077-05FA-LSPZ-C6 - TE CONNECTIVITY / CROMPTON

070 Series ANSI Switchboard Meters

This high quality range of Switchboard instruments complies with the American

specification ANSI-C39.1 (1981) accuracy class 1. Available in 41/2" and 83/4" case sizes,

their rugged design characteristics suit the most demanding of environmental

applications. This extensive range of analogue and digital/analogue meters utilise a

high shock oil dampened movement, and provide 1% accuracy for all RMS AC and

DC ranges. The range offers various customised options and features.

Description

070 series offers two case sizes, 41/2" (Models 075, 077 & 078) and 83/4" (Model 079).

Model 078 is high shock hermetically sealed and all models have heavy gauge

pressed steel cases. Mounting is by four integral studs.

Models 075 & 077 are a one piece flame retardant polycarbonate moulding with a

matt black finished bezel area, and a specially contoured window to minimise

reflection from adjacent light sources. Model 079 has a black pressed steel bezel with

a toughened glass window, and Model 078 has a die-cast bezel and a projecting

moulded toughened glass window, which incorporates a gas tight zero adjuster.

Scales are 240° moving iron and 250° moving coil with parallax error-free platform

dials. Standard dials are matt white with black printed scales and bar knife-edge

pointers. Black dials with white or yellow scales and pointers are also available.

General options include supplementary red pointer (075 & 077), slave pointer,

calibration for non standard ambient temperatures, special scales, trim

potentiometers, and Illuminated dials with white or red light sources.

Specification

Performance: ANSI C39.1 (1981)

Accuracy: Class 1

Terminals: 10-32 UNF terminals (M5 screw clamp terminal for

Model 075)

Dielectric Voltage: Withstand test 2.3kV for 1 minute

Response Time: Approximately 2.5 seconds to full scale (077 and 078)

and 3.5 seconds (079)

Overshoot: 33% maximum

Standard Calibration: 23°C

Operating Temperature: 0°C to +40°C. Model 078: -40°C to +70°C.

Storage Temperature: -10°C to +50°C

Extreme Temp Range: -20°C -to +65°C

Enclosure Integrity: Models 075/077/079 to IP54(NEMA 3S) splash proof

IP55 (NEMA 4) hoseproof is an optional extra

Model 078 to IP67 (NEMA 6 & 6P)

Fixing on Panel: 4 integral 1/4 -28 UNF fixing studs

Approvals: EMC and LVD, UL, CSA, ABS and ISSep Approvals

Dimensions

Model Panel Cut-out Rear

View

Dia A B C D E F G

075 103 86 43 110 17 - 30 101

077 103 86 43 110 17 - 30 101

078 103 86 43 110 17 - 30 101

079 229 86 43 229 17 - 30 101

Dimension E varies with measured parameter - see product code table overleaf.

1 – 4 Fixing holes Ø 8mm. 2 – 1/4-28 UNF fixing studs. 3 – 10-32 UNF Terminals (M5

screw clamp terminal on model 075).

Features

Rugged Hi-Q taut-band suspension

Accuracy class 1

JIS dimensioned product available

on request

Benefits

Meets all the requirements of

ANSI-C39.1 (1981)

Parallax error-free platform dials

Bump, Shock and vibration proof

Customised options and features

Applications

Switchgear

Distribution systems

Generator sets

Control panels

Energy management

Building management

Utility power monitoring

Process control

Motor control

Approvals

UL approvals file No: E87815

CSA approvals file No: LR99712-1

ABS American Bureau of Shipping

approvals 93-LD 17806-X

ISSeP Institute Scientifique de Service

Public approvals 97D.101.226x

070 Series ANSI Switchboard Meters

Product Codes

Case Code

Type of Instrument Ranges 075 077 078 079 Product Code

A.C. Ammeter Moving iron 0.5-10A 56 56 - - 075/077-08A

A.C. Ammeter Moving iron 0.5-10A - - 86 86 078/079-08A

A.C. Ammeter Moving iron 10.1-30A - 86 86 86 077/078/079-08A

Slave Pointer Ammeter 1 or 5A 86 077-08D

6 x overload A.C. Ammeter 5/30A - 30/180A - 86 86 86 077/078/079-086

A.C Voltmeter Moving iron 30-800V - 86 86 86 077/078/079-08V

A.C. Rectified Ammeter 1-30A 56 56 86 56 075/077/078/079-05B

A.C. Rectified Voltmeter 30-800V 56 56 86 56 075/077/078/079-05W

A.C. Voltmeter expanded scale 110-130V - 86 86 86 077/078/079-05Y

A.C. RMS Ammeter 1-30A 56 56 86 56 075/077/078/079-05F

A.C. RMS Voltmeter 150-750V 56 56 86 56 075/077/078/079-05G

Slave Pointer Voltmeter 50-300V 86 077-05X

Elapsed time meter (99999.99)

50 or 60Hz / 100-440V* and D.C.

- 56 56 - 077/078-155/156/077-151

Frequency meter 50 or 60 or

400Hz/100-440V** 86 86 86 86 075/077/078/079-41L

A.C. Wattmeter or Varmeter 0.2-10A/100-440V* - 132 132 132 077/078/079-21 or 31

360˚ Rotary Power factor meter 0.2-10A/100-600V - 132 132 132 077/078/079-13

360˚ Rotary synchroscope 100/125V, 200/250, 380/450*** - 132 132 132 077/078/079-14

LED Synchroscope only 63.5-480V**** - 86 - - 077-14A

LED Synchroscope &

Synchro Check Relay 63.5-480V**** - 86 - - 077-14

A.C. Meter relay A.C.6V-500V, - 86 - - 077-30

100µA-1A, 5A via C.T. (see Meter Relay section)

Phase sequence indicator 100-150, 151-300, 301-500V - 56 - - 077-12P

Maximum demand Indicator 1 or 5A - 86 - - 077-16

Tap position indicator 1-18 steps. 400Ω- 86 - - 077-45P

Transducer operated indicator 1, 5, 10, 20, or 4/20mA 56 56 56 56 075/077/078/079-05

D.C. Ammeter Moving Coil 200µA - 30A 56 56 56 56 075/077/078/079-05A

D.C. Voltmeter Moving Coil 50mV-600V 56 56 56 56 075/077/078/079-05V

D.C. Meter relay 100mV-500V, 10µA-15A - 86 - - 077-30

(see Meter Relay section)

Temperature Indicator RTD - 86 86 86 077/078/079-45R

Temperature Indicator Thermocouple - 86 86 86 077/078/079-45T

240° Phase Angle 1 or 5A, 100-400V

/Power Factor 50, 60 or 400Hz - 132 132 132 077/078/079-42

Watt/hour Indicators:

Watt/hour indicator 1 or 5A / 69-277V**** - 132 - - 077-KH

Transducer operated 1, 5, 10, 20, or 4/20mA - 132 132 - 077-KH

Analogue/LED Digital indicators

A.C. Ammeter 1mA - 10A - 86 - - 077-DIB

A.C. Voltmeter 200mV - 600V - 86 - - 077-DIW

A.C. Wattmeter 69V/5A, 120V/5A, 50 or 60Hz - 86 - - 077-DW

A.C. Varmeter 120V/5A, 208V/5A, 50 or 60Hz - 86 - - 077-DX

Phase Angle meter 69V/5A, 120V/5A, 50 or 60Hz - 86 - - 077-DP

Frequency meter 110/130V, 50 or 60Hz - 86 - - 077-DZ

D.C. Ammeter 1mA - 1A - 86 - - 077-DIA

D.C. Voltmeter 20mV - 600V - 86 - - 077-DIV

Transducer Indicator D.C. Milliamps - 86 - - 077-DIT

Tachometer A.C. or D.C. rated - 86 - - 077-DI2

* 100-440V = (100/125, 200/250, 380/440)

** 100-440V = (100/125,200/250, 380/440). Frequencies 45/55,55/65,45/65, 47/53, 57/63, 360/440.

*** Using transformer box 855-954

**** Nominal voltage to be specified

For specification and connection diagrams, please refer to equivalent models in 240 Series DIN Panel Meter section.

