SMA6F5.0A thru SMA6F20A www.vishay.com Vishay General Semiconductor Surface-Mount TRANSZORB(R) Transient Voltage Suppressors FEATURES eSMP(R) Series * Very low profile - typical height of 0.95 mm * Ideal for automated placement * Uni-directional only * Excellent clamping capability Top View Bottom View SlimSMA (DO-221AC) Cathode * Peak pulse power: - 600 W (10/1000 s) - 4 kW (8/20 s) * ESD capability: IEC 61000-4-2 level 4 - 15 kV (air) - 8 kV (contact) Anode * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C DESIGN SUPPORT TOOLS click logo to get started Models * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS Available PRIMARY CHARACTERISTICS VBR 6.4 V to 24.5 V VWM 5.0 V to 20 V PPPM (10 x 1000 s) 600 W PPPM (8 x 20 s) 4000 W PD at TM = 55 C 6W TJ max. 175 C Polarity Uni-directional Package SlimSMA (DO-221AC) Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication. MECHANICAL DATA Case: SlimSMA (DO-221AC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and industrial grade Terminals: matte tin plated leads, solderable J-STD-002 and JESD22-B102 M3 suffix meets JESD 201 class 2 whisker test per Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 C, unless otherwise noted) PARAMETER Peak pulse power dissipation Peak pulse current Power dissipation SYMBOL with a 10/1000 s waveform with a 8/20 s waveform with a 10/1000 s waveform with a 8/20 s waveform PPPM (1) IPPM (1) VALUE 600 4000 See next table TM = 55 C PD (2) 6 TA = 25 C PD (3) 1.0 TSTG -65 to +175 TJ -55 to +175 Storage temperature range Operating junction temperature range UNIT W A W C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2. A (2) Power dissipation mounted on infinite heatsink (3) Power dissipation mounted on minimum recommended pad layout Revision: 16-Oct-2018 Document Number: 89458 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMA6F5.0A thru SMA6F20A www.vishay.com Vishay General Semiconductor INDEX OF SYMBOLS SYMBOL IF PARAMETER VWM Stand-off voltage VBR Breakdown voltage VC Clamping voltage ID Leakage current at VWM VWM VBR VC ID IPP Peak pulse current T Voltage temperature coefficient VF Forward voltage drop RD Dynamic resistance V VF IT IPP Zener Voltage Regulator ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE STAND -OFF VOLTAGE VWM BREAKDOWN VOLTAGE VBR AT IT (1) MIN. MAX. V MAXIMUM REVERSE LEAKAGE ID AT VWM (3) 25 C 85 C mA V A VC AT IPP RD (2) 10/1000 s V RD (2) T (3) 8/20 s MAX. V VC AT IPP MAX. A V MAX. A 10-4/C SMA6F5.0A 6AE 6.40 7.07 10 5 150 375 5.0 9.2 68.0 0.031 13.4 298 0.021 5.7 SMA6F6.0A 6AG 6.70 7.41 10 6 600 1500 6.0 9.5 63.2 0.033 13.7 290 0.022 5.9 SMA6F6.5A 6AK 7.20 7.96 10 6.5 100 250 6.5 10.2 58.8 0.038 14.5 276 0.024 6.1 SMA6F7.5A 6AP 8.33 9.21 1 7.5 50 125 7.5 11.8 50.8 0.051 17.0 235 0.033 6.5 SMA6F8.0A 6AR 8.89 9.83 1 8.0 20 50 8.0 12.8 46.9 0.063 18.2 220 0.038 7.0 SMA6F8.5A 6AT 9.4 10.4 1 8.5 20 50 8.5 13.3 45.1 0.064 18.7 205 0.040 7.3 SMA6F10A 6AX 11.1 12.3 1 10 1.0 5.0 10 15.7 38.2 0.089 19.6 184 0.040 7.8 SMA6F11A 6AZ 12.2 13.5 1 11 1.0 5.0 11 17.2 34.8 0.107 21.5 172 0.047 8.1 SMA6F12A 6BE 13.3 14.7 1 12 0.2 1.0 12 18.8 31.9 0.128 23.5 157 0.056 8.3 SMA6F12AHD 6BF 13.2 14.3 1 12 0.2 1.0 12 18.5 32.4 0.130 22.9 157 0.055 8.4 SMA6F13A 6BG 14.4 15.9 1 13 0.2 1.0 13 20.4 29.4 0.153 23.9 147 0.064 8.4 SMA6F15A 6BM 16.7 18.5 1 15 0.2 1.0 15 23.6 25.4 0.201 27.7 123 0.075 8.8 SMA6F16A 6BP 17.8 19.7 1 16 0.2 1.0 16 25.2 23.8 0.229 29.5 119 0.082 8.8 SMA6F17A 6BR 18.9 20.9 1 17 0.2 1.0 17 26.7 22.5 0.259 31.4 111 0.095 9.0 SMA6F18A 6BT 20.0 22.1 1 18 0.2 1.0 18 28.3 21.2 0.292 33.2 102 0.109 9.2 SMA6F20A 6BV 22.2 24.5 1 20 0.2 1.0 20 31.4 19.1 0.361 36.8 93 0.132 9.4 Notes Pulse test: tp 50 ms (2) To calculate maximum clamping voltage at other surge currents, use following formula: V CL max. = RD x IPP + VBR max. (3) To calculate V BR vs. junction temperature, use following formula: VBR at TJ = VBR at 25 C x (1 + T x (TJ - 25)) (1) THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL VALUE Typical thermal resistance, junction to ambient RJA (1) 150 Typical thermal resistance, junction to mount RJM (2) 20 UNIT C/W Notes (1) Mounted on minimum recommended pad layout (2) Mounted on infinite heatsink Revision: 16-Oct-2018 Document Number: 89458 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMA6F5.0A thru SMA6F20A www.vishay.com Vishay General Semiconductor IMMUNITY TO STATIC ELECTRICAL DISCHARGE TO THE FOLLOWING STANDARDS (TA = 25 C unless otherwise noted) STANDARD IEC 61000-4-2 TEST TYPE Human body model (contact mode) Human body model (air discharge mode) TEST CONDITIONS SYMBOL CLASS C = 150 pF, R = 330 VC 4 VALUE > 8 kV > 15 kV ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMA6F5.0A-M3/6A 0.032 6A 3500 7" diameter plastic tape and reel SMA6F5.0A-M3/6B 0.032 6B 14 000 13" diameter plastic tape and reel Revision: 16-Oct-2018 Document Number: 89458 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMA6F5.0A thru SMA6F20A www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 10 000 CJ - Junction Capacitance (pF) PPPM - Peak Pulse Power (kW) 10 1 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p Measured at Zero Bias 1000 Measured at Stand-off Voltage, VWM 100 0.1 10 100 1000 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 10 000 td - Pulse Width (s) VWM - Reverse Stand-Off Voltage (V) Fig. 4 - Typical Junction Capacitance 100 7 PD - Power Dissipation (W) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % Fig. 1 - Peak Pulse Power Rating Curve 75 50 25 0 T A =T M , mounted on inifinite heatsink 6 5 4 3 2 FR-4 Board, on Minimum Recommended Pad Layout 1 0 0 25 50 75 100 125 150 175 200 0 25 TJ - Initial Temperature (C) Peak Value IPPM 100 Half Value - IPP IPPM 2 50 td = 1000 s td = 20 s td 0 0 1.0 2.0 3.0 t - Time (ms) Fig. 3 - Pulse Waveform 100 125 150 175 200 Fig. 5 - Power Dissipation Derating Curve 4.0 Transient Thermal Impedance (C/W) IPPM - Peak Pulse Current (% IRSM) TJ = 25 C Pulse Width (td) is defined as the Point Where the Peak Current decays to 50 % of IPPM tr = 10 s tr = 8 s 75 TA - Ambient Temperature (C) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature 150 50 1000 100 10 1 0.01 0.1 1 10 100 1000 tp - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Revision: 16-Oct-2018 Document Number: 89458 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMA6F5.0A thru SMA6F20A www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SlimSMA (DO-221AC) Cathode Band 0.057 (1.45) 0.049 (1.25) 0.106 (2.70) 0.098 (2.50) 0.171 (4.35) 0.163 (4.15) 0.211 (5.35) 0.199 (5.05) 0.047 (1.20) 0.030 (0.75) Typ.: 0.019 (0.48) Mounting Pad Layout 0.039 (1.00) 0.035 (0.90) 0.060 (1.52) MIN. 0.012 (0.30) 0.006 (0.15) 0.047 (1.20) MIN. 0.123 (3.12) MAX. 0.217 (5.52) REF. 0.047 (1.20) MIN. Revision: 16-Oct-2018 Document Number: 89458 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: SMA6F10A-M3/6A SMA6F10A-M3/6B SMA6F11A-M3/6A SMA6F11A-M3/6B SMA6F12AHD-M3/6A SMA6F12AHD-M3/6B SMA6F12A-M3/6A SMA6F12A-M3/6B SMA6F13A-M3/6A SMA6F13A-M3/6B SMA6F15AM3/6A SMA6F15A-M3/6B SMA6F16A-M3/6A SMA6F16A-M3/6B SMA6F17A-M3/6A SMA6F17A-M3/6B SMA6F18A-M3/6A SMA6F18A-M3/6B SMA6F20A-M3/6A SMA6F20A-M3/6B SMA6F5.0A-M3/6A SMA6F5.0A-M3/6B SMA6F6.0A-M3/6A SMA6F6.0A-M3/6B SMA6F6.5A-M3/6A SMA6F6.5A-M3/6B SMA6F7.5A-M3/6A SMA6F7.5AM3/6B SMA6F8.0A-M3/6A SMA6F8.0A-M3/6B SMA6F8.5A-M3/6A SMA6F8.5A-M3/6B