Automation Controls Catalog PP/RZSUROH )RUP&DQG$VXUIDFH PRXQWW\SH UHOD\V TQ RELAYS FEATURES )ODWFRPSDFWVL]H 14.0 (L)x9.0 (W)x5.0 (H) mm .551 (L)x.354 (W)x.197 (H) inch 1RPLQDORSHUDWLQJSRZHU +LJKVHQVLWLYLW\RIP:)RUP &VLQJOHVLGHVWDEOHW\SH 2XWVWDQGLQJVXUJHUHVLVWDQFH )&&3DUW 9iV RSHQFRQWDFWV 6XUIDFHPRXQWW\SHPHHW7HOFRUGLD 7HOFRUGLD 9iV FRQWDFWDQGFRLO ',/WHUPLQDODUUD\HQDEOHVXVHRI,& VRFNHWV /RZWKHUPDOHOHFWURPRWLYHIRUFH DSSUR[9 >DSSUR[9VXUIDFHPRXQWW\SH @ /DWFKLQJW\SHVDOVRDYDLODEOH 6HOIFOLQFKLQJWHUPLQDODOVR DYDLODEOH 8. $UDQJHRIVXUIDFHPRXQWW\SHVLV DOVRDYDLODEOH 6$/RZSUROHVXUIDFHPRXQW terminal type SL: High connection reliability VXUIDFHPRXQWWHUPLQDOW\SH 666SDFHVDYLQJVXUIDFHPRXQW terminal type 9. 0%%FRQWDFWW\SHVDYDLODEOH TYPICAL APPLICATIONS 1. 2. 3. 5. 7HOHSKRQHUHODWHGHTXLSPHQW &RPPXQLFDWLRQV 0HDVXUHPHQWHTXLSPHQW 2$HTXLSPHQW ,QGXVWULDOPDFKLQHV ORDERING INFORMATION TQ 2 Contact arrangement 2: 2 Form C Terminal shape Nil: Standard PC board terminal H: Self-clinching terminal SA: SA type SL: SL type SS: SS type Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching MBB function Nil: Standard (B.B.M.) type 2M: 2M.B.B. type Nominal coil voltage (DC)*1,2 1.5 (SMD only), 3, 4.5, 5, 6, 9, 12, 24, 48V Packing style*3 Nil: Tube packing X: Tape and reel (picked from 1/2/3/4/5-pin side) W: Tape and reel packing (picked from the 1/2/3/4/5-pin side) With humidity indicator and silica gel in moisture proof bag Z: Tape and reel packing (picked from the 6/7/8/9/10-pin side) Y: Tape and reel packing (picked from the 6/7/8/9/10-pin side) With humidity indicator and silica gel in moisture proof bag Note 1) *48 V coil type: Single side stable only Note 2) In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay. Note 3) The "W" and "Y" at the end of the part number is only available for SA and SS. industrial.panasonic.com/ac/e/ (c) Panasonic Corporation 2019 ASCTB14E TQ TYPES 6WDQGDUG3&ERDUGWHUPLQDODQGVHOIFOLQFKLQJWHUPLQDO 6WDQGDUG%%0 W\SH 1) Standard PC board terminal Contact arrangement Nominal coil voltage 2 Form C 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC 48 V DC Single side stable Part No. TQ2-3V TQ2-4.5V TQ2-5V TQ2-6V TQ2-9V TQ2-12V TQ2-24V TQ2-48V 1 coil latching Part No. TQ2-L-3V TQ2-L-4.5V TQ2-L-5V TQ2-L-6V TQ2-L-9V TQ2-L-12V TQ2-L-24V -- 2 coil latching Part No. TQ2-L2-3V TQ2-L2-4.5V TQ2-L2-5V TQ2-L2-6V TQ2-L2-9V TQ2-L2-12V TQ2-L2-24V -- 1 coil latching Part No. TQ2H-L-3V TQ2H-L-4.5V TQ2H-L-5V TQ2H-L-6V TQ2H-L-9V TQ2H-L-12V TQ2H-L-24V -- 2 coil latching Part No. TQ2H-L2-3V TQ2H-L2-4.5V TQ2H-L2-5V TQ2H-L2-6V TQ2H-L2-9V TQ2H-L2-12V TQ2H-L2-24V -- 6WDQGDUGSDFNLQJ)RUP& 7XEHSFV&DVHSFV 2. Self-clinching terminal Contact arrangement Nominal coil voltage 2 Form C 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC 48 V DC Single side stable Part No. TQ2H-3V TQ2H-4.5V TQ2H-5V TQ2H-6V TQ2H-9V TQ2H-12V TQ2H-24V TQ2H-48V 1RWH7\SHVWRWKHHQGRISDUW1R GHVLJQHGWRZLWKVWDQGVWURQJYLEUDWLRQFDXVHGIRUH[DPSOHE\WKHXVHRIWHUPLQDOFXWWHUVFDQDOVREHRUGHUHG +RZHYHUSOHDVHFRQWDFWXVLI\RXQHHGSDUWVIRUXVHLQORZOHYHOORDG 0%%W\SH 1) Standard PC board terminal Contact arrangement Nominal coil voltage 2 Form C 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC Single side stable Part No. TQ2-2M-3V TQ2-2M-4.5V TQ2-2M-5V TQ2-2M-6V TQ2-2M-9V TQ2-2M-12V TQ2-2M-24V 6WDQGDUGSDFNLQJ7XEHSFV&DVHSFV 2) Self-clinching terminal Contact arrangement Nominal coil voltage 2 Form C 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC Single side stable Part No. TQ2H-2M-3V TQ2H-2M-4.5V TQ2H-2M-5V TQ2H-2M-6V TQ2H-2M-9V TQ2H-2M-12V TQ2H-2M-24V 6WDQGDUGSDFNLQJ7XEHSFV&DVHSFV 1RWHV/DWFKLQJW\SHVDUHDYDLODEOHE\UHTXHVW3OHDVHFRQVXOWXVIRUGHWDLOV 8/&6$DSSURYHG8/OH1R(&6$OH1R/5 7\SHVWRWKHHQGRISDUW1R GHVLJQHGWRZLWKVWDQGVWURQJYLEUDWLRQFDXVHGIRUH[DPSOHE\WKHXVHRIWHUPLQDOFXWWHUVFDQDOVREHRUGHUHG +RZHYHUSOHDVHFRQWDFWXVLI\RXQHHGSDUWVIRUXVHLQORZOHYHOORDGDQGORZWKHUPDOSRZHU Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ (c) Panasonic Corporation 2019 ASCTB14E TQ 6XUIDFHPRXQWWHUPLQDO 7XEHSDFNLQJ Contact arrangement Nominal coil voltage 2c 1.5 V DC 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC 48 V DC Single side stable Part No. 7469 7469 7469 7469 7469 7469 7469 7469 7469 1 coil latching Part No. 746/9 746/9 746/9 746/9 746/9 746/9 746/9 746/9 -- 2 coil latching Part No. 746/9 746/9 746/9 746/9 746/9 746/9 746/9 746/9 -- )RUHDFKVXUIDFHPRXQWHGWHUPLQDOLGHQWLFDWLRQLQSXWWKHIROORZLQJOHWWHU6$W\SHA, SS