Replace 244 with 077 etc., e.g. 244-210 becomes 077-210.

070 Series ANSI Switchboard Meters

A.C. & D.C. Ammeters, Voltmeters

and Frequency Meters

This range of self contained Hi-Q taut band moving coil meters feature with 250°

linear scale and oil dampened mechanisms for superior performance in high

vibration situations. AC instruments are available with true RMS converting circuit

or RMS compensated rectifier. Some types of frequency meters can be damaged by

transient supply voltage spikes. Crompton 077-41 frequency meters can withstand,

without damage, 10 successive applications of transient spikes of 1250 volts.

The range offers UL and CSA approvals. JIS dimensioned products are available

on request.

Specification – General

Manufactured in accordance with American National Standards ANSI C39.1, 1981

Accuracy: ±1% full scale at 23°C (73°F)

Scale Arc: 250° full scale deflection

Scale Length: 077 & 078: 175.2 mm (6.9")

079: 353 mm (13.9")

Scale Plate: 2 piece, platform type

Response Time: 077 & 078: Approximately 2.5 seconds to full scale

079: Approximately 3.5 seconds to full scale

Operating Temperature: 0 to 40°C (32 to 104°F)

Storage Temperature: -10 to +50°C (14 to 122°F)

Extreme Temp Range: -20° to +65°C (-4° to +149°F)

Terminals: Standard 10-32 UNF stud Optional M5 screw clamp

Position of Use: Vertical (scale)

Dielectric Withstand: 2300V A.C. for 1 minute between electrical circuit

and case

Overshoot: 33% maximum

Enclosure Code: 077 & 079: IP54, optional IP55

078: IP67

Approvals: EMC and LVD. UL recognised File No: E87815.

CSA recognised File No: LR99712-1

Specification – Ammeters and Voltmeters

Overload Rating: A.C. Ammeters - 2 x continuous, 50 x for 1 second

A.C. Voltmeters and frequency meters - 1.2 x continuous

D.C. Ammeters - 2 x continuous 10 x for 1 second

D.C. Voltmeters - 1.2 x continuous

Frequency Range: A.C. calibration 60Hz ±20%

Specification – Frequency Meters

Response Time: 3 seconds maximum

External Temperature 0.6 times accuracy maximum with ±10°C

Influence: from reference temperature

External Field Influence: 2.0 times accuracy maximum with 0.5mT field

Acceptable input Up to 30% distortion

Harmonic Content:

Maximum Frequency Center Scale Error In

Hz Hz Hz

45-55 50 0.15

46-54 50 0.15

45-65 55 0.25

50-70 60 0.25

55-65 60 0.15

56-64 60 0.15

58-62 60 0.08

350-450 400 1.30

360-440 400 1.25

380-420 400 0.80

070 Series ANSI Switchboard Meters

Moving Iron A.C. Ammeters

Product Codes – Self Contained 40/70Hz (Accuracy ±1%, 60Hz)***

41⁄2" Square Flange 83⁄4" Square Flange

Rating Scaling* Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

1A 0-1A •/+077-08AA-LALA-C6 078-08AJ-LALA-C6 •079-08AA-LALA-C6

1.5A 0-1.5A •/+077-08AA-LCLC-C6 078-08AJ-LCLC-C6 •079-08AA-LCLC-C6

2A 0-2A •/+077-08AA-LELE-C6 078-08AJ-LELE-C6 •079-08AA-LELE-C6

3A 0-3A •/+077-08AA-LJLJ-C6 078-08AJ-LJLJ-C6 •079-08AA-LJLJ-C6

5A 0-5A •/+077-08AA-LSLS-C6 078-08AJ-LSLS-C6 •079-08AA-LSLS-C6

7.5A 0-7.5A •/+077-08AA-MFMF-C6 078-08AJ-MFMF-C6 •079-08AA-MFMF-C6

10A 0-10A •/+077-08AA-MTMT-C6 078-08AJ-MTMT-C6 •079-08AA-MTMT-C6

15A 0-15A •/+077-08AA-NDND-C6 078-08AJ-NDND-C6 •079-08AA-NDND-C6

20A 0-20A •/+077-08AA-NGNG-C6 078-08AJ-NGNG-C6 •079-08AA-NGNG-C6

30A 0-30A •/+077-08AA-NLNL-C6 078-08AJ-NLNL-C6 •079-08AA-NLNL-C6

Product Codes – Transformer Rated 40/70Hz - Burden 0.3VA***

5 A 0-10A •/+077-08AA-LSMT-C6 078-08AJ-LSMT-C6 •079-08AA-LSMT-C6

5 A 0-15A •/+077-08AA-LSND-C6 078-08AJ-LSND-C6 •079-08AA-LSND-C6

5 A 0-20A •/+077-08AA-LSNG-C6 078-08AJ-LSNG-C6 •079-08AA-LSNG-C6

5 A 0-25A •/+077-08AA-LSNJ-C6 078-08AJ-LSNJ-C6 •079-08AA-LSNJ-C6

5 A 0-30A •/+077-08AA-LSNL-C6 078-08AJ-LSNL-C6 •079-08AA-LSNL-C6

5 A 0-40A •/+077-08AA-LSNP-C6 078-08AJ-LSNP-C6 •079-08AA-LSNP-C6

5 A 0-50A •/+077-08AA-LSNT-C6 078-08AJ-LSNT-C6 •079-08AA-LSNT-C6

5 A 0-75A •/+077-08AA-LSPB-C6 078-08AJ-LSPB-C6 •079-08AA-LSPB-C6

5 A 0-100A •/+077-08AA-LSPK-C6 078-08AJ-LSPK-C6 •079-08AA-LSPK-C6

5 A 0-150A •/+077-08AA-LSPZ-C6 078-08AJ-LSPZ-C6 •079-08AA-LSPZ-C6

5 A 0-200A •/+077-08AA-LSRL-C6 078-08AJ-LSRL-C6 •079-08AA-LSRL-C6

5 A 0-250A •/+077-08AA-LSRS-C6 078-08AJ-LSRS-C6 •079-08AA-LSRS-C6

5 A 0-300A •/+077-08AA-LSRX-C6 078-08AJ-LSRX-C6 •079-08AA-LSRX-C6

5 A 0-400A •/+077-08AA-LSSC-C6 078-08AJ-LSSC-C6 •079-08AA-LSSC-C6

5 A 0-500A •/+077-08AA-LSSF-C6 078-08AJ-LSSF-C6 •079-08AA-LSSF-C6

5 A 0-600A •/+077-08AA-LSSJ-C6 078-08AJ-LSSJ-C6 •079-08AA-LSSJ-C6

5 A 0-800A •/+077-08AA-LSSN-C6 078-08AJ-LSSN-C6 •079-08AA-LSSN-C6

5 A 0-1000A •/+077-08AA-LSSS-C6 078-08AJ-LSSS-C6 •079-08AA-LSSS-C6

5 A 0-1200A •/+077-08AA-LSSU-C6 078-08AJ-LSSU-C6 •079-08AA-LSSU-C6

5 A 0-1500A •/+077-08AA-LSTC-C6 078-08AJ-LSTC-C6 •079-08AA-LSTC-C6

5 A 0-1600A •/+077-08AA-LSTE-C6 078-08AJ-LSTE-C6 •079-08AA-LSTE-C6

5 A 0-2000A •/+077-08AA-LSTM-C6 078-08AJ-LSTM-C6 •079-08AA-LSTM-C6

5 A 0-2500A •/+077-08AA-LSTU-C6 078-08AJ-LSTU-C6 •079-08AA-LSTU-C6

5 A 0-3000A •/+077-08AA-LSUA-C6 078-08AJ-LSUA-C6 •079-08AA-LSUA-C6

5 A 0-4000A •/+077-08AA-LSUE-C6 078-08AJ-LSUE-C6 •079-08AA-LSUE-C6

5 A 0-5000A •/+077-08AA-LSUJ-C6 078-08AJ-LSUJ-C6 •079-08AA-LSUJ-C6

5 A 0-6000A •/+077-08AA-LSUP-C6 078-08AJ-LSUP-C6 •079-08AA-LSUP-C6

5 A 0-7000A •/+077-08AA-LSUS-C6 078-08AJ-LSUS-C6 •079-08AA-LSUS-C6

5 A 0-8000A •/+077-08AA-LSUW-C6 078-08AJ-LSUW-C6 •079-08AA-LSUW-C6

Product Code – A.C. Overload Ammeters - True RMS Reading***

Self contained 40/70Hz (Accuracy ±1%)

5/30A TO SUIT 077-086A-LS**-C6 078-086J-LS**-C6 079-086A-LS**-C6

077 moving iron ammeters available as listed above

Rated 5A for standard C.T’s with 6 x full scale. * Other scales are available

Overload portion of the scale is not subject to ** Specify scale required

the accuracy guarantee. *** Case types 077/078/079 use 10-32

• UL recognised File # E87815

UNF terminals. For M5 screw clamp

+ CSA Approved File # LR52592 terminals stipulate case type 075

A.C. Overload Ammeters

070 Series ANSI Switchboard Meters

Moving Iron A.C. Voltmeters

Product Codes – Self Contained 60Hz ±20% (Accuracy ±1%)***

41⁄2" Square Flange 83⁄4" Square Flange

Rating Scaling* Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

150V 0-150V •/+077-08VA-PZPZ-C6 078-08VJ-PZPZ-C6 •079-08VA-PZPZ-C6

250V 0-250V •/+077-08VA-RSRS-C6 078-08VJ-RSRS-C6 •079-08VA-RSRS-C6

300V 0-300V •/+077-08VA-RXRX-C6 078-08VJ-RXRX-C6 •079-08VA-RXRX-C6

500V 0-500V •/+077-08VA-SFSF-C6 078-08VJ-SFSF-C6 •079-08VA-SFSF-C6

600V 0-600V •/+077-08VA-SJSJ-C6 078-08VJ-SJSJ-C6 •079-08VA-SJSJ-C6

750V 0-750V 077-08VA-SMSM-C6 078-08VJ-SMSM-C6 079-08VA-SMSM-C6

Product Codes – Transfomer Rated 50/60HZ (Accuracy ±1%) 0.8VA

@150V***

150V 0-300V •/+077-08VA-PZRX-C6 078-08VJ-PZRX-C6 •079-08VA-PZRX-C6

150V 0-600V •/+077-08VA-PZSJ-C6 078-08VJ-PZSJ-C6 •079-08VA-PZSJ-C6

150V 0-750V •/+077-08VA-PZSM-C6 078-08VJ-PZSM-C6 •079-08VA-PZSM-C6

150V 0-3000V •/+077-08VA-PZUA-C6 078-08VJ-PZUA-C6 •079-08VA-PZUA-C6

150V 0-5250V •/+077-08VA-PZUL-C6 078-08VJ-PZUL-C6 •079-08VA-PZUL-C6

150V 0-6000V •/+077-08VA-PZUP-C6 078-08VJ-PZUP-C6 •079-08VA-PZUP-C6

150V 0-9000V •/+077-08VA-PZUY-C6 078-08VJ-PZUY-C6 •079-08VA-PZUY-C6

150V 0-15KV •/+077-08VA-PZWC-C6 078-08VJ-PZWC-C6 •079-08VA-PZWC-C6

150V 0-18KV •/+077-08VA-PZWD-C6 078-08VJ-PZWD-C6 •079-08VA-PZWD-C6

150V 0-45KV •/+077-08VA-PZWJ-C6 078-08VJ-PZWJ-C6 •079-08VA-PZWJ-C6

250V 0-600V •/+077-08VA-RSSJ-C6 078-08VJ-RSSJ-C6 •079-08VA-RSSJ-C6

• UL recognised File # E87815 * Other scales are available

+ CSA Approved File # LR52592 *** Case types 077/078/079 use 10-32

UNF terminals. For M5 screw

clamp terminals stipulate case

type 075

A.C. Voltmeter

070 Series ANSI Switchboard Meters

RMS Reading A.C. Ammeters

Product Codes – Self Contained 40/70Hz (Accuracy ±1%, 60Hz)***

41⁄2" Square Flange 83⁄4" Square Flange

Rating Scaling* Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

1A 0-1A •/+077-05FA-LALA-C6 078-05FJ-LALA-C6 •079-05fA-LALA-C6

1.5A 0-1.5A •/+077-05FA-LCLC-C6 078-05fJ-LCLC-C6 •079-05fA-LCLC-C6

2A 0-2A •/+077-05FA-LELE-C6 078-05fJ-LELE-C6 •079-05fA-LELE-C6

3A 0-3A •/+077-05FA-LJLJ-C6 078-05fJ-LJLJ-C6 •079-05fA-LJLJ-C6

5A 0-5A •/+077-05FA-LSLS-C6 078-05fJ-LSLS-C6 •079-05fA-LSLS-C6

7.5A 0-7.5A •/+077-05FA-MFMF-C6 078-05fJ-MFMF-C6 •079-05fA-MFMF-C6

10A 0-10A •/+077-05FA-MTMT-C6 078-05fJ-MTMT-C6 •079-05fA-MTMT-C6

15A 0-15A •/+077-05FA-NDND-C6 078-05fJ-NDND-C6 •079-05fA-NDND-C6

20A 0-20A •/+077-05FA-NGNG-C6 078-05fJ-NGNG-C6 •079-05fA-NGNG-C6

30A 0-30A •/+077-05FA-NLNL-C6 078-05fJ-NLNL-C6 •079-05fA-NLNL-C6

For A.C. rectified non-RMS compensated meter please replace the -05F in the product code

with -05B.

