HMC535LP4 / 535LP4E v01.1009 PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz Typical Applications Features Phase-Locked Oscillator for: Pout: +9 dBm * VSAT Radio Phase Noise: -110 dBc/Hz @100 KHz Typ. * Point-to-Point & Point-to-Multi-Point Radio * Test Equipment & Industrial Controls Single Supply: +5V @ 340 mA +12V @ 28 mA * Military End-Use 24 Lead 4x4mm QFN Package: 9 mm2 Functional Diagram General Description The HMC535LP4 & HMC535LP4E are GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC PLOs. The PLO's phase noise performance is excellent over temperature, shock, and process due to the oscillator's monolithic structure. Power output is +9 dBm typical from a +5V supply voltage. All functions (VCO, Op-Amp, PFD, Prescaler) are fully integrated while providing allowances for off-chip customer specific loop components. The PLO MMIC accepts a single-ended or a differential reference oscillator input signal in the range of 230 to 240 MHz, and a digital Lock Detector (LD) output is provided to confirm the status of the loop. The phase-locked oscillator is packaged in a leadless QFN 4 x 4 mm surface mount package. PLOS - SMT 12 Electrical Specifi cations, TA = +25 C Parameter Power Supplies: VCO Voltage VCO Current Op-Amp Voltage Op-Amp Current Digital Voltage Digital Current PLO Characteristics: RF Operating Freq. RF Power Reference Input Freq. Reference Input Power RF Phase Noise Locking Time Lock Detect Output Locked Unlocked 12 - 162 Vcc1 Icc1 Vcc2 Icc2 Vcc3 Icc3 100 KHz offset Loop BW = 1 MHz Min. Typ. Max. Units -- -- -- -- -- -- 5 172 12 28 5 168 -- -- -- -- -- -- V mA V mA V mA 14.7 6 229.69 0 -- -- -- 9 -- 5 -110 20 15.4 -- 240.62 10 -- -- GHz dBm MHz dBm dBc/Hz s -- 0.7 0.3 1.0 0.5 -- Vave Vave For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC535LP4 / 535LP4E v01.1009 PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz Electrical Specifi cations, (Continued) Tuning Voltage Leakage Current RF Phase Noise RF Harmonics Vtune +2 to +9.5 V Vtune 0 to +2 V Vtune +9.5 to +12 V Vtune +2 to +9.5 V 100 kHz offset 1/2 FOP 3/2 FOP 4/2 FOP 5/2 FOP RF Pushing RF Pulling RF Drift Rate 3 dB Modulator Bandwidth VSWR 2:1 any phase VTVCO input Phase Frequency Detector: REF Input Capacitance REF Input Resistance REF Input VSWR Output High Voltage Output Low Voltage Phase Noise Op-Amp Characteristics: Input Offset Voltage Input bias Current Large-Signal Voltage Gain Common Mode Rejection Ratio Input Common Mode Range Power Supply Rejection Ratio Output Voltage Swing Low Output Voltage Swing High Gain Bandwidth Product Slew Rate Phase Margin Input Voltage Noise Prescaler (Divider) Characteristics: Prescaler Division Phase Noise Referenced to 50 Ohms VCM = 2.5V, 5.2V VCM = 2.5V, 5.2V Open Loop, No Load VCM = 2.5V Frequency = 1 MHz VCM = 2.5V Frequency = 1 MHz No Load, ISINK = 5 mA No Load ISOURCE = 5 mA Frequency = 6 MHz AV = 10, No Load VO = 10V Open Loop Frequency = 10 kHz Min. Typ. Max. Units 14.7 6 -- -- 50 -- -- -- -- -- -- -- -- -- 30 -- 9 160 -- -- -- -108 -- -- -- -- -- -- -- -- 15.4 -- -- 590 -- 25 -- -20 -35 -8 -25 -125 10 20 -- GHz dBm MHz/V MHz/V MHz/V A dBc/Hz dBc dBc dBc dBc MHz/V MHz MHz/ C MHz -- -- -- -- Vcc3 -1.9 -- -- 50 -- Vcc3 Vcc3 -1.95 -150 10 -- 2:1 -- Vcc3 -2 -- pF Ohm V V dBc/Hz -- -- -- -- 1 5 69 104 -- -- -- -- mV A dB dB 2.5 -- -- 63 5.2 -- V dB -- -- 10 10 -- -- 0.8 0.81 10.5 10.2 400 146 1.2 1.2 -- -- -- -- V V V V MHz V/s -- -- 110 1.6 -- -- Deg nV / sqrt (Hz) -- -- 64 -156 -- -- dBc/Hz For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 12 PLOS - SMT Parameter VCO Characteristics: RF Operating Freq. RF Power RF Tuning Sensitivity 12 - 163 HMC535LP4 / 535LP4E v01.1009 PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz PLO Performance Plots Reference Spurs @ 15 GHz BW = 1 MHz, Ref. Frequency = 234 MHz 15 GHz Locked RF Signal BW = 1 MHz, Ref. Frequency = 234 MHz 10 10 0 Center = 15 GHz Span = 600 MHz Res. Bandwidth = 100 kHz Video Bandwidth = 1 kHz -10 -20 OUTPUT POWER (dB) OUTPUT POWER (dB) 0 -75 dBc -30 -40 -50 234 MHz -60 -20 -30 -40 -50 -60 -70 -70 -80 -80 -90 14.7 14.8 12 14.9 15 15.1 15.2 Center = 15 GHz Span = 50 MHz Res. Bandwidth = 300 kHz Video Bandwidth = 300 kHz -10 -90 14.975 15.3 14.985 14.995 FREQUENCY (GHz) 15.005 15.015 15.025 FREQUENCY (GHz) PLOS - SMT Phase Noise Performance SSB PHASE NOISE (dBc/Hz) -10 -30 -50 Fref. = 234 MHz RF = 15 GHz Pref. = 5 dBm +25 C +85 C -40 C -70 -90 -110 -130 -150 -170 2 10 3 4 10 10 5 6 10 10 7 10 8 10 OFFSET FREQUENCY (Hz) VCO Performance Plots Frequency vs. Tuning Voltage, T = 25C Frequency vs. Tuning Voltage, Vcc1 = +5V OUTPUT FREQUENCY (GHz) 15.8 OUTPUT FREQUENCY (GHz) 15.8 15.3 14.8 Vcc= 4.75V Vcc= 5.00V Vcc= 5.25V 14.3 13.8 14.8 +25 C +85 C -40 C 14.3 13.8 0 2 4 6 8 TUNING VOLTAGE (VOLTS) 12 - 164 15.3 10 12 0 2 4 6 8 10 TUNING VOLTAGE (VOLTS) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 12 HMC535LP4 / 535LP4E v01.1009 PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz VCO Performance Plots (continued) Sensitivity vs. Tuning Voltage, Vcc1 = +5V Output Power vs. Tuning Voltage, Vcc1 = +5V 15 500 OUTPUT POWER (dBm) +25 C +85 C -40 C 400 300 200 100 0 12 9 6 +25 C +85 C -40 C 3 0 0 2 4 6 8 10 0 12 2 4 TUNING VOLTAGE (VOLTS) SSB Phase Noise vs. Tuning Voltage 8 10 12 12 SSB Phase Noise @ Vtune = +5V 0 SSB PHASE NOISE (dBc/Hz) -60 SSB PHASE NOISE (dBc/Hz) 6 TUNING VOLTAGE (VOLTS) PLOS - SMT SENSITIVITY (MHz/VOLT) 600 -70 -80 10 kHz offset 100 kHz offset -90 -20 -40 +25 C +85 C -40 C -60 -80 -100 -100 -120 -110 -140 -120 1 3 5 7 9 -160 3 10 11 4 5 10 TUNING VOLTAGE (VOLTS) 10 6 10 7 10 OFFSET FREQUENCY (Hz) Phase-Frequency Detector Performance Plots Error Voltage vs. Temperature Pin = 0 dBm, Fin = 235 MHz SSB Phase Noise Performance Pin = 0 dBm, T = 25C 0 -20 0.8 SSB PHASE NOISE (dBc/Hz) ERROR VOLTAGE (Vdc) 1.2 +25 C +85 C -40 C 0.4 0 -40 -60 -80 -100 -120 -0.4 -140 -0.8 -160 -1.2 -p -p/2 0 p/2 PHASE DIFFERENCE (rad) p -180 2 10 3 10 4 10 5 10 6 10 OFFSET FREQUENCY (Hz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 12 - 165 HMC535LP4 / 535LP4E v01.1009 PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz Typical Supply Currents vs. Voltages @ 15 GHz Output Absolute Maximum Ratings Vcc1 +5.5 Vdc Vcc1 (V) Icc1 (mA) Vcc2 +13 Vdc 4.75 156 Vcc3 +5.5 Vdc 5.0 172 Reference Input Power +13 dBm 5.25 185 Vtune 0 to +13V Vcc2 (V) Icc2 (mA) Channel Temperature 135 C 11.5 26 Continuous Pdiss (T = 85C) (derate 47 mW/C above 85C) 2.35 W Storage Temperature -55 