Amphenol
Amphenol-Tuchel Electronics GmbH
heavy
|
mate ®
Heavy Duty Connectors
www.industrial-amphenol.com
2
Note from the CEO
Ladies and Gentlemen,
For over 75 years Amphenol has enjoyed success as the interconnection technology
provider of choice to industry-leading companies around the world. One of our key stra-
tegic areas of focus has been and is the Industrial market. Our organization works with
leading manufacturers across a wide range of applications - including Energy Generation
& Distribution, Transportation, Heavy Equipment, Factory Automation, Wireless Outdoor,
ChipCard Readers - enabling smarter, faster and better technologies to connect pro-
ducts to customer solutions.
The Industrial market footprint of Amphenol covers over facilities in more than 12
different European countries and more than 30 countries worldwide. Our successful
expansion into new regions as well as new industrial applications is a direct reflection of
our agile, entrepreneurial management team and our unwavering commitment to execu-
te Amphenol‘s strategies for the benefit of our customers, shareholders and employees.
Thank you for partnering with Amphenol. Our entire organization is at your service.
R. Adam Norwitt
President and CEO, Amphenol Corporation
3
Make use of the best
Use our global resources
“Think global, act local!” Independently from where you are in Europe, we offer
you our global expertise and great variety of products and technologies. And in
comfort with your personal contact. Our numerous European offices are your
access to our global resources.
OUR OFFICES IN EUROPE AND WORLDWIDE
OUR OFFICES IN EUROPE AND WORLDWIDE
FRANCE CHINA AUSTRALIA SOUTH AFRICA
FRANCE CHINA AUSTRALIA SOUTH AFRICA
GERMANY KOREA MEXICO INDIA
GERMANY KOREA MEXICO INDIA
UNITED KINGDOM TAIWAN USA ITALY
UNITED KINGDOM TAIWAN USA ITALY
4
SECURITY, RELIABILITY AND COMFORTABLE SERVICE FROM ONE SOURCE.
5
More time for important things:
benefit from our service and diversity
Enjoy security, reliability and comfortable service from one source.
INDUSTRIAL@AMPHENOL offers one of the most individual and most diversified service
programmes in the market – exclusively for industrial customers. Access all possibilities of
the Amphenol group through your personal expert adviser.
WIDE PRODUCT RANGE
WIDE PRODUCT RANGE
Take advantage of a choice of Amphenol products. Our broad
product portfolio offers individual solutions from more than 85
member companies in the global Amphenol group.
QUALITY
QUALITY
Interconnect systems need reliability, speed and flawless data
transmission. We continuously test and guarantee the required
standard in our products – and also in our personal services.
SPEED AND AVAILABILITY
SPEED AND AVAILABILITY
Smart and intelligent processes are the secret behind our service
programme. Flexible planning and distribution, perfect logistics and
highest availability are our key factors for best customer service.
EXCLUSIVENESS AND FLEXIBILITY
EXCLUSIVENESS AND FLEXIBILITY
One face to the customer: every inquiry is handled on an individual
service level by your personal key account service partner. This
ensures maximum transparency and best-in-class flexibility in the
whole process.
INDIVIDUAL SOLUTIONS
INDIVIDUAL SOLUTIONS
Your project requires an individual solution that is not available off-
the-shelf? As your think tank and discussion partner we provide
engineering support and solution-oriented development for your
tailor-made Amphenol product.
GLOBAL KEY ACCOUNT SERVICE
GLOBAL KEY ACCOUNT SERVICE
Our key account service is your individual entrance to global
know-how, products and services. More than 85 Amphenol
companies around the world offer an extensive range of
technologies and products. We offer access to our worldwide
resources through one individual contact person.
6
heavy
|
mate® is a modular connector line, consisting of:
• Hoods & Housings
• Inserts
• Contacts
What is heavy
|
mate® ?
• Connections in harsh industrial environment
• Robust design necessary
• High number of poles or different kinds of signals transmitted
• Very good EMC protection required
• Power and signal transmission outdoor
• Very save locking system required
Why heavy
|
mate® ?
heavy
|
mate® is a Modular Metal Connector Line
7
• Hybrid interconnections
• Good costs
• Voltage up to 1000V
• VDE, UL, CSA approvals
• Vibration proof
• High current
• Signal transmission
• High pole sizes
• IP65 to IP68
• Corrosion resistance
• Robust
Major product features
• Connectors for industrial applications indoor & outdoor
• A wide range of inserts for signal and power transmission
• A large variety in pole sizes from 3 up to 280 poles per connector
• Current ratings up to 250A per contacts and voltages up to 1000V
• A modular connector system to configure customized solutions
What can heavy
|
mate® offer?
for Applications in Industrial Environments.
8
• Select an insert that meets your requirements.
• Choose the related contacts if not included in inserts.
• Choose related housings.
• Choose related cable gland.
• If you are interested in a cable assembly, please ask us.
Theory
Requirements
• 250V
• 5A
• 60 contacts
• Termination: crimp
Solution
• Check: Make a pre-selection on the overview page of the series, s. p. 10/11
Possible series:
heavy
|
mate®
D, DD and M
• Check: Details on the overview pages of the sub-series, see
pages
22, 38, 114
All 3 variants are possible; Selection heavy
|
mate® D
• Check: Contact inserts on the detail page of the sub-series
Selection: C146 10A064 000 2
• Check: Contacts on the same double page
Selection: VN01 016 0002 1
• Check: Housings via crosslink at contact inserts
Selection: C146 21R024 600 8
• Check: Gland bushing via crosslink at housings
Selection: VN16 320 0126X
Practice 1
How to select a solution with series heavy
|
mate®.
9
Requirements
• 3 x 400V; 50A; 6mm² wire gauge
• 8 x 250V; 8A; 1.5mm² wire gauge
• 5 x 400V; 15A; 4mm² wire gauge
Solution
• Check: Make a pre-selection on the overview page of the
series, see pages 10/11
Possible series: heavy
|
mate® M
• Check: How 16 contacts can be realized, see modules
overview on page 118
Possible selection: a) 1 x 20 contacts
b) 2 x 10 contacts
c) 1 x 10 contacts + 1 x 5 contacts
d) 1 x 3 contacts + 1 x 5 contacts +
1 x 10 contacts
• Check: Technical parameters / solution, see detail pages
of the modules on page 126
Possible selection: a) not possible due to voltage
b) not possible due to voltage
c) not possible due to current
d) POSSIBLE
• Check: Choose matching contact, see detail page of the
modules on page 126
Possible selection: a) C146 A03 001 E8 – VN01 036 0002 1C
b) C146 A0 001 E8 – VN01 025 0033 1C
c) C146 A10 001 E8 – VN01 016 0027 1XC
• Check: Choose matching frame, see frames on page 124
Solution: C146 P10 001 G8
• Check: Choose matching housing, see housings on page 162
Solution: C146 21R010 600 8
Practice 2
10
Series
Characteristic
A
page 14
D
page 22
DD
page 38
E
page 44
EE
page 62
E /FE / KO
page 68
F
page 74
Voltage
250V •••••••
400V • ••••
500V •• •
690V •
830V •
1000V
Current
10A •••••••
16A ••••
35A •
80A •
100A
200A
Numbers of contacts Modules for
3
4
10
16
7
8
15
25
40
64
24
42
72
108
6
10
16
24
10
18
32
46
6
10
16
24
3
6
8
12
17
20
Termination
Crimp •••• •
Screw •••
Tension spring •
Make your selection out of the heavy
|
mate® series!
Cross reference list see www.amphenol.de/xref/
11
HSE
page 94
HvE
page 98
K
page 108
M
page 114
Q
page 156
Housings
page 162
Accessories
page 223
Series
Characteristic
Voltage
••••• 250V
••••• 400V
•••• 500V
••• 690V
•• 830V
•1000V
Current
••••• 10A
••••• 16A
••• 35A
•• 80A
•100A
•200A
Modules for Numbers of contacts
6 3+2
6+2
10+2
16+2
4 / 0
4 / 2
6 /36
1
2
3
4
5
10
20
5
7
Termination
••• Crimp
••• Screw
Tension spring
12
• Turned contacts, which correspond to the market standard.
• Turned female contacts of copper for higher current-carrying
capacity – specifically for the modular system heavy
|
mate® M.
• Radsok contact technology: These are laminated contacts
with very low transition resistance, suitable for high current
applications.
• Stamped contacts with high performance for semi-automatic
processing at great cost savings.
• Selectively coated gold plating stamped contacts offer great
savings.
Contact technology
Surface coatings available in
two versions:
Standard or High-End with a
salt mist resistance up to
500 hours.
Housings
The highlights of the series heavy
|
mate®.
tance
u
p
to
t
t
o
o
o
o
o
o
Tightness classes
in IP65, IP67 or
IP68!
Quality
EMC solutions.
Flexible cable entry in
different positions
– possible on request.
Robust metal levers
in 1 and 2 locking-
lever-system.
13
With the new series
heavy
|
mate
®
F Amphenol offers a new
modular system that is compatible with the market leader.
With the series
heavy
|
mate
®
M Amphenol offers a system with
many benefits:
• More module slots in the connector.
• Large selection of contact-safe male contacts
• Stamped contacts and the Radsok contact technology
• Great cost savings potential
Modular system
14
• Rated voltage 250 / 400 V
• Rated current 14 A ... 18 A
• Termination: screw
• Number of contacts: 3, 4, 10, 16, 32
heavy
|
mate® A
15
Approvals, Testhouse Characteristics Approval-Number
SEV 250 V, 10 A
UL 600 V, 14 A E 63093
CSA 600 V, 10 A; 16 A; 20 A LR 700721
In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request.
heavy
|
mate® A Brief information
16
Range of housings
Size A3/4 Size A10 Size A16
heavy
|
mate® A General information
General information
• For series heavy
|
mate® A connectors may be engaged or
disengaged when live but without electrical load.
If these connectors are used as plug and socket device, the load
shall be reduced to 10 % of the rated current.
• Low and high profile housing for heavy
|
mate® A series inserts for
10 and 16 contacts.
No standard for this series, but:
• Interchangeable with other makes
a) contact insert to contact insert
b) contact insert to housing 10 ,16 contacts
Housings are designed according to DIN EN 175 301 - 801
First-to-mate last-to-break protective ground contact
17
heavy
|
mate® A Characteristics contact inserts
IP-degree of protection on termination side of screw version IP 10
General Characteristics Standard Value
Number of contacts 3/4 + 10 + 16 + 32 +
Termination technique screw
Wire gauge 0.25 - 2.5 mm2
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 400 V 250 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 III b
Rated impulse withstand voltage IEC 60664-1 4 KV
Current carrying capacity IEC 60512-5-2 see derating curves
Rated current Tamp = 40 °C 18 A 16 A 14 A 14 A
Contact resistance IEC 60512-2-1 ≤ 5 m Ω
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 100 / 21
Upper temperature IEC 60512-11-9 + 100 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
IP-degree of protection pin insert 1) IEC 60529 unmated IP00 mated IP20
IP-degree of protection socket insert 1) IEC 60529 unmated IP20 mated IP20
Weight pin insert 13 g 48 g 68 g 136 g
Weight socket insert 13 g 52 g 73 g 146 g
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Insert PA PBT PBT PBT
Contacts Cu Zn (brass)
Contact plating Ag (silver)
18
heavy
|
mate® A Contact inserts 3 - 4 + | Size A3/4 | 400 V/10 A Housings from page 162
Description Part Number Drawing Figure
Contact insert 3 +
Male insert
for screw termination
C146 10A003 002 4
Female insert
for screw termination
C146 10B003 002 4
Pin layout
Male insert Female insert
Description Part Number Drawing Figure
Contact insert 4 +
Male insert
for screw termination
C146 10A004 002 4
Female insert
for screw termination
C146 10B004 002 4
Pin layout
Male insert Female insert
Derating curves
Curve
Wire gauge
a1.5 mm
2
b2.5 mm
2
19
heavy
|
mate® A Contact inserts 10 + | Size A10 | 250 V/16 A Housings from page 162
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Description Part Number Drawing Figure
Contact insert 10 +
Male insert
for screw termination
C146 10A010 002 4
Male insert
with wire protection
for screw termination
C146 10A010 102 4
Female insert
for screw termination
C146 10B010 002 4
Female insert
with wire protection
for screw termination
C146 10B010 102 4
Curve
Wire gauge
a1.5 mm
2
b2.5 mm
2
20
heavy
|
mate® A Contact inserts 16 + |Size A16 | 250 V/16 A Housings from page 162
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Description Part Number Drawing Figure
Contact insert 16 +
Male insert
for screw termination
C146 10A016 002 4
Male insert
with wire protection
for screw termination
C146 10A016 102 4
Female insert
for screw termination
C146 10B016 002 4
Female insert
with wire protection
for screw termination
C146 10B016 102 4
Curve
Wire gauge
a1.5 mm
2
b2.5 mm
2
21
heavy
|
mate® A Contact inserts
2x16 + PE | Size A10 | 250 V/16 A
Housings from page 162
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Description Part Number Drawing Figure
Contact insert 32 +
Male insert
for screw termination
C146 10A016 002 4 (1 - 16)
+
C146 10A016 004 4 (17 - 32)
Male insert
with wire protection
for screw termination
C146 10A016 102 4 (1 - 16)
+
C146 10A016 104 4 (17 - 32)
Female insert
for screw termination
C146 10B016 002 4 (1 - 16)
+
C146 10B016 004 4 (17 - 32)
Female insert
with wire protection
for screw termination
C146 10B016 102 4 (1 - 16)
+
C146 10B016 104 4 (17 - 32)
Curve
Wire gauge
a1.5 mm
2
b2.5 mm
2
22
• Rated voltage 250 V
• Rated current 10 A ... 16 A
• Termination: crimp
• Number of contacts: 7, 15, 25, 40, 50,
64, 128
heavy
|
mate® D
23
Approvals, Testhouse Characteristics Approval-Number
SEV 250 V, 10 A
UL 600 V, 14 A
600 V, 15 A (high current)
E 63093
CSA 600 V, 10 A 48932
In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request.
heavy
|
mate® D Brief information
24
Range of housings
Size A3/4 Size A10 Size A16
Size E16 Size E24 Size E48
heavy
|
mate® D General information
General information
• Contact inserts without crimp contacts, crimping tools see
separate catalogue „Tools“.
• Contacts must be ordered separately, processing instructions
see catalogue „Tools“.
• We recommend using the high profile housings / hoods for the
heavy
|
mate
®
D inserts.
• Connectors series
heavy
|
mate
®
D may be engaged or disengaged
when live but without electrical load.
If these connectors are mated or unmated under load, the load
shall be reduced to 10 % of the rated current.
• For contact inserts for turned contacts, guide pins and guide
socket are recommended (see page 226).
• By using contact inserts with two PE-connections without hoods, it
is necessary to connect the facing of each PE-connection.
• If connectors are mounted in non conductive housings both
protective earthing terminals shall be mounted.
Standardised connectorsaccording to DIN EN 175 301 - 801 (DIN 43652)
Interchangeable with all other products which are according to the
standard.
a) Contact insert to contact insert 15, 25, 40, 64 way.
b) Contact insert to housing 15, 25, 40, 64 way.
High protection against mismating First-to-mate last-to-break protective ground contact
• Female inserts with funnel shaped contact entry avoids
mismating with stamped contacts.
Contact inserts for stamped contacts and for turned contacts
Restricted
entry
25
heavy
|
mate® D General information
Modified contact arrangement for rated voltages of 400 V
(15)
➛
7 + (25)
➛
11 +
(40)
➛
20 + (64)
➛
32 +
full load contact
unoccupied
Removal of contacts, front releas
stamped male contacts
all turned contacts
stamped female contacts
26
heavy
|
mate® D Characteristics contact inserts
1) Restriction for 8 contacts in metal housing see page 27 2) Modified contact arrangement, see
page 25 3) Label for CSA application see page 228 4) Polycarbonat-glas fibre filled
General Characteristics Standard Value
Number of contacts 7 15 25 40 50
2x25
64 128
2x64
Contact arrangement DIN EN 175 301-801 (DIN 43652) • • • •
Termination technique crimp, wire wrap
Max. wire diameter 4.1 mm
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage 1) IEC 60664-1 250 V~ (400 V~ 2)) (600 V UL / CSA 3))
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 III b
Rated impulse withstand voltage IEC 60664-1 4 kV
Rated current IEC 60512-5-2 see derating curves
Rated current Tamp = 40 °C
16 A 12 A 12 A 10 A 10 A 10 A
10 A
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40/125/21
Upper temperature IEC 60512-11-9 + 125°C
Lower temperature IEC 60512-11-10 - 40°C
Mechanical Characteristics
IP-degree of protection pin insert IEC 60529 unmated IP00 mated IP20
IP-degree of protection socket insert IEC 60529 unmated IP20 mated IP20
Weight pin insert 8 g 28 g 34 g 53 g 68 g 65 g
130 g
Weight socket insert 8 g 30 g 38 g 64 g 76 g 82 g
164 g
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Insert IEC 60664-1
PBTP
PC GV 4)
Colour insert IEC 60664-1 grey
27
heavy
|
mate® D Contact inserts
7 + , 8 pol | Size A3/4 | 250 V/10 A
Housings from page 162
Description Part Number Drawing Figure
Contact insert 7 + , 42 V~ in metal housings/250 V in thermoplastic housings (Please order contacts separately, see page 34)
Male insert
for stamped crimp contacts
C146 10A007 000 2
Male insert
for turned crimp contacts
C146 10A007 500 2
Female insert
for stamped crimp contacts
C146 10B007 000 2
Female insert
for turned crimp contacts
C146 10B007 500 2
Pin layout
Male insert 7+ Female insert
Protective earthing contact preleading
Description Part Number Drawing Figure
Contact insert 8, 42 V~ in metal housings/250 V in thermoplastic housings
(Please order contacts separately, see page 34)
Male insert
for stamped crimp contacts
C146 10A008 000 2
Male insert
for turned crimp contacts
C146 10A008 500 2
Female insert
for stamped crimp contacts
C146 10B008 000 2
Female insert
for turned crimp contacts
C146 10B008 500 2
Pin layout (Note: For use up to 42 V~, the PE contact can be used as regular contact.)
Male insert Female insert
8/PE
Derating curves
Stamped contacts Turned contacts
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
&
2.5 mm
2
c1.5 mm2 -
2.5 mm2
(High current)
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
28
heavy
|
mate® D Contact inserts 15 + | Size A10 | 250 V/10 A Housings from page 162
Description Part Number Drawing Figure
Contact insert
15 +
(Please order contacts separately, see page 34)
Male insert
for stamped crimp contacts
C146 10A015 000 2
Male insert
for turned crimp contacts
C146 10A015 500 2
Female insert
for stamped crimp contacts
C146 10B015 000 2
Female insert
for turned crimp contacts
C146 10B015 500 2
Contact insert
15 + , 2 x PE-termination
(Please order contacts separately, see page 34)
Male insert
for stamped crimp contacts
C146 10A015 060 2
Female insert
for stamped crimp contacts
C146 10B015 060 2
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Stamped contacts Turned contacts
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
d1.5 mm2 -
2.5 mm2
(High current)
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
29
heavy
|
mate® D Contact inserts 25 + | Size A16 | 250 V/10 A Housings from page 162
Description Part Number Drawing Figure
Contact insert
25 +
(Please order contacts separately, see page 34)
Male insert
for stamped crimp contacts
C146 10A025 000 2
Male insert
for turned crimp contacts
C146 10A025 500 2
Female insert
for stamped crimp contacts
C146 10B025 000 2
Female insert
for turned crimp contacts
C146 10B025 500 2
Contact insert
25 + , 2 x PE-termination
(Please order contacts separately, see page 34)
Male insert
for stamped crimp contacts
C146 10A025 060 2
Female insert
for stamped crimp contacts
C146 10B025 060 2
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Stamped contacts Turned contacts
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
d1.5 mm2 -
2.5 mm2
(High current)
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
30
heavy
|
mate® D Contact inserts 40 + | Size E16 | 250 V/10 A Housings from page 162
Description Part Number Drawing Figure
Contact insert
40 + (
Please order contacts separately, see page 34)
Male insert
for stamped crimp contacts
C146 10A040 000 2
Male insert
for turned crimp contacts
C146 10A040 500 2
Female insert
for stamped crimp contacts
C146 10B040 000 2
Female insert
for turned crimp contacts
C146 10B040 500 2
Contact insert
40 + , 2 x PE-termination
(Please order contacts separately, see page 34)
Male insert
for stamped crimp contacts
C146 10A040 060 2
Female insert
for stamped crimp contacts
C146 10B040 060 2
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Stamped contacts Turned contacts
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
d1.5 mm2
(High current)
e2.5 mm2
(High current)
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
31
heavy
|
mate® D Contact inserts 50 + | Size A32 | 250 V/10 A Housings from page 162
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Description Part Number Drawing Figure
Contact insert
50 + (
Please order contacts separately, see page 34)
Male insert
for stamped crimp contacts
C146 10A025 000 2
+
C146 10A025 005 2
Male insert
for turned crimp contacts
C146 10A025 500 2
+
C146 10A025 505 2
Female insert
for stamped crimp contacts
C146 10B025 000 2
+
C146 10B025 005 2
Female insert
for turned crimp contacts
C146 10B025 500 2
+
C146 10B025 505 2
Derating curves
Stamped contacts Turned contacts
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
d1.5 mm2
(High current)
e2.5 mm2
(High current)
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
32
heavy
|
mate® D Contact inserts 64 + | Size E24 | 250 V/10 A Housings from page 162
Description Part Number Drawing Figure
Contact insert
64 + (
Please order contacts separately, see page 34)
Male insert
for stamped crimp contacts
C146 10A064 000 2
Male insert
for turned crimp contacts
C146 10A064 500 2
Female insert
for stamped crimp contacts
C146 10B064 000 2
Female insert
for turned crimp contacts
C146 10B064 500 2
Contact insert
64 + , 2 x PE-termination (
Please order contacts separately, see page 34)
Male insert
for stamped crimp contacts
C146 10A064 060 2
Female insert
for stamped crimp contacts
C146 10B064 060 2
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Stamped contacts Turned contacts
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
d1.5 mm2
(High current)
e2.5 mm2
(High current)
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
33
heavy
|
mate® D Contact inserts 128 + | Size E48 | 250 V/10 A Housings from page 162
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Bezeichnung Bestellnummer Maßzeichnung Abbildung
Contact insert
128 + (
Please order contacts separately, see page 34)
Male insert
for stamped crimp contacts
C146 10A064 000 2
+
C146 10A064 005 2
Male insert
for turned crimp contacts
C146 10A064 500 2
+
C146 10A064 505 2
Female insert
for stamped crimp contacts
C146 10B064 000 2
+
C146 10B064 005 2
Female insert
for turned crimp contacts
C146 10B064 500 2
+
C146 10B064 505 2
Derating curves
Stamped contacts Turned contacts
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
d1.5 mm2
(High current)
e2.5 mm2
(High current)
Curve
Wire gauge
a0.5 mm
2
b1.5 mm
2
c2.5 mm
2
34
heavy
|
mate® D Crimp technology
Large range of wire gauges
.N01 016 0003 (1) .N01 016 0002 (1) .N01 016 0005 (1)
Gas-tight (coldwelding)
0.14 0.25 0.5 0.5 1.0 1.5 1.5 2.5
Stamped crimp contacts with insulation crimp, to absorbe mechanical stress from the crimped connection
Insulation grip
Mechanical retention spring stop on female and male contact
Female contact Male contact
High current carrying capacity
Example single contact
Curve a: 2.5 mm2 Standard contact. wire gauge Curve a: 2.5 mm2 High current contact, wire gauge
35
heavy
|
mate® D Characteristics crimp contacts
Stamped crimp contacts
Electrical Characteristics
Contact resistance IEC 60512-2-1 ≤ 5 m Ω
Climatical Characteristics
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Male contact Cu Zn (brass)
Female contact Cu Sn (tin bronce)
Contact plating Ag (silver) / Au (gold)
Turned crimp contacts
Electrical Characteristics
Contact resistance
IEC 60512-2-1 ≤ 5 m Ω
Climatical Characteristics
Upper temperature IEC 60512-11-9 + 100 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Male contact Cu Zn (brass)
Female contact Cu Zn (brass)
Contact plating Ag (silver) / Au (gold)
36
heavy
|
mate® D Stamped crimp contacts
Stripping length see page 249-251
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Stamped single contacts
silver plating
standard
0.14 - 0.5 mm226 - 20 100 VN01 016 0003 (1) VN02 016 0003 (1)
0.5 - 1.5 mm220 - 16 100 VN01 016 0002 (1) VN02 016 0002 (1)
1.5 - 2.5 mm216 - 14 100 VN01 016 0005 (1) VN02 016 0005 (1)
silver plating
high current
0.5 - 1.5 mm220 - 16 100 VN01 016 0015 (1) VN02 016 0015 (1)
1.5 - 2.5 mm216 - 14 100 VN01 016 0016 (1) VN02 016 0016 (1)
gold plating
standard
0.14 - 0.5 mm226 - 20 100 VN01 016 0003 (2) VN02 016 0003 (2)
0.5 - 1.5 mm220 - 16 100 VN01 016 0002 (2) VN02 016 0002 (2)
1.5 - 2.5 mm216 - 14 100 VN01 016 0005 (2) VN02 016 0005 (2)
Stamped Contacts on reel for hand crimp tools
silver plating
standard
0.14 - 0.5 mm226 - 20 200 ZN01 016 0003 (1) ZN02 016 0003 (1)
0.5 - 1.5 mm220 - 16 200 ZN01 016 0002 (1) ZN02 016 0002 (1)
1.5 - 2.5 mm216 - 14 200 ZN01 016 0005 (1) ZN02 016 0005 (1)
silver plating
high current
0.5 - 1.5 mm220 - 16 200 ZN01 016 0015 (1) ZN02 016 0015 (1)
1.5 - 2.5 mm216 - 14 100 ZN01 016 0016 (1) ZN02 016 0016 (1)
gold plating
standard
0.14 - 0.5 mm226 - 20 200 ZN01 016 0003 (2) ZN02 016 0003 (2)
0.5 - 1.5 mm220 - 16 200 ZN01 016 0002 (2) ZN02 016 0002 (2)
1.5 - 2.5 mm216 - 14 200 ZN01 016 0005 (2) ZN02 016 0005 (2)
Stamped contacts on reel for crimp machines contact feeding left hand side
silver plating
standard
0.14 - 0.5 mm226 - 20 2000 TN01 016 0003 (1) TN02 016 0003 (1)
0.5 - 1.5 mm220 - 16 2000 TN01 016 0002 (1) TN02 016 0002 (1)
1.5 - 2.5 mm216 - 14 2000 TN01 016 0005 (1) TN02 016 0005 (1)
silver plating
high current
0.5 - 1.5 mm220 - 16 2000 TN01 016 0015 (1) TN02 016 0015 (1)
1.5 - 2.5 mm218 - 14 2000 TN01 016 0016 (1) TN02 016 0016 (1)
gold plating
standard
0.14 - 0.5 mm226 - 20 2000 TN01 016 0003 (2) TN02 016 0003 (2)
0.5 - 1.5 mm220 - 16 2000 TN01 016 0002 (2) TN02 016 0002 (2)
1.5 - 2.5 mm216 - 14 2000 TN01 016 0005 (2) TN02 016 0005 (2)
Tools for stamped crimp contacts
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts - - - FG 0300 146 1
Service crimping tool 0.14 - 0.5 mm2
0.5 - 1.5 mm2
--TA 0100 146
Crimping tool
for single contacts
0.14 - 0.5 mm2
0.5 - 1.5 mm2
1.5 - 2.5 mm2
TA 0001 146 000 1
TA 0002 146 000 1
TA 0007 146 000 3
TA 0000 202
TA 0000 163
TA 0000 141
TA 0000
TA 0500
Further tools see catalogue "Tools"
37
heavy
|
mate® D Turned crimp contacts
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned crimp contacts single contact
silver plating 0.14 - 0.37 mm226 - 22 100 VN01 016 0024 (1)C VN02 016 0024 (1)C
0.5 mm220 100 VN01 016 0025 (1)C VN02 016 0025 (1)C
0.75 - 1.0 mm220 - 16 100 VN01 016 0026 (1)C VN02 016 0026 (1)C
1.5 mm216 - 15 100 VN01 016 0027 (1)C VN02 016 0027 (1)C
2.5 mm214 100 VN01 016 0028 (1)C VN02 016 0028 (1)C
gold plating 0.14 - 0.37 mm226 - 22 100 VN01 016 0024 (2)C VN02 016 0024 (2)C
0.5 mm220 100 VN01 016 0025 (2)C VN02 016 0025 (2)C
0.75 - 1.0 mm220 - 16 100 VN01 016 0026 (2)C VN02 016 0026 (2)C
1.5 mm216 - 15 100 VN01 016 0027 (2)C VN02 016 0027 (2)C
2.5 mm214 100 VN01 016 0028 (2)C VN02 016 0028 (2)C
Tools for turned crimp contacts
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts - - - FG 0300 146 1
Service crimping tool 0.14 - 0.5 mm2
0.5 - 1.5 mm2
--TA 0100 146
Further tools see catalogue "Tools"
38
• Rated voltage 250 V
• Rated current 8 A ... 9 A
• Termination: crimp
• Number of contacts: 24, 42, 72, 108
heavy
|
mate® DD
39
heavy
|
mate® DD Brief information
Approvals, Testhouse Characteristics Approval-Number
SEV 250 V, 10 A
UL 600 V, 8,5 A E 63093
CSA 600 V, 10 A LR 700721
In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request.
