Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FP
– EE67 –
22
FPj
Capacitance (µF)
Series identification
Lot number
Negative polarity
marking (–)
Rated voltage Mark
Mark for Lead-Free
Products Black Dot
(Square)
A±0.2
W
()Reference size
L
φD±0.5
H
B±0.2
(I)
K
(P) (I)
+
–
0.3 max.
Pressure Relief (φ10 and larger)
■Features
● Low ESR (30 % to 50 % less than FK series)
● Endurance: 2000 h at 105 °C
● Vibration-proof product is available upon request. (φ8 mm and larger)
● RoHS directive compliant
Surface Mount Type
Series: FP Type: V
FP High temperature Lead-Free refl ow (suffi x:A✽)
■Specifi cations
■Di men sions in mm(not to scale) ■Marking
Example:6.3 V 22 µF
Marking color: BLACK
(mm)
Category Temp. Range –55 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 50 V.DC
Nominal Cap. Range 10 µF to 1800 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (µA) After 2 minutes (whichever is greater)
tan δPlease see the attached standard products list
Characteristics
at Low Temperature
W.V. (V) 6.3 10 16 25 35 50
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C)222222
Z(–40°C)/Z(+20 °C)333333
Z(–55°C)/Z(+20 °C)444333
Endurance
After applying rated working voltage at +105 °C ±2 °C for 2000 hours the capacitors shall meet the
limits specifi ed below. Post-test requirement at +20 °C
Capacitance change
±30 % of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakege current
< initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ< initial specifi ed value
DC leakage current
< initial specifi ed value
Rated Voltage Mark
j6.3 V
A10 V
C16 V
Size
code DLA, B H I W P K
B 4.0 5.8±0.30 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35
- 0.20
C 5.0 5.8±0.30 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35
- 0.20
D 6.3 5.8±0.30 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
D8 6.3 7.7±0.30 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
E 8.0 6.2±0.30 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35
- 0.20
F 8.0 10.2±0.30 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.30 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
+ 0.15
+ 0.15
+ 0.15
+ 0.15
+ 0.15
Cap (µF) Frequency (Hz)
120 1 k 10 k 100 k to
10 to 470 0.65 0.85 0.95 1.00
560 to 1800 0.75 0.90 0.95 1.00
■Frequency correction factor for ripple current
E25 V
V35 V
H50 V
Sep. 201103
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FP
– EE68 –
■Standard Products
W.V. Cap.
(±20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length ✽Size
Code
Ripple
Current
(100 kHz)
(+105 °C)
E.S.R.
(100 kHz)
(+20 °C)
tan δ
(120 Hz)
(+20 °C)
Taping
(V) (µF) (mm) (mm)
(mA r.m.s.)
(액)(pcs)
6.3
22 4 5.8 B 160 0.85 0.26 EEEFP0J220AR (5) 2000
47 45.8(B)1600.85 0.26 EEEFPJ470UAR (5) 2000
55.8C2400.36 0.26 EEEFP0J470AR (5) 1000
100 55.8(C)2400.36 0.26 EEEFPJ101UAR (5) 1000
6.3 5.8 D 300 0.26 0.26 EEEFP0J101AP (5) 1000
220 6.3 5.8 D 300 0.26 0.26 EEEFP0J221AP (5) 1000
330 6.3 7.7 D8 600 0.16 0.26 EEEFPJ331XAP (5) 900
86.2E5000.18 0.26 EEEFP0J331AP (6) 1000
470 8 10.2 F 850 0.08 0.26 EEEFP0J471AP (6) 500
1000 8 10.2 F 850 0.08 0.26 EEEFP0J102AP (6) 500
1500 10 10.2 G 1190 0.06 0.26 EEEFP0J152AP (6) 500
1800 10 10.2 (G) 850 0.08 0.26 EEEFPJ182UAP (6) 500
10
22 4 5.8 B 160 0.85 0.19 EEEFP1A220AR (5) 2000
33 45.8(B)1600.85 0.19 EEEFPA330UAR (5) 2000