type: S 6WDQGDUGSDFNLQJ7XEHSFV&DVHSFV 2) Tape and reel packing Contact arrangement Nominal coil voltage 2 Form C 1.5 V DC 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC 48 V DC Single side stable Part No. 7469= 7469= 7469= 7469= 7469= 7469= 7469= 7469= 7469= 1 coil latching Part No. 746/9= 746/9= 746/9= 746/9= 746/9= 746/9= 746/9= 746/9= -- 2 coil latching Part No. 746/9= 746/9= 746/9= 746/9= 746/9= 746/9= 746/9= 746/9= -- )RUHDFKVXUIDFHPRXQWHGWHUPLQDOLGHQWLFDWLRQLQSXWWKHIROORZLQJOHWWHU6$W\SHA, SS type: S 6WDQGDUGSDFNLQJ7DSHDQGUHHOSFV&DVHSFV Notes: 1. Tape and reel packing symbol "-Z" is not marked on the relay. "X" type tape and reel packing (picked from 1/2/3/4-pin side) is also available. 2. Tape and reel packing symbol "-Y" is not marked on the relay. "W" type tape and reel packing (picked from 1/2/3/4-pin side) is also available. 3OHDVHDGGWRWKHHQGRIWKHSDUWQXPEHUIRU$J3GFRQWDFWVORZOHYHOORDG RATING 6WDQGDUG3&ERDUGWHUPLQDODQGVHOIFOLQFKLQJWHUPLQDO &RLOGDWD 2SHUDWLQJFKDUDFWHULVWLFVVXFKDV2SHUDWHYROWDJHDQG5HOHDVHYROWDJHDUHLQAXHQFHGE\PRXQWLQJFRQGLWLRQVDPELHQW WHPSHUDWXUHHWF 7KHUHIRUHSOHDVHXVHWKHUHOD\ZLWKLQRIUDWHGFRLOYROWDJH ,QLWLDOPHDQVWKHFRQGLWLRQRISURGXFWVDWWKHWLPHRIGHOLYHU\ >6WDQGDUG%%0 W\SH@ 1) Single side stable (2 Form C) Nominal coil voltage 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 3LFNXSYROWDJH (at 20C 68F) 75%V or less of nominal voltage* (Initial) 'URSRXWYROWDJH (at 20C 68F) Nominal operating FXUUHQW [10%] (at 20C 68F) 10%V or more of nominal voltage* (Initial) Coil resistance [10%] (at 20C 68F) Nominal operating power 46.7 mA 31.1 mA 28.1 mA 23.3 mA 15.5 mA 11.7 mA 140 mW 0D[DSSOLHGYROWDJH (at 20C 68F) 150%V of nominal voltage 24 V DC 8.3 mA 200 mW 48 V DC 6.25 mA 300 mW Coil resistance [10%] (at 20C 68F) Nominal operating power 0D[DSSOLHGYROWDJH (at 20C 68F) 100 mW 150%V of nominal voltage 120%V of nominal voltage 2) 1 coil latching (2 Form C) Nominal coil voltage 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC Set voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Reset voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Nominal operating FXUUHQW [10%] (at 20C 68F) 33.3 mA 22.2 mA 20 mA 16.7 mA 11.1 mA 8.3 mA 6.3 mA 202.5 1,440 150 mW Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ (c) Panasonic Corporation 2019 ASCTB14E TQ 3) 2 coil latching (2 Form C) Nominal coil voltage 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 Set voltage (at 20C 68F) Reset voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) 75%V or less of nominal voltage* (Initial) V DC Nominal operating FXUUHQW [10%] (at 20C 68F) Set coil Reset coil 66.7 mA 66.7 mA 44.4 mA 44.4 mA 40 mA 40 mA 33.3 mA 33.3 mA 22.2 mA 22.2 mA 16.7 mA 16.7 mA 12.5 mA 12.5 mA Coil resistance [10%] (at 20C 68F) Set coil 45 101.2 125 180 405 720 Reset coil 45 101.2 125 180 405 720 1,920 1,920 Nominal operating power 0D[DSSOLHGYROWDJH (at 20C 68F) Set coil Reset coil 200 mW 200 mW 150%V of nominal voltage 300 mW 300 mW 120%V of nominal voltage >0%%W\SH@ Nominal coil voltage 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC 3LFNXSYROWDJH (at 20C 68F) 'URSRXWYROWDJH (at 20C 68F) 80%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) Nominal operating FXUUHQW [10%] (at 20C 68F) 66.7 mA 44.4 mA 40 mA 33.3 mA 22.2 mA 16.7 mA 8.3 mA Coil resistance [10%] (at 20C 68F) Nominal operating power 0D[DSSOLHGYROWDJH (at 20C 68F) 200 mW 150%V of nominal voltage 3XOVHGULYH-,6& 6SHFLFDWLRQV Characteristics Contact Rating Item Arrangement ,QLWLDOFRQWDFWUHVLVWDQFHPD[ Contact material Nominal switching capacity 0D[VZLWFKLQJSRZHU 0D[VZLWFKLQJYROWDJH 0D[VZLWFKLQJFXUUHQW 0LQVZLWFKLQJFDSDFLW\5HIHUHQFHYDOXH 1 Between contact and coil Between contact sets 6SHFLFDWLRQV 2 Form C, 2 Form D (M.B.B.) 0D[P%\YROWDJHGURS9'&$ $J$XFODG 1 A 30 V DC, 0.5 A 125 V AC (resistive load) 30 W (DC), 62.5 V A (AC) (resistive load) 110 V DC, 125 V AC 1A 10A 10mV DC Standard (B.B.M) type: 140 mW (3 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC) M.B.B. type: 200 mW 100 mW (3 to 12 V DC), 150 mW (24 V DC) 200 mW (3 to 12 V DC), 300 mW (24 V DC) Min. 1,000M (at 500V DC) 0HDVXUHPHQWDWVDPHORFDWLRQDV,QLWLDOEUHDNGRZQYROWDJHVHFWLRQ 6WDQGDUG%%0 W\SH9UPVIRUPLQ'HWHFWLRQFXUUHQWP$ 0%%W\SH9UPVIRUPLQ'HWHFWLRQFXUUHQWP$ 9UPVIRUPLQ'HWHFWLRQFXUUHQWP$ 9UPVIRUPLQ'HWHFWLRQFXUUHQWP$ Between open contacts 1,500 V (10x160s) (FCC Part 68) Single