40
heavy
|
mate® DD
General Characteristics Standard Value
Number of contacts 24 + 42 + 72 + 108 +
Termination technique crimp
Wire gauge 0.14 mm2 - 2.5 mm2
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 250 V (600 V UL / CSA)
Pollution degree IEC 60664-1 2 (3 mated and locked)
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 III b
Rated impulse withstand voltage IEC 60664-1 4 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 m Ω
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 100 / 21
Upper temperature IEC 60512-11-9 + 100 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Weight pin insert 44 g 50 g 63 g 86 g
IP-degree of protection pin insert IEC 60529 unmated IP00 mated IP20
IP-degree of protection socket insert IEC 60529 unmated IP20 mated IP20
Weight socket insert 41 g 50 g 67 g 88 g
Mechanical operation IEC 60512-9-1 > 500 mating cycles
Materials
Insert PBTP
Colour insert grey
Contacts CuZn (brass)
Contact plating Ag (silver)
Derating curves
24 + 42 +
72 + 108 +
heavy
|
mate® DD Characteristics contact inserts
Curve
Wire gauge
a0.75 mm
2
b1.5 mm
2
Curve
Wire gauge
a0.75 mm
2
b1.5 mm
2
Curve
Wire gauge
a0.75 mm
2
b1.5 mm
2
Curve
Wire gauge
a0.75 mm
2
b1.5 mm
2
41
Description Part Number Drawing Figure
Contact insert 24 + for turned contacts Size E 6 (Please order contacts separately, see page
43)
Male insert
for turned crimp contacts
C146 10A024 000 9
Female insert
for turned crimp contacts
C146 10B024 000 9
Contact insert 42 + for turned contacts Size E 10
(Please order contacts separately,
see page
43)
Male insert
for turned crimp contacts
C146 10A042 000 9
Female insert
for turned crimp contacts
C146 10B042 000 9
Contact insert 72 + for turned contacts Size E 16
(Please order contacts separately,
see page
43)
Male insert
for turned crimp contacts
C146 10A072 000 9
Female insert
for turned crimp contacts
C146 10B072 000 9
heavy
|
mate® DD Contact inserts 24 - 72 + | 250 V/10 A Housings from page 162
42
heavy
|
mate® DD Contact inserts 108 - 216 + | 250 V/10 A Housings from page 162
Description Part Number Drawing Figure
Contact insert 108 + for turned contacts Size
E 24
(Please order contacts separately, see page
43)
Male insert
for turned crimp contacts
C146 10A108 000 9
Female insert
for turned crimp contacts
C146 10B108 000 9
Contact insert 216 + for turned contacts Size
E 48
(Please order contacts separately, see page
43)
Male insert
for turned crimp contacts
C146 10A108 000 9
+
C146 10A108 005 9
Female insert
for turned crimp contacts
C146 10B108 000 9
+
C146 10B108 005 9
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
43
heavy
|
mate® DD Crimp contacts
Stripping length see page 249-251
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned crimp contacts single contact 1.6mm
silver plating 0.14 - 0,37 mm226 - 22 100 VN01 016 0024 (1)C VN02 016 0024 (1)C
0.5 mm220 100 VN01 016 0025 (1)C VN02 016 0025 (1)C
0.75 - 1,0 mm220 - 16 100 VN01 016 0026 (1)C VN02 016 0026 (1)C
1.5 mm216 - 15 100 VN01 016 0027 (1)C VN02 016 0027 (1)C
2.5 mm214 100 VN01 016 0028 (1)C VN02 016 0028 (1)C
gold plating 0.14 - 0.37 mm226 - 22 100 VN01 016 0024 (2)C VN02 016 0024 (2)C
0.5 mm220 100 VN01 016 0025 (2)C VN02 016 0025 (2)C
0.75 - 1.0 mm220 - 16 100 VN01 016 0026 (2)C VN02 016 0026 (2)C
1.5 mm216 - 15 100 VN01 016 0027 (2)C VN02 016 0027 (2)C
2.5 mm214 100 VN01 016 0028 (2)C VN02 016 0028 (2)C
Tools for turned crimp contacts
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts - - - FG 0300 146 1
Service crimping tool 0.14 - 0.5 mm2
0.5 - 1.5 mm2
--TA 0100 146
Further tools see catalogue “Tools”
44
heavy
|
mate® E
• Rated voltage 500 V
• Rated current 16 A ... 22 A
• Termination: screw, crimp,
tension spring
• Numbers of contacts: 6, 10, 16, 24, 48
45
heavy
|
mate® E Brief information
Approvals, Testhouse Characteristics Approval-Number
SEV 400 V, 16 A
UL 600 V, 16 A E 63093
CSA 600 V, 16 A 48932
In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request.
46
heavy
|
mate® E General information
General information
• Contact inserts without crimp contacts.
• Connectors series heavy
|
mate® E may be engaged or disengaged
when live but without electrical load. If these connectors are mated
or unmated under load, the load shall be reduced to 10 % of the
rated current.
• Crimping tools and processing instructions see separate catalogue
„Tools“.
• Low and high profile housings are usable.
• If wire ferrule are used, screw terminals without
wire protection are preferred.
No standard for this series, but:
Interchangeable with other products
a) contact insert to contact insert 6, 10, 16, 24 contacts
b) contact insert to housing 6, 10 ,16, 24 contacts
Housings are designed according to DIN EN 175 301 - 801
First-to-mate last-to-break protective ground contact
Contact inserts for screw termination, screw termination with wire protection and for crimp termination
Screw termination Screw termination with wire protection Crimp termination
Range of housings
Size E6 Size E10 Size E16
Size E24 Size E48
47
heavy
|
mate® E Characteristics contact inserts
1) Label for CSA application see page 228
2) IP-degree of protection on ter mination side of screw version IP 10
General Characteristics Standard Value
Number of contacts 6 + 10 + 16 + 24 + 48 +
Termination technique crimp / screw / tension spring
Wire gauge 0.5 - 4 mm2
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 max. 500 V (600 V UL / CSA 1))
Pollution degree IEC 60664-1 3
Material group IEC 60664-1 III b
Installation (overvoltage) category IEC 60664-1 III
Rated impulse withstand voltage IEC 60664-1 6,0 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Rated current Tamp = 40 °C 22 A 19 A 19 A 18 A 18 A
Contact resistance IEC 60512-2-1 < 5 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40°C
Mechanical Characteristics
IP-degree of protection pin insert 2) IEC 60529 unmated IP00 mated IP20
IP-degree of protection socket insert 2) IEC 60529 unmated IP20 mated IP20
Weight:
male insert crimp (for stamped contacts)
female insert crimp (for stamped contacts)
male insert screw
female insert screw
33 g
33 g
43 g
43 g
39 g
39 g
57 g
57 g
45 g
49 g
78 g
78 g
55 g
62 g
105 g
106 g
110 g
124 g
210 g
212 g
Mechanical operation IEC 60512-9-1 > 500 mating cycles
Materials
Insert PC GV (Polycarbonat)
Colour insert grey
Screw contacts CuZn (brass)
Contact plating Ag (silver) / Au (gold)
48
heavy
|
mate® E Contact inserts 6 + | Size E6 | 500 V/16 A Housings from page 162
Description Part Number Drawing Figure
Screw termination
Male insert
for screw termination
C146 10A006 002 1
Male insert
with wire protection
for screw termination
C146 10A006 102 1
Female insert
for screw termination
C146 10B006 002 1
Female insert
with wire protection
for screw termination
C146 10B006 102 1
Tension spring
Male insert
with Tension spring
C146 10A006 400 1
Female insert
with Tension spring
C146 10B006 400 1
Stamped crimp contacts (Please order contacts separately, see page 58)
Male insert
for stamped crimp contacts
C146 10A006 000 1
Female insert
for stamped crimp contacts
C146 10B006 000 1
49
heavy
|
mate® E Contact inserts 6 + | Size E6 | 500 V/16 A Housings from page 162
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Stamped contacts
Turned contacts
Screw termination
Curve a: 1.5 mm2 wire gauge Curve b: 2.5 mm2 wire gauge
Description Part Number Drawing Figure
Turned crimp contacts (Please order contacts separately, see page 58)
Male insert
for turned crimp contacts
C146 10A006 500 1
Female insert
for turned crimp contacts
C146 10B006 500 1
50
heavy
|
mate® E Contact inserts 10 + | Size E10 | 500 V/16 A Housings from page 162
Description Part Number Drawing Figure
Screw termination
Male insert
for screw termination
C146 10A010 002 1
Male insert
with wire protection
for screw termination
C146 10A010 102 1
Female insert
for screw termination
C146 10B010 002 1
Female insert
with wire protection
for screw termination
C146 10B010 102 1
Tension spring
Male insert
with Tension spring
C146 10A010 400 1
Female insert
with Tension spring
C146 10B010 400 1
Stamped crimp contacts (Please order contacts separately, see page 58)
Male insert
for stamped crimp contacts
C146 10A010 000 1
Female insert
for stamped crimp contacts
C146 10B010 000 1
51
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Stamped contacts
Turned contacts
Screw termination
Curve a: 1.5 mm2 wire gauge Curve b: 2.5 mm2 wire gauge
heavy
|
mate® E Contact inserts 10 + | Size E10 | 500 V/16 A Housings from page 162
Description Part Number Drawing Figure
Turned crimp contacts (Please order contacts separately, see page 58)
Male insert
for turned crimp contacts
C146 10A010 500 1
Female insert
for turned crimp contacts
C146 10B010 500 1
52
heavy
|
mate® E Contact inserts 16 + | Size E16 | 500 V/16 A Housings from page 162
Description Part Number Drawing Figure
Screw termination
Male insert
for screw termination
C146 10A016 002 1
Male insert
with wire protection
for screw termination
C146 10A016 102 1
Female insert
for screw termination
C146 10B016 002 1
Female insert
with wire protection
for screw termination
C146 10B016 102 1
Tension spring
Male insert
with Tension spring
C146 10A016 400 1
Female insert
with Tension spring
C146 10B016 400 1
Stamped crimp contacts (Please order contacts separately, see page 58)
Male insert
for stamped crimp contacts
C146 10A016 000 1
Female insert
for stamped crimp contacts
C146 10B016 000 1
53
heavy
|
mate® E Contact inserts 16 + | Size E16 | 500 V/16 A Housings from page 162
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Stamped contacts
Turned contacts
Screw termination
Curve a: 1.5 mm2 wire gauge Curve b: 2.5 mm2 wire gauge
Description Part Number Drawing Figure
Turned crimp contacts (Please order contacts separately, see page 58)
Male insert
for turned crimp contacts
C146 10A016 500 1
Female insert
for turned crimp contacts
C146 10B016 500 1
54
heavy
|
mate® E Contact inserts 24 + | Size E24 | 500 V/16 A Housings from page 162
Description Part Number Drawing Figure
Screw termination
Male insert
for screw termination
C146 10A024 002 1
Male insert
with wire protection
for screw termination
C146 10A024 102 1
Female insert
for screw termination
C146 10B024 002 1
Female insert
with wire protection
for screw termination
C146 10B024 102 1
Tension spring
Male insert
with Tension spring
C146 10A024 400 1
Female insert
with Tension spring
C146 10B024 400 1
Stamped crimp contacts (Please order contacts separately, see page 58)
Male insert
for stamped crimp contacts
C146 10A024 000 1
Female insert
for stamped crimp contacts
C146 10B024 000 1
55
heavy
|
mate® E Contact inserts 24 + | Size E24 | 500 V/16 A Housings from page 162
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Stamped contacts
Turned contacts
Screw termination
Curve a: 1.5 mm2 wire gauge Curve b: 2.5 mm2 wire gauge
Description Part Number Drawing Figure
Turned crimp contacts (Please order contacts separately, see page 58)
Male insert
for turned crimp contacts
C146 10A024 500 1
Female insert
for turned crimp contacts
C146 10B024 500 1
56
heavy
|
mate® E Contact inserts 48 + | Size E48 | 500 V/16 A Housings from page 162
Description Part Number Drawing Figure
Screw termination
Male insert
for screw termination
C146 10A024 002 1
+
C146 10A024 002 1
Male insert
with wire protection
for screw termination
C146 10A024 102 1
+
C146 10A024 102 1
Female insert
for screw termination
C146 10B024 002 1
+
C146 10B024 002 1
Female insert
with wire protection
for screw termination
C146 10B024 102 1
+
C146 10B024 102 1
Stamped crimp contacts (Please order contacts separately, see page 58)
Male insert
for stamped crimp contacts
C146 10A024 000 1
+
C146 10A024 005 1
Female insert
for stamped crimp contacts
C146 10B024 000 1
+
C146 10B024 005 1
Turned crimp contacts (Please order contacts separately, see page 58)
Male insert
for turned crimp contacts
C146 10A024 500 1
+
C146 10A024 505 1
Female insert
for turned crimp contacts
C146 10B024 500 1
+
C146 10B024 505 1
57
heavy
|
mate® E Kontakteinsätze 48 + | Baugröße E48 | 500 V/16 A Housings from page 162
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Stamped contacts
Turned contacts
Screw termination
Curve a: 1.5 mm2 wire gauge Curve b: 2.5 mm2 wire gauge
58
heavy
|
mate® E Crimp technology
Large range of wire gauges
N01 025 0001 (1) N01 025 0010 (1)
Gas-tight (coldwelding)
0,5 1,0 1,5 1,5 2,5
Stamped crimp contacts with insulation crimp, to absorbe mechanical stress from the crimped connection
Insulation grip
Mechanical retention spring stop on female and male contact
Female contact Male contact
High current carrying capacity
Example single contact
Curve a: 2.5 mm2 wire gauge
59
heavy
|
mate® E Characteristics crimp contacts
Stamped crimp contacts
Electrical Characteristics
Contact resistance IEC 60512-2-1 < 5 m Ω
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Male contact Cu Zn (brass)
Female contact Cu Sn (tin bronce)
Contact plating Ag (silver) / Au (gold)
Turned crimp contacts
Electrical Characteristics
Contact resistance IEC 60512-2-1 ≤ 5 m Ω
Climatical Characteristics
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Male contact Cu Zn (brass)
Female contact Cu Zn (brass)
Contact plating Ag (silver) / Au (gold)
60
heavy
|
mate® E Stamped crimp contacts
Stripping length see page 249-251
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Stamped single contacts
silver plating 0.5 - 1.5 mm220 - 16 100 VN01 025 0001 (101) VN02 025 0001 (101)
1.5 - 2.5 mm216- 14 100 VN01 025 0010 (101) VN02 025 0010 (101)
gold plating 0.5 - 1.5 mm220 - 16 100 VN01 025 0001 (102) VN02 025 0001 (102)
1.5 - 2.5 mm216- 14 100 VN01 025 0010 (102) VN02 025 0010 (102)
Stamped Contacts on reel for hand crimp tools
silver plating 0.5 - 1.5 mm220 - 16 200 ZN01 025 0001 (1) ZN02 025 0001 (1)
1.5 - 2.5 mm216 - 14 100 ZN01 025 0010 (1) ZN02 025 0010 (1)
gold plating 0.5 - 1.5 mm220 - 16 200 ZN01 025 0001 (2) ZN02 025 0001 (2)
1.5 - 2.5 mm216 - 14 100 ZN01 025 0010 (2) ZN02 025 0010 (2)
Stamped contacts on reel for crimp machines contact feeding left hand side
silver plating 0.5 - 1.5 mm220 - 16 2000 TN01 025 0001 (1) TN02 025 0001 (1)
1.5 - 2.5 mm216 - 14 2000 TN01 025 0010 (1) TN02 025 0010 (1)
Tools for turned crimp contacts
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts - - - FG 0200 146 1
Crimping tool for stamped
single contacts
0.5 - 1.5 mm2
1.5 - 2.5 mm2
TA 0004 146 000 1
TA 0005 146 000 3
TA 0000 163
TA 0000 141
TA 0000
4-indent crimping tool
for turned contacts
0.5 - 4.0 mm2-- TB 0600 146
Further tools see catalogue “Tools”
61
heavy
|
mate® E Turned crimp contacts
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned crimp contacts single contact
silver plating 0.5 mm220 100 VN01 025 0035 (1)C VN02 025 0035 (1)C
0.75 - 1.0 mm218 100 VN01 025 0036 (1)C VN02 025 0036 (1)C
1.5 mm216 100 VN01 025 0037 (1)C VN02 025 0037 (1)C
2.5 mm214 100 VN01 025 0038 (1)C VN02 025 0038 (1)C
4.0 mm212 100 VN01 025 0039 (1)C VN02 025 0039 (1)C
gold plating 0.5 mm220 100 VN01 025 0035 (2)C VN02 025 0035 (2)C
0.75 - 1.0 mm218 100 VN01 025 0036 (2)C VN02 025 0036 (2)C
1.5 mm216 100 VN01 025 0037 (2)C VN02 025 0037 (2)C
2.5 mm214 100 VN01 025 0038 (2)C VN02 025 0038 (2)C
4.0 mm212 100 VN01 025 0039 (2)C VN02 025 0039 (2)C
Tools for turned crimp contacts
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts FG 0300 146 7
Crimping tool for stamped
single contacts
0.5 - 2.5 mm2
4 mm2
TA 0010 146 000 6
TA 0010 146 000 7
TA 0000 144
TA 0000 124
TA 0000
TA 0500
4-indent crimping tool
for turned contacts
TB 0600 146
Further tools see catalogue “Tools”
62
heavy
|
mate® EE
• Rated voltage
500 V (600 V UL / CSA)
• Rated current 16 A
• Termination: crimp
• Numbers of contacts: 10, 18, 32, 46
63
heavy
|
mate® EE Brief information
Approvals, Testhouse Characteristics Approval-Number
UL 600 V, 15 A E 63093
CSA 600 V, 16 A 172062-1027396 (LR 48323-2)
In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request.
64
heavy
|
mate® EE heavy
|
mate® EE Characteristics contact inserts
General Characteristics Standard Value
Number of contacts 10 + 18 + 32 + 46 +
Termination technique crimp
Wire gauge 0.5 mm2 - 4.0 mm2
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 500 V (600 V UL / CSA)
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 III b
Rated impulse withstand voltage IEC 60664-1 6 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 m Ω
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 100 / 21
Upper temperature IEC 60512-11-9 + 100 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 > 500 mating cycles
IP-degree of protection pin insert IEC 60529 unmated IP00 mated IP20
IP-degree of protection socket insert IEC 60529 unmated IP20 mated IP20
Materials
Insert PC
Colour insert grey
Contacts CuZn (brass)
Contact plating Ag (silver) / Au (gold)
Derating curves
10 + 18 +
32 + 46 +
Curve
Wire gauge
a0.5 mm
2
b2.5 mm
2
c4.0 mm
2
Curve
Wire gauge
a0.5 mm
2
b2.5 mm
2
c4.0 mm
2
Curve
Wire gauge
a0.5 mm
2
b2.5 mm
2
c4.0 mm
2
Curve
Wire gauge
a0.5 mm
2
b2.5 mm
2
c4.0 mm
2
65
heavy
|
mate® EE Contact inserts 10 - 18 + | 500 V/15 A Housings from page 162
Description Part Number Drawing Figure
Contact insert10 + Size E 6 (Please order contacts separately, see page
67)
Male insert
for turned crimp contacts
C146 10A010 500 10
Female insert
for turned crimp contacts
C146 10B010 500 10
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Description Part Number Drawing Figure
Contact insert 18 + Size E 10 (Please order contacts separately, see page 67)
Male insert
for turned crimp contacts
C146 10A018 500 10
Female insert
for turned crimp contacts
C146 10B018 500 10
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
10
8
9
75 5
64
2
3
146
2
3
1
9
10
8
7
9
13 9
10 6
15
16
17
18
14
2
3
4
5
1
610
2
3
4
5
1
15
16
17
18
14
13
66
heavy
|
mate® EE Contact inserts 32 - 46 + | 500 V/16 A Housings from page 162
Description Part Number Drawing Figure
Contact insert 32 + Size E 16 (Please order contacts separately, see page 67)
Male insert
for turned crimp contacts
C146 10A032 500 10
Female insert
for turned crimp contacts
C146 10B032 500 10
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Description Part Number Drawing Figure
Contact insert 46 + Size E 24 (Please order contacts separately, see page 67)
Male insert
for turned crimp contacts
C146 10A046 500 10
Female insert
for turned crimp contacts
C146 10B046 500 10
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
23 16
17 10
25
26
27
28
29
30
31
32
24
2
3
4
5
6
9
8
7
1
23
10 17
2
3
4
5
6
9
8
7
1
25
26
27
28
29
30
31
32
24
16
14 24
23 33
2
3
4
5
6
13
12
11
10
9
8
7
1
33 23
24 14
35
36
37
38
39
40
41
42
43
44
45
46
34
2
3
4
5
6
13
12
11
10
9
8
7
1
35
36
37
38
39
40
41
42
43
44
45
46
34
67
heavy
|
mate® EE Crimp contacts
Stripping length see page 249-251
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned crimp contacts single contact 2.5mm
silver plating 0.5 mm220 100 VN01 025 0035 (1)C VN02 025 0035 (1)C
0.75 - 1.0 mm218 100 VN01 025 0036 (1)C VN02 025 0036 (1)C
1.5 mm216 100 VN01 025 0037 (1)C VN02 025 0037 (1)C
2.5 mm214 100 VN01 025 0038 (1)C VN02 025 0038 (1)C
4.0 mm212 100 VN01 025 0039 (1)C VN02 025 0039 (1)C
gold plating 0.5 mm220 100 VN01 025 0035 (2)C VN02 025 0035 (2)C
0.75 - 1.0 mm218 100 VN01 025 0036 (2)C VN02 025 0036 (2)C
1.5 mm216 100 VN01 025 0037 (2)C VN02 025 0037 (2)C
2.5 mm214 100 VN01 025 0038 (2)C VN02 025 0038 (2)C
4.0 mm212 100 VN01 025 0039 (2)C VN02 025 0039 (2)C
Tools for turned crimp contacts
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts FG 0300 146 7
Crimping tool for stamped
single contacts
0.5 - 2.5 mm2
4 mm2
TA 0010 146 000 6
TA 0010 146 000 7
TA 0000 144
TA 0000 124
TA 0000
TA 0500
4-indent crimping tool
for turned contacts
TB 0600 146
Further tools see catalogue “Tools”
68
• Rated voltage 400 V
• Material contacts: iron-constantan
• Rated current 10 A
• Number of contacts: 6, 10, 16, 24
heavy
|
mate® E / FE / KO
69
heavy
|
mate® E / FE / KO Brief information
70
heavy
|
mate® E / FE / KO General information
Connectors with iron (FE) and constantan (CO) contacts
are basically used in measuring and control circuits to serve as
interface between FE/CO thermocouples and control unit, i. e.
temperature control of moulds in injection moulding machines.
Through the use of FE/CO connectors in the thermocouple circuit
the measuring results are more accurate, thus the tolerance of the
temperature control is much narrower.
Amphenol’s Industial Connectors with iron (FE) an Contantan
(CO) contacts are used to connect FE/CO thermocouples with
electronic signal amplifiers in measuring and control circuits, i. e. for
temperature control of moulding machines.
Errors with various combinations
The connection of unlike metals (FE/Brass and CO/Brass) generate
thermoelectric voltage errors in the mesuring circuit caused by the
flow from iron wire to the brass contact or by temperature changes at
the contact elements.
Contact
Material
Nominal Temp.
without Thermo Contacts with Thermo Contacts
MS/FE MS/KO FE/FE KO/KO
100 °C + 4 % - 16 % - 4 % - 2 %
200 °C + 2.5 % - 8 % - 3 % - 1.5 %
300 °C + 1.3 % - 12.7 % - 1.3 % 0 %
400 °C + 1.5 % - 4.5 % - 1.0 % 0 %
By using FE/CO contacts respectively these deviations will be minimized.
Material / Temperature Range
Temperatur range Material/measurement procedure
< 150 °C any/Resistance measurement
150 °C - 450 °C FE-CO (iron/Constantan)
450 °C - approx. 1000 °C Ni/Cr-Ni (Nickel/Chrome/Nickel)
Temperature changes cause errors
Nominale Ambient temperature mV/°C
Temp.°C
71
heavy
|
mate® E / FE / KO Characteristics contact inserts
1) IP-degree of protection on ter mination side of screw version IP 10
General Characteristics Standard Value
Number of contacts 6 + 10 + 16 + 24 +
Termination technique screw
Wire gauge 0.25 mm2 - 2.5 mm2
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 500 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 III b
Current carrying capacity IEC 60664-1 6 kV
Rated current Tamp = 40 °C 10 A
Contact resistance IEC 60512-2-1 ≤ 10 m Ω
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 100 / 21
Upper temperature IEC 60512-11-9 + 100 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
IP-degree of protection pin insert 1) IEC 60529 unmated IP00 mated IP20
IP-degree of protection socket insert 1) IEC 60529 unmated IP20 mated IP20
Weight pin insert 45 g 60 g 78 g 105 g
Weight socket insert 45 g 60 g 78 g 105 g
Mechanical operation IEC 60512-9-1 ≥ 100 mating cycles
Materials
Insert PA, GV (Polyamid)
Colour insert grey
Contacts iron; gal cd 4
constantan = without plating
72
heavy
|
mate® E / FE / KO Contact inserts 6 - 10 + Housings from page 162
Description Part Number Drawing Figure
Contact insert 6 + with iron-constantan contacts
Male insert
with wire protection
C146 10A006 810 1
Female insert
with wire protection
C146 10B006 810 1
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Description Part Number Drawing Figure
Contact insert 10 + with iron-constantan contacts
Male insert
with wire protection
C146 10A010 810 1
Female insert
with wire protection
C146 10B010 810 1
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
73
heavy
|
mate® E / FE / KO Contact inserts 16 - 24 + Housings from page 162
Description Part Number Drawing Figure
Contact insert 16 + with iron-constantan contacts
Male insert
with wire protection
C146 10A016 810 1
Female insert
with wire protection
C146 10B016 810 1
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Description Part Number Drawing Figure
Contact insert 24 + with iron-constantan contacts
Male insert
with wire protection
C146 10A024 810 1
Female insert
with wire protection
C146 10B024 810 1
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
74
• Modular connector
• Compatible with market standard
• Rated voltage up to 830 V
•
Rated current
up to 40 A
• Termination: crimp
• Numbers of contacts: 2 - 102
heavy
|
mate® F
75
heavy
|
mate® F Brief information
Approvals, Testhouse Characteristics Approval-Number
UL in preparation in preparation
CSA in preparation in preparation
76
heavy
|
mate® F General information
General information
• Modules inserts without crimp contacts, crimping tools see
separate catalogue “Tools”.
• Contacts must be ordered separatly, processing instructions see
catalogue “Tools”.
• Connectors series heavy
|
mate® F may be engaged or disengaged
when live but without electrical load.
If these connectors are mated or unmated under load, the load
shall be reduced to 10 % of rated current.
• We recommend using the high profile housings / hoods for the
heavy
|
mate® F inserts.
• Empty modul spaces have to be filled with blind modules.
• Torque for PE connection 1.2 Nm
Advantages of the system
• No standard but interchangeable with competitive products.
• Housings are designed according to DIN EN 175 301 801
• Simply connecting of the modules and frames.
First-to-mate last-to-break protective ground contact
Range of housings
Size E6 Size E10 Size E16
Size E24 Size E48
77
heavy
|
mate® F How to select a solution with series heavy
|
mate® F?
Requirements
• 3 x 400V; 50A; 6mm² wire gauge
• 8 x 250V; 8A; 1.5mm² wire gauge
• 5 x 400V; 15A; 4mm² wire gauge
Solution
1. Check how 16 contacts can be realized; see modules overview on page 78
Possible selection:
a) 1 x 17 contacts
b) 2 x 12 contacts
c) 1 x 6 contacts + 1 x 12 contacts
d) 1 x 3 contacts + 1 x 6 contacts + 1 x 12 contacts
2. Check technical parameters / solution, see detail pages of the modules from page 82
Possible selection:
a) not possible due to voltage
b) not possible due to voltage
c) not possible due to current
d) POSSIBLE
3. Choose matching contact, see detail page of the modules on page 82
Possible selection:
a) 3 contacts = C146 10A003 500 15 → contacts = VN01 040 0013 1C
b) 6 contacts = C146 10A006 500 15 → contacts = VN01 025 0039 1C
c) 12 contacts = C146 10A012 500 15 → contacts = VN01 016 0027 1C
4. Choose matching frame, see frames on page 80
Solution: C146 10P10 000 15
5. Choose matching housing, see housings on page 162
Solution: C146 21R010 600 8
Schematic construction
78
heavy
|
mate® F
1) If connectors are mounted in non conductive housings both protective earthing terminals shall be mounted.
heavy
|
mate® F Modules Overview
Description Part Number Drawing Figure
3 contacts module for turned contacts, details see page 82
Pin modules C146 10A003 500 15
Socket modules C146 10B003 500 15
6 contacts module for turned contacts, 500V, details see page 84
Pin modules C146 10A006 500 15
Socket modules C146 10B006 500 15
8 contacts module for turned contacts, 400V, details see page 86
Pin modules C146 10A008 500 15
Socket modules C146 10B008 500 15
79
heavy
|
mate® F
1) If connectors are mounted in non conductive housings both protective earthing terminals shall be mounted.
heavy
|
mate® F Modules Overview
Description Part Number Drawing Figure
12 contacts module for turned contacts. 250V, details see page 88
Pin modules C146 10A012 500 15
Socket modules C146 10B012 500 15
17 contacts module for turned contacts, 160V, details see page 90
Pin modules C146 10A017 500 15
Socket modules C146 10B017 500 15
20 contacts module for turned contacts 500V, details see page 92
Pin modules C146 10A020 500 15
Socket modules C146 10B020 500 15
80 It is possible to mount socket modules in frames for pin modules (possibility of inverse configuration).
1) If connectors are mounted in non conductive housings both protective earthing terminals shall be mounted.
heavy
|
mate® F Frames Housings from page 162
Description Part Number Drawing Figure
Frames for 2 modules
Frame for pin modules C146 10P006 000 15
Frame for socket modules C146 10S006 000 15
Frames for 3 modules
Frame for pin modules C146 10P010 000 15
Frame for socket modules C146 10S010 000 15
Frames for 4 modules
Frame for pin modules C146 10P016 000 15
Frame for socket modules C146 10S016 000 15
81
1) If connectors are mounted in non conductive housings both protective earthing terminals shall be mounted.