55.8C2400.36 0.19 EEEFP1A330AR (5) 1000
150 6.3 5.8 D 300 0.26 0.19 EEEFP1A151AP (5) 1000
220 6.3 7.7 D8 6000.160.19 EEEFPA221XAP (5) 900
86.2E5000.18 0.19 EEEFP1A221AP (6) 1000
330 8 10.2 F 850 0.08 0.19 EEEFP1A331AP (6) 500
470 8 10.2 F 850 0.08 0.19 EEEFP1A471AP (6) 500
680 8 10.2 F 850 0.08 0.19 EEEFP1A681AP (6) 500
1000 10 10.2 G 1190 0.06 0.19 EEEFP1A102AP (6) 500
1200 10 10.2 (G) 850 0.08 0.19 EEEFPA122UAP (6) 500
16
10 4 5.8 B 160 0.85 0.16 EEEFP1C100AR (5) 2000
22 45.8(B)1600.85 0.16 EEEFPC220UAR (5) 2000
55.8C2400.36 0.16 EEEFP1C220AR (5) 1000
47 55.8(C)2400.36 0.16 EEEFPC470UAR (5) 1000
6.3 5.8 D 300 0.26 0.16 EEEFP1C470AP (5) 1000
68 6.3 5.8 D 300 0.26 0.16 EEEFP1C680AP (5) 1000
100 6.3 5.8 D 300 0.26 0.16 EEEFP1C101AP (5) 1000
6.3 7.7 D8 6000.160.16 EEEFPC101XAP (5) 900
150 6.3 7.7 D8 600 0.160.16
EEEFPC151XAP (5) 900
220 6.3 7.7 D8 6000.160.16 EEEFPC221XAP (5) 900
86.2E5000.18 0.16 EEEFP1C221AP (6) 1000
330 8 10.2 F 850 0.08 0.16 EEEFP1C331AP (6) 500
470 8 10.2 F 850 0.08 0.16 EEEFP1C471AP (6) 500
680 10 10.2 G 1190 0.06 0.16 EEEFP1C681AP (6) 500
820 10 10.2 (G) 850 0.08 0.16 EEEFPC821UAP (6) 500
25
10 4 5.8 B 160 0.85 0.14 EEEFP1E100AR (5) 2000
22 5 5.8 C 240 0.36 0.14 EEEFP1E220AR (5) 1000
33 55.8(C)2400.36 0.14 EEEFPE330UAR (5) 1000
6.3 5.8 D 300 0.26 0.14 EEEFP1E330AP (5) 1000
47 6.3 5.8 D 300 0.26 0.14 EEEFP1E470AP (5) 1000
68 6.3 5.8 D 300 0.26 0.14 EEEFP1E680AP (5) 1000
100 6.3 7.7 D8 6000.160.14 EEEFPE101XAP (5) 900
86.2E5000.18 0.14 EEEFP1E101AP (6) 1000
150 8 10.2 F 850 0.08 0.14 EEEFP1E151AP (6) 500
220 8 10.2 F 850 0.08 0.14 EEEFP1E221AP (6) 500
330 8 10.2 F 850 0.08 0.14 EEEFP1E331AP (6) 500
470 10 10.2 G 1190 0.06 0.14 EEEFP1E471AP (6) 500
560 10 10.2 (G) 850 0.08 0.14 EEEFPE561UAP (6) 500
✽ Size code( ):Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J씮J, 1A씮A, 1C씮C, 1E씮E, 1V씮V
The taping dimensions are explained on EE188 of our Catalog. Please use it as a ref er ence guide.
Refl ow Profi le(Fig-1 to Fig-11) listed on EE186 of our Catalog.
Endurance : 105 °C 2000 h
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FP
– EE69 –
■Standard Products
✽ Size code( ):Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J씮J, 1A씮A, 1C씮C, 1E씮E, 1V씮V
The taping dimensions are explained on EE188 of our Catalog. Please use it as a ref er ence guide.
Refl ow Profi le(Fig-1 to Fig-11) listed on EE186 of our Catalog.
W.V. Cap.
(±20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length ✽Size
Code
Ripple
Current
(100 kHz)
(+105 °C)
E.S.R.
(100 kHz)
(+20 °C)
tan δ
(120 Hz)
(+20 °C)
Taping
(V) (µF) (mm) (mm)
(mA r.m.s.)
(액)(pcs)
35
10 4 5.8 (B) 160 0.85 0.12 EEEFPV100UAR (5) 2000
22 5 5.8 C 240 0.36 0.12 EEEFP1V220AR (5) 1000
33 6.3 5.8 D 300 0.26 0.12 EEEFP1V330AP (5) 1000
47 6.3 5.8 D 300 0.26 0.12 EEEFP1V470AP (5) 1000
68 6.3 7.7 D8 600 0.160.12
EEEFPV680XAP (5) 900
100 6.3 7.7 D8 6000.160.12 EEEFPV101XAP (5) 900
810.2F8500.08 0.12 EEEFP1V101AP (6) 500
150 8 10.2 F 850 0.08 0.12 EEEFP1V151AP (6) 500
220 8 10.2 F 850 0.08 0.12 EEEFP1V221AP (6) 500
330 10 10.2 G 1190 0.06 0.12 EEEFP1V331AP (6) 500
390 10 10.2 (G) 850 0.08 0.12 EEEFPV391UAP (6) 500
50 100 8 10.2 F 6700.180.10 EEEFP1H101AP (6) 500
220 10 10.2 G 900 0.12 0.10 EEEFP1H221AP (6) 500
Endurance : 105 °C 2000 h
Sep. 201000
