CATALOG 128_CATALOG 128.qxd 4/24/2014 10:29 AM Page 51 EIA -Based VectorPaktm Subrack Systems Rack Accessories "P" Type Side Panel Material: 0.080" aluminum with clear irridite finish Part No. Overall Height A Depth B Vector Handle Accepts Max Card Height Rack Units (H) SW34P89/90 SW34P119/90 SW34P156/90 SW52P89/90 SW52P119/90 SW52P156/90 SW69P89/90 SW69P119/90 SW69P156/90 SW87P89/90 SW87P119/90 SW87P156/90 SW104P89/90 SW104P119/90 SW104P156/90 SW122P156/90 SW122P202/90 SW157P119/90 3.48" 3.48" 3.48" 5.23" 5.23" 5.23" 6.98" 6.98" 6.98" 8.73" 8.73" 8.73" 10.47" 10.47" 10.47" 12.22" 12.22" 15.72" 9.0" 12.0" 15.75" 9.0" 12.0" 15.75" 9.0" 12.0" 15.75" 9.0" 12.0" 15.75" 9.0" 12.0" 15.75" 15.75" 20.25" 12.0" HA13 HA13 HA13 HA12 HA12 HA12 HA13 HA13 HA13 HA12 HA12 HA12 HA12 HA12 HA12 HA12 HA12 HA19-9U 2.75" 2.75" 2.75" 4.5" 4.5" 4.5" 6.25" 6.25" 6.25" 8.0" 8.0" 8.0" 9.75" 9.75" 9.75" 11.5" 11.5" 15.0" 2U 2U 2U 3U 3U 3U 4U 4U 4U 5U 5U 5U 6U 6U 6U 7U 7U 9U Modules or Front Panel Mounting Hardware SC 10-2A Thumb screws and SC10-3A jack screws (supplied with EFP modules, Cardmount modules and front assemblies to T-struts. SP09-2 spacers are used as standoffs for mounting modules to 1" T-struts (1.79" struts are standard with module subracks.) Description Part No. SP09-2 SC10-2A SC10-3A Pkg Qty Hex spacer for module mounting, includes hardware Thumb screw fully threaded for direct attachment of panels Jack screw for mounting modules to T-struts with jacking action 12 12 12 Bottom Hinged Front Panels - HFP52-1 Top and Bottom Card Rack Covers CAC1, CAC2, CAC3 These are designed for use as a front "drop-down" panel with lanyard for holding the panel at 90o. Provides a work surface and prevents damage to equipment. Comes complete with hardware and full instructions. Panels are 1/8" thick brushed aluminum with clear irridite finish. Two 1/16" thick aluminum covers with clear irridite finish provide protection over and under the card area, is designed to snap into opposing groves in the horizontal TStrut rails. Rear panels CRK3, CRK5, CRK7 includes attachment hardware for mounting onto Vectorpak P-type sidepanels are easy to customize. CAC1 and CRK3 Use With Rack Size Height Width Depth (Actual wall height) 3U 3U 3U 4U 4U 5U 5U 5.23" 5.23" 5.23" 6.98" 6.98" 8.73" 8.73" 19.00" 19.00" 19.00" 19.00" 19.00" 19.00" 19.00" Bottom Hinged Front Panels (w/L20 lanyard) Rear Panels Top / Bottom solid Covers HFP52-1 HFP52-1 HFP52-1 HFP69-1 HFP69-1 HFP87-1 HFP87-1 CRK3 CRK3 CRK3 CRK5 CRK5 CRK7 CRK7 CAC1 CAC2 CAC3 CAC2 CAC3 CAC2 CAC3 9.00" 12.00" 15.75" 12.00" 15.75" 12.00" 15.75" www.vectorelect.com EIA Subracks THE FOLLOWING ACCESSORIES ARE NOT COMPATIBLE WITH CCE-STYLE ENCLOSED RACKS ON THE PREVIOUS PAGE CCA13S with HFP52-1 Rack Flange Rack Handles