Description Part Number Drawing Figure
Frames for 6 modules
Frame for pin modules C146 10P024 000 15
Frame for socket modules C146 10S024 000 15
heavy
|
mate® F Frames Housings from page 162
82
heavy
|
mate® F Characteristics 3 contacts module
General Characteristics Standard Value
Number of contacts 3
Termination technique crimp
Wire Gauge 1.5 –6.0 mm² (AWG 16-10)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 400 V (conductor – earth)
690 V (conductor – conductor)
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II (PA)
Rated impulse withstand voltage IEC 60664-1 6 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40/125/21
Upper temperature IEC 60512-11-9 +125°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥500 mating cycles
IP-degree of protection IEC 60529 IP00 (pin insert) / IP20 (socket insert)
Materials
Module PA6.6 GF
Colour module black
Contact CuZn (brass)
Contact plating Ag (silver) / Au (gold)
Derating Curves
In preparation
83
heavy
|
mate® F 3 contacts module + crimp contacts
Description Part Number Drawing Figure
3 contacts module (Please order contacts separately)
Pin module C146 10A003 500 15
Socket module C146 10B003 500 15
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 4 mm crimp contacts single contact
silver plating 1.5 mm216 100 VN01 040 0010 1C VN02 040 0010 1C
2.5 mm214 100 VN01 040 0011 1C VN02 040 0011 1C
4 mm212 100 VN01 040 0012 1C VN02 040 0012 1C
6 mm210 100 VN01 040 0013 1C VN02 040 0013 1C
84
heavy
|
mate® F Characteristics 6 contacts module
General Characteristics Standard Value
Number of contacts 6
Termination technique crimp
Wire Gauge 0.5 –4.0 mm² (AWG 20-12)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 500 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II (PA)
Rated impulse withstand voltage IEC 60664-1 6 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40/125/21
Upper temperature IEC 60512-11-9 +125°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥500 mating cycles
IP-degree of protection IEC 60529 IP00 (pin insert) / IP20 (socket insert)
Materials
Module PA6.6 GF
Colour module black
Contact CuZn (brass)
Contact plating Ag (silver) / Au (gold)
Derating Curves
In preparation
85
heavy
|
mate® F 6 contacts module + crimp contacts
Description Part Number Drawing Figure
6 contacts module (Please order contacts separately)
Pin module C146 10A006 500 15
Socket module C146 10B006 500 15
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 2.5 mm crimp contacts single contact
silver plating 0.5 mm220 100 VN01 025 0035 (1)C VN02 025 0035 (1)C
0.75 - 1.0 mm218 100 VN01 025 0036 (1)C VN02 025 0036 (1)C
1.5 mm216 100 VN01 025 0037 (1)C VN02 025 0037 (1)C
2.5 mm214 100 VN01 025 0038 (1)C VN02 025 0038 (1)C
4.0 mm212 100 VN01 025 0039 (1)C VN02 025 0039 (1)C
gold plating 0.5 mm220 100 VN01 025 0035 (2)C VN02 025 0035 (2)C
0.75 - 1.0 mm218 100 VN01 025 0036 (2)C VN02 025 0036 (2)C
1.5 mm216 100 VN01 025 0037 (2)C VN02 025 0037 (2)C
2.5 mm214 100 VN01 025 0038 (2)C VN02 025 0038 (2)C
4.0 mm212 100 VN01 025 0039 (2)C VN02 025 0039 (2)C
Tools for turned contacts
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts FG 0300 146 7
Crimping tool for turned
single contacts
0.5 - 2.5 mm2
4 mm2
TA 0010 146 000 6
TA 0010 146 000 7
TA 0000 144
TA 0000 124
TA 0000
TA 0500
4-indet crimping tool for
turned contacts
TB 0600 146
Further tools see catalogue “Tools”
86
heavy
|
mate® F Characteristics 8 contacts module
General Characteristics Standard Value
Number of contacts 8
Termination technique crimp
Wire Gauge 0.5 – 4.0 mm² (AWG 20-12)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 400 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II (PA)
Rated impulse withstand voltage IEC 60664-1 6 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40/125/21
Upper temperature IEC 60512-11-9 +125°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥500 mating cycles
IP-degree of protection IEC 60529 IP00 (pin insert) / IP20 (socket insert)
Materials
Module PA6.6 GF
Colour module black
Contact CuZn (brass)
Contact plating Ag (silver) / Au (gold)
Derating Curves
In preparation
87
heavy
|
mate® F 8 contacts module + crimp contacts
Description Part Number Drawing Figure
38contacts module (Please order contacts separately)
Pin module C146 10A008 500 15
Socket module C146 10B008 500 15
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 2.5 mm crimp contacts single contact
silver plating 0.5 mm220 100 VN01 025 0035 (1)C VN02 025 0035 (1)C
0.75 - 1.0 mm218 100 VN01 025 0036 (1)C VN02 025 0036 (1)C
1.5 mm216 100 VN01 025 0037 (1)C VN02 025 0037 (1)C
2.5 mm214 100 VN01 025 0038 (1)C VN02 025 0038 (1)C
4.0 mm212 100 VN01 025 0039 (1)C VN02 025 0039 (1)C
gold plating 0.5 mm220 100 VN01 025 0035 (2)C VN02 025 0035 (2)C
0.75 - 1.0 mm218 100 VN01 025 0036 (2)C VN02 025 0036 (2)C
1.5 mm216 100 VN01 025 0037 (2)C VN02 025 0037 (2)C
2.5 mm214 100 VN01 025 0038 (2)C VN02 025 0038 (2)C
4.0 mm212 100 VN01 025 0039 (2)C VN02 025 0039 (2)C
Tools for turned contacts
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts FG 0300 146 7
Crimping tool for turned
single contacts
0.5 - 2.5 mm2
4 mm2
TA 0010 146 000 6
TA 0010 146 000 7
TA 0000 144
TA 0000 124
TA 0000
TA 0500
4-indet crimping tool for
turned contacts
TB 0600 146
Further tools see catalogue “Tools”
88
heavy
|
mate® F Characteristics 12 contacts module
General Characteristics Standard Value
Number of contacts 12
Termination technique crimp
Wire Gauge 0.14 – 2.5 mm² (AWG 26-14)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 250 V (conductor – earth)
400 V (conductor – conductor)
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II (PA)
Rated impulse withstand voltage IEC 60664-1 4 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40/100/21
Upper temperature IEC 60512-11-9 +100°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥500 mating cycles
IP-degree of protection IEC 60529 IP00 (pin insert) / IP20 (socket insert)
Materials
Module PA6.6 GF
Colour module black
Contact CuZn (brass)
Contact plating Ag (silver) / Au (gold)
Derating Curves
In preparation
89
heavy
|
mate® F 12 contacts module + crimp contacts
Description Part Number Drawing Figure
12 contacts module (Please order contacts separately)
Pin module C146 10A012 500 15
Socket module C146 10B012 500 15
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned crimp contacts single contact
silver plating 0.14 - 0.37 mm226 - 22 100 VN01 016 0024 (1)C VN02 016 0024 (1)C
0.5 mm220 100 VN01 016 0025 (1)C VN02 016 0025 (1)C
0.75 - 1.0 mm220 - 16 100 VN01 016 0026 (1)C VN02 016 0026 (1)C
1.5 mm216 - 15 100 VN01 016 0027 (1)C VN02 016 0027 (1)C
2.5 mm214 100 VN01 016 0028 (1)C VN02 016 0028 (1)C
gold plating 0.14 - 0.37 mm226 - 22 100 VN01 016 0024 (2)C VN02 016 0024 (2)C
0.5 mm220 100 VN01 016 0025 (2)C VN02 016 0025 (2)C
0.75 - 1.0 mm220 - 16 100 VN01 016 0026 (2)C VN02 016 0026 (2)C
1.5 mm216 - 15 100 VN01 016 0027 (2)C VN02 016 0027 (2)C
2.5 mm214 100 VN01 016 0028 (2)C VN02 016 0028 (2)C
Tools for turned contacts
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts - - - FG 0300 146 1
Service crimping tool 0.14 - 0.5 mm2
0.5 - 1.5 mm2
--TA 0100 146
Further tools see catalogue “Tools”
90
heavy
|
mate® F Characteristics 17 contacts module
General Characteristics Standard Value
Number of contacts 17
Termination technique crimp
Wire Gauge 0.14 –2.5mm² (AWG 26-14)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 160 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II (PA)
Rated impulse withstand voltage IEC 60664-1 2.5 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40/100/21
Upper temperature IEC 60512-11-9 +100°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥500 mating cycles
IP-degree of protection IEC 60529 IP00 (pin insert) / IP20 (socket insert)
Materials
Module PA6.6 GF
Colour module black
Contact CuZn (brass)
Contact plating Ag (silver) / Au (gold)
Derating Curves
In preparation
91
heavy
|
mate® F 17 contacts module + crimp contacts
Description Part Number Drawing Figure
17 contacts module (Please order contacts separately)
Pin module C146 10A017 500 15
Socket module C146 10B017 500 15
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned crimp contacts single contact
silver plating 0.14 - 0.37 mm226 - 22 100 VN01 016 0024 (1)C VN02 016 0024 (1)C
0.5 mm220 100 VN01 016 0025 (1)C VN02 016 0025 (1)C
0.75 - 1.0 mm220 - 16 100 VN01 016 0026 (1)C VN02 016 0026 (1)C
1.5 mm216 - 15 100 VN01 016 0027 (1)C VN02 016 0027 (1)C
2.5 mm214 100 VN01 016 0028 (1)C VN02 016 0028 (1)C
gold plating 0.14 - 0.37 mm226 - 22 100 VN01 016 0024 (2)C VN02 016 0024 (2)C
0.5 mm220 100 VN01 016 0025 (2)C VN02 016 0025 (2)C
0.75 - 1.0 mm220 - 16 100 VN01 016 0026 (2)C VN02 016 0026 (2)C
1.5 mm216 - 15 100 VN01 016 0027 (2)C VN02 016 0027 (2)C
2.5 mm214 100 VN01 016 0028 (2)C VN02 016 0028 (2)C
Tools for turned contacts
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts - - - FG 0300 146 1
Service crimping tool 0.14 - 0.5 mm2
0.5 - 1.5 mm2
--TA 0100 146
Further tools see catalogue “Tools”
92
heavy
|
mate® F Characteristics 20 contacts module
General Characteristics Standard Value
Number of contacts 20
Termination technique crimp
Wire Gauge 0.5 –4.0 mm² (AWG 20-12)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 500 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II (PA)
Rated impulse withstand voltage IEC 60664-1 6 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40/125/21
Upper temperature IEC 60512-11-9 +125°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥500 mating cycles
IP-degree of protection IEC 60529 IP00 (pin insert) / IP20 (socket insert)
Materials
Module PA6.6 GF
Colour module black
Contact CuZn (brass)
Contact plating Ag (silver) / Au (gold)
Derating Curves
In preparation
93
heavy
|
mate® F 20 contacts module + crimp contacts
Description Part Number Drawing Figure
20 contacts module (Please order contacts separately)
Pin module C146 10A020 500 15
Socket module C146 10B020 500 15
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 2.5 mm crimp contacts single contact
silver plating 0.5 mm220 100 VN01 025 0035 (1)C VN02 025 0035 (1)C
0.75 - 1.0 mm218 100 VN01 025 0036 (1)C VN02 025 0036 (1)C
1.5 mm216 100 VN01 025 0037 (1)C VN02 025 0037 (1)C
2.5 mm214 100 VN01 025 0038 (1)C VN02 025 0038 (1)C
4.0 mm212 100 VN01 025 0039 (1)C VN02 025 0039 (1)C
gold plating 0.5 mm220 100 VN01 025 0035 (2)C VN02 025 0035 (2)C
0.75 - 1.0 mm218 100 VN01 025 0036 (2)C VN02 025 0036 (2)C
1.5 mm216 100 VN01 025 0037 (2)C VN02 025 0037 (2)C
2.5 mm214 100 VN01 025 0038 (2)C VN02 025 0038 (2)C
4.0 mm212 100 VN01 025 0039 (2)C VN02 025 0039 (2)C
Tools for turned contacts
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts FG 0300 146 7
Crimping tool for turned
single contacts
0.5 - 2.5 mm2
4 mm2
TA 0010 146 000 6
TA 0010 146 000 7
TA 0000 144
TA 0000 124
TA 0000
TA 0500
4-indet crimping tool for
turned contacts
TB 0600 146
Further tools see catalogue “Tools”
94
• Rated voltage 400 V
• Rated current 42 A
• Termination: screw
• Number of contacts: 6
heavy
|
mate® HSE
95
heavy
|
mate® HSE Brief information
Approvals, Testhouse Characteristics Approval-Number
UL 600 V, 35 A 48932
CSA 600 V, 35 A E 63093
In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request.
96
heavy
|
mate® HSE Characteristics contact inserts
1) Label for CSA application see page 228
2) IP-degree of protection on termination side IP 10
General Characteristics Standard Value
Number of contacts 6 +
Termination technique screw
Wire gauge 0.5 - 6.0 mm2 (Ø 3.4 mm)
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 400 V (600 V UL / CSA1))
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II
Rated impulse withstand voltage IEC 60664-1 6 kV
Rated current IEC 60512-5-2 see derating curves
Rated current Tamp = 40 °C 42 A
Contact resistance IEC 60512-2-1 ≤ 1 m Ω
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
IP-degree of protection pin insert IEC 60529 unmated IP00 mated IP20
IP-degree of protection socket insert IEC 60529 unmated IP20 mated IP20
Weight pin insert 80 g
Weight socket insert 80 g
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Werkstoffe
Insert PA, GV
Colour insert black
Contacts Cu Zn (brass)
Contact plating Ag (silver)
97
heavy
|
mate® HSE Contact inserts 6 + | Size E 16 400 V/42 A Housings from page 162
Description Part Number Drawing Figure
Contact insert
6 +
Male insert
with wire protection
for screw termination
C146 10A006 102 5
Female insert
with wire protection
for screw termination
C146 10B006 102 5
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Derating curves
Curve a: 6 mm
2
screw contact
98
• Rated voltage 660 V
• Rated current 16 A ... 22 A
• Termination: screw
• 2 delayed mating contacts
• Number of contacts: 3, 6, 10, 16, 20, 26, 32
heavy
|
mate® HvE
99
heavy
|
mate® HvE Brief information
Approvals, Testhouse Characteristics Approval-Number
UL 600 V, 16 A E 63093
CSA 600 V, 16 A 48932
In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request.
100
heavy
|
mate® HvE General information
Construction of connectors Type HvE
The connectors of series
heavy
|
mate
®
HvE are based on series
heavy
|
mate
®
E with the following deviations:
Inserts
The HVE-inserts with 3, 6 and 10 contacts are basically the same
as the 10, 16 and 24-contacts inserts of series
heavy
|
mate
®
E.
However they are only partly loaded with contacts and have two
delayed mating pilot duty contacts.
Only type 16 HVE has special inserts with a different contact arrange-
ment. The mounting dimensions are however identical with the 24
contacts version of
heavy
|
mate
®
E.
The delayed mating contacts are intended for switching a relay coil for
electrically locking in order to have unloaded socket contacts in an
unmated condition.
If connectors without breaking capacity are used as connectors
with breaking capacity the electrical power data must be reduced
in accordance with the manufacturer's specification. These
specifications are available from the manufacturer.
heavy
|
mate
®
E inserts with pin contacts are not intermatable with
heavy
|
mate
®
HvE inserts with socket contacts due to
a) two empty contact holes are closed at 3, 6 and 10 contact inserts.
b) the 16 contacts HVE insert has a different contact arrangement.
Housings: (made of aluminium)
heavy
|
mate
®
E housings with an inside insulation (plastic foil) are
used for the 16-contacts insert.
The inside barriers at the narrow sides preventing mounting of 660
V-inserts in 400 V housings are removed and the
16-contacts insert is now mountable.
No standard for this series,but:
Intermateable and exchangeable
with other makes
a) Contact insert to contact insert
b) Contact insert to housing 6, 10 ,16, 24 pin
Housings are designed according to
DIN EN 175 301-801
First-to-mate last-to-break protective ground contact
101
heavy
|
mate® HvE Characteristics contact inserts
1) for working contacts, 400 V for mating contacts 2) Label for CSA application see page 228
3) Combination 10 and 16 ways, i.e. material PC and PA 4) IP-degree of protection on termination side IP 10
General Characteristics Standard Value
Number of contacts 3 6 10 16 20 26 3) 32
Termination technique screw
Wire gauge 0.25 - 2.5 mm2
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 660 V 1) (600 V UL / CSA2)
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 III a II IIIa 3) II
Rated impulse withstand voltage IEC 60664-1 8 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 m Ω
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40/125/21
Upper temperature IEC 60512-11-9 + 125°C
Lower temperature IEC 60512-11-10 - 40°C
Mechanical Characteristics
IP-degree of protection pin insert 4) IEC 60529 unmated IP00 mated IP20
IP-degree of protection socket insert 4) IEC 60529 unmated IP20 mated IP20
Weight pin insert 49 g 63 g 81 g
107 g 162 g 189 g
214 g
Weight socket insert 49 g 63 g 81 g
107 g 162 g 189 g
214 g
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Insert PC, GV
PA,GV
PC,GV
3)
PA,GV
Colour insert grey black grey 3) black
Contacts Cu Zn (brass)
Contact plating Ag (silver)
102
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Working contact
Mating contact
Without contact
Derating curves
Notice restriction of wire
Curve a: 1.5 mm2 screw contacts Curve b: 2.5 mm2 screw contacts
heavy
|
mate® HvE Contact inserts 3 + +2 | Size E10 | 660 V/16 A Housings from page 162
Description Part Number Drawing Figure
Contact insert
3 + + 2 (delayed mating contacts)
Male insert
with wire protection
for screw termination
C146 10A003 102 3
Female insert
with wire protection
for screw termination
C146 10B003 102 3
103
heavy
|
mate® HvE Contact inserts 6 + +2 | Size E16 | 660 V/16 A Housings from page 162
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Working contact
Mating contact
Without contact
Derating-Kurven
Notice restriction of wire
Curve a: 1.5 mm2 screw contacts Curve b: 2.5 mm2 screw contacts
Description Part Number Drawing Figure
Contact insert
6 + + 2 (delayed mating contacts)
Male insert
with wire protection
for screw termination
C146 10A006 102 3
Female insert
with wire protection
for screw termination
C146 10B006 102 3
104
heavy
|
mate® HvE Contact inserts
10 + +2 | Size E24 | 660 V/16 A
Housings from page 162
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Working contact
Mating contact
Without contact
Derating curves
Notice restriction of wire
Curve a: 1.5 mm2 screw contacts Curve b: 2.5 mm2 screw contacts
Description Part Number Drawing Figure
Contact insert
10 + + 2 (delayed mating contacts)
Male insert
with wire protection
for screw termination
C146 10A010 102 3
Female insert
with wire protection
for screw termination
C146 10B010 102 3
105
heavy
|
mate® HvE Contact inserts
16 + +2 | Size E24 | 660 V/16 A
Housings from page 162
Pin layout Assembly instruction
Male insert Female insert Panel cut out (insert)
Working contact
Mating contact
Without contact
Derating curves
Notice restriction of wire
Curve a: 1.5 mm2 screw contacts Curve b: 2.5 mm2 screw contacts
Description Part Number Drawing Figure
Contact insert
16 + + 2 (delayed mating contacts)
Male insert
with wire protection
for screw termination
C146 10A016 102 3
Male insert
without wire protection
for screw termination
C146 10A016 002 3
Female insert
with wire protection
for screw termination
C146 10B016 102 3
Female insert
without wire protection
for screw termination
C146 10B016 002 3
106
heavy
|
mate® HvE Contact inserts
32 + +4 | Size E48 | 660 V/16 A
Housings from page 162
Description Part Number Drawing Figure
Contact insert
32 + + 4 (delayed mating contacts)
Male insert
with wire protection
for screw termination
C146 10A016 102 3
(1 - 16) +
C146 10A016 104 3
(17 - 32)
Female insert
with wire protection
for screw termination
C146 10B016 102 3
(1 - 16) +
C146 10B016 104 3
(17 - 32)
Pin layout
Male insert Female insert
Working contact
Mating contact
Without contact
107
heavy
|
mate® HvE Your notes
108
• Power + signal as mixed arrangement
• Rated voltage up to 830 V
• Termination: screw, crimp
heavy
|
mate® K
109
heavy
|
mate® K Brief information
Approvals, Testhouse Characteristics Approval-Number
UL In preparation In preparation
CSA In preparation In preparation
110
heavy
|
mate® K Characteristics contact inserts 4 / 0 + 4 / 2
General requirements: Wire end ferrules must be used.
General Characteristics Standard Value
Number of contacts 4/0 (4 Power)
4/2 + PE (4 Power + 2 Signal)
Termination technique screw
Wire gauge 1.5 – 16 mm² (AWG 16-6)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 830 V/400 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 3
Material group IEC 60664-1 3b
Rated impulse withstand voltage IEC 60664-1 8.0 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40/125/21
Upper temperature IEC 60512-11-9 +125°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥500 mating cycles
Materials
Insert PC
Colour insert grey
Contacts Cu-alloy
Contact plating Ag (silver)
Derating Curves
In preparation
111
heavy
|
mate® K Contact inserts 4 / 0 + 4 / 2 | 830/ 400 V Housings from page 162
Description Part Number Drawing Figure
Contact insert 4/0
Male insert C146 10A004 100 13
Female insert C146 10B004 100 13
Pin layout
Male insert Female insert
Description Part Number Drawing Figure
Contact insert 4+2+PE
Male insert C146 10A006 100 13
Female insert C146 10B006 100 13
Pin layout
Male insert Female insert
112
heavy
|
mate® K Characteristics contact inserts
6 / 36 + PE
General Characteristics Standard Value
Number of contacts 6/36 + PE
Termination technique crimp
Wire gauge 1.5 – 6.0mm² (AWG 16-10)
0.14 – 2.5mm² (AWG 26-14)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 690 / 160V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 3
Material group IEC 60664-1 3b
Rated impulse withstand voltage IEC 60664-1 8.0 / 2.5 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 125°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥500 mating cycles
Materials
Insert PC
Colour insert grey
Contacts Cu-alloy
Contact plating Ag (silver) /Au (gold)
Derating Curves
In preparation
113
heavy
|
mate® K
Contact inserts 6 / 36 + PE | 690/ 160 V + crimp contacts
Housings from page 162
Description Part Number Drawing Figure
Contact insert 6 / 36 + PE (Please order contacts separately)
Male insert C146 10A042 500 13
Female insert C146 10B042 500 13
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 4 mm crimp contacts single contact
silver plating 1.5 mm² 16 100 VN01 040 0010 1C VN02 040 0010 1C
2.5 mm² 14 100 VN01 040 0011 1C VN02 040 0011 1C
4 mm² 12 100 VN01 040 0012 1C VN02 040 0012 1C
6 mm² 10 100 VN01 040 0013 1C VN02 040 0013 1C
Turned 1.6 mm crimp contacts single contact
silver plating 0.14 - 0.37 mm² 26-22 100 VN01 016 0024 1C VN02 016 0024 1C
0.5 mm² 20 100 VN01 016 0025 1C VN02 016 0025 1C
0.75 – 1.0 mm² 20-16 100 VN01 016 0026 1C VN02 016 0026 1C
1.5 mm² 16-15 100 VN01 016 0027 1C VN02 016 0027 1C
2.5 mm² 14 100 VN01 016 0028 1C VN02 016 0028 1C
Pin layout
Male insert Female insert
114
• Modular connector
• More module slots than heavy
|
mate® F
and market standard
• Rated voltage 63 - 1000 V
• Rated current 5 A ... 250 A
• Termination: crimp
heavy
|
mate® M
115
heavy
|
mate® M Brief information
Approvals, Testhouse Characteristics Approval-Number
VDE
Characteristics
see rated voltage
and rated current of each module
56 79 ÜG
SEV
UL E 63093
CSA 48932
In general approvals refer to representative versions of the connector series. Extent and specification of tests upon request.
116
heavy
|
mate® M General information
General information
• Modules inserts without crimp contacts, crimping tools see
separate catalogue “Tools”.
• Contacts must be ordered separatly, processing instructions see
catalogue “Tools”.
• Connectors series heavy
|
mate® M may be engaged or
disengaged when live but without electrical load.
If these connectors are mated or unmated under load, the load
shall be reduced to 10 % of rated current.
• We recommend using the high profile housings / hoods for the
heavy
|
mate® M inserts.
• Empty modul spaces have to be filled with blind modules.
• Torque for PE connection 1.8 Nm
Advantages of the system
• High combination possibilities
• Possibility of inverse configuration
• Rated voltage up to 1000 V
• Low cost
First-to-mate last-to-break protective ground contact
Minimum wire size 0.5 mm2
Modules
Frames
Range of housings
117
heavy
|
mate® M How to select a solution with series heavy
|
mate® M?
Requirements
• 3 x 400V; 50A; 6mm² wire gauge
• 8 x 250V; 8A; 1.5mm² wire gauge
• 5 x 400V; 15A; 4mm² wire gauge
Solution
1. Check how 16 contacts can be realized; see modules overview on page 118
Possible selection:
a) 1 x 20 contacts
b) 2 x 10 contacts
c) 1 x 10 contacts+ 1 x 5 contacts
d) 1 x 3 contacts + 1 x 5 contacts + 1 x 10 contacts
2. Check technical parameters / solution, see detail pages of the modules on pag 126
Possible selection:
a) not possible due to voltage
b) not possible due to voltage
c) not possible due to current
d) POSSIBLE
3. Choose matching contact, see detail page of the modules on page 126
Possible selection:
a) 3 contacts = C146 A03 001 E8 → contacts = VN01 036 0002 1C
b) 5 contacts = C146 A05 001 E8 → contacts = VN01 025 0033 1C
c) 10 contacts = C146 A10 001 E8 → contacts = VN01 016 0027 1XC
4. Choose matching frame, see frames on page 124
Solution: C146 P10 001 G8
5. Choose matching housing, see housings from page 162
Solution: C146 21R010 600 8
Schematic construction
118
heavy
|
mate® M Modules Overview
Description Part Number Drawing Figure
1 contact, Details see page 126
Pin Module C146 A01 001 E8
Socket Module C146 B01 004 E1
2 contacts for turned contacts, Details see page 128
Pin Module C146 A02 001 E8
Socket Module C146 B02 001 E8
2 contacts Powermodule, Details see page 130
Pin Module C146 A02 801 E8
Socket Module C146 B02 801 E8
119
heavy
|
mate® M Modules Overview
Description Part Number Drawing Figure
3 contacts for turned contacts, 1000 V, Details see page 132
Pin Module C146 A03 801 E8
Socket Module C146 B03 801 E8
3 contacts for turned contacts, 690 V, Details see page 134
Pin Module C146 A03 001 E8
Socket Module C146 B03 001 E8
5 contacts for stamped contacts, 1000 V, Details see page 136
Pin Module C146 D04 001 E8 (4 pol)
C146 D05 001 E8 (4 + PE)
C146 D05 801 E8 (5 pol)
Socket Module C146 C04 001 E8 (4 pol)
C146 C05 001 E8 (4 + PE)
C146 C05 801 E8 (5 pol)
120
Description Part Number Drawing Figure
5 contacts for turned contacts, 400 V, Details see page 138
Pin Module C146 A05 001 E8
Socket Module C146 B05 001 E8
10 contacts for stamped contacts, 400 V, Details see page 140
Pin Module C146 D10 001 E8
Socket Module C146 C10 001 G8
10 contacts for turned contacts, 400 V, Details see page 142
Pin Module C146 A10 001 E8
Socket Module C146 B10 001 E8
heavy
|
mate® M Modules Overview
121
Description Part Number Drawing Figure
20 contacts for stamped contacts, 100 V, Details see page 144
Pin Module C146 A20 001 G8
Socket Module C146 B20 001 G8
3 contacts for coax contacts , Details see page 146
Pin Module C146 A03 501 E8
Socket Module C146 B20 001 G8
RJ module, 400 V, Details see page 148
Pin Module C146 E12 001 E8
Socket Module C146 F12 001 G8
heavy
|
mate® M Modules Overview
122
Description Part Number Drawing Figure
Pneumatic module, 1 or 2 connections, Details see page 150
Pin Module C146 G01 014 G8 (2.5 mm)
C146 G01 024 G8 (4.0 mm)
C146 G02 014 G8 (2.5 mm)
C146 G02 024 G8 (4.0 mm)
Socket Module C146 H01 034 G8 (2.5 mm)
C146 H01 044 G8 (4.0 mm)
C146 H02 034 G8 (2.5 mm)
C146 H02 044 G8 (4.0 mm)
Shielded module 2x4 contacts for bus signals, 50 V, Details see page 152
Pin Module C146 A08 102 E8
C146 A05 100 G8
Socket Module C146 B08 102 E8
C146 B05 100 G8
heavy
|
mate® M Modules Overview
123
heavy
|
mate® M Your notes
124
heavy
|
mate® M Frames Housings from page 162
It is possible to mount socket modules in frames for pin modules (possibility of inverse configuration).
1) If connectors are mounted in non conductive housings both protective earthing terminals shall be mounted.
Description Part Number Drawing Figure
Frame for 2 modules | Size 6
Frame for pin modules C146 P06 001 G8
C146 P06 002 G8
(2 x PE)
Frame for socket modules C146 S06 001 G8
C146 S06 002 G8
(2 x PE)
Frame for 3 modules | Size 10
Frame for pin modules C146 P10 001 G8
C146 P10 002 G8
(2 x PE)
Frame for socket modules C146 S10 001 G8
C146 S10 002 G8
(2 x PE)
Frame for 5 modules | Size 16
Frame for pin modules C146 P16 001 G8
C146 P16 002 G8
(2 x PE)
Frame for socket modules C146 S16 001 G8
C146 S16 002 G8
(2 x PE)
125
heavy
|
mate® M Frames Housings from page 162
1) If connectors are mounted in non conductive housings both protective earthing terminals shall be mounted.
Description Part Number Drawing Figure
Frame for 7 modules | Size 24
Frame for pin modules C146 P24 001 G8
C146 P24 002 G8
(2 x PE)
Frame for pin modules C146 P24 101 G8
C146 P24 102 G8
(2 x PE)
Frame for socket modules C146 S24 001 G8
C146 S24 002 G8
(2 x PE)
Frame for socket modules C146 S24 101 G8
C146 S24 102 G8
(2 x PE)
126
heavy
|
mate® M Characteristics 1 contact module
General Characteristics Standard Value
Number of contacts 1
Termination technique crimp
Wire gauge 50 / 70 / 95 mm² (AWG 1/00/000)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 1000 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 3
Material group IEC 60664-1 2
Rated impulse withstand voltage IEC 60664-1 8.0 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 1 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 125°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
IP-degree of protection IEC 60529 20
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Module PA 6.6 GF
Colour module black
Contacts Cu-alloy
Contact plating Ag (silver)
Derating Curves
95 mm2
Curve Frame
a3 Modules
b1 Modules
127
heavy
|
mate® M 1 contact module + crimp contacts
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 10 mm crimp contacts
Single
contact
50 mm² 1 1 N01 100 6001 001 N02 100 6121 002
70 mm² 00 1 N01 100 6002 001 N02 100 6122 002
95 mm² 000 1 N01 100 6003 001 N02 100 6123 002
Tools
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Crimping dies 50 mm² TE 0500 103
70 mm² TE 0500 201
95 mm² TE 0500 301
For use in pneumatic crimping tool EK12042 by Klauke or AHPW 400C by Neko .