side stable Nominal operating power 1 coil latching 2 coil latching ,QVXODWLRQUHVLVWDQFH,QLWLDO Breakdown voltage (Initial) Electrical characteristics 6XUJH EUHDNGRZQ YROWDJH,QLWLDO Between open contacts 7HPSHUDWXUHULVHDW&68F) Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Mechanical characteristics ([SHFWHGOLIH Conditions )XQFWLRQDO 'HVWUXFWLYH )XQFWLRQDO Vibration resistance 'HVWUXFWLYH Mechanical (at 180 cpm) Shock resistance Electrical (at 20 cpm) Conditions for operation, transport and storage*2 0D[RSHUDWLQJVSHHGDWUDWHGORDG Unit weight 0D[&%\UHVLVWLYHPHWKRGQRPLQDOFRLOYROWDJHDSSOLHGWRWKHFRLOFRQWDFWFDUU\LQJFXUUHQW$ 0D[PV>0D[PV@1RPLQDOFRLOYROWDJHDSSOLHGWRWKHFRLOH[FOXGLQJFRQWDFWERXQFHWLPH 0D[PV>0D[PV@1RPLQDOFRLOYROWDJHDSSOLHGWRWKHFRLOH[FOXGLQJFRQWDFWERXQFHWLPH ZLWKRXWGLRGH Min. 490 m/s2 +DOIZDYHSXOVHRIVLQHZDYHPVGHWHFWLRQWLPHV Min. 980 m/s2 +DOIZDYHSXOVHRIVLQHZDYHPV WR+]DWGRXEOHDPSOLWXGHRIPP'HWHFWLRQWLPHV WR+]DWGRXEOHDPSOLWXGHRIPP Standard (B.B.M) type: Min. 108, M.B.B. type: Min. 107 Standard (B.B.M) type: Min. 2x105 (1 A 30 V DC resistive), Min. 105 (0.5 A 125 V AC resistive) M.B.B. type: Min. 105 (1 A 30 V DC resistive) Standard (B.B.M) type: $PELHQWWHPSHUDWXUH&WR&)WR) +XPLGLW\WR5+1RWIUHH]LQJDQGFRQGHQVLQJDWORZWHPSHUDWXUH M.B.B. type: $PELHQWWHPSHUDWXUH&WR&)WR) +XPLGLW\WR5+1RWIUHH]LQJDQGFRQGHQVLQJDWORZWHPSHUDWXUH 20 cpm $SSUR[J.053 oz 1RWHV 7KLVYDOXHFDQFKDQJHGXHWRWKHVZLWFKLQJIUHTXHQF\HQYLURQPHQWDOFRQGLWLRQVDQGGHVLUHGUHOLDELOLW\OHYHOWKHUHIRUHLWLVUHFRPPHQGHGWRFKHFNWKLVZLWKWKH DFWXDOORDG7;7;67;'UHOD\$J3GFRQWDFWW\SHDUHDYDLODEOHIRUORZOHYHOORDGVZLWFKLQJ9'&P$PD[OHYHO *2 Refer to "AMBIENT ENVIRONMENT" in GENERAL APPLICATION GUIDELINES. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ (c) Panasonic Corporation 2019 ASCTB14E TQ 6XUIDFHPRXQWWHUPLQDO &RLOGDWD 1) Single side stable Nominal coil voltage 1.5 V DC 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC 48 3LFNXSYROWDJH (at 20C 68F) 75%V or less of nominal voltage* (Initial) 'URSRXWYROWDJH (at 20C 68F) 10%V or more of nominal voltage* (Initial) Nominal operating FXUUHQW (at 20C 68F) 93.8 mA 46.7 mA 31 mA 28.1 mA 23.3 mA 15.5 mA 11.7 mA 8.3 mA V DC 6.3 mA Coil resistance [10%](at 20C 68F) Nominal operating power 0D[DSSOLHGYROWDJH (at 20C 68F) 140 mW 150%V of nominal voltage 200 mW 300 mW 120%V of nominal voltage Nominal operating power 0D[DSSOLHGYROWDJH (at 20C 68F) 70 mW 150%V of nominal voltage 2) 1 coil latching Nominal coil voltage 1.5 V DC 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC Set voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Reset voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Nominal operating FXUUHQW (at 20C 68F) 46.9 mA 23.3 mA 15.6 mA 14 mA 11.7 mA 7.8 mA 5.8 mA 4.2 mA Coil resistan [10%](at 20C 68F) 100 mW 3) 2 coil latching Nominal coil voltage 1.5 V DC 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC Set voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Reset voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Nominal operating FXUUHQW (at 20C 68F) Set coil Reset coil 93.8 mA 93.8 mA 46.7 mA 46.7 mA 31 mA 31 mA 28.1 mA 28.1 mA 23.3 mA 23.3 mA 15.5 mA 15.5 mA 11.7 mA 11.7 mA 8.3 mA 8.3 mA Coil resistance [10%](at 20C 68F) Set coil Reset coil Nominal operating power Set coil Reset coil 140 mW 140 mW 200 mW 200 mW 0D[DSSOLHGYROWDJH (at 20C 68F) 150%V of nominal voltage 3XOVHGULYH-,6& Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ (c) Panasonic Corporation 2019 ASCTB14E TQ 6SHFLFDWLRQV Characteristics Contact Rating Item Arrangement ,QLWLDOFRQWDFWUHVLVWDQFHPD[ Contact material Nominal switching capacity 0D[VZLWFKLQJSRZHU 0D[VZLWFKLQJYROWDJH 0D[VZLWFKLQJFXUUHQW 0LQVZLWFKLQJFDSDFLW\5HIHUHQFHYDOXH 1 Single side stable Nominal operating 1 coil latching power 2 coil latching ,QVXODWLRQUHVLVWDQFH,QLWLDO Breakdown voltage (Initial) Electrical characteristics 6XUJHEUHDNGRZQ voltage (Initial) Between open contacts Between contact and coil Between contact sets Between open contacts Between contacts and coil 7HPSHUDWXUHULVHDW&68F) Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Mechanical characteristics ([SHFWHGOLIH Conditions Shock resistance )XQFWLRQDO 'HVWUXFWLYH )XQFWLRQDO Vibration resistance 'HVWUXFWLYH Mechanical Electrical Conditions for operation, transport and storage*2 0D[RSHUDWLQJVSHHGDWUDWHGORDG Unit weight 6SHFLFDWLRQV 2 Form C 0D[P (By voltage drop 6 V DC 1A) $J1LW\SH$XFODG 