PAGE . 1
March 14,2012-REV.08
UF1A SERIES
FEATURES
• For surface mounted applications
• Low profile package
• Built-in strain relief
• Easy pick and place
• Ultrafast recovery times for high efficiency
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
• Glass passivated junction
• Lead free in comply with EU RoHS 2002/95/EC directives
MECHANICAL DAT A
• Ca se: JEDEC DO-214AA molded pla stic
• Termin als: Solder plated, solderable per MIL-STD-750,Method 2026
• Polarity: Color band denotes cathode end
• Standard packaging: 12mm tape (EIA-481)
• Weight: 0.0032 ounce, 0.092 gram
SURF ACE MOUNT ULTRAFAST RECTIFIER
MAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
NOTES:1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and applied Vr = 4.0 volts.
3. 8.0 mm2 ( .013mm thick ) land areas.
VOLTAGE 50 to 1000 V olts CURRENT 1 Amperes
12
Cathode Anode
PARAMETER SYMBOL UF1A UF1B UF1D UF1G UF1J UF1K UF1M UNITS
Maximum Recurrent Peak Reverse Voltage V
RRM
50 100 200 400 600 800 1000 V
Maximum RMS Voltage V
RMS
35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage V
DC
50 100 200 400 600 800 1000 V
Maximum Average Forward Current at T
L
=100
O
CI
F(AV)
1A
Peak Forward Surge Current : 8.3ms single half sine-wave
superimposed on rated load (JEDEC method) I
FSM
30 A
Maximum Forward Voltage at 1.0A V
F
11.31.7V
Maximum DC Reverse Current at Rated DC Blocking
Voltage T
J
=25
O
C
T
J
=125
O
CI
R
1
150 μA
Typical Junction Capacitance (Note 2) C
J
17 pF
Typical Thermal Resistance (Note 3) R
θJL
30
O
C / W
Maximum Reverse Recovery Time (Note 1) t
rr
50 100 ns
Operating Junction and Storage Temperature Range T
J
,T
STG
-55 to +150
O
C
0.083(2.11)
0.075(1.91)
0.185(4.70)
0.160(4.06)
0.096(2.44)
0.083(2.13)
0.050(1.27)
0.030(0.76)
0.220(5.59)
0.200(5.08)
0.012(0.305)
0.006(0.152)
0.155(3.94)
0.130(3.30)