Further tools see catalogue “Tools”
Description Part Number Drawing Figure
1 contact module (Please order contacts separately)
Pin module C146 A01 001 E8
Socket module C146 B01 004 E8
128
heavy
|
mate® M Characteristics 2 contacts Radsok module for turned contacts
General Characteristics Standard Value
Number of contacts 2
Termination technique crimp
Wire gauge 16 / 25 / 35 mm2 (AWG 6/4/2)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 1000 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 3
Material group IEC 60664-1 2
Rated impulse withstand voltage IEC 60664-1 8.0 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 1 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 125°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
IP-degree of protection IEC 60529 20
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Module PA 6.6 GF
Colour module black
Contacts Cu-alloy
Contact plating Ag (silver)
Derating Curves
16 mm2 / 25 mm2 / 35 mm2
Curve Frame
a
6 contacts 16 mm2
b
2 contacts 16 mm2
c
6 contacts 25 mm2
d
2 contacts 25 mm2
e
6 contacts 35 mm2
f
2 contacts 35 mm2
129
heavy
|
mate® M 2 contacts Radsok module + crimp contacts
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 6 mm crimp contacts
Single
contact
16 mm261N01 060 0007 1 N02 060 6117 001
25 mm24N01 060 0004 1 N02 060 6114 001
35 mm22N01 060 0008 1 N02 060 6118 001
Cable lug for earth connection
Single
contact
16 mm261N15 043 0003 003
Tools
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Crimping dies 16 mm² - TE 0600 062 -
25 mm² - TE 0600 042 -
35 mm² - TE 0600 022 -
Further tools see catalogue “Tools”
Description Part Number Drawing Figure
2 contacts module for turned contacts (Please order contacts separately)
Pin module C146 A02 001 E8
Socket module C146 B02 001 E8
130
heavy
|
mate® M Characteristics 2 contacts Powermodule
General Characteristics Standard Value
Number of contacts 2
Termination technique crimp
Wire gauge 16 mm2 (AWG 6)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 1000 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 3
Material group IEC 60664-1 2
Rated impulse withstand voltage IEC 60664-1 8.0 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 1 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 125°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
IP-degree of protection IEC 60512-9-1 ≥ 500 Steckzyklen
Mechanical operation IEC 60529 20
Materials
Module PA 6.6 GF
Colour module black
Contacts Cu-alloy
Contact plating Ag (silver)
Derating Curves
16 mm2
Curve Frame
a1 Modules
b3 Modules
c7 Modules
General requirements
•Due to reduced cross sections at PE contacts of frames, the PE
contact has to be additionally protected against short circuits by
using a protection circuit offering a sufficiently short breaking
time (<0.25s).
• Parts to be used as connectors, not as plug devices (connector with
breaking capacity). Do not mate under current or voltage!
131
heavy
|
mate® M 2 contacts Powermodule + crimp contacts
1) For use in pneumatic crimping tool EK12042 by Klauke or AHPW 400C by Neko .
Tools
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Crimping dies 16 mm² - - TE 0600 063 1)
Removal tool for contacts - - FG 0300 146 3
Removal tool for modules - - FG 1000 146
Further tools see catalogue “Tools”
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 3.6 mm crimp contacts
Single
contact
16 mm26 100 VN01 036 0021 1C VN02 036 0021 1C
Cable lug for earth connection
Single
contact
16 mm261N 15 043 0003 003
Description Part Number Drawing Figure
2 contacts module (Please order contacts separately)
Pin module C146 A02 801 E8
Socket module C146 B02 801 E8
132
heavy
|
mate® M Characteristics 3 contacts module
1) 630 V if the modules are used as plug and socket device
General Characteristics Standard Value
Number of contacts 3
Termination technique crimp
Wire gauge 1.5 - 10 mm2 (AWG 16 - 8)
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 1000 V 1)
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II
Rated impulse withstand voltage IEC 60664-1 8.0 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 1 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
IP-degree of protection IEC 60529 20
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Module PA 6.6 GF
Colour module black
Contacts Cu-alloy
Contact plating Ag (silver)
Derating Curves
1.5 mm2 2.5 mm2
4 mm2 6 mm2
10 mm2
Curve Frame
a7 Modules
b3 Modules
c1 Modules
Curve Frame
a
3-7 Modules
b2 Modules
c1 Modules
Curve Frame
a7 Modules
b3 Modules
c2 Modules
d1 Modules
Curve Frame
a7 Modules
b3 Modules
c2 Modules
d1 Modules
Curve Frame
a
5-7 Modules
b3 Modules
c2 Modules
d1 Modules
133
heavy
|
mate® M 3 contacts module + crimp contacts
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 3.6 mm crimp contacts (All contacts 2mm first-to-mate to other modules)
1.5 mm216 100 VN01 036 0004 (1)C VN02 036 0004 (1)C
2.5 mm214 100 VN01 036 0005 (1)C VN02 036 0005 (1)C
4.0 mm212 100 VN01 036 0001 (1)C VN02 036 0001 (1)C
6.0 mm210 100
VN01 036 0002 (1)C 1) VN02 036 0002 (1)C 1)
10.0 mm28 100
VN01 036 0003 (1)C 1) VN02 036 0003 (1)C 1)
1)
For wire gauges 6 + 10 mm2 cable lugs have to be used for PE connection
2) Incl. calibration pin set, locator
Tools
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts - - - FG 0300 146 3
Removal tool for modules - - - FG 1000 146
Crimping tool
for single contacts
1.5 - 2.5 mm2
4.0 mm2
6.0 mm2
TA 0010 146 000 2
TA 0010 146 000 4
TA 0010 146 000 4
TA 0000 144
TA 0000 124
TA 0000 124
TA 0000
4-ondet crimping tool 2) 1.5 -10.0 mm2-- TB 0200 146
Crimping tool for cable
lugs
6.0 mm2
10.0 mm2
- TA 0000 180 TA 0000
Cable lugs for PE connection Pieces Part Number
Cable lug 6.0 mm2
10.0 mm2
-20
20
N15 006 000 9Z
N15 010 000 7Z
Further tools see catalogue “Tools”
Description Part Number Drawing Figure
3 contacts module (Please order contacts separately)
Pin module C146 A03 801 E8
Socket module C146 B03 801 E8
134
heavy
|
mate® M Characteristics 3 contacts module
General Characteristics Standard Value
Number of contacts 3
Termination technique crimp
Wire gauge 1.5 - 10 mm2 (AWG 16 - 8)
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 630 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II (PA)
Rated impulse withstand voltage IEC 60664-1 8.0 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 1 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 6051211-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Module PA 6.6 GF
Colour module black
Contacts Cu-alloy
Contact plating Ag (silver)
Derating Curves
1.5 mm2 2.5 mm2
4 mm2 6 mm2
10 mm2
Curve Frame
a7 Modules
b3 Modules
c1 Modules
Curve Frame
a
3-7 Modules
b2 Modules
c1 Modules
Curve Frame
a7 Modules
b3 Modules
c2 Modules
d1 Modules
Curve Frame
a7 Modules
b3 Modules
c2 Modules
d1 Modules
Curve Frame
a
5-7 Modules
b3 Modules
c2 Modules
d1 Modules
135
heavy
|
mate® M 3 contacts module + crimp contacts
Stripping length see page 249-251
1)
For wire gauges 6 + 10 mm2 cable lugs have to be used for PE
connection
2) Incl. calibration pin set, locator
Tools
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts - - - FG 0300 146 3
Removal tool for modules - - - FG 1000 146
Crimping tool
for single contacts
1.5 - 2.5 mm2
4.0 mm2
6.0 mm2
TA 0010 146 000 5
TA 0010 146 000 4
TA 0010 146 000 4
TA 0000 144
TA 0000 124
TA 0000 124
TA 0000
4-indet crimping tool 2) 1.5 -10.0 mm2-- TB 0200 146
Crimping tool for cable
lugs
6.0 mm2
10.0 mm2
- TA 0000 180 TA 0000
Cable lugs for PE connection Pieces Part Number
Cable lug 6.0 mm2
10.0 mm2
-20
20
N15 006 000 9Z
N15 010 000 7Z
Further tools see catalogue “Tools”
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 3.6 mm crimp contacts single contact
silver plating 1.5 mm216 100 VN01 036 0004 (1)C VN02 036 0004 (1)C
2.5 mm214 100 VN01 036 0005 (1)C VN02 036 0005 (1)C
4.0 mm212 100 VN01 036 0001 (1)C VN02 036 0001 (1)C
6.0 mm210 100
VN01 036 0002 (1)C
1)
VN02 036 0002 (1)C
1)
10.0 mm28 100
VN01 036 0003 (1)C
1)
VN02 036 0003 (1)C
1)
Description Part Number Drawing Figure
3 contacts module (Please order contacts separately)
Pin module C146 A03 001 E8
Socket module C146 B03 001 E8
136
Derating Curves
1.5 mm2 2.5 mm2
4 mm2
Curve Frame
a7 Modules
b5 Modules
c3 Modules
d
1+2 Modules
heavy
|
mate® M Characteristics 4 contacts, 4 + , 5 contacts module for stamped contacts
1) 630 V if the modules are used as plug and socket device
General Characteristics Standard Value
Number of contacts 4 + / 5
Termination technique crimp
Wire gauge 0.5 - 4.0 mm2 (AWG 20 - 12)
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 1000 V 1)
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II
Rated impulse withstand voltage IEC 60664-1 8.0 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance
IEC 60512-3-1
≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
IP-degree of protection IEC 60529 20
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Module PA 6.6 GF
Colour module black
Male contacts CuZn (brass)
Female contacts CuSn (bronce)
Contact plating Ag (silver)
Curve Frame
a7 Modules
b5 Modules
c3 Modules
d2 Modules
d1 Modules
Curve Frame
a7 Modules
b
3-5 Modules
c2 Modules
d1 Modules
137
heavy
|
mate® M 4 contacts, 4 + , 5 contacts module + crimp contacts
Stripping length see page 249-251
Tools
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts - - - FG 0200 146 1
Removal tool for modules - - - FG 1000 146
Crimping tool
for single contacts
0.5 - 1.5 mm2
1.5 - 2.5 mm2
2.5 - 4.0 mm2
TA 0004 146 000 1
TA 0005 146 000 3
TA 0003 146 000 1
TA 0000 163
TA 0000 141
TA 0000 121
TA 0000
Further tools see catalogue “Tools”
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Stamped single contacts
silver plating 0.5 - 1.5 mm220 - 16 100 VN01 025 0001 (101) VN02 025 0001 (101)
1.5 - 2.5 mm216 - 14 100 VN01 025 0010 (101) VN02 025 0010 (101)
2.5 - 4.0 mm212 100 VN01 025 0043 (1) VN02 025 0043 (1)
gold plating 0.5 - 1.5 mm220 - 16 100 VN01 025 0001 (102) VN02 025 0001 (102)
1.5 - 2.5 mm216 - 14 100 VN01 025 0010 (102) VN02 025 0010 (102)
Stamped Contacts on reel for hand crimp tools
silver plating 0.5 - 1.5 mm220 - 16 2000 TN01 025 0001 (1) TN02 025 0001 (1)
1.5 - 2.5 mm216 - 14 2000 TN01 025 0010 (1) TN02 025 0010 (1)
gold plating 0.5 - 1.5 mm220 - 16 2000 TN01 025 0001 (2) TN02 025 0001 (2)
1.5 - 2.5 mm216 - 14 2000 TN01 025 0010 (2) TN02 025 0010 (2)
Contacts on reel for crimp machines contact feeding left hand side
silver plating 0.5 - 1.5 mm220 - 16 2000 TN01 025 0001 (1) TN02 025 0001 (1)
1.5 - 2.5 mm216 - 14 2000 TN01 025 0010 (1) TN02 025 0010 (1)
2.5 - 4 mm212 2000 TN01 025 0043 (1) TN02 025 0043 (1)
Description Part Number Drawing Figure
4 contacts, 4 + , 5 contacts module, PE contact 2 mm first-to-mate (Please order contacts separately)
Pin module C146 D04 001 E8 (4 pol)
C146 D05 001 E8 (4 +PE)
C146 D05 801 E8 (5 pol)
Socket module C146 C04 001 E8 (4 pol)
C146 C05 001 E8 (4 + PE)
C146 C05 801 E8 (5 pol)
11,4
2,4
5,0
34
40,4
11,4
3,4
6,8
34
11,4
3,4
6,8
34
11,4
2,4
5,0
34
42,9
138
heavy
|
mate® M Characteristics 5 contacts module for turned contacts
General Characteristics Standard Value
Number of contacts 5
Termination technique crimp
Wire gauge 0.5 - 4.0 mm2 (AWG 20 - 12)
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 400 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II
Rated impulse withstand voltage IEC 60664-1 6.0 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 2 mΩ
Insulation resistance
IEC 60512-3-1
≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Module PA 6.6 GF
Colour module black
Contacts Cu-alloy
Contact plating Ag (silver)
Derating Curves
2.5 mm2 4 mm2
Curve Frame
a7 Modules
b5 Modules
c3 Modules
d2 Modules
d1 Modules
Curve Frame
a7 Modules
b5 Modules
c3 Modules
d
1+2 Modules
139
heavy
|
mate® M 5 contacts module + crimp contacts
Stripping length see page 249-251
Tools
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts - - - FG 0300 146 4
Removal tool for modules - - - FG 1000 146
Crimping tool
for single contacts
0.5 - 2.5 mm2
4.0 mm2
TA 0010 146 000 2
TA 0010 146 000 3
TA 0000 144
TA 0000 124
TA 0000
Further tools see catalogue “Tools”
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 2.5 mm crimp contacts single contact
silver plating 0.5 mm220 100 VN01 025 0029 (1)C VN02 025 0029 (1)C
0.75 - 1.0 mm218 100 VN01 025 0030 (1)C VN02 025 0030 (1)C
1.5 mm216 100 VN01 025 0031 (1)C VN02 025 0031 (1)C
2.5 mm214 100 VN01 025 0032 (1)C VN02 025 0032 (1)C
4.0 mm212 100 VN01 025 0033 (1)C VN02 025 0033 (1)C
Description Part Number Drawing Figure
5 contacts module (Please order contacts separately)
Pin module C146 A05 001 E8
Socket module C146 B05 001 E8
140
heavy
|
mate® M Characteristics 10 contacts module for stamped contacts
General Characteristics Standard Value
Number of contacts 10
Termination technique crimp
Wire gauge 0.14 - 2.5 mm2 (AWG 26 - 14)
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 400 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II
Rated impulse withstand voltage IEC 60664-1 6.0 KV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance
IEC 60512-3-1
≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Module PA 6.6 GF
Colour module black
Male contacts CuZn (brass)
Female contacts CuSn (bronce)
Contact plating Ag (silver)
Derating Curves
0.5 mm2 1.5 mm2
Curve Frame
a
5-7 Modules
b3 Modules
c2 Modules
d1 Modules
Curve Frame
a
5-7 Modules
b3 Modules
c2 Modules
d1 Modules
141
heavy
|
mate® M 10 contacts module + crimp contacts
Stripping length see page 249-251
Tools
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for
contacts/ modules
---
FG 0300 146 1 /
FG 1000 146
Service crimping tool 0.14 - 0.5 mm2
0.5 - 1.5 mm2
-- TA 0100 146
Crimping tool
for single contacts
0.14 - 0.5 mm2
0.5 - 1.5 mm2
1.5 - 2.5 mm2
TA 0001 146 000 1
TA 0002 146 000 1
TA 0007 146 000 3
TA 0000 202
TA 0000 163
TA 0000 141
TA 0000
Further tools see catalogue “Tools”
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Stamped1.6 mm single contact
silver plating 0.14 - 0.5 mm2
26 - 20
100 VN01 016 0003 (1) VN02 016 0003 (1)
0.5 - 1.5 mm2
20 - 16
100 VN01 016 0002 (1) VN02 016 0002 (1)
1.5 - 2.5 mm2
16 - 14
100 VN01 016 0005 (1) VN02 016 0005 (1)
gold plating 0.14 - 0.5 mm2
26 - 20
100 VN01 016 0003 (2) VN02 016 0003 (2)
0.5 - 1.5 mm2
20 - 16
100 VN01 016 0002 (2) VN02 016 0002 (2)
1.5 - 2.5 mm2
16 - 14
100 VN01 016 0005 (2) VN02 016 0005 (2)
Stamped Contacts on reel for hand crimp tools
silver plating
Standard
0.14 - 0.5 mm226 - 20 200 ZN01 016 0003 (1) ZN02 016 0003 (1)
0.5 - 1.5 mm220 - 16 200 ZN01 016 0002 (1) ZN02 016 0002 (1)
1.5 - 2.5 mm216 - 14 200 ZN01 016 0005 (1) ZN02 016 0005 (1)
silver plating
High current
0.5 - 1.5 mm220 - 16 200 ZN01 016 0015 (1) ZN02 016 0015 (1)
1.5 - 2.5 mm216 - 14 200 ZN01 016 0016 (1) ZN02 016 0016 (1)
gold plating
Standard
0.14 - 0.5 mm226 - 20 200 ZN01 016 0003 (2) ZN02 016 0003 (2)
0.5 - 1.5 mm220 - 16 200 ZN01 016 0002 (2) ZN02 016 0002 (2)
1.5 - 2.5 mm216 - 14 200 ZN01 016 0005 (2) ZN02 016 0005 (2)
Stamped Contacts on reel for crimp machines contact feeding left hand side
silver plating
Standard
0.14 - 0.5 mm226 - 20 2000 TN01 016 0003 (1) TN02 016 0003 (1)
0.5 - 1.5 mm220 - 16 2000 TN01 016 0002 (1) TN02 016 0002 (1)
1.5 - 2.5 mm216 - 14 2000 TN01 016 0005 (1) TN02 016 0005 (1)
silver plating
High current
0.5 - 1.5 mm220 - 16 2000 TN01 016 0015 (1) TN02 016 0015 (1)
1.5 - 2.5 mm218 - 14 2000 TN01 016 0016 (1) TN02 016 0016 (1)
gold plating
Standard
0.14 - 0.5 mm226 - 20 2000 TN01 016 0003 (2) TN02 016 0003 (2)
0.5 - 1.5 mm220 - 16 2000 TN01 016 0002 (2) TN02 016 0002 (2)
1.5 - 2.5 mm216 - 14 2000 TN01 016 0005 (2) TN02 016 0005 (2)
Description Part Number Drawing Figure
10 contacts module (Please order contacts separately)
Pin module C146 D10 001 E8
Socket module C146 C10 001 G8
142
heavy
|
mate® M Characteristics 10 contacts module for turned contacts
General Characteristics Standard Value
Number of contacts 10
Termination technique crimp
Wire gauge 0.14 - 2.5 mm2 (AWG 26 - 14)
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 400 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II (PA)
Rated impulse withstand voltage IEC 60664-1 6.0 kV
Current carrying capacity IEC 60512-5-2 siehe Derating Kurven
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance
IEC 60512-3-1
≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 100 / 21
Upper temperature IEC 60512-11-9 + 100 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 Steckzyklen
Materials
Module PA 6.6 GF
Colour module black
Contacts CuZn (brass)
Contact plating Ag (silver)
Derating Curves
0.5 mm2 1.5 mm2
Curve Frame
a7 Modules
b
3-5 Modules
c2 Modules
d1 Modules
Curve Frame
a7 Modules
b
3-5 Modules
c2 Modules
d1 Modules
143
heavy
|
mate® M 10 contacts module + crimp contacts
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 1.6 mm crimp contacts single contact
silver plating
0.14 - 0.37mm
2
26 - 22 100 VN01 016 0024 (1)C VN02 016 0024 (1)C
0.5 mm
2
20 100 VN01 016 0025 (1)C VN02 016 0025 (1)C
0.75 - 1.0 mm
2
20 - 16 100 VN01 016 0026 (1)C VN02 016 0026 (1)C
1.5 mm
2
16 - 15 100 VN01 016 0027 (1)C VN02 016 0027 (1)C
2.5 mm
2
14 100 VN01 016 0028 (1)C VN02 016 0028 (1)C
gold plating
0.14 - 0.37mm
2
26 - 22 100 VN01 016 0024 (2)C VN02 016 0024 (2)C
0.5 mm
2
20 100 VN01 016 0025 (2)C VN02 016 0025 (2)C
0.75 - 1.0 mm
2
20 - 16 100 VN01 016 0026 (2)C VN02 016 0026 (2)C
1.5 mm
2
16 - 15 100 VN01 016 0027 (2)C VN02 016 0027 (2)C
2.5 mm
2
14 100 VN01 016 0028 (2)C VN02 016 0028 (2)C
FO contacts
single
contact
1.0 mm POF – 10 VN01 016 0040 (8) X VN02 016 0040 (8) X
Stripping length see page 249-251 1) Incl. stripping tool, locator, abrasive adapter
For small wire sizes, the use of guide elements is recommended (see page 226)
Tools
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts - - - FG 0300 146 1
Removal tool for modules - - - FG 1000 146
Crimping tool
for single contacts
0.14 - 1.0 mm2
1.5 mm2
2.5 mm2
TA 0010 146 000 1 TA 0000 184 TA 0000
Crimpzange für LWL Kontakte 1)
1.0 mm POF/FO - - TB 0500 146
Further tools see catalogue “Tools”
Description Part Number Drawing Figure
10 contacts module (Please order contacts separately)
Pin module C146 A10 001 E8
Socket module C146 B10 001 E8
144
Derating-Kurven
0.25 mm2 0.5 mm2
Curve Frame
a7 Modules
b5 Modules
c3 Modules
d2 Modules
e1 Modules
heavy
|
mate® M Characteristics 20 contacts module
General Characteristics Standard Value
Number of contacts 20
Termination technique crimp
Wire gauge 0.09 - 0.5 mm2 (AWG 28 - 20)
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 63 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II (PA)
Rated impulse withstand voltage IEC 60664-1 4.0 KV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance
IEC 60512-3-1
≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Module PA 6.6 GF
Colour module black
Male contacts CuZn (brass)
Female contacts CuSn (bronce)
Contact plating Au (gold)
Curve Frame
a7 Modules
b5 Modules
c3 Modules
d2 Modules
e1 Modules
145
heavy
|
mate® M 20 contacts module + crimp contacts
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Stamped 1.0 mm single contacts for hand crimping tools
gold plating 0.09 - 0.25 mm228 - 24 100 VN01 010 0130 (2) VN02 010 0130 (2)
0.25 - 0.50 mm224 - 20 100 VN01 010 0131 (2) VN02 010 0131 (2)
Stamped Contacts on reel for hand crimp tools
gold plating 0.09 - 0.25 mm228 - 24 350 ZN01 010 0130 (2) ZN02 010 0130 (2)
0.25 - 0.50 mm224 - 20 350 ZN01 010 0131 (2) ZN02 010 0131 (2)
Stamped contacts on reel for crimp machines contact feeding left hand side
gold plating 0.09 - 0.25 mm228 - 24 2000 TN01 010 0130 (2) TN02 010 0130 (2)
0.25 - 0.50 mm2 24 - 20 2000 TN01 010 0131 (2) TN02 010 0131 (2)
Stripping length see page 249-251
If small wire sizes are used, guide pins and guide sockets should be prefered to use (see page 226)
Tools
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Removal tool for contacts - - - 17D 438 SP
Removal tool for modules - - - FG 1000 146
Service crimping tool 0.09 - 0.25 mm2
0.25 - 0.50 mm2
-- TA 0200 146
Further tools see catalogue “Tools”
Description Part Number Drawing Figure
20 contacts module (Please order contacts separately)
Pin module C146 A20 001 G8
Socket module C146 B20 001 G8
146
heavy
|
mate® M Characteristics 3 contacts module for coax contacts
General Characteristics Standard Value
Number of contacts 3
Termination technique crimp, solder
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 250 V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 III
Material group IEC 60664-1 II
Impedance 50 Ω
Working frequency 2 GHz
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Module PA 6.6 GF
Colour module redbrown
Contact plating Au (gold)
Contact dimensions
Male contact Part Number B D E F G
17 DM 537 401 23.6 1.7 7.9 6.3 2
Female contact 17 DM 537 421 23.6 1.7 7.9 6.3 2
17 DM 537 405 26.3 3.2 9.5 7.9 2
Stripping dimensions 17 DM 537 425 26.3 3.2 9.5 7.9 2
147
heavy
|
mate® M 3 contacts module for coax contacts + crimp contacts
1) Further contacts on request
Tools
Description for cable size 6-hex-size in mm Part Number
Crimping dies Tool
Removal tool for contacts - - - FG 0300 146 3
Removal tool for modules - - - FG 1000 146
Crimping tool for single
contacts
RG 58 5.4 (6.5) (1.7) TA 0000 401 TA 0000
RG 174, 179, 316 3.25 (4.5) (1.7) TA 0000 402 TA 0000
Further tools see catalogue “Tools”
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Single contacts 1)
RG 174, 179, 316 1 17 DM 537 401 17 DM 537 421
RG 58 1 17 DM 537 405 17 DM 537 425
Description Part Number Drawing Figure
3 contacts module for coax contacts (Please order contacts separately)
Pin module C146 A03 501 E8
Socket module C146 B03 501 E8
148
heavy
|
mate® M Characteristics RJ module
1) 2 Modules, 40°C ambient temperature, 1.5 mm2 Wire gauge
General Characteristics Standard Value module Value RJ45
Number of contacts 4 8
Termination technique crimp mate
Wire gauge 0.14 - 2.5mm2
Flammability UL 94 V-0 V - 0
Electrical Characteristics
Rated voltage IEC 60664-1 400 V AC 125 V AC
Rated impulse withstand voltage IEC 60664-1 6 kV 1.8 kV
Current carrying capacity IEC 60512-5-2 13 A1) 1.5 A
Contact resistance IEC 60512-2-1 ≤ 5 mΩ ≤ 20 mΩ
Insulation resistance IEC 60512-3-1 1010Ω 58Ω
Climatical Characteristics
Upper temperature IEC 60512-11-9 + 100 °C + 80 °C
Lower temperature IEC 60512-11-10 - 20 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles ≥ 500 mating cycles
Materials
Module PA 6.6 GF
Colour module black black
Male contacts CuZn (brass) CuSn (bronce)
Female contacts CuZn (brass) CuSn (bronce)
Contact plating Ag (silver) Au (gold)
Brief information
• For integration of standard RJ45 components
• Worldwide real-time access on machines and facilities
• Easy assembly through the use of standard RJ45 components
• One connector for power, signal and data transmission
• 4 additional power crimp contacts
• Time- and money saving through the use of similar active- and passive components
• Unitary transmission protocol in the office- and production environment.
• Meets CAT 5 for Ethernet acc. ISO/IEC 11801
149
heavy
|
mate® M RJ module + crimp contacts
1) If plug socket receded: 46,8
Description Part Number Drawing Figure
RJ module
Pin module C146 E12 001 E8
Socket module C146 F12 001 G8
1)
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 1.6 mm single contacts
silver plating
0.14 - 0.37 mm
2
26 - 22 100 VN01 016 0024 (1)C VN02 016 0024 (1)C
0.5 mm
2
20 100 VN01 016 0025 (1)C VN02 016 0025 (1)C
0.75 - 1.0 mm
2
20 - 16 100 VN01 016 0026 (1)C VN02 016 0026 (1)C
1.5 mm
2
16 - 15 100 VN01 016 0027 (1)C VN02 016 0027 (1)C
2.5 mm
2
14 100 VN01 016 0028 (1)C VN02 016 0028 (1)C
gold plating
0.14 - 0.37 mm
2
26 - 22 100 VN01 016 0024 (2)C VN02 016 0024 (2)C
0.5 mm
2
20 100 VN01 016 0025 (2)C VN02 016 0025 (2)C
0.75 - 1.0 mm
2
20 - 16 100 VN01 016 0026 (2)C VN02 016 0026 (2)C
1.5 mm
2
16 - 15 100 VN01 016 0027 (2)C VN02 016 0027 (2)C
2.5 mm
2
14 100 VN01 016 0028 (2)C VN02 016 0028 (2)C
150
heavy
|
mate® M Characteristics Pneumatic module
1)
The modules are specifically designed for the use of PTFE tubes and should only be used in conjunction with these. The use of
tubes made from other materials is not recommended, as the higher and lower category temperatures will not be achievable.
General Characteristics Standard Value
Number of contacts 1 / 2
Termination technique tube termination
Wire gauge 2.5 mm / 4.0 mm
Flammability UL 94 V-0
Technical Characteristics
Operating pressure 8 bar with PTFE tube
Operating path 4.0 mm
Locking locking on one side
Pneumatic tube only use PTFE tubes 1)
Climatical Characteristics
Upper temperature +100 °C
Lower temperature - 20 °C
Mechanical Characteristics
Mechanical operation 5000 mating cycles
Materials
Module PA 6.6 GF
Colour module black
Contacts Brass MS 58
Brief information
• Power, signal and pneumatic within a single connector
• Very stable brass contacts
• Pneumatic socket contacts with barrier, closes when the connector is open
• Available with single or double connections
• Connection for 2.5 mm or 4 mm PTFE (Teflon)-tubes
• Tubes can be disassembled from the terminations
151
heavy
|
mate® M Pneumatic module + crimp contacts
Description Part Number Drawing Figure
Pneumatic module
Pin module C146 G01 014 G8 (2.5 mm)
C146 G01 024 G8 (4.0 mm)
Socket module C146 H01 034 G8 (2.5 mm)
C146 H01 044 G8 (4.0 mm)
Pin module C146 G02 014 G8 (2.5 mm)
C146 G02 024 G8 (4.0 mm)
Socket module C146 H02 034 G8 (2.5 mm)
C146 H02 044 G8 (4.0 mm)
152
heavy
|
mate® M Characteristics Shielded module
Modules for shielding surrender independently of the housing. For the transmission of bus signals.