Product Codes – Transformer Rated 40/70Hz - Burden 0.3VA***

5 A 0-10A •/+077-05FA-LSMT-C6 078-05FJ-LSMT-C6 •079-05FA-LSMT-C6

5 A 0-15A •/+077-05FA-LSND-C6 078-05FJ-LSND-C6 •079-05FA-LSND-C6

5 A 0-20A •/+077-05FA-LSNG-C6 078-05FJ-LSNG-C6 •079-05FA-LSNG-C6

5 A 0-25A •/+077-05FA-LSNJ-C6 078-05FJ-LSNJ-C6 •079-05FA-LSNJ-C6

5 A 0-30A •/+077-05FA-LSNL-C6 078-05FJ-LSNL-C6 •079-05FA-LSNL-C6

5 A 0-40A •/+077-05FA-LSNP-C6 078-05FJ-LSNP-C6 •079-05FA-LSNP-C6

5 A 0-50A •/+077-05FA-LSNT-C6 078-05FJ-LSNT-C6 •079-05FA-LSNT-C6

5 A 0-75A •/+077-05FA-LSPB-C6 078-05FJ-LSPB-C6 •079-05FA-LSPB-C6

5 A 0-100A •/+077-05FA-LSPK-C6 078-05FJ-LSPK-C6 •079-05FA-LSPK-C6

5 A 0-150A •/+077-05FA-LSPZ-C6 078-05FJ-LSPZ-C6 •079-05FA-LSPZ-C6

5 A 0-200A •/+077-05FA-LSRL-C6 078-05FJ-LSRL-C6 •079-05FA-LSRL-C6

5 A 0-250A •/+077-05FA-LSRS-C6 078-05FJ-LSRS-C6 •079-05FA-LSRS-C6

5 A 0-300A •/+077-05FA-LSRX-C6 078-05FJ-LSRX-C6 •079-05FA-LSRX-C6

5 A 0-400A •/+077-05FA-LSSC-C6 078-05FJ-LSSC-C6 •079-05FA-LSSC-C6

5 A 0-500A •/+077-05FA-LSSF-C6 078-05FJ-LSSF-C6 •079-05FA-LSSF-C6

5 A 0-600A •/+077-05FA-LSSJ-C6 078-05FJ-LSSJ-C6 •079-05FA-LSSJ-C6

5 A 0-800A •/+077-05FA-LSSN-C6 078-05FJ-LSSN-C6 •079-05FA-LSSN-C6

5 A 0-1000A •/+077-05FA-LSSS-C6 078-05FJ-LSSS-C6 •079-05FA-LSSS-C6

5 A 0-1200A •/+077-05FA-LSSU-C6 078-05FJ-LSSU-C6 •079-05FA-LSSU-C6

5 A 0-1500A •/+077-05FA-LSTC-C6 078-05FJ-LSTC-C6 •079-05FA-LSTC-C6

5 A 0-1600A •/+077-05FA-LSTE-C6 078-05FJ-LSTE-C6 •079-05FA-LSTE-C6

5 A 0-2000A •/+077-05FA-LSTM-C6 078-05FJ-LSTM-C6 •079-05FA-LSTM-C6

5 A 0-2500A •/+077-05FA-LSTU-C6 078-05FJ-LSTU-C6 •079-05FA-LSTU-C6

5 A 0-3000A •/+077-05FA-LSUA-C6 078-05FJ-LSUA-C6 •079-05FA-LSUA-C6

5 A 0-4000A •/+077-05FA-LSUE-C6 078-05FJ-LSUE-C6 •079-05FA-LSUE-C6

5 A 0-5000A •/+077-05FA-LSUJ-C6 078-05FJ-LSUJ-C6 •079-05FA-LSUJ-C6

5 A 0-6000A •/+077-05FA-LSUP-C6 078-05FJ-LSUP-C6 •079-05FA-LSUP-C6

5 A 0-7000A •/+077-05FA-LSUS-C6 078-05FJ-LSUS-C6 •079-05FA-LSUS-C6

5 A 0-8000A •/+077-05FA-LSUW-C6 078-05FJ-LSUW-C6 •079-05FA-LSUW-C6

For A.C. rectified non-RMS compensated meter please replace the -05F in the product code

with -05B.

Rated 5A for standard C.T’s with 6 x full scale. * Other scales are available

Overload portion of the scale is not subject ** Specify scale required

to the accuracy guarantee. *** Case types 077/078/079 use 10-32

• UL recognised File # E87815

UNF terminals. For M5 screw clamp

+ CSA Approved File # LR52592 terminals stipulate case type 075

A.C. Ammeter

070 Series ANSI Switchboard Meters

A.C. Voltmeter

RMS Reading AC Voltmeters

Product Codes – Self Contained 60Hz ±20% (Accuracy ±1%)***

41⁄2" Square Flange 83⁄4" Square Flange

Rating Scaling* Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

150V 0-150V •/+077-05GA-PZPZ-C6 078-05GJ-PZPZ-C6 •079-05GA-PZPZ-C6

250V 0-250V •/+077-05GA-RSRS-C6 078-05GJ-RSRS-C6 •079-05GA-RSRS-C6

300V 0-300V •/+077-05GA-RXRX-C6 078-05GJ-RXRX-C6 •079-05GA-RXRX-C6

500V 0-500V •/+077-05GA-SFSF-C6 078-05GJ-SFSF-C6 •079-05GA-SFSF-C6

600V 0-600V •/+077-05GA-SJSJ-C6 078-05GJ-SJSJ-C6 •079-05GA-SJSJ-C6

750V 0-750V 077-05GA-SMSM-C6 078-05GJ-SMSM-C6 079-05GA-SMSM-C6

For A.C. rectified non-RMS compensated meter please replace the -05G in the product code

with -05W.

Product Codes – Transfomer Rated 50/60HZ (Accuracy ±1%) 0.8VA

@150V***

150V 0-300V •/+077-05GA-PZRX-C6 078-05GJ-PZRX-C6 •079-05GA-PZRX-C6

150V 0-600V •/+077-05GA-PZSJ-C6 078-05GJ-PZSJ-C6 •079-05GA-PZSJ-C6

150V 0-750V •/+077-05GA-PZSM-C6 078-05GJ-PZSM-C6 •079-05GA-PZSM-C6

150V 0-3000V •/+077-05GA-PZUA-C6 078-05GJ-PZUA-C6 •079-05GA-PZUA-C6

150V 0-5250V •/+077-05GA-PZUL-C6 078-05GJ-PZUL-C6 •079-05GA-PZUL-C6

150V 0-6000V •/+077-05GA-PZUP-C6 078-05GJ-PZUP-C6 •079-05GA-PZUP-C6

150V 0-9000V •/+077-05GA-PZUY-C6 078-05GJ-PZUY-C6 •079-05GA-PZUY-C6

150V 0-15KV •/+077-05GA-PZWC-C6 078-05GJ-PZWC-C6 •079-05GA-PZWC-C6

150V 0-18KV •/+077-05GA-PZWD-C6 078-05GJ-PZWD-C6 •079-05GA-PZWD-C6

150V 0-45KV •/+077-05GA-PZWJ-C6 078-05GJ-PZWJ-C6 •079-05GA-PZWJ-C6

250V 0-600V •/+077-05GA-RSSJ-C6 078-05GJ-RSSJ-C6 •079-05GA-RSSJ-C6

For A.C. rectified non-RMS compensated meter please replace the -05G in the product code

with -05W.

Product Codes – Expanded Scale - Moving Coil Zener Diode***

(Accuracy ±0.3% of mid scale value) Self contained, 20-1000Hz

110-130V

110-130V 077-05YA-PNPN-C6 078-05YJ-PNPN-C6 079-05YA-PNPN-C6

110-130V

TO SUIT P.T

077-05YA-PN**-C6 078-05YJ-PN**-C6 079-05YA-PN**-C6

Product Codes – Instantaneous A.C. Voltmeter***

with Instantaneous Maximum Reading Slave Pointer

150V

TO SUIT P.T

077-05XA-PZ**-C6

250V

TO SUIT P.T

077-05XA-RS**-C6

300V

TO SUIT P.T

077-05XA-RX**-C6

077 moving iron ammeters and voltmeters available as listed above.

• UL recognised File # E87815 * Other scales are available

+ CSA Approved File # LR52592 ** Specify scale required

*** Case types 077/078/079 use 10-32

UNF terminals. For M5 screw clamp

terminals stipulate case type 075

A.C. Voltmeter – Expanded Scale

070 Series ANSI Switchboard Meters

D.C. Ammeter

Intrinsically Safe Milliammeters

(Accuracy ±1%)

ISSEP Certified

Rating Std Case

Catalogue No.