2 A 30 V DC, 0.5 A 125 V AC (resistive load) 60 W (DC), 62.5 VA (AC) (resistive load) 220 V DC, 125 V AC 2A 10A 10mV DC 140 mW (1.5 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC) 70 mW (1.5 to 12 V DC), 100 mW (24 V DC) 140 mW (1.5 to 12 V DC), 200 mW (24 V DC) Min. 1,000M (at 500V DC) 0HDVXUHPHQWDWVDPHORFDWLRQDV,QLWLDOEUHDNGRZQYROWDJHVHFWLRQ 9UPVIRUPLQ'HWHFWLRQFXUUHQWP$ 9UPVIRUPLQ'HWHFWLRQFXUUHQWP$ 9UPVIRUPLQ'HWHFWLRQFXUUHQWP$ 1,500 V (10x160s) (FCC Part 68) 2,500 V (2x10s) (7HOFRUGLD) 0D[& %\UHVLVWLYHPHWKRGQRPLQDOFRLOYROWDJHDSSOLHGWRWKHFRLOFRQWDFWFDUU\LQJFXUUHQW$ 0D[PV>0D[PV@1RPLQDOFRLOYROWDJHDSSOLHGWRWKHFRLOH[FOXGLQJFRQWDFWERXQFH time.) 0D[PV>0D[PV@1RPLQDOFRLOYROWDJHDSSOLHGWRWKHFRLOH[FOXGLQJFRQWDFWERXQFH WLPH ZLWKRXWGLRGH Min. 750 m/s2 +DOIZDYHSXOVHRIVLQHZDYHPVGHWHFWLRQWLPHV Min. 1,000 m/s2 +DOIZDYHSXOVHRIVLQHZDYHPV WR+]DWGRXEOHDPSOLWXGHRIPP'HWHFWLRQWLPHV WR+]DWGRXEOHDPSOLWXGHRIPP Min. 108 (at 180 cpm) Min. 105 (2 A 30 V DC resistive), Min. 2x105 (1 A 30 V DC resistive), Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm) $PELHQWWHPSHUDWXUH &WR&)WR)0D[&WR&$ 0D[)WR)$ +XPLGLW\WR5+1RWIUHH]LQJDQGFRQGHQVLQJDWORZWHPSHUDWXUH 20 cpm $SSUR[J.071 oz 1RWHV 7KLVYDOXHFDQFKDQJHGXHWRWKHVZLWFKLQJIUHTXHQF\HQYLURQPHQWDOFRQGLWLRQVDQGGHVLUHGUHOLDELOLW\OHYHOWKHUHIRUHLWLVUHFRPPHQGHGWRFKHFNWKLVZLWKWKH DFWXDOORDG7;7;67;'UHOD\$J3GFRQWDFWW\SHDUHDYDLODEOHIRUORZOHYHOORDGVZLWFKLQJ>9'&P$PD[OHYHO@ *2 Refer to "AMBIENT ENVIRONMENT" in GENERAL APPLICATION GUIDELINES. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ (c) Panasonic Corporation 2019 ASCTB14E TQ REFERENCE DATA 6WDQGDUG3&ERDUGWHUPLQDODQGVHOIFOLQFKLQJWHUPLQDO /LIHFXUYH 0D[LPXPVZLWFKLQJFDSDFLW\ 3. Mechanical life No. of operations, x104 1.0 0.5 0.4 0.3 30 V DC resistive load 100 125 V AC resistive load 10 0.2 100 200 Switching voltage,V 0 0.5 1.0 Switching current, A 90 Min. 60 50 40 Drop-out voltage Max. 30 20 &RQWDFWUHVLVWDQFHP Ratio against the rated voltage, %V 90 Max. Min. 80 70 60 50 Max. 40 Min. 30 10 5 10 15 No. of operations, x104 20 0 5 10 15 No. of operations, x104 20 70 90 80 70 60 50 40 Max. 30 Min. Temperature rise, C &RQWDFWUHVLVWDQFHP Max. 20 Min. 10 10 100 1,000 10,000 No. of operations, x104 90 80 Pick-up voltage 70 Min. 60 50 40 Drop-out voltage Min. 20 10 0 5 No. of operations, x104 5 No. of operations, x104 Nominal coil voltage 3 to 12 V DC type 24 V DC type 60 50 1A 40 1A 0A 30 40 30 Drop-out 20 voltage -40 -20 0 -10 -30 100 110 120 130 140 150 Coil applied voltage, %V -40 0DOIXQFWLRQDOVKRFNVLQJOHVLGHVWDEOH Tested sample: TQ2-12V, 6 pcs. , ,Z XX Y Z 980m/s2 Y, Y 1.0 980m/s2 Z 980m/s2 980m/s2 , Z 980m/s2 , X 0.8 0.4 0.2 1,000 Deenergized condition Energized condition X 0.6 50 Pick-up voltage 60 80 Ambient temperature,C -20 +LJKIUHTXHQF\FKDUDFWHULVWLFV (Insertion loss) Insertion loss, dB 100 x x 10 20 40 0 10 +LJKIUHTXHQF\FKDUDFWHULVWLFV (Isolation) 100 Frequency, MHz 10 Tested sample: TQ2-12V, 5 pcs. 10 10 10 Max. 30 20 20 0 Max. $PELHQWWHPSHUDWXUHC 86F 100 Isolation, dB Drop-out voltage 30 $PELHQWWHPSHUDWXUHFKDUDFWHULVWLFV &RLOWHPSHUDWXUHULVH& Tested sample: TQ2-12V 0HDVXUHGSRUWLRQ,QVLGHWKHFRLO Change of contact resistance 40 100 20 10 0 50 &KDQJHRISLFNXSDQGGURSRXWYROWDJH Change of contact resistance 100 70 Max. Min. 60 Tested sample: TQ2-12V, 6 pcs. Condition: 0.5 A 125 V AC resistive load, 20 cpm 100 Pick-up voltage Pick-up voltage 70 4.-(2) Electrical life (AC load) Tested sample: TQ2-12V, 6 pcs. Condition: 1 A 30 V DC resistive load, 20 cpm 80 80 0 4.-(1) Electrical life (DC load) &KDQJHRISLFNXSDQGGURSRXWYROWDJH 90 Variation ratio,% 30 100 Ratio against the rated voltage, %V Switching current, A DC load (cosj=1) AC load (cosj=1) Ratio against the rated voltage, %V Tested sample: TQ2-12V, 10 pcs. 0 980m/s2 , Y 10 100 Frequency, MHz 1,000 Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ (c) Panasonic Corporation 2019 ASCTB14E TQ ,QAXHQFHRIDGMDFHQWPRXQWLQJ ,QAXHQFHRIDGMDFHQWPRXQWLQJ 10. Contact reliability (1 mA 5 V DC resistive load) 10 ON Pick-up voltage Rate of change, % Rate of change, % Rate of change, % Rate of change, % Tested sample: TQ2-12V Condition: Detection level 10 W ON 0 -10 ON OFF OFF 10 Drop-out voltage 0 OFF -10 0 5 .197 Inter-relay distance 10 Pick-up voltage ON F(t), % 99.9 99.0 95.0 ON 70.0 50.0 30.0 0 -10 ON 10 10.0 5.0 OFF Drop-out voltage 2.0 1.0 0.5 0 OFF -10 0.2 0.1 1.0 OFF 0 5 .197 Inter-relay distance , mm inch m=2.15 m=2.7107 95% reliability limit = 7.6106 (Weibull probability paper) 10 , mm inch 100 No. of operations, x106 $FWXDOORDGWHVWP$9'&ZLUHVSULQJUHOD\ORDG &LUFXLW &KDQJHRISLFNXSDQGGURSRXWYROWDJH 100 90 90 57 V DC 80 Pick-up voltage 70 Max. Min. 60 50 40 30 Drop-out voltage 12. 