General Characteristics Standard Value
Number of contacts 2X4
Termination technique crimp
Wire gauge 0.14 – 2.5 mm2 (AWG 26-14)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 50V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 3
Material group IEC 60664-1 3b
Rated impulse withstand voltage IEC 60664-1 0.8 kV
Current carrying capacity IEC 60512-5-2 10A
Contact resistance IEC 60512-2-1 ≤ 5mΩ
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Upper temperature IEC 60512-11-9 125°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Module PC
Colour module grey
Contacts Cu-alloy
Contact plating Au (gold)
153
heavy
|
mate® M Shielded module + crimp contacts
Description Part Number Drawing Figure
Contact insert 2x4 contacts (Please order contacts separately)
Pin module C146 A08 102 E8
Male contact carriers
4 contacts
C146 A05 100 G8
Socket module C146 B08 102 E8
Female contact carriers
4 contacts
C146 B05 100 G8
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 1.6mm crimp contacts
Single 0.14 – 0.37 mm² 26-22 100 VN01 016 0024 2C VN02 016 0024 2C
contacts 0.5 mm² 20 100 VN01 016 0025 2C VN02 016 0025 2C
0.75 – 1.0 mm² 20-16 100 VN01 016 0026 2C VN02 016 0026 2C
1.5 mm² 16-15 100 VN01 016 0027 2C VN02 016 0027 2C
2.5 mm² 14 100 VN01 016 0028 2C VN02 016 0028 2C
Tools
Description for wire gauge Part Number
Contact locator Crimping dies Tool
Crimping tool - - - TA 0000 oder TA 0500
Crimping dies - - - TA 00000 184
Contact locator - - - TA 0010 146 000 1
Removal tool for contacts - - - FG 0300 146 1
Further tools see catalogue “Tools”
154
heavy
|
mate® M Removal tools, accesoires
Contact size Part Number Figure
1.0 mm 17D 438 SP
1.6 mm FG 0300 146 1
2.5 mm turned FG 0300 146 4
2.5 mm stamped FG 0200 146 1
3.6 mm FG 0300 146 3
155
heavy
|
mate® M Removal tools, accesoires
Contact size Part Number Figure
Removal tool for modules FG 1000 146
Blank modules C146 A00 001 E8 (pin)
C146 B00 001 E8 (socket)
Module coupler C146 10Z000 002 8
Assembly angle C146 10Z001 001 8
Strain relief C146 10Z002 001 8
156
• Compact design
• Even in a metal housing
• Rated voltage up to 500 V
• Numbers of contacts: 5 + PE, 7 + PE
heavy
|
mate® Q
157
heavy
|
mate® Q Brief information
Approvals, Testhouse Characteristics Approval-Number
UL In preparation In preparation
CSA In preparation In preparation
158
heavy
|
mate® Q Characteristics contact inserts 5 + PE
General Characteristics Standard Value
Number of contacts 5 + PE
Termination technique crimp
Wire gauge 0.5 – 4.0 mm² (AWG 20-12)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 400 V (conductor – conductor)
230 V (conductor – earth)
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 3
Material group IEC 60664-1 3b
Rated impulse withstand voltage IEC 60664-1 6 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40/125/21
Upper temperature IEC 60512-11-9 +125°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥500 mating cycles
Materials
Insert PC
Colour insert grey
Contacts Cu-alloy
Contact plating Ag (silver) /Au (gold)
Derating Curves
In preparation
159
heavy
|
mate® Q Contact inserts 5 + PE | 400 V +
crimp contacts
Housings from page 162
Description Part Number Drawing Figure
Contact insert 5 +PE (Please order contacts separately)
Male insert C146 10A005 500 12
Female insert C146 10B005 500 12
Coding element
Coding element N17 045 000 1
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 2.5 mm crimp contacts single contact
silver plating 0.5 mm² 20 100 VN01 025 0035 1C VN02 025 0035 1C
0.75 – 1.0 mm² 18 100 VN01 025 0036 1C VN02 025 0036 1C
1.5 mm² 16 100 VN01 025 0037 1C VN02 025 0037 1C
2.5 mm² 14 100 VN01 025 0038 1C VN02 025 0038 1C
4.0 mm² 12 100 VN01 025 0039 1C VN02 025 0039 1C
gold plating 0.5 mm² 20 100 VN01 025 0035 2C VN02 025 0035 2C
0.75 – 1.0 mm² 18 100 VN01 025 0036 2C VN02 025 0036 2C
1.5 mm² 16 100 VN01 025 0037 2C VN02 025 0037 2C
2.5 mm² 14 100 VN01 025 0038 2C VN02 025 0038 2C
4.0 mm² 12 100 VN01 025 0039 2C VN02 025 0039 2C
Contact arrangement
Male insert Female insert
160
heavy
|
mate® Q Characteristics contact inserts 7 + PE
General Characteristics Standard Value
Number of contacts 7 + PE
Termination technique crimp
Wire gauge 0.14 – 2.5mm² (AWG 26-14)
Flammability UL94 V-0
Electrical Characteristics
Rated voltage IEC 60664-1 400V
Pollution degree IEC 60664-1 3
Installation (overvoltage) category IEC 60664-1 3
Material group IEC 60664-1 3b
Rated impulse withstand voltage IEC 60664-1 6.0 kV
Current carrying capacity IEC 60512-5-2 see derating curves
Contact resistance IEC 60512-2-1 ≤ 5 mΩ
Insulation resistance IEC 60512-3-1 ≥ 1010 Ω
Climatical Characteristics
Climatic category IEC 60068-1 40/125/21
Upper temperature IEC 60512-11-9 +125°C
Lower temperature IEC 60512-11-10 -40°C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥500 mating cycles
Materials
Insert PC
Colour insert grey
Contacts Cu-alloy
Contact plating Ag (silver) /Au (gold)
Derating Curves
In preparation
161
Description Part Number Drawing Figure
Contact insert 7 +PE (Please order contacts separately)
Male insert C146 10A007 500 12
Female insert C146 10B007 500 12
Coding element
Male insert N17 059 000 1
Female insert N17 059 000 2
heavy
|
mate® Q Contact inserts 7 + PE | 400 V +
crimp contacts
Housings from page 162
Supplied as for wire gauge AWG Pieces Part Number Figure
Male contact Female contact
Turned 1.6 mm crimp contacts single contact
silver plating 0.14 - 0.37 mm² 26-22 100 VN01 016 0024 1C VN02 016 0024 1C
0.5 mm² 20 100 VN01 016 0025 1C VN02 016 0025 1C
0.75 – 1.0 mm² 20-16 100 VN01 016 0026 1C VN02 016 0026 1C
1.5 mm² 16-15 100 VN01 016 0027 1C VN02 016 0027 1C
2.5 mm² 14 100 VN01 016 0028 1C VN02 016 0028 1C
gold plating 0.14 - 0.37 mm² 26-22 100 VN01 016 0024 2C VN02 016 0024 2C
0.5 mm² 20 100 VN01 016 0025 2C VN02 016 0025 2C
0.75 – 1.0 mm² 20-16 100 VN01 016 0026 2C VN02 016 0026 2C
1.5 mm² 16-15 100 VN01 016 0027 2C VN02 016 0027 2C
2.5 mm² 14 100 VN01 016 0028 2C VN02 016 0028 2C
Contact arrangement
Male insert Female insert
162
Available Types
• Standard-Housings IP65
• Housings in IP67 and IP68
• EMC-Housings
• Corrosion resistant Housings
heavy
|
mate® Housings
163
heavy
|
mate® Housings standard Brief information
General information
• The connectors of our heavy
|
mate® series are designed for use
in machine tools, general electric installations and applications as
well as for industrial control and other electrical equipment.
Other applications than the above mentioned are in the
responsibility of the user.
• For cable to cable connections a suitable cable clamp has to be
used.
• The indicated dimensions with the panel cut-outs represent
reference values and are in the concrete application with products
to be co-ordinated.
• The sealing area of the housing has to be level and free of burrs.
• Housings in accordance with DIN EN 175 301 - 801 (DIN 43 652) .
164
heavy
|
mate® Housings standard Range of housings
Range of housings
Size A3/4 Size A10 Size A16
Size A32 Size E6 Size E10
Size E16 Size E24 Size E48
165
heavy
|
mate® Housings standard Characteristics
General Characteristics Standard Value
Protection class housing IP 65
Protection class spring cover
locked
spring loaded
IP 65
IP 54
Locking system DIN EN 175 301-801 (DIN 43 652) 1 locking lever
2 locking levers
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Temperature range IEC 60068-1 - 40 °C / + 125 °C
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Housings DIN EN 175 301-801 (DIN 43 652) Aluminium die cast alloy
Thermoplastic housing PA
Metal housing D 7 Zinc die cast alloy
Protective cover PA
Rubber gasket NBR
Locking lever steel / zinc coated
Surface EMV housings special surface
166
heavy
|
mate® Housings standard Housings thermoplastic Size A3/4
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
20 C146 10R003 600 4
Hood
side entry
20 C146 10R003 500 4
Housings
Housing
bulkhead mounting
with gasket
-
-
C146 10F003 000 4
Housing
bulkhead end mounting
with gasket
- C146 10F003 004 4
Housing
single side entry
with gland bushing
20 C146 10N003 500 4
Hood
cable to cable coupling
20 C146 10R003 804 4
Protective cover (only in connection with male insert)
Cover for housings - C146 10Z003 100 4
167
heavy
|
mate® Housings standard Housings metal Size A3/4
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
20 C146 30R003 600 4
Hood
side entry
20 C146 30R003 500 4
Housings
Housing
bulkhead mounting
with gasket
- C146 30F003 000 4
Housing
bulkhead end mounting
with gasket
- C146 30F003 004 4
Housing
single side entry
with gland bushing
20 C146 30N003 500 4
Hood
cable to cable coupling
20 C146 30R003 804 4
Protective cover (only in connection with male insert)
Cover for housings - C146 30Z003 100 4
168
heavy
|
mate® Housings standard Size 10
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
20
25
C146 21R010 650 4
C146 21R010 600 4
Hood
top entry
high profile
20
25
C146 21R015 650 2
C146 21R015 600 2
Hood
side entry
low profile
20
25
C146 21R010 550 4
C146 21R010 500 4
Hood
side entry
high profile
20
25
C146 21R015 550 2
C146 21R015 500 2
Housings h
Hood
coupling application
low profile
20
25
C146 21R010 854 4
C146 21R010 804 4
47.5
47.5
Hood
coupling application
high profile
20
25
C146 21R015 854 2
C146 21R015 804 2
59
59
Housing
bulkhead mounting
with gasket
- C146 10F015 000 2
Housing
bulkhead mounting
with spring cover
with gasket
- C146 10F015 003 2
169
heavy
|
mate® Housings standard Size A10
Description M Part Number Drawing Figure
Housings
Housing
single side entry
25 C146 10N015 500 2
1 closed if single entry
Housing
double side entry
25 C146 10N015 600 2
Housing
with spring cover
single side entry
25 C146 10N015 806 2
1 closed if single entry
Housing
with spring cover
double side entry
20
25
C146 10N015 607 2
C146 10N015 606 2
Protective cover
Cover for housings - C146 10Z015 100 2
Panel cut out
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
170
heavy
|
mate® Housings standard Size A16
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
20
25
C146 21R016 650 4
C146 21R016 600 4
Hood
top entry
high profile
20
25
C146 21R025 650 2
C146 21R025 600 2
Hood
side entry
low profile
20
25
C146 21R016 550 4
C146 21R016 500 4
Hood
side entry
high profile
20
25
C146 21R025 550 2
C146 21R025 500 2
Housings h
Hood
coupling application
low profile
20
25
C146 21R016 854 4
C146 21R016 804 4
52.5
65
Hood
coupling application
high profile
20
25
C146 21R025 854 2
C146 21R025 804 2
52.5
65
Housing
bulkhead mounting
with gasket
- C146 10F025 000 2
Housing
bulkhead mounting
with spring cover
with gasket
- C146 10F025 003 2
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
171
heavy
|
mate® Housings standard Size A16
Description M Part Number Drawing Figure
Housings
Housing
single side entry
25 C146 10N025 500 2
1 closed if single entry
Housing
double side entry
20
25
C146 10N025 601 2
C146 10N025 600 2
Housing
with spring cover
single side entry
25 C146 10N025 806 2
1 closed if single entry
Housing
with spring cover
double side entry
20
25
C146 10N025 607 2
C146 10N025 606 2
Protective cover
Cover for housings - C146 10Z025 100 2
Panel cut out
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
172
heavy
|
mate® Housings standard Size A32
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
25
32
C146 21R032 650 4
C146 21R032 600 4
Hood
side entry
25
32
C146 21R032 550 4
C146 21R032 500 4
Hood
coupling application
25
32
C146 21R032 852 4
C146 21R032 802 4
Hood
top entry
25
32
C146 21R032 652 4
C146 21R032 602 4
Hood
side entry
25
32
C146 21R032 552 4
C146 21R032 502 4
S
82
49,6
H
70,8
66
56
M
M
H
56
66
70,8 S
82
49,6
M
M
H
56
66
70,8 S
82
49,6
M
M
173
heavy
|
mate® Housings standard Size A32
Description M Part Number Drawing Figure
Housings
Housing
bulkhead mounting
with gasket
- C146 10F032 000 4
Housing
single side entry
25
32
C146 10N032 550 4
C146 10N032 500 4
Housing
double side entry
25
32
C146 10N032 650 4
C146 10N032 600 4
Panel cut out
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
174
heavy
|
mate® Housings standard Size E6 for 1 locking-lever-system
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
16
20
C146 21R006 656 1
C146 21R006 606 1
Hood
top entry
high profile
25
32
C146 21R006 656 8
C146 21R006 606 8
Hood
side entry
low profile
20
25
C146 21R006 506 1
C146 21R006 507 1
Hood
side entry
high profile
25
32
C146 21R006 556 8
C146 21R006 506 8
Housings h
Hood
coupling application
low profile
20 C146 21R006 804 1 52
Hood
coupling application
high profile
25 C146 21R006 854 8 70
Housing
bulkhead mounting
with gasket
- C146 10F006 000 1
Housing
bulkhead mounting
with thermoplastic
spring cover
with gasket
- C146 10F006 003 1
Housing
bulkhead mounting
with metal spring cover
with gasket
- C146 30F006 003 1
175
Description M Part Number Drawing Figure
Housings
Housing
single side entry
low profile
20 C146 10N006 803 1
Housing
single side entry
high profile
32 C146 10N006 802 2
1 closed if single entry
Housing
double side entry
low profile
20 C146 10N006 603 1
Housing
double side entry
high profile
25
32
C146 10N006 603 2
C146 10N006 602 2
Housing
with spring cover
single side entry
low profile
20
25
C146 10N006 807 1
C146 10N006 806 1
Housing
with spring cover
single side entry
high profile
25
32
C146 10N006 807 2
C146 10N006 806 2
1 closed if single entry
Housing
with spring cover
double side entry
low profile
20 C146 10N006 607 1
Housing
with spring cover
double side entry
high profile
25
32
C146 10N006 607 2
C146 10N006 606 2
Protective cover
Cover for housings - C146 10Z006 100 1
Cover for hoods - C146 10Z006 200 1
Panel cut out
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
heavy
|
mate® Housings standard Size E6 for 1 locking-lever-system
176 Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
20
25
C146 21R010 650 1
C146 21R010 600 1
Hood
top entry
high profile
25
32
C146 21R010 650 8
C146 21R010 600 8
Hood
side entry
low profile
20
25
C146 21R010 550 1
C146 21R010 500 1
Hood
side entry
high profile
25
32
C146 21R010 550 8
C146 21R010 500 8
Housings h
Hood
coupling application
low profile
20
25
C146 21R010 852 1
C146 21R010 802 1
51
51
51
Hood
coupling application
high profile
25
32
C146 21R010 852 8
C146 21R010 802 8
70
70
70
Housing
bulkhead mounting
with gasket
- C146 10F010 000 1
Right-angled housing
with gasket
- C146 10F010 090 1
heavy
|
mate® Housings standard Size E10 for 2 locking-lever-system
177
Description M Part Number Drawing Drawing
Housings h
Housing
single side entry
low profile
20
25
C146 10N010 501 1
C146 10N010 500 1
57
57
Housing
single side entry
high profile
25
32
C146 10N010 501 2
C146 10N010 500 2
74
74
Screw plug for one cable entry
Housing
double side entry
low profile
20 C146 10N010 601 1
57
Housing
double side entry
high profile
25
32
C146 10N010 601 2
C146 10N010 600 2
74
74
Panel cut out
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
heavy
|
mate® Housings standard Size E10 for 2 locking-lever-system
178 Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
20
25
32
C146 21R010 656 1
C146 21R010 606 1
C146 21R010 607 1
Hood
top entry
high profile
25
32
40
C146 21R010 656 8
C146 21R010 606 8
C146 21R010 607 8
Hood
side entry
low profile
20
25
C146 21R010 556 1
C146 21R010 506 1
Hood
side entry
high profile
25
32
C146 21R010 556 8
C146 21R010 506 8
Housings h
Hood
coupling application
low profile
20
25
32
C146 21R010 854 1
C146 21R010 804 1
C146 21R010 805 1
51
51
51
Hood
coupling application
high profile
25
32
40
C146 21R010 854 8
C146 21R010 804 8
C146 21R010 805 8
70
70
70
Housing
bulkhead mounting
with gasket
- C146 10F010 001 1
Housing
bulkhead mounting
with thermoplastic
spring cover
with gasket
- C146 10F010 003 1
Housing
bulkhead mounting
with metal spring cover
with gasket
- C146 30F010 003 1
heavy
|
mate® Housings standard Size E10 for 1 locking-lever-system
179
heavy
|
mate® Housings standard
Description M Part Number Drawing Figure
Housings h
Housing
single side entry
low profile
20 C146 10N010 803 1
57
Housing
single side entry
high profile
25
32
C146 10N010 803 2
C146 10N010 802 2
74
74
1 closed if single entry
Housing
double side entry
low profile
20 C146 10N010 603 1
57
Housing
double side entry
high profile
25 C146 10N010 603 2 74
Housing
with spring cover
single side entry
low profile
20 C146 10N010 807 1
57
Housing
with spring cover
single side entry
high profile
25
32
C146 10N010 807 2
C146 10N010 806 2
74
74
1 closed if single entry
Housing
with spring cover
double side entry
low profile
20 C146 10N010 607 1
57
Housing
with spring cover
double side entry
high profile
25
32
C146 10N010 607 2
C146 10N010 606 2
74
74
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
heavy
|
mate® Housings standard Size E10 for 1 locking-lever-system
180 Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
20 C146 21R010 652 1
Hood
top entry
high profile
25
32
C146 21R010 652 8
C146 21R010 602 8
Hood
side entry
low profile
20 C146 21R010 552 1
Hood
side entry
high profile
25
32
C146 21R010 552 8
C146 21R010 502 8
Housings
Housing
with spring cover
with gasket
- C146 10F010 002 1
heavy
|
mate® Hoods standard Size E10 with 2 locking-levers
181
Description M Part Number Drawing Figure
Housings h
Housing
single side entry
low profile
20 C146 10N010 509 1 57
Housing
single side entry
high profile
32 C146 10N010 508 2 74
1 closed if single entry
Housing
double side entry
low profile
20 C146 10N010 609 1 57
Housing
double side entry
high profile
25 C146 10N010 609 2 74
Housing
with spring cover
single side entry
low profile
20 C146 10N010 805 1 57
Housing
with spring cover
single side entry
high profile
32 C146 10N010 804 2 74
1 closed if single entry
Housing
with spring cover
double side entry
low profile
20 C146 10N010 605 1
57
Housing
with spring cover
double side entry
high profile
32 C146 10N010 604 2 74
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
heavy
|
mate® Hoods standard Size E10 with 2 locking-levers
182 Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
2 top entry
high profile
25 C146 10R010 902 8
Protective cover (only in connection with male insert)
Cover for housings - C146 10Z010 100 1
Cover for hoods - C146 10Z010 200 1
Further special housings on request.
heavy
|
mate® Special housings Size E10 for 2 locking-lever-system
183
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
25
32
C146 21R016 650 1
C146 21R016 600 1
Hood
top entry
high profile
32
40
C146 21R016 600 8
C146 21R016 601 8
Hood
side entry
low profile
25
32
C146 21R016 550 1
C146 21R016 500 1
Hood
side entry
high profile
32
40
C146 21R016 500 8
C146 21R016 501 8
Housings h
Hood
coupling application
low profile
25
32
C146 21R016 852 1
C146 21R016 802 1
62
62
Hood
coupling application
high profile
32
40
C146 21R016 802 8
C146 21R016 803 8
76
76
Housing
bulkhead mounting
with gasket
- C146 10F016 000 1
Housing
single side entry
low profile
25 C146 10N016 500 1 64
Housing
single side entry
high profile
32 C146 10N016 500 2 77
1 closed if single entry
Housing
double side entry
low profile
25 C146 10N016 600 1 64
Housing
double side entry
high profile
25
32
C146 10N016 601 2
C146 10N016 600 2
77
77
Panel cut out
heavy
|
mate® Housings standard Size E16 for 2 locking-lever-system
184 Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
25
32
C146 21R016 656 1
C146 21R016 606 1
Hood
top entry
high profile
32
40
C146 21R016 606 8
C146 21R016 607 8
Hood
side entry
low profile
25
32
C146 21R016 556 1
C146 21R016 506 1
Hood
side entry
high profile
32
40
C146 21R016 506 8
C146 21R016 507 8
Housings h
Hood
coupling application
low profile
25
32
C146 21R016 854 1
C146 21R016 804 1
62
62
Hood
coupling application
high profile
32
40
C146 21R016 804 8
C146 21R016 805 8
76
76
Housing
bulkhead mounting
with gasket
- C146 10F016 001 1
Housing
bulkhead mounting
with thermoplastic
spring cover
with gasket
- C146 10F016 003 1
Housing
bulkhead mounting
with metal spring cover
with gasket
- C146 30F016 003 1
heavy
|
mate® Housings standard Size E16 for 1 locking-lever-system
185
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Housings h
Housing
single side entry
low profile
25 C146 10N016 802 1 64
Housing
single side entry
high profile
32 C146 10N016 802 2 77
1 closed if single entry
Housing
double side entry
low profile
25 C146 10N016 602 1 64
Housing
double side entry
high profile
25
32
C146 10N016 603 2
C146 10N016 602 2
77
77
Housing
with spring cover
single side entry
low profile
25 C146 10N016 806 1 64
Housing
with spring cover
single side entry
high profile
32 C146 10N016 806 2 77
1 closed if single entry
Housing
with spring cover
double side entry
low profile
25 C146 10N016 606 1 64
Housing
with spring cover
double side entry
high profile
25
32
C146 10N016 607 2
C146 10N016 606 2
77
77
heavy
|
mate® Housings standard Size E16 for 1 locking-lever-system
186 Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
25
32
C146 21R016 652 1
C146 21R016 602 1
Hood
top entry
high profile
32
40
C146 21R016 602 8
C146 21R016 603 8
Hood
side entry
low profile
25
32
C146 21R016 552 1
C146 21R016 502 1
Hood
side entry
high profile
32
40
C146 21R016 502 8
C146 21R016 503 8
Housings
Housing
bulkhead mounting
with spring cover
with gasket
- C146 10F016 002 1
heavy
|
mate® Hoods standard Size E16 with 2 locking-levers
187
Description M Part Number Drawing Figure
Housings h
Housing
single side entry
low profile
25 C146 10N016 508 1 64
Housing
single side entry
high profile
32 C146 10N016 508 2 77
1 closed if single entry
Housing
double side entry
low profile
25 C146 10N016 608 1 64
Housing
double side entry
high profile
32 C146 10N016 608 2 77
Housing
with spring cover
single side entry
low profile
25 C146 10N016 804 1 64
Housing
with spring cover
single side entry
high profile
32 C146 10N016 804 2 77
1 closed if single entry
Housing
with spring cover
double side entry
low profile
25 C146 10N016 604 1 64
Housing
with spring cover
double side entry
high profile
32 C146 10N016 604 2 77
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
heavy
|
mate® Hoods standard Size E16 with 2 locking-levers
188 Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
2 top entry
high profile
25
32
C146 10R016 910 8
C146 10R016 902 8
Protective cover (only in connection with male insert)
Cover for housings - C146 10Z016 200 1
Cover for hoods - C146 10Z016 100 1
Further special housings on request.
heavy
|
mate® Special housings Size E16 for 2 locking-lever-system
189
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
25
32
C146 21R024 650 1
C146 21R024 600 1
Hood
top entry
high profile
32
40
C146 21R024 600 8
C146 21R024 601 8
Hood
side entry
low profile
25
32
C146 21R024 550 1
C146 21R024 500 1
Hood
side entry
high profile
32
40
C146 21R024 500 8
C146 21R024 501 8
Housings h
Hood
coupling application
low profile
25
32
C146 21R024 852 1
C146 21R024 802 1
62
62
Hood
coupling application
high profile
32
40
C146 21R024 802 8
C146 21R024 803 8
76
76
Housing
bulkhead mounting
with gasket
- C146 10F024 000 1
Housing
single side entry
low profile
25 C146 10N024 500 1 64
Housing
single side entry
high profile
32 C146 10N024 500 2 80
1 closed if single entry
Housing
double side entry
low profile
25 C146 10N024 600 1 64
Housing
double side entry
high profile
25
32
C146 10N024 601 2
C146 10N024 600 2
80
80
Panel cut out
heavy
|
mate® Housings standard Size E24 for 2 locking-lever-system
190 Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
25
32
C146 21R024 656 1
C146 21R024 606 1
Hood
top entry
high profile
32
40
C146 21R024 606 8
C146 21R024 607 8
Hood
side entry
low profile
25
32
C146 21R024 556 1
C146 21R024 506 1
Hood
side entry
high profile
32
40
C146 21R024 506 8
C146 21R024 507 8
Housings h
Hood
coupling application
low profile
25
32
C146 21R024 854 1
C146 21R024 804 1
62
62
Hood
coupling application
high profile
32
40
C146 21R024 804 8
C146 21R024 805 8
76
76
Housing
bulkhead mounting
with gasket
- C146 10F024 001 1
Housing
bulkhead mounting
with thermoplastic
spring cover
with gasket
- C146 10F024 003 1
Housing
bulkhead mounting
with metal spring cover
with gasket
- C146 30F024 003 1
heavy
|
mate® Housings standard Size E24 for 1 locking-lever-system
191
Description M Part Number Drawing Figure
Hoods h
Housing
single side entry
low profile
25 C146 10N024 802 1 64
Housing
single side entry
high profile
32 C146 10N024 802 2 80
1 closed if single entry
Housing
double side entry
low profile
25 C146 10N024 602 1 64
Housing
double side entry
high profile
32 C146 10N024 602 2 80
Housing
with spring cover
single side entry
low profile
25 C146 10N024 806 1 64
Housing
with spring cover
single side entry
high profile
32 C146 10N024 806 2 80
1 closed if single entry
Housing
with spring cover
double side entry
low profile
25 C146 10N024 606 1 64
Housing
with spring cover
double side entry
high profile
25
32
C146 10N024 607 2
C146 10N024 606 2
80
80
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
heavy
|
mate® Housings standard Size E24 for 1 locking-lever-system
192 Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
25
32
C146 21R024 652 1
C146 21R024 602 1
Hood
top entry
high profile
32
40
C146 21R024 602 8
C146 21R024 603 8
Hood
side entry
low profile
25
32
C146 21R024 552 1
C146 21R024 502 1
Hood
side entry
high profile
32
40
C146 21R024 502 8
C146 21R024 503 8
Housings
Housing
bulkhead mounting
with spring cover
with gasket
- C146 10F024 002 1
heavy
|
mate® Hoods standard Size E24 with 2 locking-levers
193
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Housings h
Housing
single side entry
low profile
25 C146 10N024 508 1 64
Housing
single side entry
high profile
32 C146 10N024 508 2 80
1 closed if single entry
Housing
double side entry
low profile
25 C146 10N024 608 1 64
Housing
double side entry
high profile
32 C146 10N024 608 2 80
Housing
with spring cover
single side entry
low profile
25 C146 10N024 804 1 64
Housing
with spring cover
single side entry
high profile
32 C146 10N024 804 2 80
1 closed if single entry
Housing
with spring cover
double side entry
low profile
25
25
C146 10N024 604 1
C146 10N024 808 1 (2
64
64
Housing
with spring cover
double side entry
high profile
25
32
C146 10N024 605 2
C146 10N024 604 2
80
80
heavy
|
mate® Hoods standard Size E24 with 2 locking-levers
194 Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
2 top entry
high profile
32
40
C146 10R024 903 8
C146 10R024 908 8
Protective cover (only in connection with male insert)
Cover for housings - C146 10Z024 200 1
Cover for hoods - C146 10Z024 100 1
Further special housings on request.
