VS-2KBB Series
www.vishay.com Vishay Semiconductors
Revision: 14-Sep-17 1Document Number: 93561
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Single Phase Rectifier Bridge, 1.9 A
FEATURES
• Suitable for printed circuit board mounting
• Leads on standard 2.54 mm (0.1") grid
• Compact construction
• High surge current capability
• Polarized package
• Equivalent to standard DIN parts
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
A 1.9 A single phase diode bridge rectifier assembly
consisting of four silicon diodes in a plastic encapsulation,
intended for general applications in industrial and consumer
equipment.
ELECTRICAL SPECIFICATIONS
Note
• For PIN configuration - ~ ~ + add “R” to end of part number, e.g. 2KBB05R (see also dimensions for details - link at the end of datasheet)
PRIMARY CHARACTERISTICS
IO1.9 A
VRRM 50 V to 1000 V
Package 2KBB
Circuit configuration Single phase bridge
2KBB
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
IO
1.9 A
TC45 °C
IFSM
50 Hz 50 A
60 Hz 52
I2t50 Hz 17.7 A2s
60 Hz 16.1
VRRM 100 to 1000 V
TJ-40 to 150 °C
VOLTAGE RATINGS AND APPLICATION DATA
CROSS REFERENCE VRRM, VRSM
MAXIMUM PEAK
REVERSE VOLTAGE
TJ = 15 °C
(V)
IRM
TYPICAL PEAK REVERSE
CURRENT PER DIODE
AT RATED VRRM
(μA)
APPLICATION DATA (SEE FIGURE 3)
PART
NUMBER DIN CODE
VRMS MAXIMUM
RECOMMENDE
D AC SUPPLY
VOLTAGE
(V)
CMAX
MAXIMUM
LOAD
CAPACITANCE
(μF)
RMIN
MINIMUM
SOURCE
RESISTANCE
()TJ = 25 °C TJ = 150 °C
VS-2KBB05 B20C1500 50 10 500 20 7000 0.3
VS-2KBB10 B40C1500 100 10 500 40 5000 0.5
VS-2KBB20 B80C1500 200 10 500 80 3300 0.8
VS-2KBB40 B125C1500 400 10 500 125 1600 1.5
VS-2KBB60 B250C1500 600 10 500 250 1200 2.5
VS-2KBB80 B380C1500 800 10 500 380 800 3.0
VS-2KBB100 B500C1500 1000 10 500 500 600 5.0
VS-2KBB Series
www.vishay.com Vishay Semiconductors
Revision: 14-Sep-17 2Document Number: 93561
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) I2t for time tx = I2t x tx
Fig. 1 - Average (DC) Output Current vs.
Maximum Allowable Ambient Temperature
Fig. 2 - Maximum Non-Repetitive Surge Current vs.
Pulse Train Duration (f = 50 Hz)
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum DC output current IO
TC = 45 °C, resistive and inductive load 1.9 A
TC = 45 °C, capacitive load 1.5
Maximum peak one cycle,
non-repetitive surge current IFSM
t = 6 ms Following any rated load
condition, and with rated VRRM
applied following surge
50
A
t = 5 ms 52
Maximum I2t for fusing,
initial TJ = TJ maximum I2t
t = 10 ms Rated VRRM applied following
surge, initial
TJ = 150 °C
12.5
A2s
t = 8.3 ms 11.3
t = 10 ms 17.7
t = 8.3 ms 16.1
Maximum I2t capability for fusing I2t (1) t = 0.1 to 10 ms, VRRM following surge = 0 177 A2s
Maximum peak forward voltage per diode VFM IO = 1.9 A (3.0 Apk)1.1V
Operating frequency range f 40 to 2000 Hz
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL VALUES UNITS
Operating junction and storage temperature range TJ, TStg -40 to 150 °C
Approximate weight 4g
0.14 oz.
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
0
0 20 40 60 80 100 120 140 160
Average Output Current (A)
Maximum Allowable Ambient Temperature (°C)
Capacitive load
Resistive, inductive load
Maximum Peak Output Current (A)
Equal Amplitude Pulse Train Duration (s)
50
40
30
20
10
0
10-2 10-1 110
60
VS-2KBB Series
www.vishay.com Vishay Semiconductors
Revision: 14-Sep-17 3Document Number: 93561
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Minimum Required Source Resistance vs.
RMS Supply Voltage and Load Capacitance
Fig. 4 - Maximum Switch-On Surge Current vs.
Surge Duration
CIRCUIT CONFIGURATION
RMS Supply Voltage (V)
Minimum Required Value of Source Resistance (Ω)
500
400
300
200
100
0
0123456
600 CL = 200 µF CL = 400 µF
CL = 600 µF
CL = 800 µF
CL = 1200 µF CL = 1600 µF
CL = 3300 µF CL = 5000 µF
CL = 7000 µF
0.5
1
2
5
10
10-1 10 102103
1
Average Output Current (A)
Switch-On Surge Duration (s)
Resistive, inductive load
Capacitive load
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95328
(+)
AC
AC
(-)
Document Number: 95328 For technical questions, contact: indmodules@vishay.com www.vishay.com
Revision: 04-Jul-08 1
2KBB
Outline Dimensions
Vishay Semiconductors
DIMENSIONS in millimeters (inches)
Note
• For PIN configuration - ~ ~ + add “R” to end of part number
-~ ~+
Ø 0.9 (0.035)
Ø 0.7 (0.028) (TYP.)
Ø 5.10 (0.201)
Ø 4.30 (0.169)
(TYP.)
7.00 (0.276)
6.00 (0.236)
20.00 (0.787)
15.50 (0.610)
14.50 (0.570)
18.00 (0.709)
17.00 (0.669)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