0.1 A 53 V DC resistive load test &KDQJHRISLFNXSDQGGURSRXWYROWDJH Max. Min. 20 10 0 Wire spring relay Circuit diagram &RQWDFWUHVLVWDQFHP 10 20 30 40 No. of operations, x104 80 70 60 50 40 Max. 30 Min. 20 10 0 50 10 20 30 40 No. of operations, x104 50 Change of contact resistance 100 90 80 Pick-up voltage Max. Min. 70 60 50 40 30 Drop-out voltage 20 Max. Min. 10 0 500 1,000 1,500 &RQWDFWUHVLVWDQFHP 100 Ratio against the rated voltage, %V 100 Ratio against the rated voltage, %V 20Hz Change of contact resistance 90 80 70 60 Max. 50 40 30 Min. 20 10 0 2,000 500 No. of operations, x104 1,000 1,500 2,000 No. of operations, x104 'LVWULEXWLRQRI0%%WLPH Tested sample: TQ2-2M-5V, 85 pcs. 50 40 30 20 26 19 15 21 Terminal Nos. 2-3-4: ON -x: 105.6 ms 3sn-1: 163.8 ms Min.: 23 ms Max.: 243 ms Terminal Nos. 7-8-9: ON -x: 115.6 ms 3sn-1: 167.3 ms 30 Min.: 35 ms Max.: 254 ms 19 Terminal Nos. 2-3-4: OFF -x: 71.6 ms 3sn-1: 127.1 ms Min.: 17 ms Max.: 187 ms Terminal Nos. 7-8-9: OFF -x: 80.7 ms 3sn-1: 156.7 ms Min.: 29 ms Max.: 298 ms 50 41 40 35 31 30 27 20 17 12 11 10 60 10 6 7 4 10 150 200 250 300 350 ms max. 2 100 150 ~ ~ 100 10 1 50 ~ ~ 50 0 ~ ~ 300 ms min. ~ ~ 4 200 250 ~ 100 150 ~ 50 10 ~ ~ 0 ~ 2 200 250 300 ms min. 50 100 150 200 250 300 350 ms max. ~ 60 Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ (c) Panasonic Corporation 2019 ASCTB14E TQ 6XUIDFHPRXQWWHUPLQDO /LIHFXUYH 0HFKDQLFDOOLIHPRXQWLQJE\,56PHWKRG Tested sample: TQ2SA-12V, 10 pcs. Ratio against the rated voltage, %V 0D[LPXPVZLWFKLQJFDSDFLW\ No. of operations, x 104 Switching current, A 3.0 2.0 100 DC resistive load 1.0 AC resistive load 0.5 0.4 0.3 50 30 20 125V AC resistive load 30V DC resistive load 10 0.2 100 90 80 Pick-up voltage 70 60 Min. 50 40 Drop-out voltage 30 20 0 50 100 200 300 Contact voltage, V 0 1.0 2.0 Switching current, A 4.-(1) Electrical life (2 A 30 V DC resistive load) 100 90 90 Pick-up voltage Max. Min. 60 50 40 Drop-out voltage 30 Max. 20 0 IRS 1 2 80 70 60 50 Max. 40 Min. 30 20 Min. 10 100 10 0 3 4 5 6 7 8 9 10 4 No. of operations, x10 IRS 1 2 70 80 70 60 50 Max. 40 Temperature rise, C &RQWDFWUHVLVWDQFHP 90 Coil voltage DC 12V type DC 48V type 0A 2A 0A 30 20 Max. 60 Min. 50 40 Drop-out voltage 30 Max. 20 Min. 10 IRS 1 2 3 4 5 6 7 8 9 10 4 No. of operations, x10 5 2A 50 40 Pick-up voltage 70 Tested sample: TQ2SA-12V, 6 pcs. 20 Min. 30 60 80 6. Operate/release time Tested sample: TQ2SA-12V, 6 pcs. 3RLQWPHDVXUHG,QVLGHWKHFRLO $PELHQWWHPSHUDWXUHC 77F 100 90 0 3 4 5 6 7 8 9 10 No. of operations, x104 &RLOWHPSHUDWXUHULVH Change of contact resistance PRXQWLQJE\,56PHWKRG Ratio against the rated voltage, %V 100 70 10 100 1,000 10,000 4 No. of operations, x10 Tested sample: TQ2SA-12V, 6 pcs Operating speed: 20 cpm &KDQJHRISLFNXSDQGGURSRXWYROWDJH PRXQWLQJE\,56PHWKRG Change of contact resistance PRXQWLQJE\,56PHWKRG 80 IRS 1 4.-(2) Electrical life (0.5 A 125 V AC resistive load) &RQWDFWUHVLVWDQFHP Ratio against the rated voltage, %V Tested sample: TQ2SA-12V, 6 pcs. Operating speed: 20 cpm &KDQJHRISLFNXSDQGGURSRXWYROWDJH PRXQWLQJE\,56PHWKRG Operate and release time, ms 20 30 Max. Min. 10 0 Max. Operate time Release time 4 Max. Min. 3 2 Max. Min. 1 10 10 0 IRS 1 2 3 4 5 6 7 8 9 10 No. of operations, x104 $PELHQWWHPSHUDWXUHFKDUDFWHULVWLFV 0 +LJKIUHTXHQF\FKDUDFWHULVWLFV (Isolation) 70 80 90 100 110 120 Coil applied voltage, %V +LJKIUHTXHQF\FKDUDFWHULVWLFV (Insertion loss) 40 20 Pick-up voltage x Drop-out voltage 20 40 60 80 Ambient temperature, C -20 Isolation, dB -40 -20 Rate of change, % Tested sample: TQ2SA-12V, 5 pcs. 0 100 110 120 130 140 150 Coil applied voltage, %V Insertion loass, dB 0 100 1.0 0.8 0.6 50 0.4 0.2 -40 10 100 Frequency, MHz 1,000 10 100 Frequency, MHz 1,000 Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ (c) Panasonic Corporation 2019 ASCTB14E TQ 0DOIXQFWLRQDOVKRFNVLQJOHVLGHVWDEOH Tested sample: TQ2SA-12V, 6 pcs 1000m/s 2 Z 1000m/s 2 X' 1000m/s 2 Y' ON -10 OFF OFF 10 Drop-out voltage 0 OFF -10 0.08 ) 48 V DC - 0.08 ) TQ-SMD 3 relay 2 Wire spring relay Pick-up voltage 0 ON -10 ON OFF 10 Drop-out voltage 0 OFF -10 0 100 100 90 90 80 Pick-up voltage 