"High Frequency Ceramic Solutions" 915MHz Impedance Matched/Balun/BPF Integrated Component for T.I. P/N 0915BM15A0001 CC110X, CC111X, CC113X and CC115X, CC110L, CC113L, CC115L and CC430 Page 1 of 3 Detail Specification: 11/26/12 General Specifications Part Number Frequency (MHz) Unbalanced Impedance 0915BM15A0001 902 - 928 Mhz 50 Impedance-Matched to T.I. CC110X, CC111X, CC113X and CC115X, CC110L, CC113L, CC115L and CC430 Chipsets Balanced Impedance 5 min. @ 745 MHz 30 min. @ 1830 MHz 40 min. @ 2745 MHz 45 min. @ 3660 MHz 2.0 dB max Attenuation1 Insertion Loss Return Loss Phase Difference Amplitude Difference Power Rating Reel Quanity Operating Temperature Recommended Storage Conditions 9.5 dB min. 180 15 1.5 dB 1W max. 4,000 -40 to +85C +5 ~ +35 C, Humidity 45~75%RH, 18 months. 1 week max after opened2 Part Number Explanation Packing Style P/N Suffix Termination style Evaluation Board Bulk Suffix = S T&R Suffix = E AgPt Suffix = None 0868BM15C0001-EBSMA Terminal Configuration No. Function 1 Unbalanced Port 2 GND 3 Balanced Port3 4 Balanced Port3 5 GND 6 GND Mechanical Dimensions L W T a b c g p In 0.079 0.004 0.049 0.004 0.028 0.004 0.012 0.004 0.008 0.004 0.012 +.004/-.008 0.014 0.004 0.026 0.002 2.00 1.25 0.70 0.30 0.20 0.30 0.35 0.65 a c 1Note: mm 0.10 0.10 0.10 0.10 0.10 +0.1/-0.2 0.10 0.05 3 2 1 4 5 6 p W L eg. 0915BM15A0001S eg. 0915BM15A0001E eg. 0915BM15A0001(E or S) T g b Band Pass Filtering included 2For more info go to www.johansontechnology.com/silverleads 3Balanced ports are DC-Blocked from pins 1-2-5-6, blocking capacitor is embedded. No need for external DC-Blocking cap at GND pins or unbalanced port. www.johansontechnology.com 4001 Calle Tecate * Camarillo, CA 93012 * TEL 805.389.1166 FAX 805.389.1821 Ver 1.6 2012 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 915MHz Impedance Matched/Balun/BPF Integrated Component for T.I. CC110X, CC111X, CC113X and CC115X, CC110L, CC113L, CC115L and CC430 P/N 0915BM15A0001 Page 1 of 3 Detail Specification: 11/26/12 Mounting Considerations Mount these devices with brown mark facing up. Units: mm * Line width should be designed to provide 50 impedance matching characteristics. # Pin assignment reference 0.35 Unbalanced Solder Land Balanced 3 2 1 CC11XX CC430 * 4 5 6 Balanced 1.0 Through-hole (0.3) 0.8 -DC-Blocking capacitor embedded, no need for external DC-Block. -No need for external additional discrete filtering 0.30 Johanson Technology, Inc. reserves the right to make design changes without notice. Please confirm the specifications and delivery conditions when placing your order. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate * Camarillo, CA 93012 * TEL 805.389.1166 FAX 805.389.1821 Ver 1.6 2012 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 915MHz Impedance Matched/Balun/BPF Integrated Component for T.I. CC110X, CC111X, CC113X and CC115X, CC110L, CC113L, CC115L and CC430 P/N 0915BM15A0001 Page 1 of 3 Detail Specification: 11/26/12 Typical Electrical Characteristics (T=25C) Insertion Loss & Return Loss dB(RL_Sdd22) dB(RL_Sss11) dB(IL) 0 -10 -20 -30 -40 -50 -60 0 1 2 3 4 5 6 7 8 9 freq, GHz Amplitude & Phase Difference 180 1 90 0 0 -1 -2 0.7 -90 0.8 0.9 1.0 1.1 dif_phase dif_amplitude 2 -180 1.2 freq, GHz Johanson Technology, Inc. reserves the right to make design changes without notice. Please confirm the specifications and delivery conditions when placing your order. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate * Camarillo, CA 93012 * TEL 805.389.1166 FAX 805.389.1821 Ver 1.6 2012 Johanson Technology, Inc. All Rights Reserved