to +125 C Operating Temperature -40 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 28 12.5 30 Vcc3 (V) Icc3 (mA) 4.75 158 5 168 5.25 180 Outline Drawing PLOS - SMT 12 12 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC535LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC535LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H535 XXXX [2] H535 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 12 - 166 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC535LP4 / 535LP4E v01.1009 PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz Pin Descriptions Function Description 1-3, 5, 6, 21-24 N/C No Connection. These pins may be connected to RF/ DC ground. Performance will not be affected. 4 Vtune VCO control voltage input. 7, 9 GND This pin must be connected to RF / DC ground. 8 RFOUT RF output (AC coupled). 10 Vcc1 VCO Supply Voltage, +5V. 11 OP-AMP OUT Op-Amp output voltage. 12 Vcc2 Op-amp Supply Voltage, +12V. 13 IN- Op-amp negative input voltage. 14 IN+ Op-amp positive input voltage. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 12 PLOS - SMT Pin Number 12 - 167 HMC535LP4 / 535LP4E v01.1009 PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz Pin Descriptions (Continued) Pin Number Function Description 15 REF PFD reference input. (This pin must be DC blocked externally) NREF PFD reference input compliment. (This pin must be DC blocked externally) 17 NU PFD not up output. 18 ND PFD not down output. 19 LD PFD lock detector output. 20 Vcc3 Digital circuitry supply voltage, +5V. Package Base GND Package bottom has an exposed metal paddle that must be connected to RF / DC ground. 16 PLOS - SMT 12 12 - 168 Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC535LP4 / 535LP4E v01.1009 PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz Application Circuit PLOS - SMT 12 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 12 - 169 HMC535LP4 / 535LP4E v01.1009 PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz Evaluation PCB PLOS - SMT 12 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and backside ground paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. 12 - 170 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC535LP4 / 535LP4E v01.1009 PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz List of Materials for Evaluation PCB 109293 [1] Description J1 - J3 PCB Mount SMA RF Connector J4 DC Pin C1, C4, C14, C16 4.7 F Tantalum Capacitor C2, C3, C5, C15 1,000 pF Capacitor, 0603 Pkg. C6, C11 0.01 F Capacitor, 0402 Pkg. C7, C8 33 pF Capacitor, 0402 Pkg. C9, C10 0.01 F Capacitor, 0603 Pkg. C12 18 pF Capacitor, 0402 Pkg. C13 0.1 F Capacitor, 0402 Pkg. C17 22 pF Capacitor, 0402 Pkg. R1, R4 432 Ohm Resistor, 0402 Pkg. R2, R3 4.02 k Ohm Resistor, 0402 Pkg. R5, R6 232 Ohm Resistor, 0402 Pkg. R7, R9 1k Ohm Resistor, 0402 Pkg. R8 620 Ohm Resistor, 0402 Pkg. R10 0 Ohm Resistor, 0402 Pkg. R11 4.42 k Ohm Resistor, 0402 Pkg. R12 549 Ohm Resistor, 0402 Pkg. R13 10 k Ohm Resistor, 0402 Pkg. R14 51 k Ohm Resistor, 0402 Pkg. R15 634 Ohm Resistor, 0402 Pkg. D1 Green LED, 0603 Pkg. Q1 MMBT3904, SOT26 Pkg. U1 HMC535LP4 / HMC535LP4E PLO U2 LM2903MX PCB [2] 109291 Eval Board 12 PLOS - SMT Item [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 12 - 171