70 Max. 60 Min. 50 40 Drop-out voltage 30 Max. Min. 20 0 OFF 1 2 3 4 5 6 .039 .079 .118 .157 .197 .236 Inter-relay distance , mm inch Change of contact resistance PRXQWLQJE\,56PHWKRG 80 70 60 50 40 Max. 30 Min. 20 10 DIMENSIONS (mm inch) ON 10 1 2 3 4 5 6 .039 .079 .118 .157 .197 .236 Inter-relay distance , mm inch &KDQJHRISLFNXSDQGGURSRXWYROWDJH PRXQWLQJE\,56PHWKRG Ratio against the rated voltage, %V + ON 0 0 3XOVHGLDOLQJWHVW (35 mA 48 V DC wire spring relay load) Tested sample: TQ2SA-12V, 6 pcs. &LUFXLW Rate of change, % Z' 1000m/s 2 ON Pick-up voltage &RQWDFWUHVLVWDQFHP X 1000m/s2 10 ,QAXHQFHRIDGMDFHQWPRXQWLQJ Tested sample: TQ2SA-12V, 6 pcs. Rate of change, % Deenergized condition Energized condition X' Y 1000m/s 2 Rate of change, % Z X Rate of change, % Z' Y Y' ,QAXHQFHRIDGMDFHQWPRXQWLQJ Tested sample: TQ2SA-12V, 5 pcs. 10 IRS 10 20 30 40 4 No. of operations, x10 0 50 IRS 10 20 30 40 No. of operations, x104 50 7KH&$'GDWDRIWKHSURGXFWVZLWKDCAD Data PDUNFDQEHGRZQORDGHGIURPKWWSVLQGXVWULDOSDQDVRQLFFRPDFH 6WDQGDUG3&ERDUGWHUPLQDODQG6HOIFOLQFKLQJWHUPLQDO CAD Data ([WHUQDOGLPHQVLRQV PC board pattern (Bottom view) Standard PC board terminal (4.75) (.187) 14 .551 2.54 .100 9 .354 10.16 .400 10-1.0 dia. 10-.039 dia. 5 +0.4 -0.2 .197 +.016 -.008 2.54 .100 7.62 .300 3.5 .138 0.25 .010 2.54 .100 0.5 .020 7.62 .300 0.25 .010 Tolerance: 0.1 .004 Self-clinching terminal (4.75) (.187) 14 .551 9 .354 Schematic (Bottom view) 5 +0.4 -0.2 .197 +.016 -.008 Single side stable 3.5 .138 + 0.25 .010 2.54 .100 0.5 .020 7.62 .300 1 2 3 4 5 1-coil latching - 1 2 3 4 5 2-coil latching 1 2 3 4 + 0.25 .010 - General tolerance: 0.3 .012 10 9 8 7 6 Direction indication (Deenergized condition) + - + 10 9 8 7 6 Direction indication (Reset condition) 10 9 5 8 7 6 Direction indication (Reset condition) Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ (c) Panasonic Corporation 2019 ASCTB14E TQ 6XUIDFHPRXQWWHUPLQDO CAD Data Type ([WHUQDOGLPHQVLRQV*HQHUDOWROHUDQFH0.12) 14 .551 9 .354 0.5 .020 9.56 .376 1 .039 0.25 .010 4.9 .193 2.54 .100 1.84 .072 8.46 .333 7.62 .300 9.30.5 .366.020 0.5 .020 2.54 .100 2.94 .116 9 .354 Max.7.5 .295 2.54 .100 0.25 .010 7.62 .300 11.50.5 .453.020 14 .551 SS type 1 .039 4.9 .193 0.5 .020 2.54 .100 9.56 .376 9 .354 Max.7.5 .295 2.54 .100 2.94 .116 7.62 .300 11.50.5 .453.020 0.2 .008 14 .551 SL type 1 .039 0.25 .010 4.9 .193 5.6 .220 SA type 2.54 .100 6XJJHVWHGPRXQWLQJSDG7RSYLHZ 7ROHUDQFH.004) 6FKHPDWLF7RSYLHZ Single side stable - + 10 9 8 7 6 1-coil latching + 1 2 3 4 5 Direction indication (Deenergized condition) 10 9 8 2-coil latching 7 6 10 9 8 7 + - + 1 2 3 4 5 1 6 2 3 4 Direction indication Direction indication (Reset condition) (Reset condition) 5 Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ (c) Panasonic Corporation 2019 ASCTB14E TQ NOTES 3DFNLQJVW\OH 7KHUHOD\LVSDFNHGLQDWXEHZLWKWKH relay orientation mark on the left side, as VKRZQLQWKHJXUHEHORZ Orientation (indicates PIN No.1) stripe (ii) SL, SS type mm inch 0.4 .016 Relay polarity bar 2.0 (Z type) 1.5 +0.1 0 dia. .079 .059 +.004 dia. 0 16.0 .630 TQ-SMD relays Note) *SS type 0.4 .016 Relay polarity bar 2.0 (Z type) 1.5 +0.1 0 dia. .079 .059 +.004 dia. 0 4.0 .157 A (2) Dimensions of plastic reel 21 dia. .827 dia. 1.75 .069 14.6 .575 TQ-SMD relays 16.0 .630 80 1 dia. 3.150 .039 dia. 330 2 dia. 12.992 .079 dia. 12.3 24.0 0.3 .484 .945 .012 Tape coming out direction C B mm inch 2.0 .079 11.5 .453 6.3 0.2 .248 .008 12.3 24.0 0.3 .484 .945 .012 (10.1 .398)* Tape coming out direction Stopper (green) 7DSHDQGUHHOSDFNLQJVXUIDFHPRXQW terminal type) (1) Tape dimensions (i) SA type mm inch .575 11.5 .453 7.8 0.2 .307 .008 Stopper (gray) 1.75 4.0 .069 .157 14.6 $XWRPDWLFLQVHUWLRQ 7RPDLQWDLQWKHLQWHUQDOIXQFWLRQRIWKH UHOD\WKHFKXFNLQJSUHVVXUHVKRXOGQRW H[FHHGWKHYDOXHVEHORZ &KXFNLQJSUHVVXUHLQWKHGLUHFWLRQ$ 9.8 N {1 kgf} or less &KXFNLQJSUHVVXUHLQWKHGLUHFWLRQ% 9.8 N {1 kgf} or less &KXFNLQJSUHVVXUHLQWKHGLUHFWLRQ& 9.8 N {1 kgf} or less 3OHDVHFKXFNWKHSRUWLRQ $YRLGFKXFNLQJWKHFHQWHURIWKHUHOD\ ,QDGGLWLRQH[FHVVLYHFKXFNLQJSUHVVXUH WRWKHSLQSRLQWRIWKHUHOD\VKRXOGEH avoided. 