1mA D.C. 077-11AF-FA**

5mA D.C. 077-11AF-FX**

10mA D.C. 077-11AF-HA**

20mA D.C. 077-11AF-HF**

4/20mA D.C. 077-11RFHG**

** State scale marking as required

• UL recognised File # E87815

+ CSA Approved File # LR52592

Specify shunt lead resistance value if

in excess of 0.05 OHMS for calibration

purposes.

D.C. shunt rated ammeters have

thermistor circuit ambient temperature

compensation.

Separate shunt and shunt leads are

not included.

* Other scales are available

** Specify scale required.

*** Other mV ratings and scale

options available upon request.

**** Case types 077/078/079 use

10-32 UNF terminals. For M5

screw clamp terminals stipulate

case type 075.

D.C. Ammeters

Product Codes – Self Contained (Accuracy ±1%)****

41⁄2" Square Flange 83⁄4" Square Flange

Rating Scaling* Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

0-200µA 0-200µA •/+077-05AA-EAEA 078-05AJ-EAEA •079-05AA-EAEA

0-300µA 0-300µA •/+077-05AA-EEEE 078-05AJ-EEEE •079-05AA-EEEE

0-500µA 0-500µA •/+077-05AA-EMEM 078-05AJ-EMEM •079-05AA-EMEM

0-800µA 0-800µA •/+077-05AA-EWEW 078-05AJ-EWEW •079-05AA-EWEW

0-1mA 0-1mA •/+077-05AA-FAFA 078-05AJ-FAFA •079-05AA-FAFA

0-2mA 0-2mA •/+077-05AA-FGFG 078-05AJ-FGFG •079-05AA-FGFG

0-5mA 0-5mA •/+077-05AA-FXFX 078-05AJ-FXFX •079-05AA-FXFX

0-10mA 0-10mA •/+077-05AA-HAHA 078-05AJ-HAHA •079-05AA-HAHA

0-20mA 0-20mA •/+077-05AA-HFHF 078-05AJ-HFHF •079-05AA-HFHF

0-30mA 0-30mA •/+077-05AA-HMHM 078-05AJ-HMHM •079-05AA-HMHM

0-50mA 0-50mA •/+077-05AA-HXHY 078-05AJ-HXHY •079-05AA-HXHY

0-100mA 0-100mA •/+077-05AA-JRJR 078-05AJ-JRJR •079-05AA-JRJR

0-200mA 0-200mA •/+077-05AA-KAKA 078-05AJ-KAKA •079-05AA-KAKA

0-300mA 0-300mA •/+077-05AA-KGKG 078-05AJ-KGKG •079-05AA-KGKG

0-500mA 0-500mA •/+077-05AA-KMKM 078-05AJ-KMKM •079-05AA-KMKM

0-800mA 0-800mA •/+077-05AA-KWKW 078-05AJ-KWKW •079-05AA-KWKW

0-1A 0-1A •/+077-05AA-LALA 078-05AJ-LALA •079-05AA-LALA

0-5A 0-5A •/+077-05AA-LSLS 078-05AJ-LSLS •079-05AA-LSLS

0-10A 0-10A •/+077-05AA-MTMT 078-05AJ-MTMT •079-05AA-MTMT

0-15A 0-15A •/+077-05AA-NDND 078-05AJ-NDND •079-05AA-NDND

0-20A 0-20A •/+077-05AA-NGNG 078-05AJ-NGNG •079-05AA-NGNG

0-30A 0-30A •/+077-05AA-NLNL 078-05AJ-NLNL •079-05AA-NLNL

Product Codes – Milliammeters - Suppressed Zero, No zero set unless specified****

1/5mA To Suit •/+077-05RA-GM** 078-05RJ-GM** •079-05RA-GM**

4/20mA To Suit •/+077-05RA-HG** 078-05RJ-HG** •079-05RA-HG**

10/50mA To Suit •/+077-05RA-HZ** 078-05RJ-HZ** •079-05RA-HZ**

Product Codes – Shunt Rated (Accuracy ±1%)****

50mV (4mA)

To suit •/+077-05AA-EY** 078-05AJ-EY** 079-05AA-EY**

50-0-50mV

shunt •/+077-05CA-GB** 078-05CJ-GB** 079-05CA-GB**

100mV (4mA)

