full load and at end of starting Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Main Complementary Assembly style With heat sink Function available Integrated bypass Supply voltage limits 99...528V Supply frequency 50...60 Hz - 5...5 % Network frequency 47.5...63 Hz Output voltage <= power supply voltage [Uc] control circuit voltage 110 V AC +/- 10 % at 30 mA 24 V AC/DC +/- 10 % at 25 mA 240 V AC +/- 10 % at 65 mA Starting time 1 s / 100 5 s / 20 Mar 16, 2021 1 Adjustable from 1 to 5 s Starting torque 30...80 % of starting torque of motor connected directly on the line supply Discrete output current 2 A DC-13 3 A AC-15 Tightening torque 0.8N.m Electrical connection Cage type connector - rigid 1 2.5 mm AWG 14 control circuit Cage type connector - rigid 1 2.5 mm AWG 14 power circuit Cage type connector - rigid 2 1 mm AWG 17 control circuit Cage type connector - rigid 2 1 mm AWG 17 power circuit Cage type connector - flexible with cable end 1 2.5 mm AWG 14 control circuit Cage type connector - flexible with cable end 1 2.5 mm AWG 14 power circuit Cage type connector - flexible without cable end 1 2.5 mm AWG 14 control circuit Cage type connector - flexible without cable end 1 2.5 mm AWG 14 power circuit Cage type connector - flexible with cable end 2 0.75 mm AWG 18 control circuit Cage type connector - flexible with cable end 2 0.75 mm AWG 18 power circuit Cage type connector - flexible without cable end 2 1 mm AWG 17 control circuit Cage type connector - flexible without cable end 2 1 mm AWG 17 power circuit Marking CE Operating position Vertical +/- 10 degree Height 100mm Width 23mm Depth 100mm Net weight 0.16kg Compatibility code ATS01N1 Motor power range AC-3 0...0.5kW at 200...240V 1 phase 0...0.5kW at 200...240V 3 phases 0.55...1kW at 200...240V 3 phases 1.1...2kW at 380...440V 3 phases Motor starter type Soft starter Environment Electromagnetic compatibility Conducted and radiated emissions level B conforming to CISPR 11 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity conforming to EN 50082-2 Harmonics conforming to IEC 1000-3-2 Harmonics conforming to IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 Voltage/current impulse level 3 conforming to IEC 61000-4-5 Standards EN/IEC 60947-4-2 Product certifications CSA GOST C-Tick UL CCC B44.1-96/ASME A17.5 for starter wired to the motor delta terminal IP degree of protection IP20 Pollution degree 2 conforming to EN/IEC 60947-4-2 Vibration resistance 1 gn (f= 13...150Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3...13Hz) conforming to EN/IEC 60068-2-6 Shock resistance 15 gn for 11ms conforming to EN/IEC 60068-2-27 Relative humidity 5...95% without condensation or dripping water conforming to EN/IEC 60068-2-3 Ambient air temperature for operation -10...40C (without derating) 40...50C (with current derating of 2 % per C) Ambient air temperature for storage -25...70C conforming to EN/IEC 60947-4-2 Operating altitude <= 1000 m without derating > 1000 m with current derating of 2.2 % per additional 100 m 2 Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Weight 175g Package 1 Height 2.5cm Package 1 width 10.3cm Package 1 Length 10.5cm Unit Type of Package 2 S02 Number of Units in Package 2 36 Package 2 Weight 6.491kg Package 2 Height 15cm Package 2 width 30cm Package 2 Length 40cm Offer Sustainability REACh Regulation REACh Declaration REACh free of SVHC Yes EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Toxic heavy metal free Yes Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Circularity Profile End of Life Information WEEE The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty 18 months 3 Product data sheet Dimensions Drawings ATS01N103FT Dimensions Mounting on Symetrical (35 mm) Rail or Asymetrical Rail with Adaptor RHZ 66 4 Product data sheet Connections and Schema ATS01N103FT Example of 3-phase Power Supply Connection (1) A1 : Q1 : KM1 : F1, F2 : S1, S2 : A line contactor must be used in the sequence. Soft starter Motor circuit-breaker Contactors Control protection fuses Pushbuttons 5 Product data sheet Technical Description Function Diagram Us : Uc : LED 1 : LED 2 : Um : 6 Power supply voltage Control supply voltage Green LED Yellow LED Motor voltage ATS01N103FT