13 dia. .512 dia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board terminal Humidity (%RH) Humidity (%RH) 85 85 Allowable range Allowable range Avoid icing when used at temperatures lower than 0C Avoid condensation when used at temperatures higher than 0C 5 -40 0 Temperature(C) Avoid condensation when used at temperatures higher than 0 Avoid icing when used at temperatures lower than 0 5 85 -40 0 Temperature(C) 70 Please refer to WKHODWHVWSURGXFWVSHFLFDWLRQV ZKHQGHVLJQLQJ\RXUSURGXFW 5HTXHVWVWRFXVWRPHUV KWWSVLQGXVWULDOSDQDVRQLFFRPDFHVDOHVSROLFLHV Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ (c) Panasonic Corporation 2019 ASCTB14E GUIDELINES FOR SIGNAL RELAYS USAGE For cautions for use, please read "GUIDELINES FOR RELAY USAGE". https://industrial.panasonic.com/ac/e/control/relay/cautions_use/index.jsp Precautions for Coil Input Long term current carrying A circuit that will be carrying a current continuously for long periods without relay switching operation. (circuits for emergency lamps, alarm devices and error inspection that, for example, revert only during malfunction and output warnings with form B contacts) Continuous, long-term current to the coil will facilitate deterioration of coil insulation and characteristics due to heating of the coil itself. For circuits such as these, please use a magnetic-hold type latching relay. If you need to use a single stable relay, use a sealed type relay WKDWLVQRWHDVLO\DHFWHGE\DPELHQWFRQGLWLRQVDQGPDNHDIDLOVDIH circuit design that considers the possibility of contact failure or disconnection. Temperature rise due to pulse voltage When a pulse voltage with ON time of less than 2 minutes is used, the coil temperature rise bares no relationship to the ON time. This varies with the ratio of ON time to OFF time, and compared with continuous current passage, it is rather small. The various relays are essentially the same in this respect. Current passage time (%) For continuousu passage Tempereture rise value is 100% ON : OFF = 3 : 1 About 80% ON : OFF = 1 : 1 About 50% ON : OFF = 1 : 3 About 35% DC Coil operating power ON : OFF = 1 : 1 Voltage Steady state DC current should be applied to the coil. The wave form should be rectangular. If it includes ripple, the ripple factor should be less than 5%. +RZHYHUSOHDVHFKHFNZLWKWKHDFWXDOFLUFXLWVLQFHWKHHOHFWULFDO characteristics may vary. The rated coil voltage should be applied to WKHFRLODQGWKHVHWUHVHWSXOVHWLPHRIODWFKLQJW\SHUHOD\GLHUVIRU HDFKUHOD\VSOHDVHUHIHUWRWKHUHOD\ VLQGLYLGXDOVSHFLFDWLRQV Time Coil connection Operate voltage change due to coil temperature rise (Hot start) :KHQFRQQHFWLQJFRLOVRISRODUL]HGUHOD\VSOHDVHFKHFNFRLOSRODULW\ (+,-) at the internal connection diagram (Schematic). If any wrong FRQQHFWLRQLVPDGHLWPD\FDXVHXQH[SHFWHGPDOIXQFWLRQOLNH DEQRUPDOKHDWUHDQGVRRQDQGFLUFXLWGRQRWZRUN$YRLG impressing voltages to the set coil and reset coil at the same time. Maximum allowable voltage and temperature rise Proper usage requires that the rated coil voltage be impressed on the coil. Note, however, that if a voltage greater than or equal to the maximum continuous voltage is impressed on the coil, the coil may burn or its layers short due to the temperature rise. Furthermore, do not exceed the usable ambient temperature range listed in the catalog. Maximum allowable voltage for coil In addition to being a requirement for relay operation stability, the maximum continuous impressed coil voltage is an important constraint for the prevention of such problems as thermal deterioration or GHIRUPLW\RIWKHLQVXODWLRQPDWHULDORUWKHRFFXUUHQFHRIUHKD]DUGV In DC relays, after continuous passage of current in the coil, if the current is turned OFF, then immediately turned ON again, due to the WHPSHUDWXUHULVHLQWKHFRLOWKHSLFNXSYROWDJHZLOOEHFRPHVRPHZKDW higher. Also, it will be the same as using it in a higher temperature atmosphere. The resistance/temperature relationship for copper wire is about 0.4% for 1C, and with this ratio the coil resistance increases. That is, in order to operate of the relay, it is necessary that the voltage EHKLJKHUWKDQWKHSLFNXSYROWDJHDQGWKHSLFNXSYROWDJHULVHVLQ accordance with the increase in the resistance value. However, for some polarized relays, this rate of change is considerably smaller. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ Panasonic Corporation 2019 ASCTB414E 201906 GUIDELINES FOR SIGNAL RELAYS USAGE Ambient Environment Dew condensation Condensation occurs when the ambient temperature drops suddenly from a high temperature and humidity, or the relay and microwave device is suddenly transferred from a low ambient temperature to a KLJKWHPSHUDWXUHDQGKXPLGLW\&RQGHQVDWLRQFDXVHVWKHIDLOXUHVOLNH insulation deterioration, wire disconnection and rust etc. Panasonic Corporation does not guarantee the failures caused by condensation. The heat conduction by the equipment may accelerate the cooling of device itself, and the condensation may occur. Please conduct product evaluations in the worst condition of the actual usage. (Special attention should be paid when high temperature heating parts are close to the device. Also please consider the condensation may occur inside of the device.) Icing Condensation or other moisture may freeze on relays when the WHPSHUDWXUHEHFRPHORZHUWKDQ&7KLVLFLQJFDXVHVWKHVWLFNLQJRI movable portion, the operation delay and the contact conduction failure etc. Panasonic Corporation does not guarantee the failures caused by the icing. The heat conduction by the equipment may accelerate the cooling of relay itself and the icing may occur. Please conduct product evaluations in the worst condition of the actual usage. Low temperature and low humidity The plastic becomes brittle if the switch is exposed to a low temperature, low humidity environment for long periods of time. High temperature and high humidity Storage for extended periods of time (including transportation periods) at high temperature or high humidity levels or in atmospheres with RUJDQLFJDVHVRUVXOGHJDVHVPD\FDXVHDVXOGHOPRUR[LGHOPWR form on the surfaces of the contacts and/or it may interfere with the IXQFWLRQV&KHFNRXWWKHDWPRVSKHUHLQZKLFKWKHXQLWVDUHWREH stored and transported. Package ,QWHUPVRIWKHSDFNLQJIRUPDWXVHGPDNHHYHU\HRUWWRNHHSWKH HHFWVRIPRLVWXUHRUJDQLFJDVHVDQGVXOGHJDVHVWRWKHDEVROXWH minimum. Storage requirements 6LQFHWKH60'W\SHLVVHQVLWLYHWRKXPLGLW\LWLVSDFNDJHGZLWKWLJKWO\ VHDOHGDQWLKXPLGLW\SDFNDJLQJ+RZHYHUZKHQVWRULQJSOHDVHEH careful of the following. 3OHDVHXVHSURPSWO\RQFHWKHDQWLKXPLGLW\SDFNLVRSHQHG6LJQDO UHOD\ZLWKLQKRXUV0D[&5+ ,IOHIWZLWKWKHSDFN open, the relay will absorb moisture which will cause thermal stress ZKHQUHARZPRXQWLQJDQGWKXVFDXVHWKHFDVHWRH[SDQG$VD UHVXOWWKHVHDOPD\EUHDN 2) If relays will not be used within 72 hours, please store relays in a humidity controlled desiccator or in an anti-humidity bag to which silica gel has been added. *If the relay is to be soldered after it has been exposed to excessive KXPLGLW\DWPRVSKHUHFUDFNVDQGOHDNVFDQRFFXU%HVXUHWRPRXQW the relay under the required mounting conditions 7KHIROORZLQJFDXWLRQDU\ODEHOLVD[HGWRWKHDQWLKXPLGLW\SDFN Silicon When a source of silicone substances (silicone rubber, silicone oil, VLOLFRQHFRDWLQJPDWHULDOVDQGVLOLFRQHOOLQJPDWHULDOVHWF LVXVHG around the relay, the silicone gas (low molecular siloxane etc.) may be produced. This silicone gas may penetrate into the inside of the relay. When the UHOD\LVNHSWDQGXVHGLQWKLVFRQGLWLRQVLOLFRQHFRPSRXQGPD\DGKHUH to the relay contacts which may cause the contact failure. Do not use any sources of silicone gas around the relay (Including plastic seal types). NOx Generation When relay is used in an atmosphere high in humidity to switch a load which easily produces an arc, the NOx created by the arc and the water absorbed from outside the relay combine to produce nitric acid. 7KLVFRUURGHVWKHLQWHUQDOPHWDOSDUWVDQGDGYHUVHO\DHFWVRSHUDWLRQ Avoid use at an ambient humidity of 85% RH or higher (at 20C). If use at high humidity is unavoidable, please contact our sales representative. Others Cleaning 1) Although the environmentally sealed type relay (plastic sealed type, etc.) can be cleaned, avoid immersing the relay into cold liquid (such as cleaning solvent) immediately after soldering. Doing so may deteriorate the sealing performance. 2) Surface mount terminal type relay is sealed type and it can be cleaned by immersion. Use pure water or alcohol-based cleaning solvent. 3) Cleaning with the boiling method is recommended (The temperature of cleaning liquid should be 40C or lower). Avoid ultrasonic cleaning on relays. Use of ultrasonic cleaning may FDXVHEUHDNVLQWKHFRLORUVOLJKWVWLFNLQJRIWKHFRQWDFWVGXHWRWKH ultrasonic energy. Please refer to WKHODWHVWSURGXFWVSHFLFDWLRQV when designing your product. *Requests to customers: https://industrial.panasonic.com/ac/e/salespolicies/ Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ Panasonic Corporation 2019 ASCTB414E 201906 Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industral.panasonic.com/ac/e/ (c)Panasonic Corporation 2019 Specifications are subject to change without notice.