heavy
|
mate® Special housings Size E24 for 2 locking-lever-system
195
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
40
50
C146 21R048 607 1
C146 21R048 608 1
Hood
top entry
high profile
Hood
side entry
low profile
40
50
C146 21R048 507 1
C146 21R048 508 1
Hood
side entry
high profile
heavy
|
mate® Housings standard Size E48 for 1 locking-lever-system
196
Description M Part Number Drawing Figure
Hoods
Housing
bulkhead mounting
with gasket
-C146 10F048 001 1
Housing
bulkhead mounting
with spring cover
with gasket
-C146 10F048 003 1
Housing
single side entry
40 C146 10N048 803 1
Housing
with spring cover
40 C146 10N048 807 1
Panel cut out
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
heavy
|
mate® Housings standard Size E48 for 1 locking-lever-system
197
Gland bushings for hoods- und housings see page 224-225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
25
32
C146 10R024 650 3
C146 10R024 600 3
Hood
side entry
low profile
25
32
C146 10R024 550 3
C146 10R024 500 3
Housings
Hood
coupling application
low profile
25
32
C146 10R024 852 3
C146 10R024 802 3
Housing
bulkhead mounting
with gasket
- C146 10F024 000 3
Housing
single side entry
low profile
25 C146 10N024 500 3
1 closed if single entry
Housing
double side entry
low profile
25 C146 10N024 600 3
Panel cut out
heavy
|
mate® Housings standard HvE 16 Size E16 for 2 locking-lever-system
198
199
heavy
|
mate® Housings IP 67 Characteristics
General Characteristics Standard Value
Protection class housing IP 67
Locking system 2 locking levers
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Temperature range IEC 60068-1 - 40 °C / + 125 °C
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Housings Aluminium die cast alloy
Colour housings grey
Rubber gasket CR
Locking lever steel / zinc coated
Surface powder coating
200
heavy
|
mate® Housings IP 67 Size E6
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
25 C146 67R006 607 1
Hood
side entry
25 C146 67R006 507 1
Housings L1 L2
Housing
bulkhead mounting
C146 67F006 000 8 70 80
Panel cut out
Version A + B
Ø 4.5 od. M4
48
70
35.0
32.0
48
32
30,3
201
heavy
|
mate® Housings IP 67 Size E10
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
25 C146 67R010 600 1
Hood
side entry
25 C146 67R010 500 1
Housings L1 L2
Housing
bulkhead mounting
C146 67F010 000 8 83 93
Panel cut out
Version A + B
Ø 4.5 od. M4
60
83
35.0
32.0
48
32
30,3
202
heavy
|
mate® Housings IP 67 Size E16
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
32 C146 67R016 600 8
Hood
side entry
32 C146 67R016 500 8
Housings L1 L2
Housing
bulkhead mounting
C146 67F016 000 8
103 113
Panel cut out
48
32
30,3
Version A + B
Ø 4.5 od. M4
82
103
35.0
32.0
203
heavy
|
mate® Housings IP 67 Size E24
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
40 C146 67R024 601 8
Hood
side entry
40 C146 67R024 501 8
Housings L1 L2
Housing
bulkhead mounting
C146 67F024 000 8 130 140
Panel cut out
48
32
30,3
Version A + B
Ø 4.5 od. M4
108
130
35.0
32.0
204
205
heavy
|
mate® Housings IP 68 Characteristics
General Characteristics Standard Value
Protection class housing IP 68 / IP69K
Locking system screw M6
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Temperature range IEC 60068-1 - 40 °C / + 125 °C
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Housings Aluminium die cast alloy
Colour housings black, RAL 9005
Rubber gasket NBR
Locking lever stainless steel
Surface powder coating
206
heavy
|
mate® Housings IP 68 Size 6
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
32 C146 68R006 600 8
Hood
side entry
32 C146 68R006 500 8
Housings
Housing
bulkhead mounting
C146 68F006 001 1
Housing 32 C146 68N006 500 2
Panel cut out
207
heavy
|
mate® Housings IP 68 Size 10
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
32 C146 68R010 600 8
Hood
side entry
32 C146 68R010 500 8
Housings
Housing
bulkhead mounting
C146 68F010 001 1
Housing 32 C146 68N010 500 2
Panel cut out
208
heavy
|
mate® Housings IP 68 Size 16
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
40 C146 68R016 601 8
Hood
side entry
40 C146 68R016 501 8
Housings
Housing
bulkhead mounting
C146 68F016 001 1
Housing 32 C146 68N016 501 2
Panel cut out
209
heavy
|
mate® Housings IP 68 Size 24
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
40 C146 68R024 601 8
Hood
side entry
40 C146 68R024 501 8
Housings
Housing
bulkhead mounting
C146 68F024 001 1
Housing 32 C146 68N024 501 2
Panel cut out
210
heavy
|
mate® Housings EMC General information
General information
• conductive surface
• standard locking levers
• same housing dimensions like standard housings
• two housing sizes
•with or without ground strap
•high attenuation
•protection class IP 65
•mating cycles > 500
Concept
Ground strap
Centering flange
Range of housings in two housing sizes
Version A
Standard flange without ground strap
Version B
Standard flange with ground strap
Version C
Centering flange with ground strap
211
heavy
|
mate® Housings EMC Characteristics
General Characteristics Standard Value
Protection class housing IP 65
Locking system 2 locking levers
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Temperature range IEC 60068-1 - 40 °C / + 125 °C
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Housings Aluminium die cast alloy
Colour housings grey, RAL 9005
Rubber gasket EPDM
Locking lever steel / zinc coated
Surface conducting special surface
212
heavy
|
mate® Housings EMC Size E6 for 1 locking-lever-system
EMC gland bushings for hoods see page 225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
20
25
C146 11R006 606 1
C146 11R006 607 1
Hood
top entry
high profile
25
32
C146 11R006 656 8
C146 11R006 606 8
Hood
side entry
low profile
16
20
25
C146 11R006 556 1
C146 11R006 506 1
C146 11R006 507 1
Hood
side entry
high profile
25
32
C146 11R006 556 8
C146 11R006 506 8
Housings
Housing
bulkhead mounting
Version A
Standard flange
without ground strap
C146 11F006 901 8
Housing
bulkhead mounting
Version B
Standard flange
with ground strap
C146 11F006 902 8
Housing
bulkhead mounting
Version C
Centering flange
with ground strap
C146 11F006 001 8
Panel cut out
Version A + B
Ø 4.5 od. M4
48
70
35.0
Version C
39.0-0.20
R5.0+0.2
56
70
Ø 4.5 od. M4
32.0
32.0
51
70
51
70
213
heavy
|
mate® Housings EMC Size E10 for 2 locking-lever-system
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
20
25
32
C146 11R010 650 1
C146 11R010 600 1
C146 11R010 601 1
Hood
top entry
high profile
25
32
40
C146 11R010 650 8
C146 11R010 600 8
C146 11R010 601 8
Hood
side entry
low profile
20
25
C146 11R010 550 1
C146 11R010 500 1
Hood
side entry
high profile
25
32
C146 11R010 550 8
C146 11R010 500 8
Housings
Housing
bulkhead mounting
Version A
Standard flange
without ground strap
C146 11F010 901 8
Housing
bulkhead mounting
Version B
Standard flange
with ground strap
C146 11F010 902 8
Housing
bulkhead mounting
Version C
Centering flange
with ground strap
C146 11F010 000 8
Panel cut out
EMC gland bushings for hoods see page 225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Version A + B
Ø 4.5 od. M4
60
83
35.0
Version C
39.0-0.20
R5.0+0.2
69
83
Ø 4.5 od. M4
32.0
32.0
51
70
51
70
214 EMC gland bushings for hoods see page 225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
25
32
C146 11R016 650 1
C146 11R016 600 1
Hood
top entry
high profile
25
32
40
C146 11R016 650 8
C146 11R016 600 8
C146 11R016 601 8
Hood
side entry
low profile
25
32
C146 11R016 500 1
Hood
side entry
high profile
25
32
40
C146 11R016 550 8
C146 11R016 500 8
C146 11R016 501 8
Housings
Housing
bulkhead mounting
Version A
Standard flange
without ground strap
C146 11F016 901 8
Housing
bulkhead mounting
Version B
Standard flange
with ground strap
C146 11F016 902 8
Housing
bulkhead mounting
Version C
Centering flange
with ground strap
C146 11F016 000 8
Panel cut out
Version A + B
Ø 4.5 od. M4
82
103
35.0
Version C
39.0-0.20
R5.0+0.2
89.5
103
Ø 4.5 od. M4
32.0
32.0
33,3
48
32 103
113
30,3
48
32 103
113
30,3
48
32 103
113
43
43
93.5
62
76
93.5
62
76
heavy
|
mate® Housings EMC Size E16 for 2 locking-lever-system
215
Description M Part Number Drawing Figure
Hoods
Hood
top entry
low profile
25
32
C146 11R024 650 1
C146 11R024 600 1
Hood
top entry
high profile
25
32
40
C146 11R024 650 8
C146 11R024 600 8
C146 11R024 601 8
Hood
side entry
low profile
25
32
C146 11R024 550 1
C146 11R024 500 1
Hood
side entry
high profile
25
32
40
C146 11R024 550 8
C146 11R024 500 8
C146 11R024 501 8
Housings
Housing
bulkhead mounting
Version A
Standard flange
without ground strap
C146 11F024 901 8
Housing
bulkhead mounting
Version B
Standard flange
with ground strap
C146 11F024 902 8
Housing
bulkhead mounting
Version C
Centering flange
with ground strap
C146 11F024 000 8
Panel cut out
EMC gland bushings for hoods see page 225.
Further variants and variants with PG thread on www.amphenol.de or on request.
Version A + B
Ø 4.5 od. M4
108
130
35.0
Version C
39.0-0.20
R5.0+0.2
116
130
Ø 4.5 od. M4
32.0
32.0
62
76
62
76
heavy
|
mate® Housings EMC Size E24 for 2 locking-lever-system
216
217
heavy
|
mate® Housings corrosion resistant Characteristics + Notes
Wichtige Hinweise
500h salt mist resistance can be achieved when using a plastic
cable gland.
When a metal cable gland is required, we recommend to use
additionally our special studs on the hoods
to achieve this value.
Order codes are:
N16 025 0112 5X Metal stud M25 corrosion resistant
N16 032 0112 5X Metal stud M32 corrosion resistant
N16 040 0112 5X Metal stud M40 corrosion resistant
General Characteristics Standard Value
Protection class housing IP 65
Locking system 2 locking levers
Salt mist resistance IEC 60512-11-6:2002 >500h
Climatical Characteristics
Climatic category IEC 60068-1 40 / 125 / 21
Temperature range IEC 60068-1 - 40 °C / + 125 °C
Upper temperature IEC 60512-11-9 + 125 °C
Lower temperature IEC 60512-11-10 - 40 °C
Mechanical Characteristics
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Housings Aluminium die cast alloy
Colour housings grey, RAL 9005
Rubber gasket NBR
Locking lever steel / special coated
Surface conducting special surface
218
heavy
|
mate® Housings corrosion resistant Size E6
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
25 C146 50R006 607 1
Hood
side entry
25 C146 50R006 507 1
Housings
Housing
bulkhead mounting
C146 50F006 000 1
Panel cut out
219
heavy
|
mate® Housings corrosion resistant Size E10
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
25 C146 50R010 600 1
Hood
side entry
25 C146 50R010 500 1
Housings
Housing
bulkhead mounting
C146 50F010 000 1
Panel cut out
220
heavy
|
mate® Housings corrosion resistant Size E16
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
32 C146 50R016 600 8
Hood
side entry
32 C146 50R016 500 8
Housings
Housing
bulkhead mounting
C146 50F016 000 1
Panel cut out
221
heavy
|
mate® Housings corrosion resistant Size E24
Further variants and variants with PG thread on www.amphenol.de or on request.
Description M Part Number Drawing Figure
Hoods
Hood
top entry
40 C146 50R024 601 8
Hood
side entry
40 C146 50R024 501 8
Housings
Housing
bulkhead mounting
C146 50F024 000 1
Panel cut out
222
223
• gland bushings
• EMC gland bushings
• Cable seals with cable clamp
• Key pin
• Guide pin / bush
• D-Sub adaptors
• Foam rubber sealing
• Label for CSA regulation
heavy
|
mate® Accessories
224
heavy
|
mate® Accessories Assembly instructions + Gland bushings IP 65
Description M Part Number Drawing Figure
Gland bushing IP 651)
Thermoplast clamp
with variable
inner diameter
10 Pieces
20 VN16 200 0114 X
Metal
with variable
inner diameter
10 Pieces
20
25
32
40
50
VN16 200 0114 X
VN16 250 0114 X
VN16 320 0114 X
VN16 400 0114 X
VN16 500 0114 X
Cable clamp
without gasket
5 Pieces
16
20
25
32
VN16 160 0102 V
VN16 200 0102 V
VN16 250 0102 V
VN16 320 0102 V
Cable clamp
without gasket
5 Pieces
20
25
32
VN16 200 0103 V
VN16 250 0103 V
VN16 320 0103 V
1) Attention: not usable for hoods without stud
Assembly instructions for metric clamp
• The cable jacket should be removed as far as the underside of the
cable clamping; the wire netting is then to be cut down a little
further and subsequently must be formed into a circular rim. The
protective jacket can remain attached to the cable provided that
it passes through the lower opening of the clamp.
• On assembly, while screwing the cable clamp, the circular rim has
to be pushed through and pressed on the fins commutator on the
base of the underside and settle into a depression. By doing
this the EMC security will remain.
225
heavy
|
mate® Accessories Gland bushings IP 67 + IP 68
Description
Clamping
range
ø in mm
A in
mm
M Part Number Drawing Figure
Gland bushing IP 67 (Material PA / - 20 °C + 80 °C)
Gland bushing with
vibration protection
10 Pieces
4 - 10
6 - 12
9 - 16
10 - 21
16 - 28
20
24
28
36
46
16
20
25
32
40
VN16 160 0127 X
VN16 200 0127 X
VN16 250 0127 X
VN16 320 0127 X
VN16 400 0127 X
Plugs brass nickel-
plated with recess
and o-ring
10 Pieces
20
25
32
40
VN16 020 0113 (1) X
VN16 025 0113 (1) X
VN16 032 0113 (1) X
VN16 040 0113 (1) X
Description Clamping
range F in mm
M Part Number Drawing Figure
EMV gland bushing IP 68 (Material CuZn / PA / - 30 °C + 120 °C)
Gland bushing
EMV
10 Pieces
5.5 - 10
8 - 13
11 - 18
15 - 21
19 - 27
16
20
25
32
40
VN16 160 0126 X
VN16 200 0126 X
VN16 250 0126 X
VN16 320 0126 X
VN16 400 0126 X
226
heavy
|
mate® Accessories
Description L Part Number Drawing Figure
Key pin with lock washer
10 Pieces
VN17 050 0004 (1)
Key pin with lock washer
100 Pieces
VN17 050 0004 (101)
Guide pin
10 Pieces
VN13 040 0009 (1) X
Guide socket
10 Pieces
VN13 040 0008 (1) X
Locking screw for contact
inserts heavy
|
mate® D 15,
D 25, A 10, A 16
20 Pieces
23 VN03 030 0021
Locking screw for contact
inserts heavy
|
mate® D 40,
D 64, E, M, H
20 Pieces
20 VN03 030 0020
Locking set
10 Pieces
VN03 030 3000 X
M3
227
heavy
|
mate® Accessories Polarization system
Polarization system with key pin
For housings with one contact insert
For housings with two contact inserts
Descriptions
● Key pin
○ Locking screw
M Male insert
F Female insert
Polarization system with guide pin and guide socket
For housings with one contact insert
For housings with two contact inserts
Descriptions
● Guide pin
○ Guide socket
+ Locking screw
M Male insert
F Female insert
228
heavy
|
mate® Accessories
Description Size Part Number
a b D-Sub
Drawing Figure
Foam rubber
sealing 2 mm
6
10
16
24
N06 080 0003 1
N06 080 0003 2
N06 080 0003 3
N06 080 0003 4
80
93
113
140
70
83
103
130
Adaptor for D-Sub
set metal
15
25
C146 N32 015 G2
C146 N32 025 G2
57
57
49,5
49,5
15
25
2 x adaptor
4 x M3 x 6,5
8 x M3 x 14
Adaptor for D-Sub
set single-row
6
6
10
16
16
C146 N32 009 G1
C146 N32 015 G1
C146 N32 025 G1
C146 N32 037 G1
C146 N32 050 G1
51,5
51,5
64,5
85
85
44
44
57
77,5
77,5
9
15
25
37
50
2 x adaptor
4 x M3 x 6,5
8 x M3 x 14
Adaptor for D-Sub
set double-row
6
6
10
16
16
C146 N33 009 G1
C146 N33 015 G1
C146 N33 025 G1
C146 N33 037 G1
C146 N33 050 G1
51,5
51,5
64,5
85
85
44
44
57
77,5
77,5
9
15
25
37
50
2 x adaptor
4 x M3 x 6,5
8 x M3 x 14
Label for CSA
application
N07 045 0001 L
229
heavy
|
mate® Accessories Your notes
230
231
• Drawings contacts
• Safety classification
• Technical information
heavy
|
mate® Information
232
heavy
|
mate® Information Drawings stamped contacts
Series Drawing single contact Drawing contacts on reel Figure
heavy
|
mate® D, M .N01 016 0003 1 .N02 016 0003 1
.N01 016 0002 1 .N02 016 0002 1
.N01 016 0015 11) .N02 016 0015 11)
.N01 016 0005 1 .N02 016 0005 1
.N01 016 0016 11) .N02 016 0016 11)
heavy
|
mate® E, M .N01 025 0001 1 .N02 025 0001 1
.N01 025 0010 1 .N02 025 0010 1
.N01 025 0043 1 .N02 025 0043 1
heavy
|
mate® M.N01 010 0130 2 .N02 010 0130 2
.N01 010 0131 2 .N02 010 0131 2
1) marked with "H"
233
heavy
|
mate® Information Drawings turned contacts
Series Part Number
Wire gauge
AB
Drawing Figure
heavy
|
mate®
D, DD, M
100 Pieces
VN01 016 0024 (1)C
VN01 016 0025 (1)C
VN01 016 0026 (1)C
VN01 016 0027 (1)C
VN01 016 0028 (1)C
0,14 - 0,37
0,5
0,75 - 1,0
1,5
2,5
0,9
1,1
1,45
1,75
2,25
2,6
2,6
2,6
3,0
3,2
.N01 016 002X
VN02 016 0024 (1)C
VN02 016 0025 (1)C
VN02 016 0026 (1)C
VN02 016 0027 (1)C
VN02 016 0028 (1)C
0,14 - 0,37
0,5
0,75 - 1,0
1,5
2,5
0,9
1,1
1,45
1,75
2,25
2,6
2,6
2,6
3,0
3,2
.N02 016 002X
heavy
|
mate®
E, EE
100 Pieces
VN01 025 0035 (1)C
VN01 025 0036 (1)C
VN01 025 0037 (1)C
VN01 025 0038 (1)C
VN01 025 0039 (1)C
0,5
0,75 - 1,0
1,5
2,5
4,0
1,1
1,45
1,75
2,3
2,9
2,6
2,6
3,0
3,2
4,0
.N01 025 003X
VN02 025 0035 (1)C
VN02 025 0036 (1)C
VN02 025 0037 (1)C
VN02 025 0038 (1)C
VN02 025 0039 (1)C
0,5
0,75 - 1,0
1,5
2,5
4,0
1,1
1,45
1,75
2,3
2,9
2,6
2,6
3,0
3,2
4,0
.N02 025 003X
heavy
|
mate®
M
100 Pieces
VN01 025 0029 (1)C
VN01 025 0030 (1)C
VN01 025 0031 (1)C
VN01 025 0032 (1)C
VN01 025 0033 (1)C
0,5
0,75 - 1,0
1,5
2,5
4,0
1,1
1,45
1,75
2,25
2,85
2,6
2,6
3,0
3,45
3,9
.N01 025 00XX
VN02 025 0029 (1)C
VN02 025 0030 (1)C
VN02 025 0031 (1)C
VN02 025 0032 (1)C
VN02 025 0033 (1)C
0,5
0,75 - 1,0
1,5
2,5
4,0
1,1
1,45
1,75
2,25
2,85
2,6
2,6
3,0
3,45
3,9
.N02 025 00XX
VN01 036 0004 (1)C
VN01 036 0005 (1)C
VN01 036 0001 (1)C
VN01 036 0002 (1)C
VN01 036 0003 (1)C
1,5
2,5
4,0
6,0
10,0
1,75
2,25
2,85
3,55
4,4
3,0
3,45
3,9
4,9
5,9
.N01 036 000X
VN02 036 0004 (1)C
VN02 036 0005 (1)C
VN02 036 0001 (1)C
VN02 036 0002 (1)C
VN02 036 0003 (1)C
1,5
2,5
4,0
6,0
10,0
1,75
2,25
2,85
3,55
4,4
3,0
3,45
3,9
4,9
5,9
.N02 036 000X
234
heavy
|
mate® Information Drawings FO, coax contacts
Series Part Number Drawing single contact Figure
heavy
|
mate® M, FO N01 016 0040 8
N02 016 0040 8
heavy
|
mate® M, Coax 17 DM 537 421
17 DM 537 401
17 DM 537 425
17 DM 537 405
235
heavy
|
mate® Information Your notes
236 1) When used as connector with braking capacity the load shall be reduced
2) When using cable seals (from page 224)
heavy
|
mate® Informationen Classification according to DIN EN 61984 (VDE 0627)
If not otherwise stated the contact inserts have to be mounted in metallic conductive housings resp. on bars or mounting boards
to complete the protective earth grounding.
Style enclosed unenclosed earthing contact cable clamp finger safety mated
Hood with
pin insert •••
Pin insert
••
Hood with
socket insert •••
Socket insert
••
Coupling housing
with pin insert •••
Coupling housing
with socket insert •••
Housing with
pin insert •••
Housing with
socket insert •••
237
3) When using standard gland bushings
4) See detail information
heavy
|
mate® Informationen Classification according to DIN EN 61984 (VDE 0627)
finger safety hand back safety connetor with rewirable Cable clamp Style
unmated mated breaking capacity 1) with 2)
without 3)
•••••
Hood with
pin insert
••
4) •
Pin insert
••••••
Hood with
socket insert
••
4) •
Socket insert
••••
Coupling housing
with pin insert
••••••
Coupling housing
with socket insert
•••••
Housing with
pin insert
••••••
Housing with
socket insert
238
heavy
|
mate® Information Technical information
General technical information
• The Safty of connectors/connectors with braking capacity (CBC)
depends on the right selection of products, the correct installation
and a proper assembly.
• Decisions for the application of connectors are the requirements
of the equipment specifications. This is especially the case for
the definition of the rated voltage and the related clearances and
creepage distances.
• All rated data for the connectors listed in this catalogue is based
on overvoltage category III and pollution degree 3 (machine tool
application).
• All technical data is specified for connectors, which are not under
load when mated or disconnected. If in special cases connectors
can be used in the sense of plug and socket devices (connector
with breaking capacity), this is mentioned in the brief information of
the particular section.
• Correct mounting will protect against electrical shock when mating
the connectors.
• It connectors are mounted in non conductive housings both
protective earthing terminals shall be mounted.
• A detailed connector glossary can be found at the end of this
catalogue.
• All mentioned excerpts of standards are for general information
only. For specific cases the valid original standards have to be
consulted.
• Test methods acc. IEC 60512 camply with test methods acc.
DIN EN 60512 or DIN IEC 60512. IEC 60664-1 complies with DIN
VDE 0110-1
Termination methods: Screw connection
Screw clamps are designed acc. to EN 60999-1/VDE
0609. Chart 1 below shows the screw size depending
on wire size and the required clamping and testing
torque.
Chart 1
Wire size (mm2)1 1.5 2.5 4 6 10
Screw size M 2.6 M 3 M 3 M 3.5 M 4 M 4
Test torque (Ncm) 40 50 50 80 120 120
Diagram 1 below shows the range of tensile strength for a screw
connection with a clamp screw M3, fastened with a torque of 50
Ncm, depending on the wire size.
Diagram 1
Tensile strength
Wire gauge
239
heavy
|
mate® Information Technical information
Crimp connection Chart 2: Tensile strength for crimp connetions
A crimp connection is a non-detachable electrical connection
between a wire and a crimp contact produced with the crimp
technology. Precise crimping dies are matched to the crimp barrel
and the wire size and a defined deformation results in a reliable
electrical connection. There are open barrels (stamped contacts) and
closed crimp barrels (turned contacts).
The main advantages of crimp connections are:
• Efficient termination of contacts.
• Reproduceable electrical and mechanical figures by a constant
crimp quality.
(A detailed description of the crimp technology can be found in our
catalogue "tools").
The requirements for crimp connections are defined in DIN EN
60352-2.
An important point for the quality of a crimp connection is the
achieved tensile strength of the termination. Measuring the tensile
strength is a practible means for quality control purposes. Chart
2 below shows the required minimum tensile strength for open and
closed barrels according to the wire size.
Wire size Tensile strength
mm2AWG 1) N
0.05 30 6
0.08 28 11
0.12 26 15
0.14 18
0.22 24 28
0.25 32
0.32 22 40
0.5 20 60
0.75 85
0.82 18 90
1.0 108
1.3 16 135
1.5 150
2.1 14 200
2.5 230
3.3 12 275
4.0 310
5.3 10 355
6.0 360
8.4 8 370
10.0 380
Cross reference AWG - mm2
The chart below allows a cross reference between American Wire
Gauge (AWG) and metric wire sizes (mm2).
Chart 3
AWG
Wire composition
Leiter-Ø Wire size AWG
Wire composition
Leiter-Ø Wire size
30 1 x 0.25 0.25 mm 0.05 mm220 1 x 0.81 0.81 mm 0.52 mm2
7 x 0.10 0.36 mm 0.06 mm27 x 0.32 0.97 mm 0.56 mm2
28 1 x 0.32 0.32 mm 0.08 mm219 x 0.20 1.02 mm 0.62 mm2
7 x 0.13 0.38 mm 0.09 mm218 1 x 1.02 1.02 mm 0.79 mm2
26 1 x 0.40 0.40 mm 0.13 mm219 x 0.25 1.27 mm 0.96 mm2
7 x 0.16 0.48 mm 0.14 mm216 19 x 0.29 1.44 mm 1.23 mm2
19 x 0.10 0.51 mm 0.15 mm214 19 x 0.36 1.80 mm 1.95 mm2
24 1 x 0.51 0.51 mm 0.21 mm212 19 x 0.46 2.29 mm 3.09 mm2
7 x 0.20 0.61 mm 0.23 mm210 37 x 0.40 3.10 mm 4.60 mm2
19 x 0.13 0.64 mm 0.24 mm28 133 x 0.29 4.0 mm 8.80 mm2
22 1 x 0.64 0.64 mm 0.33 mm26 133 x 0.36 5.5 mm 13.5 mm2
7 x 0.25 0.76 mm 0.36 mm2
19 x 0.16 0.81 mm 0.38 mm2
It has to be noted that wires of the same AWG number but with
different composition have slightly different mm2.
1) Only for information
240
Chart 4: Composition and Dimensions of Copper Wires
Wire Size Wire Composition Wire diameter
0.09 mm212 x 0.10 0.48 mm
0.14 mm218 x 0.10 0.50 mm
0.25 mm214 x 0.15 0.70 mm
0.34 mm27 x 0.25 0.78 mm
0.5 mm216 x 0.20 1.0 mm
0.75 mm224 x 0.20 1.2 mm
1.0 mm232 x 0.20 1.4 mm
1.5 mm230 x 0.25 1.6 mm
2.5 mm235 x 0.30 2.2 mm
4.0 mm256 x 0.30 2.8 mm
6.0 mm219 x 0.64 3.4 mm
10 mm219 x 0.80 4.3 mm
Current carrying capacity
The current carrying capacity of a connector is shown by a derating
curve. The curve shows the currents that the connector can carry
continuously and simultaneously through all its contacts. The curve
is determined by testing following the standard DIN EN 60512. The
upper temperature is limited by the contact and insulation material
used . The sum of the ambient temperature and the temperature
created by the current flow may not exceed the upper temperature.
This means that the current carrying capacity has no fixed value but
decreases with increasing ambient temperatures.
As a general example it can be said that a given connector which can
carry 16A through all its contacts at 40°C ambient temperature can
carry less, e.g. 12A, at an ambient temperature of 80°C.
On the other hand it is often the case that not all contacts carry the
whole rated current, which means that some single contacts may
carry a higher current than that according to the derating curve.
These currents have to be defined by testing.
Diagram 3: Typical derating curve
Chart 5: Current carrying capacity of copper wires in (A)
Installation type Wire size (mm2) 0.25 0.34 0.5 0.75 1 1.5 2.5 4 6 10
B1 Wires in conduits and installation channels
- - - 7.6 10.4 13.5 18.3 25 32 44
B2 Cables and conductors in conduits or installation channels
- - - - 9.6 12 16.5 23 29 40
C Cables and conductors along walls
4.0 5.0 7.1 9.1 11.7 15.2 21 28 36 50
E Cables and conductors on plank
4.0 5.0 7.1 9.1 11.5 16.1 22 30 37 52
Description according to DIN EN 60204 for PVC insulated copper
wires with a working temperature of +40C. For other requirements,
such as for other temperatures, mountings, or wires corresponding
correction factors are used (see next page).
Current carrying capacity
Ambient temperature (°C)
Upper temperature limited
by the connector materials
heavy
|
mate® Information Technical information
241
Reduction values Chart 6
The values in chart 5 are based on an ambient temperature of 40 °C.
For other ambient temperatures the values have to be adjusted using
the correction values of chart 6 below.
For installations with many cables and conductors under load the
current carrying capacity is reduced according to the two following
charts 7 and 8.
Ambient temperature (°C) Correction value
30 1.15
35 1.03
40 1.00
45 0.91
50 0.82
55 0.71
60 0.58
Chart 7: Reduction values for accumulated conductors
Installation type
Number of cables and conductors / pairs under load
2469
Threephase cable and conductor
B1 and B2
C
E-one row
E-multi row
0.80
0.65
0.57
0.50
0.85
0.75
0.72
0.70
0.87
0.78
0.75
0.73
0.86
0.76
0.72
0.88
DC conductor (pair), independent of installation type 1.0 0.76 0.64 0.43
Chart 8: Reduction values for multicore cable and conductors up to 10mm2
Number of conductors (pairs) under load AC (conductor > 1 mm2) DC (Pairs 0,2 to 0,75 mm2)
5 0.75 0.52
7 0.65 0.45
10 0.55 0.39
24 0.40 0.27
Conductors of control circuits generally do not need a reduction.
Impulse current carrying capacity
A surge can happen to a connector and its contacts by an impulse
current, e.g. through a short circuit in the system or by
switching operations. The short-timed high current heat cannot be
transferred outside fast enough so the contacts are stressed by the
high temperature which in the worst case can lead to a local weld.
The robust design of our connectors prevents most damage by
impulse currents.
The diagram 4 below can be used as a guideline.
Chart 4: Impulse current carrying capacity of single contacts
Curve No. Connector style Curve No. Connector style
1
heavy
|
mate
®
E or A with screw contact 3
heavy
|
mate
®
S with stamped crimp contact
2
heavy
|
mate
®
E with stamped crimp contact 4
heavy
|
mate
®
D with stamped crimp contact
Impulse current (A)
Impulse time (S)
heavy
|
mate® Information Technical information
242
Voltage grading of connectors
General
Clearances and creepage distances are the base for voltage grading
of connectors. Valuation and dimensioning of clearances and
creepage distances have changed since the introduction of insulation
coordination.
Insulation coordination comprises the selection of the electrical
insulation performances of the equipment, taking into account the
expected use and its environment.
The following standards apply for this:
IEC 60664-1/10.92
Insulation coordination for equipment within
low-voltage systems
DIN VDE 0110-1/4.97
Isolationskoordination für elektrische Betriebsmittel
in Niederspannungsanlagen
Clearances
The clearance is the shortest distance in air between two conductive
parts. An important point for the dimensioning of clearances is
the determination of the overvoltage category. The above standard
specifies the possible overvoltages into the four following categories:
Overvoltage category I
Equipment intended for the use in appliances or parts of installations
in which no overvoltage can occur.
Examples are low-voltage equipments.
Overvoltage category II
Equipment intended for the use in installations or parts of it in which
lightning overvoltages do not need to be considered, but switching
overvoltages generated by the equipment do need to be considered.
Examples are household appliances.
Overvoltage category III
Equipment intended for the use in installtions or parts of it in which
lightning overvoltages do not need to be considered, however
switching overvoltages generated by the euipment, and for cases
where the reliability and the availability of the equipment or its
dependent circuits are subject to special requirements.
Examples are protecting means, switches and sockets.
Overvoltage category IV
Equipment intended for the use in installations or parts of it in which
lightning overvoltage has to be considered.
Examples are electricity meters, overcurrent protection switches.
Once the overvoltage category has been defined the rated impulse
withstand voltage can be selected for the equipment based on the
nominal voltage of the supply system and the overvoltage category
using chart 9 below:
Chart 9
Nominal voltage of the supply system in V
(based on IEC 60038)
Rated impulse voltage in kV for overvoltage category
Three phase systems IV III II I
230/400 277/480 6 4 2,5 1,5
400/690 8 6 4 2,5
1000 12 8 6 4
After the rated impulse withstand voltage has been selected the
pollution degree must be defined taking the expected pollution
around the equipment into account.
The following four degrees of pollution are established:
Pollution degree 1
No pollution or only dry, non-conductive pollution occurs. The
pollution has no influence.
Pollution degree 2
Only non-conductive pollution occurs except occasionally a temporary
conductivity caused by condensation is to be expected.
Pollution degree 3
Conductive pollution occurs or dry non-conductive pollution occurs
which becomes conductive due to condensation which is to be
expected.