rating •/+077-05AA-GB** 078-05AJ-GB** 079-05AA-GB**

100-0-100mV

•/+077-05CA-GM** 078-05CJ-GM** 079-05CA-GM**

Product Codes – Zero Left For Use With 50mV Shunts And 0.05

Ohm Shunt Leads*** & ****

50mV 0-15A •/+077-05AA-EYND 078-05AJ-EYND 079-05AA-EYND

50mV 0-20A •/+077-05AA-EYNG 078-05AJ-EYNG 079-05AA-EYNG

50mV 0-30A •/+077-05AA-EYNL 078-05AJ-EYNL 079-05AA-EYNL

50mV 0-40A •/+077-05AA-EYNP 078-05AJ-EYNP 079-05AA-EYNP

50mV 0-75A •/+077-05AA-EYPB 078-05AJ-EYPB 079-05AA-EYPB

50mV 0-100A •/+077-05AA-EYPK 078-05AJ-EYPK 079-05AA-EYPK

50mV 0-150A •/+077-05AA-EYPZ 078-05AJ-EYPZ 079-05AA-EYPZ

50mV 0-200A •/+077-05AA-EYRL 078-05AJ-EYRL 079-05AA-EYRL

50mV 0-300A •/+077-05AA-EYRX 078-05AJ-EYRX 079-05AA-EYRX

50mV 0-400A •/+077-05AA-EYSC 078-05AJ-EYSC 079-05AA-EYSC

50mV 0-500A •/+077-05AA-EYSF 078-05AJ-EYSF 079-05AA-EYSF

50mV 0-750A •/+077-05AA-EYSM 078-05AJ-EYSM 079-05AA-EYSM

50mV 0-1000A •/+077-05AA-EYSS 078-05AJ-EYSS 079-05AA-EYSS

50mV 0-1200A •/+077-05AA-EYSU 078-05AJ-EYSU 079-05AA-EYSU

50mV 0-1500A •/+077-05AA-EYTC 078-05AJ-EYTC 079-05AA-EYTC

50mV 0-2000A •/+077-05AA-EYTM 078-05AJ-EYTM 079-05AA-EYTM

50mV 0-3000A •/+077-05AA-EYUA 078-05AJ-EYUA 079-05AA-EYUA

070 Series ANSI Switchboard Meters

D.C. Voltmeter

Frequency Meter

D.C. Voltmeters

Product Codes – Sensitivity 1000 ohms / Volt (Accuracy ±1%)***

41⁄2" Square Flange 83⁄4" Square Flange

Rating Scaling* Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

50mV to 800V

TO SUIT •/+077-05VA-** 078-05VJ-** 079-05VA-**

0-15V 0-15V •/+077-05VA-NDND 078-05VJ-NDND 079-05VA-NDND

0-30V 0-30V •/+077-05VA-NLNL 078-05VJ-NLNL 079-05VA-NLNL

0-50V 0-50V •/+077-05VA-NTNT 078-05VJ-NTNT 079-05VA-NTNT

0-75V 0-75V •/+077-05VA-PBPB 078-05VJ-PBPB 079-05VA-PBPB

0-150V 0-150V •/+077-05VA-PZPZ 078-05VJ-PZPZ 079-05VA-PZPZ

0-300V 0-300V •/+077-05VA-RXRX 078-05VJ-RXRX 079-05VA-RXRX

0-400V 0-400V •/+077-05VA-SCSC 078-05VJ-SCSC 079-05VA-SCSC

0-500V 0-500V •/+077-05VA-SFSF 078-05VJ-SFSF 079-05VA-SFSF

0-600V 0-600V •/+077-05VA-SJSJ 078-05VJ-SJSJ 079-05VA-SJSJ

0-750V 0-750V 077-05VA-SMSM 078-05VJ-SMSM 079-05VA-SMSM

0-800V 0-800V 077-05VA-SNSN 078-05VJ-SNSN 079-05VA-SNSN

Product Codes – Zero Centre - Sensitivity 2000 Ohms / Volt

(Accuracy ±1%)***

150-0-150V 150-0-150V

•/+077-05NA-RXRX 078-05NJ-RXRX 079-05NA-RXRX

300-0-300V 300-0-300V

•/+077-05NA-SJSJ 078-05NJ-SJSJ 079-05NA-SJSJ

500-0-500V 500-0-500V

•/+077-05NA-SSSS 078-05NJ-SSSS 079-05NA-SSSS

600-0-600V 600-0-600V

•/+077-05NA-SUSU 078-05NJ-SUSU 079-05NA-SUSU

Product Code – Suppressed Zero***

1 - 5V TO SUIT •/+077-05S-LM 078-05S-LM •079-05S-LM

Frequency Meters

Product Code –120V Self Contained***

41⁄2" Square Flange 83⁄4" Square Flange

Rating Scaling* Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

50Hz+/-0.15

45-55Hz •/+077-41LA-PNAG-AG 078-41LJ-PNAG-AG •079-41LA-PNAG-AG

50Hz+/-0.15

46-54Hz •/+077-41LA-PNAH-AH 078-41LJ-PNAH-AH •079-41LA-PNAH-AH

50Hz+/-0.25

45-65Hz •/+077-41LA-PNAJ-AJ 078-41LJ-PNAJ-AJ •079-41LA-PNAJ-AJ

60Hz+/-0.25

50-70Hz •/+077-41LA-PNAL-AL 078-41LJ-PNAL-AL •079-41LA-PNAL-AL

60Hz+/-0.15

55-65Hz •/+077-41LA-PNAN-AN 078-41LJ-PNAN-AN •079-41LA-PNAN-AN

60Hz+/-0.15

56-64Hz •/+077-41LA-PNAO-AO 078-41LJ-PNAO-AO •079-41LA-PNAO-AO

60Hz+/-0.08

58-62Hz •/+077-41LA-PNAT-AG 078-41LJ-PNAG-AG •079-41LA-PNAG-AG

400Hz+/-1.3 350-450Hz

•/+077-41LA-PNBH-BH 078-41LJ-PNBH-BH •079-41LA-PNBH-BH

400Hz+/-1.25

360-440Hz •/+077-41LA-PNBI-BI 078-41LJ-PNBI-BI •079-41LA-PNBI-BI

400Hz+/- 0.8

380-420Hz •/+077-41LA-PNBK-BK 078-41LJ-PNBK-BK 079-41LA-PNBK-BK

Alternative voltage rating 200-250V use code * Other scales are available

RN instead of PN ** Specify scale required

Alternative voltage rating 380-480V use code *** Case types 077/078/079 use 10-32

SE instead of PN

UNF terminals. For M5 screw clamp

• UL recognised File number E87815 terminals stipulate case type 075

070 Series ANSI Switchboard Meters

Thermal Maximum Demand Directly Heated Element Type

Indicates the maximum average ampere demand of a system. A red resettable slave

pointer is driven upscale by the indicating pointer to show maximum average value

of current since the previous setting. 41/2" square flange.

Specification

Burden: 3.5VA with limiting C.T., 2.5VA without limiting C.T.

Time lag: 15 minutes

Accuracy: 3% 50 or 60Hz

Product Codes

5/6A with 20% overload and internal limiting C.T. •077-16EU-LS**

5A - without overload, with internal limiting C.T. •077-16EU-LS**- NO

Thermal / Instantaneous Maximum Demand Ammeter (MDA)

Allows instantaneous values of current to be read independently of the thermal

indicator. This meter combines a thermal movement, with a rugged shortscale iron

vane indicator.

Specification

Burden: 4VA with limiting C.T., 3VA without limiting C.T.

Time Lag: 15 mins

Accuracy: 3% MDA, 2% Iron Vane 50 or 60Hz

Product Codes

Thermal / Instantaneous MDA

5/6A with 20% overload scale and internal limiting C.T. •077-16FU-LS**

5A - without 20% overload scale, with internal limiting C.T.

•077-16FU-LS** - NO

Dual Range - Thermal Instantaneous

3/6A - with 20% overload scale •077-16FU-LK**

2.5/5A - without 20% overload scale •077-16FU-LK** - NO

6/12A with 20% overload scale and internal limiting C.T.

•077-16FU-LV**

5/10A - without 20% overload scale with internal limiting C.T.

•077-16FU-LV** - NO

Instantaneous Maximum Demand Ammeter with Slave

Pointer

Designed to be compatible with other 41⁄2" switchboard meters. This instrument

enhances panel appearance and indicates maximum instantaneous values of load

current. The meter incorporates a longscale high torque taut band iron vane

movement to drive the red slave pointer.

Specification

Burden: 5VA, Accuracy -1% 50 or 60Hz

Product Code

5A - without overload scale 077-08DA-LS**

** Specify scale required

• UL recognised

A.C. Maximum Demand Ammeter

Thermal Instantaneous Maximum

Demand Ammeter

Instantaneous Maximum Demand

Ammeter

070 Series ANSI Switchboard Meters

A.C. Wattmeters & Varmeters

The Crompton 70 series of A.C. Wattmeters and Varmeters incorporate a DC moving

coil taut band indicator with the Crompton designed micro-circuit Watt transducer

PCB to read power on single phase or three phase systems. Varmeters can be

supplied with internal phase shifter or with external phase shifter if preferred. In the

interest of standardisation, preferred Wattmeter scale marking for common current

and voltage transformers are listed on the following pages. Instruments may be

supplied with zero left or center zero scales at the same list price.

Scaling

Since Wattmeter and Varmeter current circuits are frequently connected in series,

they should have equal current carrying capacity. This means that to assure equality

the sum of the left and right end-scale values of the Varmeters should be equal to or

greater than the full scale value of the Wattmeter (or the higher of the end-scale

values if center or offset zero). Instruments 10,000 kilowatts and over are marked in

megawatts. Center zero or offset zero Watt and Varmeters are marked “IN” for left

deflection and “OUT” for right deflection. Preferred scales may be calculated for

Wattmeters and varmeters not listed on the charts. Scale Watts must be one of the

standard full scale dial markings shown on the charts.

Calibration

For full load value of Watts or Vars, assuming unity power factor:

1ph 2 wire Watts = amps x volts

3ph 3 wire Watts = amps x line to line volts x √3

3ph 4 wire Watts = amps x line to neutral volts x 3

Minimum scale values are obtained by multiplying resultant Watts using above

formula x 0.7 and selecting next highest standard scale.

For maximum scale value multiply x 1.3 and select next lowest standard.

If scale calculates to an exact listed value use it rather than the next higher or

lower value.

Note: When ordering Wattmeters and Varmeters specify C.T. ratio, V.T. ratio and

required scale.

