3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Interconnect Solutions
http://www.3M.com/interconnects/
data_pp (For Web PDF Output)
3MRound Conductor Flat Cable
.050″28 AWG Stranded, PVC 3667 Series
SCombines the routing ease of discrete wire
round cable with the mass termination
capabilities of a ribbon cable
SSplit conductor sections allow for easy routing
SOne inch bonded cable sections of 28 AWG
wire on .050 inch centers permit termination to
our broad line of IDC connectors
SZippable for branching or discrete termination
SSplit-bond lengths can be varied, see Note 2 in
Ordering Information
S*RoHS compliant
TS-0247-13
Sheet 1 of 2
Date Modified: May 24, 2004
Physical
Insulation
Material: Polyvinyl Chloride (PVC)
Color: Gray
Marking
Standard: None
Canadian Option: AWM 2651 105C 300V VW1 3M NU CAWM IA 105C 300V FT1
EU <50V
Conductors: 28 AWG 7 ×36 [ 7 ×0.127 ] Tinned Stranded Copper
Electrical
Voltage Rating: USA: 300V Canada: 300V EU: <50V
Insulation Resistance: >1×1010 Ω/10 ft. [ 3 m ]
Characteristic Impedance: Unbalanced: 112 Ω
Capacitance: Unbalanced: 12.7 pF/ft. [ 41.5 pF/m ]
Inductance: Unbalanced: .16 µH/ft. [ 0.52 µH/m ]
Propagation Delay: Unbalanced: 1.42 ns/ft. [ 4.66 ns/m ]
Velocity of Propagation: Unbalanced: 72%
Note: Unbalanced is measured between ground-signal-ground conductors.
Environmental
Temperature Rating: -- 2 0 °C to +105°C
Flammabality Rating: USA: VW-1 Canada: FT1
*RoHS = Directive 2002/95/EC,
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
UL File No.: E42769, Style No.: 2651
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Interconnect Solutions
http://www.3M.com/interconnects/
data_pp (For Web PDF Output)
3MRound Conductor Flat Cable
.050″28 AWG Stranded, PVC 3667 Series
Number of
Conductors
3M Part
Number
Dimension A
(See Note 2)
Dimension B
(See Note 2)
10 3667/10 .500 ±.010 [12.70 ] .450 ±.007 [ 11.43 ]
14 3667/14 .700 ±.010 [ 17.78 ] .650 ±.007 [ 16.51 ]
16 3667/16 .800 ±.015 [ 20.32 ] .750 ±.011 [ 19.05 ]
20 3667/20 1.000 ±.015 [ 25.40 ] 0.950 ±.011 [ 24.13 ]
24 3667/24 1.200 ±.015 [ 30.48 ] 1.150 ±.011 [ 29.21 ]
25 3667/25 1.250 ±.015 [ 31.75 ] 1.200 ±.011 [ 30.48 ]
26 3667/26 1.300 ±.015 [ 33.02 ] 1.250 ±.011 [ 31.75 ]
30 3667/30 1.500 ±.020 [ 38.10 ] 1.450 ±.015 [ 36.83 ]
34 3667/34 1.700 ±.020 [ 43.18 ] 1.650 ±.015 [ 41.91 ]
36 3667/36 1.800 ±.020 [ 45.72 ] 1.750 ±.015 [ 44.45 ]
37 3667/37 1.850 ±.020 [ 46.99 ] 1.800 ±.015 [ 45.72 ]
40 3667/40 2.000 ±.020 [ 50.80 ] 1.950 ±.015 [ 49.53 ]
44 3667/44 2.200 ±.020 [ 55.88 ] 2.150 ±.015 [ 54.61 ]
50 3667/50 2.500 ±.020 [ 63.50 ] 2.450 ±.015 [ 62.23 ]
60 3667/60 3.000 ±.020 [ 76.20 ] 2.950 ±.015 [ 74.93 ]
64 3667/64 3.200 ±.020 [ 81.28 ] 3.150 ±.015 [ 80.01 ]
Variable Length Suffix Table
Example of variable bond and flat repeats
Suffix Repeat Bond
MO 6.50 1.50
SV 9.50 1.00
BU 13.00 1.00
A
B
.035 ±.003
[0.89]
Split
TS-0247-13
Sheet 2 of 2
Ordering Information 3667/XX XX
Blank = Standard
C = Canadian Certified Version Number of Conductors
(See Table)
Notes:
1. Available in standard lengths of 100 feet or 300 feet per roll, please specify when ordering.
2. Standard product has a split-bond repeat length of 2.4 inches (6.1 cm) with a 1.0 inch (2.5 cm) bonded section. The split-bond
repeat length can be specified up to 24 inches (61.0 cm). The minimum split or bonded length is 1/2 inch (1.3 cm).
3. For special requirements, contact your 3M sales representative.
28 AWG 7 X 36 [ 7 X 0.127 } Tinned
Stranded Copper Conductors
.025 ¦.007
[0.64]
.050 ¦.002 Typ
[1.27]
PVC Insulation
2.4 ¦.25
[61]
Note:
1. Red marking on one edge of cable designates wire #1.
2. A&Bdimensionspertaintobonded areas only.
Inch
[mm]
±.005±.1 ±.01
Tolerance Unless Noted
.0 .00 .000
Inch
[ ] Dimensions for
Reference only
Split-bond lengths can be varied, see
Note 2 in Ordering Information below.
(OPTIONAL)
1.0
[25]
+.25
-.13
Bonded
Variable Length
(See variable length suffix table)
© 3M 2004
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/esd
Important Notice
All statements, technical information, and recommendations related
to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using
this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability
associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order shall have
no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for a period of 1 year from the date of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this pr oduct is defective within the
warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or r epair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any loss or damage arising from
this 3M product, whether direct, indirect, special, incidental or
consequential regardless of the legal theory asserted.