Pollution degree 4
The pollution generates persistent conductivity caused by conductive
dust or by rain or snow.
It has to be noted that for a connector or plug and socket
devise with a degree of protection of min. IP 54 the parts
inside the enclosure may be dimensioned for a lower pollution degree.
This also applies to mated connectors which enclosure is ensured
through the connector housing and which may only be disengaged for
test and maintenance purposes.
When impulse withstand voltage and the pollution degree are defined
the minimum clearances can be selected from chart 10.
heavy
|
mate® Information Technical information
243
Chart 10
Impulse
withstand
voltage
in kV
Minimum clearances in air in mm up to 2000 m above sea level
Case A (non homogeneous field) Case B (homogeneous field)
Pollution degree Pollution degree
12341234
0.33 0.01 0.2 0.8 1.6 0.01 0.2 0.8 1.6
0.40 0.02 0.02
0.50 0.04 0.04
0.60 0.06 0.06
0.80 0.10 0.1
1.0 0.15 0.15
1.2 0.25 0.25 0.2
1.5 0.5 0.5 0.3 0.3
2.0 1.0 1.0 1.0 0.45 0.45
2.5 1.5 1.5 1.5 0.6 0.6
3.0 22220.80.8
4.0 33331.21,21.2
5.0 44441.51.51.5
6.0 5.5 5.5 5.5 5.5 2 2 2 2
8.0 88883333
10 11 11 11 11 3.5 3.5 3.5 3.5
12 14 14 14 14 4.5 4.5 4.5 4.5
15 18 18 18 18 5.5 5.5 5.5 5.5
20 25 25 25 25 8 8 8 8
25 33 33 33 33 10 10 10 10
30 40 40 40 40 12.5 12.5 12.5 12,5
40 60 60 60 60 17 17 17 17
50 75 75 75 75 22 22 22 22
60 90 90 90 90 27 27 27 27
80 130 130 130 130 35 35 35 35
100 170 170 170 170 45 45 45 45
When defining the minimum clearances for connectors generally the
values of the inhomogeneous field can be chosen or the required
clearance has to be defined by a voltage test.
Creepage distances
The creepage distance is the shortest distance along the surface of
the insulating material between two conductive parts.
For the dimensioning of the creepage distance the following factors
are taken into account: the rated voltage, the pollution degree and the
tracking formation of the insulating material.
The materials are separated into four groups according to their CTI
values (Comparative Tracking Index):
Material group I 600 ≤ CTI
Material group II 400 ≤ CTI < 600
Material group IIIa 175 ≤ CTI < 400
Material group IIIb 100 ≤ CTI < 175
The minimum creepage distances can be selected from chart 11 .
heavy
|
mate® Information Technical information
244
Chart 11
U-eff
Rated
vol-
tage
U in V
Min. creepage distance in mm
Printed
circuits
Other devices
Pollution
degree
Pollution degree Pollution degree Pollution degree
12 3 4
1 2 Material group Material group Material group
2) 3) 2) I II IIIa IIIb I II IIIa IIIb I II IIIa IIIb
10 0.025 0.04 0.08 0.4 0.4 0.4 1 1 1 1.6 1.6 1.6
12.5 0.025 0.04 0.09 0.42 0.42 0.42 1.05 1.05 1.05 1.6 1.6 1.6
16 0.025 0.04 0.1 0.45 0.45 0.45 1.1 1.1 1,1 1.6 1.6 1.6
20 0,025 0.04 0.11 0.48 0.48 0.48 1.2 1.2 1.2 1.6 1.6 1,6
25 0,025 0.04 0.125 0.5 0.5 0.5 1.25 1.25 1.25 1.7 1.7 1.7
32 0.025 0.04 0.14 0.53 0.53 0.53 1.3 1.3 1.3 1.8 1.8 1.8
40 0.025 0.04 0.16 0.56 0.8 1.1 1.4 1.6 1.8 1.9 2.4 3
50 0.025 0.04 0.18 0.6 0.85 1.2 1.5 1.7 1.9 2 2.5 3.2
63 0.04 0.063 0.2 0.63 0.9 1.25 1,6 1.8 2 2.1 2.6 3.4
80 0.063 0.1 0.22 0.67 0.95 1.3 1.7 1.9 2.1 2.2 2.8 3.6
100 0.1 0.16 0.25 0.71 1 1.4 1.8 2 2.2 2.4 3.0 3.8
125 0.16 0.25 0.28 0.75 1.05 1.5 1.9 2.1 2.4 2.5 3.2 4
160 0.25 0.4 0.32 0.8 1.1 1.6 2 2.2 2.5 3.2 4 5
200 0.4 0.63 0.42 1 1.4 2 2.5 2.8 3.2 4 5 6.3
250 0.56 1 0.56 1.25 1.8 2.5 3.2 3.6 4 5 6.3 8
320 0.75 1.6 0.75 1.6 2.2 3.2 4 4.5 5 6.3 8 10
400 12122.84 55.66.3 81012.5
500 1.3 2.5 1.3 2.5 3.6 5 6.3 7.1 8.0 10 12.5 16
630 1.8 3.2 1.8 3.2 4.5 6.3 8 9 10 12.5 16 20
800 2.4 4 2.4 4 5.6 8 10 11 12.5 16 20 25
1000 3.2 5 3.2 5 7.1 10 12.5 14 16 20 25 32
1250 4.2 6.3 9 12.5 16 18 20 25 32 40
1600 5.6 8 11 16 20 22 25 32 40 50
2000 7.5 10 14 20 25 28 32 40 50 63
2500 10 12.5 18 25 32 36 40 50 63 80
3200 12.5 16 22 32 40 45 50 63 80 100
4000 16 20 28 40 50 56 63 80 100 125
5000 20 25 36 50 63 71 80 100 125 160
6300 25 32 45 63 80 90 100 125 160 200
8000 32 40 56 80 100 110 125 160 200 250
10000 40 50 71 100 125 140 160 200 250 320
Connectors in this catalogue are allocated to fixed rated voltages which
apply to the machine building industry. In case of other applications the
above chart can be used to determine other rated voltages.
Degree of protection
Electrical connector devices have to be protected for safety reasons
from outside influences like dust, foreign objects, direct contact,
moisture and water. This protection is provided on industrial
connectors by the housing latching devices and sealed cable entries.
The degree of protection depends on the type of intended use. The
standard IEC 60529 and/or DIN EN 60529 has specified the degree
of protection and divided them into several classes.
The degree of protection is indicated in the following way: IP 65
Code letters (Internat. Protection)
1st charact. numeral (degree of protection against access
to hazardous parts and against solid foreign objects)
2nd charact. numeral (degree of protection against ingress of water)
The following charts 12 an13 give an overview about all protection
degrees.
heavy
|
mate® Information Technical information
245
1) Remark: Numeral acc. to DIN 40050 part 9, vehicles IP code
Chart 12 Chart 13
1st
charact.
numeral
Brief description Definition
2nd
charact.
numeral
Brief description Definition
0 Non-protected -- 0 Non-protected --
1 Protected against access
to hazardous parts with the
back of a hand. Protected
against solid foreign objects
of ≥50mm Ø.
The probe, sphere of 50mm
Ø, shall not fully penetrate
and shall have adequate
clearance from hazardous
parts.
1 Protected against vertically
falling water drops
Vertically falling drops shall
have no harmful effects.
2 Protected against access to
hazardous parts with a finger.
Protected against solid
foreign objects of
≥12,5mm Ø.
The jointed test finger of
12mm Ø, 80mm length,
shall have adequate clearance
from hazardous parts. The
probe, sphere of 12,5mm Ø,
shall not fully penetrate.
2 Protected against vertically
falling water drops when
enclosure tilted up to 15°
Vertically falling drops shall
have no harmful effects when
the enclosure is tilted at any
angel up to 15° .
3 Protected against access
to hazardous parts with a
tool. Protected against solid
foreign objects of ≥2,5mm Ø.
The probe of 2,5mm Ø shall
not penetrate at all.
3 Protected against spraying
water
Water sprayed at any angle up
to 60° shall have no harmful
effects.
4 Protected against access to
hazardous parts with a wire.
Protected against solid
foreign objects of ≥1mm Ø.
The probe of 1mm Ø shall
not penetrate at all.
4 Protected against splashing
water
Water splashed against the
enclosure from any direction
shall have no harmful effects.
5 Protected against access to
hazardous parts with a wire.
Dust-protected.
The probe of 1mm Ø shall
not penetrate.
Intrusion of dust is not
totally prevented, but dust
shall not penetrate in a
quantity to interfere with
satisfactory operation of
the device or to impair
safety.
5 Protected against water jets Water projected in jets
against the enclosure from
any direction shall have no
harmful effects.
6 Protected against access to
hazardous parts with a wire
Dust-tight.
The probe of 1mm Ø shall
not penetrate.
No intrusion of dust.
6 Protected against powerful
water jets
Water projected in powerful
jets against the enclosure
from any direction shall have
no harmful effects.
7 Protected against the effects
of temporary immersion in
water
Intrusion of water in
quantities causing harmful
effects shall not be possible
when the enclosure is
temporalily immersed in water
for 30 min. in 1m depth.
8 Protected against the effects
of continous immersion in
water
Intrusion of water in
quantities causing harmful
effects shall not be possible
when the enclosure is
continuously immersed in
water under conditions which
shall be agreed between
manufacturer and user but
which are more severe than
for numeral 7.
9K1) Protected against water
during high pressure/steam
jet cleaning
Water projected in powerful
jets with high pressure and
heat against the enclosure
from any direction shall have
no harmful effects.
heavy
|
mate® Information Technical information
246
Cable
For the termination of all Amphenol-industrial connectors we
recommend the use of commercially available high flexible cable acc.
to VDE or other local specifications. Our connectors are designed to
fit these cables especially as far as number of conductors and cable
diameters are concerned.
When selecting cables care must be taken that the cables do not
affect (solvent) the connector or preserve an existing fire resistance.
Sealing
The sealing of the cable entries of all Amphenol-industrial connectors
is with gland bushings. All sealings are made from Neoprene which has
a good resistance against grease, oil and gasoline.
Selection of gland bushings
Beside glands with a fixed inside diameter which equals the number,
there are also glands with variable inside diameters available
(so-called onion glands). The inside diameter of these glands can
be adjusted to the outside cable diameter by cutting out the smaller
rings.
The selection of the appropiate gland bushing depends on the cable
diameter (cable composition) can be made using the following
diagram 5 (see page XXX).
Diagram 5
Number of conductors
Cable dia.
heavy
|
mate® Information Technical information
247
heavy
|
mate® Information Connector glossary
American Wire Gauge (AWG) Contact
System of numerical designations for wire sizes, based on specified
ranges of cross-sectional areas.
Starts with 4/0 (000) at the largest size, going to 3/0, 2/0, 1/0, 1,
2, and up to 40 and beyond for the smallest size. A step of one AWG
number corresponds to a reduction of cross-sectional area of appr. 20 %.
The conductive element in a connector which mates with a
corresponding element to provide an electrical path.
Attenuation Contact resistance
A reduction of power. Occurs naturally when waves travel through
lines, wave guides, or media such as air or water. Is produced
additionally by imperfections in electrical or optical connections
(attenuation in fibre optics), e. g. contact resistance, mismatch, etc.
The electrical resistance of a mated set of contacts under specified
conditions. Tested according to tests 2a, 2b, 2c, of IEC 60 512 -2/
DIN EN 60 512-2.
Bulkhead connector Contact size
Connector designed to be inserted into a panel cutout from the rear
of the panel, thus forming part of the barrier between two spaces.
Back-mounted.
The designation used to differentiate one contact from another. It may
be denoted by one of the following numbering systems:
• numbering system: assigned numbers used to denote the size of the
contact and its related conductor accomodation (e. g. in AWG units),
• current rating system: the related current-carrying capacity is used
to denote the size of the contact,
• cross-sectional area system: reference is made to the cross-
sectional area of the maximum conductor accommodation to
denote the size of the contact, e. g. in mm2.
Clearance Creepage distance
The shortest distance in air between two conductive parts,
see IEC 60664.
The shortest distance along the surface of the insulating material
between two conductive parts. The longer the distance, the less the
risk of arc damage or tracking. Minimum creepage distances are
specified according to the rated voltage and the applicable pollution
degree and Comperative Tracking Index.
Climatic stability Crimped connection
General term describing the behavior of components under various
climatic conditions, e. g. high and low temperatures, tropical climate,
high humidity, moist heat, fungus, atmospheric conditions (industial
atmosphere), reduced air pressure, etc. Climatic conditions for test
purposes are explained in IEC 60068, DIN 46 040.
A solderless connection made by crimping. IEC 60352-2 / DIN IEC
60352 Part 2.
Connector Derating curve
A component which terminates conductors for the purpose of
providing connection and disconnection to
a suitable mating component which shall not be engaged or
disengaged when live. Depending on the fastening to a cabinet, panel,
rack etc. or a cable, they are classified as fixed or free connectors.
A connector comprises one or more contacts and a housing which
may have a separate connector insert and a separate outer housing
or shell.
The method for determining derating is specified in IEC 60 512-3.
Here the combination of ambient temperature (Tu) and the current
(J) leading to the same maximum allowable temperature (Tb) at the
hottest point of the connector are plotted.
Connector housing DIN
The part of a connector into which the insert and the contacts are
assembled. It may function as part of the locking mechanism.
Deutsches Institut für Normung. A German standards organization.
Connector insert Electromagnetic interference (EMI)
An insulating element designed to support and position contacts in a
connector housing.
General term describing the undesirable effects of the immission or
emission of radio frequency fields.
In connectors electromagnetic interference is prevented by shielding.
Shielded connectors normally provide means to connect the screens
of attached cables.
Connector life Funnel entry (restricted entry C146 D series)
The number of mating cycles prior to abrasion of the conductive
contact surface and which does not result in a significant rise of the
contact resistance. Tests according to test 9a of ICE 60512-5 / DIN
EN 60512 Part 5.
Flared or widened entrance to a conductor barrel permitting easier
insertion of the conductor.
248
Insertion or withdrawal force Material group
The force required to fully insert or withdraw a set of mated
connectors without the effect of coupling, locking or similar devices.
The insertion force is usually greater than the withdrawal force.
Classification of insulation materials according to their CTI values (CTI
= Comperative Tracking Index)
Insulation grip Overvoltage category
The area of a crimp contact that has been reshaped around the
insulation of the conductor by compression during the crimping
operation.
A numeral defining a transient overvoltage condition. Overvoltage
categories I, II, III and IV are used.
Insulation resistance Connector with braking capacity (CBC)
The resistance of the insulation between two conductive elements, in
particular, the resistance between two contacts or between a contact
and a metallic housing or shield. Tested according to test 3a of IEC
60512-2 / DIN IEC 60512 Part 2.
A component which may be engaged or disengaged in normal use,
when live or under load. Note: In the sense of this document the
term - live- is used if contacts are under voltage not necessarily with
a current flowing across the contacts. The term - load - is used if a
current is flowing across the contacts.
Intermateable Rated current
Two connectors are intermateable when they are capable of being
connected electrically and mechanically but without regard to their
performance and intermountability.
A current value assigned by the manufacturer which the connector or
PSD can carry continuously (without interruption) and simultaneously
through all its contacts wired with the largest conductor preferrably
at an ambient temperature of 40 °C without the upper temperature
being exceeded.
Locator Shield, shielding
In a crimping tool the device used for positioning a crimp contact or
terminal end.
Shielding of internal or external electric fields by means of a plane
with a uniform electric potential, formed by metal shells or metallic
layers on the inside or outside of plastic shells. The shield is normally
connected to the shielding braid of the cable and/or chassis ground.
Locking lever Terminal block
A mechanical locking device operated by actuating a lever, designed
to hold two mated connectors together. Typically the lever can only be
fully locked if the two connectors are correctly mated.
An assembly of terminals in a housing or body of insulating material
to facilitate interconnection between multiple conductors. Also called
terminal strip or barrier blocks if the terminals are separated by an
insulation barrier.
Mating cycle Wire range
One mating cycle comprises one insertion and one withdrawal
operation. Term used in the definition of connector life.
The range of wire cross sections which is compatible with the
dimensions the terminals of the contact
(wire barrel). The wire range is expressed in mm2 or in AWG numbers.
heavy
|
mate® Information Connector glossary
249
Stamped crimp contacts series C146, stripping length
Termination crimp
[mm2]
Wire gauge Insulation diameter
of the wire [mm]
Min. stripping
length [mm]
Contact
Part Number
Series
mm2AWG
0.09 - 0.25
0.09 - 0.25
28 - 24 0.7 - 1.6 2.3 + 0.4 N01 010 0130 (2) heavy
|
mate® M
N02 010 0130 (2) heavy
|
mate® M
0.14 - 0.5 0.14 26 1.0 - 2.0 3.0 + 0.5 N01 016 0003 heavy
|
mate® D/M
0.25 24-22 N02 016 0003 heavy
|
mate® D/M
0.5 20
0.25 - 0.5 0.25 24-22 1.6 - 2.0 2.3 + 0.4 N01 010 0131 (2) heavy
|
mate® M
0.5 20 N02 010 0131 (2) heavy
|
mate® M
0.5 - 1.5 0.5 20 1.8 - 2.8 3.5 + 1.0 N01 016 0002 heavy
|
mate® D/M
0.75 20 - 18 N02 016 0002 heavy
|
mate® D/M
1.0 18 - 16 N01 016 0015 heavy
|
mate® D
1.5 16 - 15 N02 016 0015 heavy
|
mate® D
N01 025 0001 heavy
|
mate® E/M
N02 025 0001 heavy
|
mate® E/M/S
N01 025 0007 heavy
|
mate® S
1.5 - 2.5 1.5 16 - 15 2.5 - 3.5 3.5 + 1.0 N01 016 0005 heavy
|
mate® D/M
2.5 14 N02 016 0005 heavy
|
mate® D/M
N01 016 0016 heavy
|
mate® D
N02 016 0016 heavy
|
mate® D
N01 025 0010 heavy
|
mate® E/M
N02 025 0010 heavy
|
mate® E/M/S
N01 025 0008 heavy
|
mate® S
2.5 - 4.0 2.5 14 3.3 - 4.2 3.5 + 1.0 N01 025 0043 heavy
|
mate® M
4.0 12 N02 025 0043 heavy
|
mate® M
heavy
|
mate® Information Stripping length
250
Turned crimp contacts series heavy
|
mate®, stripping length
Termination
crimp [mm2]
Min. stripping
length +
Tolerance[mm]
Contact
Part Number
Series Min. stripping
length +
Tolerance[mm]
Contact
Part Number
Series
1,6 (Contact without clip) 2,5 (Contact with clip)
0.14 - 0.37 8 + 1 N01 016 0024
N02 016 0024
heavy
|
mate®
D/DD/M
heavy
|
mate® M
0.5 8 + 1 N01 016 0025
N02 016 0025
heavy
|
mate®
D/DD/M
7 + 1 N01 025 0029
N02 025 0029
heavy
|
mate® M
0.75 - 1.0 8 + 1 N01 016 0026
N02 016 0026
heavy
|
mate®
D/DD/M
7 + 1 N01 025 0030
N02 025 0030
heavy
|
mate® M
1.5 8 + 1 N01 016 0027
N02 016 0027
heavy
|
mate®
D/DD/M
7 + 1 N01 025 0031
N02 025 0031
heavy
|
mate® M
2.5 6 + 1 N01 016 0028
N02 016 0028
heavy
|
mate®
D/DD/M
7 + 1 N01 025 0032
N02 025 0032
heavy
|
mate® M
4.0 7 + 1 N01 025 0033
N02 025 0033
heavy
|
mate® M
2,5 (Contact without clip) 3,6 (Contact with clip)
0.5 7 + 1 N01 025 0035
N02 025 0035
heavy
|
mate®
E/EE
0.75 - 1.0 7 + 1 N01 025 0036
N02 025 0036
heavy
|
mate®
E/EE
1.5 7 + 1 N01 025 0037
N02 025 0037
heavy
|
mate®
E/EE
10 + 1 N01 036 0004
N02 036 0004
heavy
|
mate® M
2.5 7 + 1 N01 025 0038
N02 025 0038
heavy
|
mate®
E/EE
10 + 1 N01 036 0005
N02 036 0005
heavy
|
mate® M
4.0 7 + 1 N01 025 0039
N02 025 0039
heavy
|
mate®
E/EE
10 + 1 N01 036 0001
N02 036 0001
heavy
|
mate® M
6.0 10 + 1 N01 036 0002
N02 036 0002
heavy
|
mate® M
10.0 10 + 1 N01 036 0003
N02 036 0003
heavy
|
mate® M
heavy
|
mate® Information Stripping length
251
heavy
|
mate® Information Stripping length
Time saving through the introduction of stamped contacts
Wiring costs of different contacts
Break Even at about 60.000 contacts per year
General conditions
Maturity (Depreciation)
Interest
Maintenance
Hourly wages
5 years
8 %
5 %
20 €
Non binding declarations are based on experienced values.
Contacts per year
Wiring costs per contact in €
0,00 €
0,05 €
0,10 €
0,15 €
0,20 €
0,25 €
0,30 €
0,35 €
0,40 €
10000 20000 50000 100000 200000 500000 1000000
Screwing manuel
Soldering manuel
Screwing machine
Crimping hand tool
Crimping hand tool with reels
Crimping machine without stripping
Crimping machine with stripping
252
heavy
|
mate® Summary of Part Numbers
Part Number Page Part Number Page Part Number Page Part Number Page
17D 438 SP 145, 154
17 DM 537 401 146, 147, 234
17 DM 537 405 146, 147, 234
17 DM 537 421 146, 147, 234
17 DM 537 425 146, 147, 234
C146 10A003 002 4 18
C146 10A003 102 3 102
C146 10A003 500 15 78, 83
C146 10A004 002 4 18
C146 10A004 100 13 111
C146 10A005 500 12 159
C146 10A006 000 1 48
C146 10A006 002 1 48
C146 10A006 100 13 111
C146 10A006 102 1 48
C146 10A006 102 3 103
C146 10A006 102 5 97
C146 10A006 400 1 48
C146 10A006 500 1 49
C146 10A006 500 15 78, 85
C146 10A006 810 1 72
C146 10A007 000 2 27
C146 10A007 500 2 27
C146 10A007 500 12 161
C146 10A008 000 2 27
C146 10A008 500 2 27
C146 10A008 500 15 78, 87
C146 10A010 000 1 50
C146 10A010 002 1 50
C146 10A010 002 4 19
C146 10A010 102 1 50
C146 10A010 102 3 104
C146 10A010 102 4 19
C146 10A010 400 1 50
C146 10A010 500 1 51
C146 10A010 500 10 65
C146 10A010 810 1 72
C146 10A012 500 15 79, 89
C146 10A015 000 2 28
C146 10A015 060 2 28
C146 10A015 500 2 28
C146 10A016 000 1 52
C146 10A016 002 1 52
C146 10A016 002 3 105
C146 10A016 002 4 20, 21
C146 10A016 004 4 21
C146 10A016 102 1 52
C146 10A016 102 3 105, 106
C146 10A016 102 4 20, 21
C146 10A016 104 3 106
C146 10A016 104 4 21
C146 10A016 400 1 52
C146 10A016 500 1 53
C146 10A016 810 1 73
C146 10A017 500 15 79, 91
C146 10A018 500 10 65
C146 10A020 500 15 79, 93
C146 10A024 000 1 54, 56
C146 10A024 000 9 41
C146 10A024 002 1 54, 56
C146 10A024 005 1 56
C146 10A024 102 1 54, 56
C146 10A024 400 1 54
C146 10A024 500 1 55, 56
C146 10A024 505 1 56
C146 10A024 810 1 73
C146 10A025 000 2 29, 31
C146 10A025 005 2 31
C146 10A025 060 2 29
C146 10A025 500 2 29, 31
C146 10A025 505 2 31
C146 10A032 500 10 66
C146 10A040 000 2 30
C146 10A040 060 2 30
C146 10A040 500 2 30
C146 10A042 000 9 41
C146 10A042 500 13 113
C146 10A046 500 10 66
C146 10A064 000 2 32, 33
C146 10A064 005 2 33
C146 10A064 060 2 32
C146 10A064 500 2 32, 33
C146 10A064 505 2 33
C146 10A072 000 9 41
C146 10A108 000 9 42
C146 10A108 005 9 42
C146 10B003 002 4 18
C146 10B003 102 3 102
C146 10B003 500 15 78, 83
C146 10B004 002 4 18
C146 10B004 100 13 111
C146 10B005 500 12 159
C146 10B006 000 1 48
C146 10B006 002 1 48
C146 10B006 100 13 111
C146 10B006 102 1 48
C146 10B006 102 3 103
C146 10B006 102 5 97
C146 10B006 400 1 48
C146 10B006 500 1 49
C146 10B006 500 15 78, 85
C146 10B006 810 1 72
C146 10B007 000 2 27
C146 10B007 500 2 27
C146 10B007 500 12 161
C146 10B008 000 2 27
C146 10B008 500 2 27
C146 10B008 500 15 78, 87
C146 10B010 000 1 50
C146 10B010 002 1 50
C146 10B010 002 4 19
C146 10B010 102 1 50
C146 10B010 102 3 104
C146 10B010 102 4 19
C146 10B010 400 1 50
C146 10B010 500 1 51
C146 10B010 500 10 65
C146 10B010 810 1 72
C146 10B012 500 15 79, 89
C146 10B015 000 2 28
C146 10B015 060 2 28
C146 10B015 500 2 28
C146 10B016 000 1 52
C146 10B016 002 1 52
C146 10B016 002 3 105
C146 10B016 002 4 20, 21
C146 10B016 004 4 21
C146 10B016 102 1 52
C146 10B016 102 3 105, 106
C146 10B016 102 4 20, 21
C146 10B016 104 3 106
C146 10B016 104 4 21
C146 10B016 400 1 52
C146 10B016 500 1 53
C146 10B016 810 1 73
C146 10B017 500 15 79, 91
C146 10B018 500 10 65
C146 10B020 500 15 79, 93
C146 10B024 000 1 54, 56
C146 10B024 000 9 41
C146 10B024 002 1 54, 56
C146 10B024 005 1 56
C146 10B024 102 1 54, 56
C146 10B024 400 1 54
C146 10B024 500 1 55, 56
C146 10B024 505 1 56
C146 10B024 810 1 73
C146 10B025 000 2 29, 31
C146 10B025 005 2 31
C146 10B025 060 2 29
C146 10B025 500 2 29, 31
C146 10B025 505 2 31
C146 10B032 500 10 66