Specification

Burden per element: Current circuit: 2VA

Voltage circuit: 1VA

Accuracy Class: 1.0

Ambient range:

0° to +60°C, (32° to 140°F) standard calibration 20°C (68°F)

Ambient influence: 0.05% per 1°C maximum

Overloads-current: 10 x rating for 5 seconds., 1.2 x continuously

Voltage: 2 x rating for 5 seconds., 1.2 x continuously

Voltage influence: Accuracy maintained, 80-110% rated voltage

Power Factor influence: Accuracy maintained 0.1 lag to 0.1 lead

Enclosure code: 077: IP54 optional IP55

078: IP67

079: IP54 optional IP55

Response Time: 077,078: approximately 2.5 seconds

079: approximately 3.5 seconds

Dielectric test:

Live parts to case including panel 2600V RMS for 1 minute

070 Series ANSI Switchboard Meters

Wattmeter/Varmeter Scale Selector Guide

PRIMARY POTENTIAL 120 208 240 480 600 2400 3600 4200 4800 6000 7200 8400

TRANSFORMER VOLTAGE (1:1) (1.73:1) (2:1) (4:1) (5:1) (20:1) (30:1) (35:1) (40:1) (50:1) (60:1) (70:1)

SYSTEM VOLTAGE

3 PHASE 3 WIRE (L-L) 120 208 240 480 600 2400 3600 4200 4800 6000 7200 8400

SYSTEM VOLTAGE

3 PHASE 4 WIRE (L-N) 69 120 139 277 347 1390 2100 2400 2770 3500 4160 4800

CURRENT TRANSFORMER

RATIO NORMAL 5KW 10KW 10KW 20KW 25KW 100KW 150KW 175KW 200KW 250KW 300KW 350KW

25/5 MAX. 6 10 12 25 30 120 200 200 250 300 400 450

(5:1) MIN. 3 5 6 12.5 15 60 100 100 125 150 200 225

RATIO NORMAL 10KW 20KW 20KW 40KW 50KW 200KW 300KW 350KW 400KW 500KW 600KW 700KW

50/5 MAX. 12 20 25 50 60 250 400 450 500 600 800 900

(10:1) MIN. 6 10 12.5 25 30 125 200 250 250 300 400 450

RATIO NORMAL 15KW 25KW 30KW 60KW 75KW 300KW 500KW 500KW 600KW 750KW 900KW 1000KW

75/5 MAX. 20 30 40 80 100 400 600 700 800 1000 1200 1200

(15:1) MIN. 10 15 20 40 50 200 300 350 400 500 600 600

RATIO NORMAL 20KW 30KW 40KW 75KW 100KW 400KW 600KW 700KW 800KW 1000KW 1200KW 1200KW

100/5 MAX. 25 40 50 100 120 500 800 900 1000 1200 1500 1500

(20:1) MIN. 12.5 20 25 50 60 250 400 450 500 600 750 750

RATIO NORMAL 30KW 50KW 50KW 100KW 150KW 600KW 800KW 1000KW 1200KW 1500KW 1800KW 2000KW

150/5 MAX. 40 70 75 150 200 800 1200 1200 1500 2000 2400 2500

(30:1) MIN. 20 35 35 75 100 400 600 600 750 1000 1000 1250

RATIO NORMAL 40KW 75KW 75KW 150KW 200KW 800KW 1200KW 1200KW 1500KW 2000KW 2500KW 3000KW

200/5 MAX. 50 80 100 200 250 1000 1500 1500 2000 2500 3000 3500

(40:1) MIN. 25 40 50 100 125 500 750 750 1000 1250 1500 1500

RATIO NORMAL 70KW 100KW 100KW 200KW 300KW 1200KW 1500KW 2000KW 2500KW 3000KW 3500KW 4500KW

300/5 MAX. 75 120 150 300 400 1500 2000 2500 3000 4000 4000 5000

(60:1) MIN. 35 60 75 150 200 750 1000 1250 1500 2000 2000 2500

RATIO NORMAL 75KW 125KW 150KW 300KW 400KW 1500KW 2500KW 3000KW 3000KW 4000KW 5000KW 6000KW

400/5 MAX. 100 150 200 400 500 2000 3000 3600 4000 5000 6000 7000

(80:1) MIN. 50 75 100 200 250 1000 1500 1500 2000 2500 3000 3500

RATIO NORMAL 125KW 200KW 200KW 450KW 600KW 2000KW 3000KW 4000KW 5000KW 6000KW 7500KW 8000KW

600/5 MAX. 150 250 300 600 800 3000 4000 5000 6000 8000 8000 10MW

(120:1) MIN. 75 125 150 300 400 1500 2000 2500 3000 4000 4000 5000KW

RATIO NORMAL 150KW 250KW 300KW 600KW 800KW 3000KW 5000KW 6000KW 6000KW 8000KW 10MW 12MW

800/5 MAX. 200 350 400 800 1000 4000 6000 7500 8000 10MW 12 15

(160:1) MIN. 100 175 200 400 500 2000 3000 3000 40000 5000KW 6000KW 7500KW

RATIO NORMAL 200KW 350KW 400KW 800KW 1000KW 4000KW 6000KW 6000KW 8000KW 10MW 12MW 15MW

1000/5 MAX. 250 450 500 1000 1200 5000 8000 8000 10MW 12 15 18

(200:1) MIN. 125 225 250 500 600 2500 4000 4000 5000KW 6000KW 7500KW 10

RATIO NORMAL 250KW 400KW 500KW 1000KW 1200KW 5000KW 7000KW 8000KW 10MW 12MW 15MW 10MW

1200/5 MAX. 300 500 600 1200 1500 6000 8000 10MW 12 15 18 20

(240:1) MIN. 150 250 300 600 750 3000 4000 5000KW 6000KW 7500KW 10 10

RATIO NORMAL 300KW 500KW 600KW 1200KW 1500KW 6000KW 10MW 10MW 12MW 15MW 20MW 20MW

1500/5 MAX. 400 700 750 1500 2000 8000 12 12 15 20 20 25

(300:1) MIN. 200 350 375 1000 1000 4000 6000KW 6000KW 7500KW 10 10 12.5

RATIO NORMAL 400KW 750KW 800KW 1600KW 2000KW 8000KW 12MW 12MW 15MW 20MW 25MW 30MW

2000/5 MAX. 500 800 1000 2000 2500 10MW 15 15 20 25 30 35

(400:1) MIN. 250 400 500 750 1250 5000 7500KW 7500KW 10 12.5 15 20

RATIO NORMAL 750KW 1000KW 1200KW 2000KW 3000KW 12MW 18MW 20MW 25MW 30MW 35MW 40MW

3000/5 MAX. 800 1200 1500 3000 4000 15 20 25 30 40 40 50

(600:1) MIN. 400 600 750 1500 2000 7500KW 10 12.5 15 20 20 25

RATIO NORMAL 800KW 1200KW 1500KW 3000KW 4000KW 15MW 20MW 25MW 30MW 40MW 50MW 50MW

4000/5 MAX. 1000 1500 2000 4000 5000 20 30 30 40 50 60 75

(800:1) MIN. 500 750 1000 2000 2500 10 15 15 20 25 30 40

RATIO NORMAL 1000KW 1500KW 2000KW 4000KW 5000KW 20MW 30MW 20MW 40MW 50MW 60MW 75MW

5000/5 MAX. 1250 2000 2500 5000 6000 25 40 25 50 60 80 80

(1000:1) MIN. 500 1000 1250 2500 3000 12.5 20 12.5 25 30 40 40

RATIO NORMAL 1200KW 2000KW 2500KW 5000KW 6000KW 25MW 35MW 40MW 50MW 60MW 60MW 80MW

6000/5 MAX. 1500 2500 3000 3000 8000 30 40 50 60 80 80 100

(1200:1) MIN. 750 1250 1500 1500 4000 15 20 25 30 40 40 50

070 Series ANSI Switchboard Meters

Wattmeter/Varmeter Scale Selector Guide

PRIMARY POTENTIAL 12KV 14.4KV 24KV 34.5KV 38KV 46KV 92KV 115KV 138KV 345KV 765KV

TRANSFORMER VOLTAGE

(100:1) (120:1) (200:1) (300:1) (330:1) (400:1) (800:1) (1000:1) (1200:1) (3000:1) (6000:1)

