2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304
Revised in 06/071
E & E Magnetic Products Limited
1000 Base-T Applications
Single Port, Through Hole, Tab Down
Zigzag Output Pins Pattern (8 cores designs)
Magnetic Integrated Connector Modules
1500Vrms isolation voltage per IEEE802.3
Compliant with IEEE802.3 standard including 350µH OCL
with 8mA DC Bias
Enhanced performance on EMI suppression with metal shield
oo
Operating temperature 0 C to +70 C
RoHS compliant versions are available
UL 1863 listed
Support 4 pairs fo Category 5 UTP cable with
1000Base-T full duplex applications
MJ116(05)
GENERAL ELECTRICAL SPECIFICATION @ 25°C
Insertion Loss
(dB Max)
Return Loss
(dB Min)
CMRR
(dB Min)
0.1-100MHz
Crosstalk
(dB Min) Hipot
(Vrms)
0.5-40MHz 40-100MHz 0.1-100MHz 0.1-100MHz
1.0 1.2 18.0 12-20Log(F/80) 32.0 33-20Log(F/50) 1500
100-125MHz
1 1
PART NUMBER TABLE
Part Number
1CT:1CT
1CT:1CT
1CT:1CT
1CT:1CT
1CT:1CT
RoHS Part Number LED
(Left / Right)
Configuration Mechanical
Package Schematic
MJ11D-04ATC
TC
TC
TC
TC
G / Y
G / Y
G / Y
G / Y
G / Y MJ11D-04A
MJ11D-04A
MJ11D-04B
MJ11D-04B
2
4
Turn Ratio ( 3%)
(Chip : Cable)
1CT:1CT TC G / Y MJ11D-04B
3
1CT:1CT TC —MJ11D-04C
TC MJ11D-04C
1. “F” represents the test frequency specified in MHz.
Notes:
2. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.
3. Core location are counted from PCB (Chip) side to Cable (Media) side, where:
"T" = Isolation transformer ; "C" = Common-mode choke .
E&E Magnetic Products Limited.
5. Panel tabs are optional.
6. All parts shown in this datasheet have gold plating thickness of 10 micro-inch (min.) over contact area.
Advance options including 30 micro-inch (min.) and 50 micro-inch (min.) are also available.
4. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; "—" = None. For different LED color requirements, please contact
1CT:1CT
1CT:1CT
MJ-11D2GYA0-G100
MJ-11D2GYA0-G101
MJ-11D2GYA0-G114
MJ-11D2GYA1-G100
MJ-11D2GYA1-G101
MJ-11D2GYA1-G114
MJ-11D2NNA0-G100
MJ-11D2NNA0-G101
MJ-11D2NNA0-G114 TC MJ11D-04C
G100
G101
G114
G100
G101
G114
G100
G101
G114
MJR11D2GYA0-G100
MJR11D2GYA0-G101
MJR11D2GYA0-G114
MJR11D2GYA1-G100
MJR11D2GYA1-G101
MJR11D2GYA1-G114
MJR11D2NNA0-G100
MJR11D2NNA0-G101
MJR11D2NNA0-G114
—
—
—
2
MECHANICAL DIMENSIONS
MJ11D-04A
E & E Magnetic Products Limited
Revised in 06/07
2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304
All dimensions are specified in with higher precedence in inch.
Unless otherwise specified, all tolerances are .
inch
mm 0.010
0.25
MJ11D-04B
Chip side
Cable side
REFERENCE OR
GAUGE PLANE
NOTE 5
MJ116(05)
LED (LEFT) LED (RIGHT)
0.450
11.43
0.620
15.75
0.450
11.43
0.100
2.54
0.050
1.27
0.120
3.05
0.085
2.16
0.100
2.54
0.250
6.35
2468
137
5
10
9
11 12 13 14
0.522
13.26
0.322
8.18
0.160
4.06
0.062
1.57
DIA:
2X
0.126
3.20
DIA:
2X
0.035
0.89
DIA:
10X
0.042
1.07
DIA:4X
0.855
21.72
0.425
10.80
0.125
3.18
MAX.
0.555
14.10
0.640
16.26
J1 J8
MAX.
MAX.
(E&E P/N)
(DATE)
UURR
R
C
US
Recommended hole pattern
viewed from component side
0.042
1.07
DIA:4X
0.450
11.43
0.620
15.75
0.450
11.43
0.100
2.54
0.050
1.27
0.120
3.05
0.085
2.16
0.100
2.54
0.250
6.35
2468
137
5
10
9
0.062
1.57
DIA:
2X
0.126
3.20
DIA:
2X
0.035
0.89
DIA:
10X
0.555
14.10
J1 J8
0.640
16.26 MAX.
MAX.