C146 10B040 000 2 30
C146 10B040 060 2 30
C146 10B040 500 2 30
C146 10B042 000 9 41
C146 10B042 500 13 113
C146 10B046 500 10 66
C146 10B064 000 2 32, 33
C146 10B064 005 2 33
C146 10B064 060 2 32
C146 10B064 500 2 32, 33
C146 10B064 505 2 33
C146 10B072 000 9 41
C146 10B108 000 9 42
C146 10B108 005 9 42
C146 10F003 000 4 166
C146 10F003 004 4 166
C146 10F006 000 1 174
C146 10F006 003 1 174
C146 10F010 000 1 176
C146 10F010 001 1 178
C146 10F010 002 1 180
C146 10F010 003 1 178
C146 10F010 090 1 176
C146 10F015 000 2 168
C146 10F015 003 2 168
C146 10F016 000 1 183
C146 10F016 001 1 184
C146 10F016 002 1 186
C146 10F016 003 1 184
C146 10F024 000 1 189
C146 10F024 000 3 197
C146 10F024 001 1 190
C146 10F024 002 1 192
C146 10F024 003 1 190
C146 10F025 000 2 170
C146 10F025 003 2 170
C146 10F032 000 4 173
C146 10F048 001 1 196
C146 10F048 003 1 196
C146 10N003 500 4 166
C146 10N006 602 2 175
C146 10N006 603 1 175
C146 10N006 603 2 175
C146 10N006 606 2 175
C146 10N006 607 1 175
C146 10N006 607 2 175
C146 10N006 802 2 175
C146 10N006 803 1 175
C146 10N006 806 1 175
C146 10N006 806 2 175
C146 10N006 807 1 175
C146 10N006 807 2 175
C146 10N010 500 1 177
C146 10N010 500 2 177
C146 10N010 501 1 177
C146 10N010 501 2 177
C146 10N010 508 2 181
C146 10N010 509 1 181
C146 10N010 600 2 177
C146 10N010 601 1 177
C146 10N010 601 2 177
C146 10N010 603 1 179
C146 10N010 603 2 179
C146 10N010 604 2 181
C146 10N010 605 1 181
C146 10N010 606 2 179
C146 10N010 607 1 179
C146 10N010 607 2 179
C146 10N010 609 1 181
C146 10N010 609 2 181
C146 10N010 802 2 179
C146 10N010 803 1 179
C146 10N010 803 2 179
C146 10N010 804 2 181
C146 10N010 805 1 181
C146 10N010 806 2 179
C146 10N010 807 1 179
C146 10N010 807 2 179
C146 10N015 500 2 169
C146 10N015 600 2 169
C146 10N015 606 2 169
C146 10N015 607 2 169
C146 10N015 806 2 169
C146 10N016 500 1 183
C146 10N016 500 2 183
C146 10N016 508 1 187
C146 10N016 508 2 187
C146 10N016 600 1 183
C146 10N016 600 2 183
C146 10N016 601 2 183
C146 10N016 602 1 185
C146 10N016 602 2 185
C146 10N016 603 2 185
C146 10N016 604 1 187
C146 10N016 604 2 187
253
heavy
|
mate® Summary of Part Numbers
Part Number Page Part Number Page Part Number Page Part Number Page
C146 10N016 606 1 185
C146 10N016 606 2 185
C146 10N016 607 2 185
C146 10N016 608 1 187
C146 10N016 608 2 187
C146 10N016 802 1 185
C146 10N016 802 2 185
C146 10N016 804 1 187
C146 10N016 804 2 187
C146 10N016 806 1 185
C146 10N016 806 2 185
C146 10N024 500 1 189
C146 10N024 500 2 189
C146 10N024 500 3 197
C146 10N024 508 1 193
C146 10N024 508 2 193
C146 10N024 600 1 189
C146 10N024 600 2 189
C146 10N024 600 3 197
C146 10N024 601 2 189
C146 10N024 602 1 191
C146 10N024 602 2 191
C146 10N024 604 1 193
C146 10N024 604 2 193
C146 10N024 605 2 193
C146 10N024 606 1 191
C146 10N024 606 2 191
C146 10N024 607 2 191
C146 10N024 608 1 193
C146 10N024 608 2 193
C146 10N024 802 1 191
C146 10N024 802 2 191
C146 10N024 804 1 193
C146 10N024 804 2 193
C146 10N024 806 1 191
C146 10N024 806 2 191
C146 10N024 808 1 193
C146 10N025 500 2 171
C146 10N025 600 2 171
C146 10N025 601 2 171
C146 10N025 606 2 171
C146 10N025 607 2 171
C146 10N025 806 2 171
C146 10N032 500 4 173
C146 10N032 550 4 173
C146 10N032 600 4 173
C146 10N032 650 4 173
C146 10N048 803 1 196
C146 10N048 807 1 196
C146 10P006 000 15 80
C146 10P010 000 15 80
C146 10P016 000 15 80
C146 10P024 000 15 81
C146 10R003 500 4 166
C146 10R003 600 4 166
C146 10R003 804 4 166
C146 10R010 902 8 182
C146 10R016 902 8 188
C146 10R016 910 8 188
C146 10R024 500 3 197
C146 10R024 550 3 197
C146 10R024 600 3 197
C146 10R024 650 3 197
C146 10R024 802 3 197
C146 10R024 852 3 197
C146 10R024 903 8 194
C146 10R024 908 8 194
C146 10S006 000 15 80
C146 10S010 000 15 80
C146 10S016 000 15 80
C146 10S024 000 15 81
C146 10Z000 002 8 155
C146 10Z001 001 8 155
C146 10Z002 001 8 155
C146 10Z003 100 4 166
C146 10Z006 100 1 175
C146 10Z006 200 1 175
C146 10Z010 100 1 182
C146 10Z010 200 1 182
C146 10Z015 100 2 169
C146 10Z016 100 1 188
C146 10Z016 200 1 188
C146 10Z024 100 1 194
C146 10Z024 200 1 194
C146 10Z025 100 2 171
C146 11F006 001 8 212
C146 11F006 901 8 212
C146 11F006 902 8 212
C146 11F010 000 8 213
C146 11F010 901 8 213
C146 11F010 902 8 213
C146 11F016 000 8 214
C146 11F016 901 8 214
C146 11F016 902 8 214
C146 11F024 000 8 215
C146 11F024 901 8 215
C146 11F024 902 8 215
C146 11R006 506 1 212
C146 11R006 506 8 212
C146 11R006 507 1 212
C146 11R006 556 1 212
C146 11R006 556 8 212
C146 11R006 606 1 212
C146 11R006 606 8 212
C146 11R006 607 1 212
C146 11R006 656 8 212
C146 11R010 500 1 213
C146 11R010 500 8 213
C146 11R010 550 1 213
C146 11R010 550 8 213
C146 11R010 600 1 213
C146 11R010 600 8 213
C146 11R010 601 1 213
C146 11R010 601 8 213
C146 11R010 650 1 213
C146 11R010 650 8 213
C146 11R016 500 1 214
C146 11R016 500 8 214
C146 11R016 501 8 214
C146 11R016 550 8 214
C146 11R016 600 1 214
C146 11R016 600 8 214
C146 11R016 601 8 214
C146 11R016 650 1 214
C146 11R016 650 8 214
C146 11R024 500 1 215
C146 11R024 500 8 215
C146 11R024 501 8 215
C146 11R024 550 1 215
C146 11R024 550 8 215
C146 11R024 600 1 215
C146 11R024 600 8 215
C146 11R024 601 8 215
C146 11R024 650 1 215
C146 11R024 650 8 215
C146 21R006 506 1 174
C146 21R006 506 8 174
C146 21R006 507 1 174
C146 21R006 556 8 174
C146 21R006 606 1 174
C146 21R006 606 8 174
C146 21R006 656 1 174
C146 21R006 656 8 174
C146 21R006 804 1 174
C146 21R006 854 8 174
C146 21R010 500 1 176
C146 21R010 500 4 168
C146 21R010 500 8 176
C146 21R010 502 8 180
C146 21R010 506 1 178
C146 21R010 506 8 178
C146 21R010 550 1 176
C146 21R010 550 4 168
C146 21R010 550 8 176
C146 21R010 552 1 180
C146 21R010 552 8 180
C146 21R010 556 1 178
C146 21R010 556 8 178
C146 21R010 600 1 176
C146 21R010 600 4 168
C146 21R010 600 8 176
C146 21R010 602 8 180
C146 21R010 606 1 178
C146 21R010 606 8 178
C146 21R010 607 1 178
C146 21R010 607 8 178
C146 21R010 650 1 176
C146 21R010 650 4 168
C146 21R010 650 8 176
C146 21R010 652 1 180
C146 21R010 652 8 180
C146 21R010 656 1 178
C146 21R010 656 8 178
C146 21R010 802 1 176
C146 21R010 802 8 176
C146 21R010 804 1 178
C146 21R010 804 4 168
C146 21R010 804 8 178
C146 21R010 805 1 178
C146 21R010 805 8 178
C146 21R010 852 1 176
C146 21R010 852 8 176
C146 21R010 854 1 178
C146 21R010 854 4 168
C146 21R010 854 8 178
C146 21R015 500 2 168
C146 21R015 550 2 168
C146 21R015 600 2 168
C146 21R015 650 2 168
C146 21R015 804 2 168
C146 21R015 854 2 168
C146 21R016 500 1 183
C146 21R016 500 4 170
C146 21R016 500 8 183
C146 21R016 501 8 183
C146 21R016 502 1 186
C146 21R016 502 8 186
C146 21R016 503 8 186
C146 21R016 506 1 184
C146 21R016 506 8 184
C146 21R016 507 8 184
C146 21R016 550 1 183
C146 21R016 550 4 170
C146 21R016 552 1 186
C146 21R016 556 1 184
C146 21R016 600 1 183
C146 21R016 600 4 170
C146 21R016 600 8 183
C146 21R016 601 8 183
C146 21R016 602 1 186
C146 21R016 602 8 186
C146 21R016 603 8 186
C146 21R016 606 1 184
C146 21R016 606 8 184
C146 21R016 607 8 184
C146 21R016 650 1 183
C146 21R016 650 4 170
C146 21R016 652 1 186
C146 21R016 656 1 184
C146 21R016 802 1 183
C146 21R016 802 8 183
C146 21R016 803 8 183
C146 21R016 804 1 184
C146 21R016 804 4 170
C146 21R016 804 8 184
C146 21R016 805 8 184
C146 21R016 852 1 183
C146 21R016 854 1 184
C146 21R016 854 4 170
C146 21R024 500 1 189
C146 21R024 500 8 189
C146 21R024 501 8 189
C146 21R024 502 1 192
C146 21R024 502 8 192
C146 21R024 503 8 192
C146 21R024 506 1 190
C146 21R024 506 8 190
C146 21R024 507 8 190
C146 21R024 550 1 189
C146 21R024 552 1 192
C146 21R024 556 1 190
C146 21R024 600 1 189
C146 21R024 600 8 189
C146 21R024 601 8 189
C146 21R024 602 1 192
C146 21R024 602 8 192
C146 21R024 603 8 192
C146 21R024 606 1 190
254
heavy
|
mate® Summary of Part Numbers
Part Number Page Part Number Page Part Number Page Part Number Page
C146 21R024 606 8 190
C146 21R024 607 8 190
C146 21R024 650 1 189
C146 21R024 652 1 192
C146 21R024 656 1 190
C146 21R024 802 1 189
C146 21R024 802 8 189
C146 21R024 803 8 189
C146 21R024 804 1 190
C146 21R024 804 8 190
C146 21R024 805 8 190
C146 21R024 852 1 189
C146 21R024 854 1 190
C146 21R025 500 2 170
C146 21R025 550 2 170
C146 21R025 600 2 170
C146 21R025 650 2 170
C146 21R025 804 2 170
C146 21R025 854 2 170
C146 21R032 500 4 172
C146 21R032 502 4 172
C146 21R032 550 4 172
C146 21R032 552 4 172
C146 21R032 600 4 172
C146 21R032 602 4 172
C146 21R032 650 4 172
C146 21R032 652 4 172
C146 21R032 802 4 172
C146 21R032 852 4 172
C146 21R048 507 1 195
C146 21R048 508 1 195
C146 21R048 607 1 195
C146 21R048 608 1 195
C146 30F003 000 4 167
C146 30F003 004 4 167
C146 30F006 003 1 174
C146 30F010 003 1 178
C146 30F016 003 1 184
C146 30F024 003 1 190
C146 30N003 500 4 167
C146 30R003 500 4 167
C146 30R003 600 4 167
C146 30R003 804 4 167
C146 30Z003 100 4 167
C146 50F006 000 1 218
C146 50F010 000 1 219
C146 50F016 000 1 220
C146 50F024 000 1 221
C146 50R006 507 1 218
C146 50R006 607 1 218
C146 50R010 500 1 219
C146 50R010 600 1 219
C146 50R016 500 8 220
C146 50R016 600 8 220
C146 50R024 501 8 221
C146 50R024 601 8 221
C146 67F006 000 8 200
C146 67F010 000 8 201
C146 67F016 000 8 202
C146 67F024 000 8 203
C146 67R006 507 1 200
C146 67R006 607 1 200
C146 67R010 500 1 201
C146 67R010 600 1 201
C146 67R016 500 8 202
C146 67R016 600 8 202
C146 67R024 501 8 203
C146 67R024 601 8 203
C146 68F006 001 1 206
C146 68F010 001 1 207
C146 68F016 001 1 208
C146 68F024 001 1 209
C146 68N006 500 2 206
C146 68N010 500 2 207
C146 68N016 501 2 208
C146 68N024 501 2 209
C146 68R006 500 8 206
C146 68R006 600 8 206
C146 68R010 500 8 207
C146 68R010 600 8 207
C146 68R016 501 8 208
C146 68R016 601 8 208
C146 68R024 501 8 209
C146 68R024 601 8 209
C146 A00 001 E8 155
C146 A01 001 E8 118, 127
C146 A02 001 E8 118, 129
C146 A02 801 E8 118, 131
C146 A03 001 E8 119, 135
C146 A03 501 E8 121, 147
C146 A03 801 E8 119, 133
C146 A05 001 E8 120, 139
C146 A05 100 G8 122, 153
C146 A08 102 E8 122, 153
C146 A10 001 E8 120, 143
C146 A20 001 G8 121, 145
C146 B00 001 E8 155
C146 B01 004 E1 118
C146 B01 004 E8 127
C146 B02 001 E8 118, 129
C146 B02 801 E8 118, 131
C146 B03 001 E8 119, 135
C146 B03 501 E8 147
C146 B03 801 E8 119, 133
C146 B05 001 E8 120, 139
C146 B05 100 G8 122, 153
C146 B08 102 E8 122, 153
C146 B10 001 E8 120, 143
C146 B20 001 G8 121
C146 B20 001 G8 145
C146 C04 001 E8 119, 137
C146 C05 001 E8 119, 137
C146 C05 801 E8 119, 137
C146 C10 001 G8 120, 141
C146 D04 001 E8 119, 137
C146 D05 001 E8 119, 137
C146 D05 801 E8 119, 137
C146 D10 001 E8 120, 141
C146 E12 001 E8 121, 149
C146 F12 001 G8 121, 149
C146 G01 014 G8 122, 151
C146 G01 024 G8 151, 122
C146 G02 014 G8 151, 122
C146 G02 024 G8 151, 122
C146 H01 034 G8 151, 122
C146 H01 044 G8 151, 122
C146 H02 034 G8 151, 122
C146 H02 044 G8 151, 122
C146 N32 009 G1 228
C146 N32 015 G1 228
C146 N32 015 G2 228
C146 N32 025 G1 228
C146 N32 025 G2 228
C146 N32 037 G1 228
C146 N32 050 G1 228
C146 N33 009 G1 228
C146 N33 015 G1 228
C146 N33 025 G1 228
C146 N33 037 G1 228
C146 N33 050 G1 228
C146 P06 001 G8 124
C146 P06 002 G8 124
C146 P10 001 G8 124
C146 P10 002 G8 124
C146 P16 001 G8 124
C146 P16 002 G8 124
C146 P24 001 G8 125
C146 P24 002 G8 125
C146 P24 101 G8 125
C146 P24 102 G8 125
C146 S06 001 G8 124
C146 S06 002 G8 124
C146 S10 001 G8 124
C146 S10 002 G8 124
C146 S16 001 G8 124
C146 S16 002 G8 124
C146 S24 001 G8 125
C146 S24 002 G8 125
C146 S24 101 G8 125
C146 S24 102 G8 125
FG 0200 146 1 60, 137, 154
FG 0300 146 1 36, 37, 43,
89, 91, 143, 141, 153, 154
FG 1000 146 141
FG 0300 146 3 131, 133,
135, 147, 154
FG 0300 146 4 139, 154
FG 0300 146 7 61, 67,
85, 87, 93
FG 1000 146 131, 133, 135,
137, 139, 141, 143, 145, 147, 155
.N01 016 0002 (1) 34
.N01 016 0003 (1) 34
.N01 016 0005 (1) 34
N01 016 0040 8 234
N01 025 0001 (1) 58
N01 025 0010 (1) 58
N01 060 0004 1 129
N01 060 0007 1 129
N01 060 0008 1 129
N01 100 6001 001 127
N01 100 6002 001 127
N01 100 6003 001 127
N02 016 0040 8 234
N02 060 6114 001 129
N02 060 6117 001 129
N02 060 6118 001 129
N02 100 6121 002 127
N02 100 6122 002 127
N02 100 6123 002 127
N06 080 0003 1 228
N06 080 0003 2 228
N06 080 0003 3 228
N06 080 0003 4 228
N07 045 0001 L 228
N15 006 000 9Z 133, 135
N15 010 000 7Z 133, 135
N15 043 0003 003 129, 131
N16 025 0112 5X 217
N16 032 0112 5X 217
N16 040 0112 5X 217
N17 045 000 1 159
N17 059 000 1 161
N17 059 000 2 161
TA 0000 36, 60, 61, 67,
85, 87 ,93, 133, 135 ,
137, 139, 141, 143, 147
TA 0000 121 137
TA 0000 124 61, 67, 85, 87,
93 ,133, 135, 139
TA 0000 141 36, 60, 137, 141
TA 0000 144 61, 67, 85 ,87,
93, 133, 135, 139
TA 0000 163 36, 60, 137, 141
TA 0000 180 133, 135
TA 0000 184 143, 153
TA 0000 202 36, 141
TA 0000 401 147
TA 0000 402 147
TA 0000 oder TA 0500 153
TA 0001 146 000 1 36, 141
TA 0002 146 000 1 36, 141
TA 0003 146 000 1 137
TA 0004 146 000 1 60, 137
TA 0005 146 000 3 60, 137
TA 0007 146 000 3 36, 141
TA 0010 146 000 1 143, 153
TA 0010 146 000 2 133, 139
TA 0010 146 000 3 139
TA 0010 146 000 4 133, 135
TA 0010 146 000 5 135
TA 0010 146 000 6 61
TA 0010 146 000 6 67, 85,
87, 93
TA 0010 146 000 7 61, 67,
85, 87, 93
TA 0100 146 36, 37, 43,
89, 91, 141
TA 0200 146 145
TA 0500 36, 61, 67,
85, 87, 93
TB 0200 146 133, 135
TB 0500 146 143
TB 0600 146 60, 61, 67,
85, 87, 93
TE 0500 103 127
TE 0500 201 127
TE 0500 301 127
255
heavy
|
mate® Summary of Part Numbers
Part Number Page Part Number Page Part Number Page Part Number Page
TE 0600 022 129
TE 0600 042 129
TE 0600 062 129
TE 0600 063 131
TN01 010 0130 (2) 145
TN01 010 0131 (2) 145
TN01 016 0002 (1) 36, 141
TN01 016 0002 (2) 36, 141
TN01 016 0003 (1) 36, 141
TN01 016 0003 (2) 36, 141
TN01 016 0005 (1) 36, 141
TN01 016 0005 (2) 36, 141
TN01 016 0015 (1) 36, 141
TN01 016 0016 (1) 36, 141
TN01 025 0001 (1) 60, 137
TN01 025 0001 (2) 137
TN01 025 0010 (1) 60, 137
TN01 025 0010 (2) 137
TN01 025 0043 (1) 137
TN02 010 0130 (2) 145
TN02 010 0131 (2) 145
TN02 016 0002 (1) 36, 141
TN02 016 0002 (2) 36, 141
TN02 016 0003 (1) 36, 141
TN02 016 0003 (2) 36, 141
TN02 016 0005 (1) 36, 141
TN02 016 0005 (2) 36, 141
TN02 016 0015 (1) 36, 141
TN02 016 0016 (1) 36, 141
TN02 025 0001 (1) 60, 137
TN02 025 0001 (1) 137
TN02 025 0001 (2) 137
TN02 025 0010 (1) 60, 137
TN02 025 0010 (2) 137
TN02 025 0043 (1) 137
VN01 010 0130 (2) 145
VN01 010 0131 (2) 145
VN01 016 0002 (1) 36, 141
VN01 016 0002 (2) 36, 141
VN01 016 0003 (1) 36, 141
VN01 016 0003 (2) 36, 141
VN01 016 0005 (1) 36, 141
VN01 016 0005 (2) 36, 141
VN01 016 0015 (1) 36
VN01 016 0016 (1) 36
VN01 016 0024 (1)C 37, 43,
89, 91, 143, 149, 233
VN01 016 0024 1C 113, 161
VN01 016 0024 (2)C 37, 43,
89, 91, 143, 149
VN01 016 0024 2C 153, 161
VN01 016 0025 (1)C 37, 43,
89, 91, 143, 149, 233
VN01 016 0025 1C 113, 161
VN01 016 0025 (2)C 37, 43,
89, 91, 143, 149, 153, 161
VN01 016 0026 (1)C 37, 43,
89, 91, 143, 149, 233
VN01 016 0026 1C 113, 161
VN01 016 0026 (2)C 37, 43,
89, 91, 143, 149
VN01 016 0026 2C 153, 161
VN01 016 0027 (1)C 37, 43,
89, 91, 143, 149, 233
VN01 016 0027 1C 113, 161
VN01 016 0027 (2)C 37, 43,
89, 91, 143, 149
VN01 016 0027 2C 153, 161
VN01 016 0028 (1)C 37, 43,
89, 91, 143, 149, 233
VN01 016 0028 1C 113, 161
VN01 016 0028 (2)C 37, 43,
89, 91, 143, 149
VN01 016 0028 2C 153, 161
VN01 016 0040 (8) X 143
VN01 025 0001 (101) 60, 137
VN01 025 0001 (102) 60, 137
VN01 025 0010 (101) 60, 137
VN01 025 0010 (102) 60, 137
VN01 025 0029 (1)C 139, 233
VN01 025 0030 (1)C 139, 233
VN01 025 0031 (1)C 139, 233
VN01 025 0032 (1)C 139, 233
VN01 025 0033 (1)C 139, 233
VN01 025 0035 (1)C 61, 67,
85, 87, 93, 233
VN01 025 0035 1C 159
VN01 025 0035 (2)C 61, 67,
85, 87, 93
VN01 025 0035 2C 159
VN01 025 0036 (1)C 61, 67,
85, 87, 93, 233
VN01 025 0036 1C 159
VN01 025 0036 (2)C 61, 67,
85, 87, 93
VN01 025 0036 2C 159
VN01 025 0037 (1)C 61, 67,
85, 87, 93, 233
VN01 025 0037 1C 159
VN01 025 0037 (2)C 61, 67,
85, 87, 93
VN01 025 0037 2C 159
VN01 025 0038 (1)C 61, 67,
85, 87, 93, 233
VN01 025 0038 1C 61, 67,
85, 87, 93
VN01 025 0038 2C 159
VN01 025 0039 (1)C 61, 67,
85, 87, 93, 233
VN01 025 0039 1C 159
VN01 025 0039 (2)C 61, 67,
85, 87, 93
VN01 025 0039 2C 159
VN01 025 0043 (1) 137
VN01 036 0001 (1)C 133, 135,
233
VN01 036 0002 (1)C 135, 233
VN01 036 0003 (1)C 133, 135,
233
VN01 036 0004 (1)C 133, 135,
233
VN01 036 0005 (1)C 133, 135,
233
VN01 036 0021 1C 131
VN01 040 0010 1C 83, 113
VN01 040 0011 1C 83, 113
VN01 040 0012 1C 83, 113
VN01 040 0013 1C 83, 113
VN02 010 0130 (2) 145
VN02 010 0131 (2) 145
VN02 016 0002 (1) 36, 141
VN02 016 0002 (2) 36, 141
VN02 016 0003 (1) 36, 141
VN02 016 0003 (2) 36, 141
VN02 016 0005 (1) 36, 141
VN02 016 0005 (2) 36, 141
VN02 016 0015 (1) 36
VN02 016 0016 (1) 36
VN02 016 0024 (1)C 37, 43,
89, 91, 143, 149, 233
VN02 016 0024 1C 113, 161
VN02 016 0024 (2)C 37, 43,
89, 91, 143, 149
VN02 016 0024 2C 153, 161
VN02 016 0025 (1)C 37, 43,
89, 91, 143, 149, 233
VN02 016 0025 1C 113, 161
VN02 016 0025 (2)C 37, 43,
89, 91, 143, 149
VN02 016 0025 2C 153, 161
VN02 016 0026 (1)C 37, 43,
89, 91, 143, 149, 233
VN02 016 0026 1C 113, 161
VN02 016 0026 (2)C 37, 43,
89, 91, 143, 149
VN02 016 0026 2C 153, 161
VN02 016 0027 (1)C 37, 43,
89, 91, 143, 149, 233
VN02 016 0027 1C 113, 161
VN02 016 0027 (2)C 37, 43,
89, 91, 143, 149
VN02 016 0027 2C 153, 161
VN02 016 0028 (1)C 37, 43,
89, 91, 143, 149, 233
VN02 016 0028 1C 113, 161
VN02 016 0028 (2)C 37, 43,
89, 91, 143, 149
VN02 016 0028 2C 153, 161
VN02 016 0040 (8) X 143
VN02 025 0001 (101) 60, 137
VN02 025 0001 (102) 60, 137
VN02 025 0010 (101) 60, 137
VN02 025 0010 (102) 60, 137
VN02 025 0029 (1)C 139, 233
VN02 025 0030 (1)C 139, 233
VN02 025 0031 (1)C 139, 233
VN02 025 0032 (1)C 139, 233
VN02 025 0033 (1)C 139, 233
VN02 025 0035 (1)C 61, 67,
85, 87, 93, 159, 233
VN02 025 0035 (2)C 61, 67,
85, 87, 93, 159
VN02 025 0036 (1)C 61, 67,
85, 87, 93, 159, 233
VN02 025 0036 (2)C 61, 67,
85, 87, 93, 159
VN02 025 0037 (1)C 61, 67,
85, 87, 93, 159, 233
VN02 025 0037 (2)C 61, 67,
85, 87, 93, 159
VN02 025 0038 (1)C 61, 67,
85, 87, 93, 159, 233
VN02 025 0038 (2)C 61, 67,
85, 87, 93, 159
VN02 025 0039 (1)C 61, 67,
85, 87, 93, 159, 233
VN02 025 0039 (2)C 61, 67,
85, 87, 93, 159
VN02 025 0043 (1) 137
VN02 036 0001 (1)C 133,
135, 233
VN02 036 0002 (1)C 133,
135, 233
VN02 036 0003 (1)C 133,
135, 233
VN02 036 0004 (1)C 133,
135, 233
VN02 036 0005 (1)C 133,
135, 233
VN02 036 0021 1C 131
VN02 040 0010 1C 83, 113
VN02 040 0011 1C 83, 113
VN02 040 0012 1C 83, 113
VN02 040 0013 1C 83, 113
VN03 030 0020 226
VN03 030 0021 226
VN03 030 3000 X 226
VN13 040 0008 (1) X 226
VN13 040 0009 (1) X 226
VN16 020 0113 (1) X 225
VN16 025 0113 (1) X 225
VN16 032 0113 (1) X 225
VN16 040 0113 (1) X 225
VN16 160 0102 V 224
VN16 160 0126 X 225
VN16 160 0127 X 225
VN16 200 0102 V 224
VN16 200 0103 V 224
VN16 200 0114 X 224
VN16 200 0114 X 224
VN16 200 0126 X 225
VN16 200 0127 X 225
VN16 250 0102 V 224
VN16 250 0103 V 224
VN16 250 0114 X 224
VN16 250 0126 X 225
VN16 250 0127 X 225
VN16 320 0102 V 224
VN16 320 0103 V 224
VN16 320 0114 X 224
VN16 320 0126 X 225
VN16 320 0127 X 225
VN16 400 0114 X 224
VN16 400 0126 X 225
VN16 400 0127 X 225
VN16 500 0114 X 224
VN17 050 0004 (1) 226
VN17 050 0004 (101) 226
256
heavy
|
mate® Summary of Part Numbers
Part Number Page Part Number Page Part Number Page Part Number Page
ZN01 010 0130 (2) 145
ZN01 010 0131 (2) 145
ZN01 016 0002 (1) 36, 141
ZN01 016 0002 (2) 36, 141
ZN01 016 0003 (1) 36, 141
ZN01 016 0003 (2) 36, 141
ZN01 016 0005 (1) 36, 141
ZN01 016 0005 (2) 36, 141
ZN01 016 0015 (1) 36, 141
ZN01 016 0016 (1) 36, 141
ZN01 025 0001 (1) 60
ZN01 025 0001 (2) 60
ZN01 025 0010 (1) 60
ZN01 025 0010 (2) 60
ZN02 010 0130 (2) 145
ZN02 010 0131 (2) 145
ZN02 016 0002 (1) 36, 141
ZN02 016 0002 (2) 36, 141
ZN02 016 0003 (1) 36, 141
ZN02 016 0003 (2) 36, 141
ZN02 016 0005 (1) 36, 141
ZN02 016 0005 (2) 36, 141
ZN02 016 0015 (1) 36, 141
ZN02 016 0016 (1) 36, 141
ZN02 025 0001 (1) 60
ZN02 025 0001 (2) 60
ZN02 025 0010 (1) 60
ZN02 025 0010 (2) 60
257
heavy
|
mate® Your notes
258
heavy
|
mate® Your notes
259
heavy
|
mate® Your notes
Amphenol-Tuchel Electronics GmbH
|
August-Haeusser Strasse 10
|
74080 Heilbronn, Germany
Telephone: +49 (0)7131 929 - 0
|
Fax: +49 (0)7131 929 - 486
|
www.amphenol.info
Your engineering sales representative:
Important Notice
All technical data have been measured in a laboratory environment and can be different during practical usage of the product. Any product information is for descriptive usage only and not legally
binding; particularly the information does not constitute or provide any legal guaranties (“Beschaffenheitsgarantie” or “Haltbarkeitsgarantie”).
We reserve the right to change the design due to improvement in quality, development or production requirements. This catalogue must not be used in any form or manner without our prior approval
in writing (Copyright Law, Fair Trading Law, Civil Code).
International
More Amphenol companies can be
found here: www.amphenol.com
Argentina
Amphenol Argentina
Av. Callao 930
2nd Floor Office B “Plaza“
C1023 AAP Buenos Aires
Phone +54 11 4815 68 86
www.amphenol.com.ar
Australia
Amphenol Australia Pty. Ltd.
2 Fiveways Blvd
Keysborough
Victoria 31 73
Phone +61 3 8796 88 88
www.amphenol.com.au
Brazil
Amphenol do Brasil Ltda.
Rua Diogo Moreira 132, 20th Floor
CEP 05423-101 Sao Paulo SP
Phone +55 11 3815 10 03
www.amphenol.com.br
China
Amphenol-Tuchel Electronics
China Branch
20 Taishan Road
Changzhou 213022
Phone +86 0519 511 03 01
www.amphenol.info
France
Amphenol Socapex S.A.S.
948, Promenade de l’Arve, BP 29
Thyez Cedex, 74311
Phone +33 4 5089 28 00
www.amphenol-socapex.com
Singapore
Asia Pacific Sales Operations
72 Bendemeer Rd, No.03-32/33
Hiap Huat House, Luzerne, 339941
Singapore
Phone +65 6294 2128
www.amphenol.com
South Africa
Amphenol International Ltd
Chislehurston
30 Impala Road
2196 Chislehurston
Sandton, 2146
Phone +27 11 7839 517
www.amphenol.co.za
Spain
Amphenol Espana
Edificio Burgosol, Oficina 55
C/Comunidad de Madrid, 35 bis
Las Rozas (Madrid), 28230
Phone +34 91 6407 302
www.amphenol.com
Taiwan
Amphenol East Asia Limited-Taiwan
5F, No. 361, Fusing 1st Rd
Gueishan Township,
Taoyuan County 333
Phone +886 3 2647 200
www.amphenol.com
Amphenol LTW Technology Co., Ltd.
9F, No. 657-12, Zhongzheng Road
Xinzhuang Dist., New Taipei City
242 Taiwan
Phone +886 2 2908 5626
sales@ltw-tech.com
www.amphenolltw.com
Germany
Amphenol-Tuchel Electronics GmbH
August-Haeusser-Str. 10
74080 Heilbronn
Phone +49 7131 929 0
www.amphenol.de
India
Amphenol Interconnect India Pvt Ltd
105, Bhosari Industrial Area
Pune – 411 026
Phone +91 20 2712 04 81
www.amphenol-in.com
Italy
Amphenol-Tuchel Italy
Via Barbaiana n. 5
20020 Lainate (MI)
Phone +39 02 9325 41
www.amphenol.info
Korea
Amphenol DaeShin Elect and
Precision Co.,Ltd
558 Songnae-Dong, Sosa-Gu
Bucheon-City, Kyunggi-Do
Korea 422-130
Phone +82 32 6103 800
www.amphenol.co.kr
Mexico
Amphenol Mexico
Prolongacion Reforma 61 - 6 B2
Col. Paseo de las Lomas
C.P. 01330 Mexico D.F.
Phone +52 55 5258 99 84
www.amphenolmexico.com
Turkey
Amphenol Turkey
Sun Plaza Kat: 15
Maslak Mah. Bilim Sok.No:15
34398 Sisli - Istanbul
Phone: +90 2123 679 220
www.amphenol.com.tr
United Kingdom
Amphenol Limited
Thanet Way, Whitstable
Kent, CT53JF
Phone +44 1227 773 200
www.amphenol.co.uk
USA
Amphenol-Tuchel Electronics
6900 Haggerty Road
Suite 200
Canton, Michigan 48187
Phone +1 7344 516 400
www.amphenol.info
Amphenol Corporation
Corporate Headquarters
358 Hall Avenue
Wallingford, CT 06492
Phone +1 877 2674 366
Phone +1 203 2658 900
www.amphenol.com
ATE 2040 A 1112 / Specifications may be changed without notice. Copyright by Amphenol-Tuchel Electronics GmbH, Germany