Dress Panels (Sold as pair) (3" wide) FP52-2 FP52-2 FP52-2 FP69-2 FP69-2 FP87-2 FP87-2 800-423-5659 HA12 HA12 HA12 HA13 HA13 HA12 HA12 51 7 8 6 4 5 2 3 1 REVISIONS A 0.920 1.055 EQ. SP @ .750 01 0.867 0.195 0 1.055 0.920 02 0.650 0.015 0.328 0.015 0 SW34P89 SHOWN A EQ. SP @ .750 1.055 0.920 01 +0.005 5.234 - 0.020 4.742 02 3.742 CL 0.662 0 0.492 0 0.650 0.015 0.328 0.015 0 DETAIL NO. 2 01 02 B CL 0.662 0 0 DETAIL NO. 4 SW87P89 SHOWN 02 01 02 02 10.235 02 01 02 CL 9.660 CL 7.860 02 CL 6.061 5.485 3.360 D 0.920 EQ. SP @ .750 +0.005 10.470 - 0.020 CL 9.808 8.985 1.485 CL 0.662 0 0 03 SLOTS DETAIL NO. 6 0 CL 7.710 7.360 6.735 3.735 3.110 CL 2.760 1.485 CL 0.662 0 0.650 0.015 0.328 0.015 0 SW69P89 SHOWN 5. INSIDE BEND RADIUS: .187 DETAIL NO. 5 SW104P89 SHOWN UNLESS OTHERWISE SPECIFIED: 4. GRAIN FINISH DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ANGULAR: .5 TWO PLACE DECIMAL .03 THREE PLACE DECIMAL .010 3. FINISH: SATIN ETCH, 7 MIN., CHEM., FILM, CLEAR CLASS 1A, IAW MIL-C-5541 2. MATL: AL. ALLOY, 5005-H34, .080 THK., PRE - ANOD. ,P/N: 0030-55-31 INTERPRET AS PER: ASME Y14.5M 1994 PROPRIETARY AND CONFIDENTIAL 1. REMOVE ALL BURRS AND SHARP EDGES NOTES: UNLESS OTHERWISE SPECIFIED THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF <INSERT COMPANY NAME HERE>. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF <INSERT COMPANY NAME HERE> IS PROHIBITED. 7 03 SLOTS TYP SW157P119/90 SHOWN C 0 6. K =.185 8 E CL 4.710 CL 0.662 0 DETAIL NO. 3 14.235 CL 5.760 CL 2.549 0 EQ SP @ .750 CL 4.261 03 SLOTS CL 4.435 1.945 1.492 F CL 11.459 02 CL 6.322 5.492 5.039 04/14/94 INCORPORATED ECO 4078 REDRAWN, CHANGES IN DETAIL NO. 5 08/05/05 ADDED DETAIL 6 01/11/12 CL 2.462 +0.005 6.984 - 0.020 C 01 CL 2.515 1.055 0.920 09/14/93 12.360 SW52P89 SHOWN A EQ. SP @ .750 01/02/91 CL 13.259 A 1.055 02 02 0.650 0.015 0.328 0.015 0 1.492 02 0.650 0.015 0.328 0.015 02 1.492 CL 4.572 CL 2.617 A CL 6.219 2.242 01 03/14/86 15.720 CL 15.058 3.242 03 SLOTS APPROVED A 0.920 5.492 02 REDRAWN, ECO 3028 INC ECO 3924 REVISED AND REDRAWN, N/C 1.055 CL 4.367 E 01 6.492 02 DATE DESCRIPTION CL 8.072 7.242 01 D 03 SLOTS +0.005 8.734 - 0.020 CL 0.662 0 DETAIL NO. 1 EQ. SP @ .750 0.600 0.328 0 01 02 A 0.3 12 0.3 THRU FAR 95 X AL SID 100 L E F 3.289 2.617 G H H H1 H2 I 03 SLOTS +0.005 3.484 - 0.020 CL 2.822 REV. 2x 02 ZONE 6 5 4 3 USED ON NEXT ASSY APPLICATION 2 MATERIAL 2 FINISH 3 DRAWN CHECKED ENG APPR. MFG APPR. Q.A. COMMENTS: VECTOR ELECTRONICS & TECHNOLOGIES INC. NORTH HOLLYWOOD, CA NAME DATE A.SAH 08/05/05 TITLE: SIDE WALL P-TYPE, STANDARD SIZE DWG. NO. D M4424D5.11 SCALE: 1:2 1 WEIGHT: REV I SHEET: 1 OF 1 A Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vector: BR64A/12 SW52P89/90 NT4-7PA SW52P156/90 SW52P119/90 SC10-2A SP09-2 SC10-3A SC4-27/25 SC4-28