11
12
13
14
0.133
3.38
0.193
4.90
0.298
7.57
0.498
12.65
0.125
3.18
0.425
10.80
0.855
21.72 MAX.
LED (LEFT) LED (RIGHT)
(E&E P/N)
(DATE)
UURR
R
C
US
Recommended hole pattern
viewed from component side
REFERENCE OR
GAUGE PLANE
Chip side
Cable side
NOTE 5
1000 Base-T Applications
Single Port, Through Hole, Tab Down
Zigzag Output Pins Pattern (8 cores designs)
3
MECHANICAL DIMENSIONS
MJ11D-04C
E & E Magnetic Products Limited
Revised in 06/07
2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304
Chip side
Cable side
REFERENCE OR
GAUGE PLANE
NOTE 5
MJ116(05)
0.450
11.43 0.620
15.75
0.450
11.43
0.100
2.54
0.050
1.27
0.120
3.05
0.085
2.16
0.100
2.54
0.250
6.35
2468
137
5
10
9
0.062
1.57
DIA:
2X
0.126
3.20
DIA:
2X
0.035
0.89
DIA:
10X
0.855
21.72
0.425
10.80
0.125
3.18
MAX.
0.555
14.10
0.640
16.26
J1 J8
MAX.
MAX.
(E&E P/N)
(DATE)
UURR
R
C
US
Recommended hole pattern
viewed from component side
All dimensions are specified in with higher precedence in inch.
Unless otherwise specified, all tolerances are .
inch
mm 0.010
0.25
MATERIALS
Housing
PCB Pins
Contact Pins
Consist of thermoset & thermoplastic materials, all of them are UL 94-V0 rated.
Copper wire which meets solderability requirements per MIL-STD-202, method 208.
Phosphor bronze, plated with nickel under-plating and hard gold over contact area.
6
1000 Base-T Applications
Single Port, Through Hole, Tab Down
Zigzag Output Pins Pattern (8 cores designs)
4
G100
E & E Magnetic Products Limited
Revised in 06/07
2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304
G101
G114
MJ116(05)
J7
Shield
1000pF/2000V
75Ω
RJ-45
Cable Side
1CT:1CT
J8
J2
J1
J3
J5
J4
J6
75Ω
1CT:1CT
75Ω
1CT:1CT
75Ω
1CT:1CT
RJ-45
Chip Side
2
3
4
8
9
10
MDI_3-
MDI_2+
MDI_1+
MDI_1-
MDI_0-
MDI_3+
5
6
7
MDI_2-
1
MDI_0+
Secondary
Primary
SCHEMATICS
1000 Base-T Applications
Single Port, Through Hole, Tab Down
Zigzag Output Pins Pattern (8 cores designs)
J7
Shield
1000pF/2000V
RJ-45
Cable Side
RJ-45
Chip Side
1CT:1CT
J8
J2
J1
J3
J5
J4
J6
1CT:1CT
75Ω
1CT:1CT
1CT:1CT
9
10
7
3
2
1
MDI_0-
MDI_1+
MDI_3+
MDI_3-
MDI_0+
6
5
4
MDI_1-
MDI_2+
MDI_2-
8
75Ω
75Ω
75Ω
Primary
Secondary
J1
J2
J3
J4
J5
J6
J7
J8
1
2
3
4
5
6
7
8
9
10
Shield
MDI_0-
MDI_2+
MDI_1-
MDI_3-
MDI_0+
MDI_1+
MDI_2-
MDI_3+
0.1uF
1000pF/2000V
1CT:1CT
75Ω
RJ-45
Chip Side
1CT:1CT
1CT:1CT
1CT:1CT
0.1uF
0.1uF
0.1uF
75Ω
75Ω
75Ω
Primary
RJ-45
Cable Side
Secondary
E & E Magnetic Products Limited
5 Revised in 06/07
2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304
FOR MORE INFORMATION, PLEASE CONTACT
HEADQUARTER
2/F Block A, Merit Industrial Centre,
94 Tokwawan Road, Kowloon,
Hong Kong
Tel: (852) 2765 3888
Fax: (852) 2954 3304
Email: eempl@eleceltek.com
Website: http://www.eleceltek.com
Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect
of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company
does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 2006, E & E Magnetic Products Limited.
LEDS COLOR AND POLARITY
LED (RIGHT)
LED (LEFT)
MJ11D-04A LED (LEFT) LED (RIGHT)
COLOR COLOR
POLARITY POLARITY
PIN 11 PIN 12 PIN 13 PIN 14
GREEN YELLOW
13
14
11
12
LED SPECIFICATION @25 FORWARD CURRENT = 20mA°C,
Standard Color Typical Wavelength (nm) Forward Voltage (volt)
Green
Yellow
565
590
2.2
2.1
2.5
2.5
Typical Maximum
LEDS COLOR AND POLARITY
LED (RIGHT)
LED (LEFT)
MJ11D-04B LED (LEFT) LED (RIGHT)
COLOR COLOR
POLARITY POLARITY
PIN 11 PIN 12 PIN 14 PIN 13
GREEN YELLOW
11
12
13
14
MJ116(05)
1000 Base-T Applications
Single Port, Through Hole, Tab Down
Zigzag Output Pins Pattern (8 cores designs)