SYSTEM VOLTAGE

3 PHASE 3 WIRE (L-L) 12KV 14.4KV 24KV 34.5KV 38KV 46KV 92KV 115KV 138KV 345KV 765KV

SYSTEM VOLTAGE

3 PHASE 4 WIRE (L-N) 6900 8300 13.8KV 20KV 22KV 26.5KV 53KV 66KV 80KV 200KV 440KV

CURRENT TRANSFORMER

RATIO NORMAL 500KW 600KW 1000KW 1500KW 1500KW 1500KW 3000KW 5000KW 6000KW 15MW 30MW

25/5 MAX. 650 800 1200 1500 2000 2500 200 200 250 300 400

(5:1) MIN. 325 400 600 750 1000 1250 100 100 125 150 200

RATIO NORMAL 1000KW 1200KW 2000KW 3000KW 3000KW 3500KW 8000KW 10MW 12MW 30MW 60MW

50/5 MAX. 1200 1500 2500 3500 4000 5000 10MW 12 15 35 80

(10:1) MIN. 600 750 1250 1750 2000 2500 5000KW 6000KW 7500KW 15 40

RATIO NORMAL 1500KW 1800KW 3000KW 4000KW 5000KW 5000KW 10MW 15MW 15MW 45MW 100MW

75/5 MAX. 2000 2000 4000 5000 6000 7500 15 15 20 50 125

(15:1) MIN. 1000 1000 2000 2500 3000 3000 7500KW 7500KW 10 25 50

RATIO NORMAL 2000KW 2500KW 4000KW 6000KW 6000KW 7500KW 15MW 20MW 25MW 60MW 125MW

100/5 MAX. 2500 3000 5000 7500 8000 10MW 20 25 30 70 150

(20:1) MIN. 1250 1500 2500 3000 4000 5000KW 10 12.5 15 35 75

RATIO NORMAL 3000KW 3500KW 6000KW 10MW 10MW 10MW 20MW 30MW 35MW 90MW 200MW

150/5 MAX. 4000 4000 4000 10 12 15 30 35 40 100 250

(30:1) MIN. 2000 2000 2000 5000KW 6000KW 7500KW 15 15 20 50 100

RATIO NORMAL 4000KW 4500KW 8000KW 12MW 12MW 15MW 30MW 35MW 50MW 100MW 250MW

200/5 MAX. 5000 6000 5000 15 15 20 40 50 60 150 300

(40:1) MIN. 2500 3000 2500 7500KW 7500KW 10 20 25 30 75 150

RATIO NORMAL 6000KW 7000KW 12MW 18MW 18MW 20MW 45MW 60MW 75MW 150MW 400MW

300/5 MAX. 8000 8000 15 20 25 30 60 75 80 200 500

(60:1) MIN. 4000 4000 7.5 10 12.5 15 30 30 40 100 250

RATIO NORMAL 8000KW 10MW 15MW 24MW 25MW 30MW 60MW 80MW 100MW 200MW 500MW

400/5 MAX. 10MW 12 20 30 30 40 80 100 120 300 600

(80:1) MIN. 5000KW 6000KW 10 15 15 20 40 50 60 150 300

RATIO NORMAL 12MW 15MW 25MW 35MW 40MW 45MW 90MW 100MW 150MW 350MW 800KW

600/5 MAX. 15 18 30 40 50 60 120 150 180 450 1000

(120:1) MIN. 7500KW 10 15 20 25 30 60 75 75 225 500

RATIO NORMAL 15MW 20MW 30MW 50MW 50MW 60MW 120MW 150MW 200MW 500MW 1000MW

800/5 MAX. 20 25 40 60 60 80 150 200 200 600 1200

(160:1) MIN. 10 12.5 20 30 30 40 75 100 100 300 600

RATIO NORMAL 20MW 25MW 40MW 50MW 60MW 75MW 150MW 200MW 250MW 600MW 1200MW

1000/5 MAX. 25 30 50 60 80 100 200 250 300 750 1500

(200:1) MIN. 12.5 15 25 30 40 50 100 125 150 300 750

RATIO NORMAL 25MW 30MW 50MW 60MW 80MW 100MW 175MW 250MW 300MW 750MW 1500MW

1200/5 MAX. 30 35 60 80 100 120 200 300 350 900 2000

(240:1) MIN. 15 20 30 40 50 60 100 150 175 450 1000

RATIO NORMAL 30MW 35MW 60MW 75MW 100MW 120MW 250MW 3000MW 350MW 900MW 2000MW

1500/5 MAX. 40 40 80 100 120 150 300 350 450 1000 2500

(300:1) MIN. 20 20 40 50 60 75 150 175 225 500 1250

RATIO NORMAL 40MW 50MW 80MW 100MW 120MW 150MW 300MW 400MW 5000MW 1000MW 2500MW

2000/5 MAX. 50 60 100 150 150 200 400 500 600 1500 3000

(400:1) MIN. 25 30 50 75 75 100 200 250 300 750 1500

RATIO NORMAL 60MW 75MW 100MW 150MW 200MW 200MW 400MW 600MW 700MW 1500MW 3500MW

3000/5 MAX. 80 80 150 200 250 300 500 750 900 2000 5000

(600:1) MIN. 40 40 75 100 125 150 250 350 450 1000 2500

RATIO NORMAL 80MW 100MW 150MW 200MW 250MW 300MW 5000MW 800MW 1000MW 2000MW 500MW

4000/5 MAX. 100 125 200 300 300 400 800 1000 1200 3000 6000

(800:1) MIN. 50 60 100 150 150 200 400 500 600 1500 3000

RATIO NORMAL 100MW 125MW 200MW 250MW 300MW 4000MW 750MW 1000MW 1200MW 3000MW 6000MW

5000/5 MAX. 120 150 250 300 400 500 1000 1200 1500 3500 8000

(1000:1) MIN. 60 75 125 150 200 250 500 600 750 1750 400

RATIO NORMAL 120MW 150MW 250MW 350KW 400MW 450MW 1000MW 1200MW 1500MW 3500MW 8000MW

6000/5 MAX. 150 175 300 400 500 600 1200 1500 1750 4000 10000

(1200:1) MIN. 75 80 150 200 250 300 600 750 800 2000 5000

070 Series ANSI Switchboard Meters

A.C. Wattmeter

A.C. Varmeter

A.C. Wattmeters

Product Codes – 1 element, transformer rated. 50/60Hz.

Taut Band. Integral transducer. Accuracy 1.0%. 50/60Hz

Measured 41⁄2" Square Flange 83⁄4" Square Flange

System Scales Standard Case Sealed Case Standard Case

Catalogue No. Hi-Shock Catalogue No.

Catalogue No.

1 2 5 120V TO SUIT •/+077-215A-QQ** 078-215J-QQ** •079-215A-QQ**

1 2 5 240V TO SUIT 077-215A-QS** 078-215J-QS** 079-215A-QS**

For connection diagram please see Fig. 21 page 60.

Product Codes – 2 element, transformer rated. 50/60Hz.

Taut Band. Integral transducer. Accuracy 1.0%. 50/60Hz

3 3 5 120V TO SUIT •/+077-218A-QQ** 078-218J-QQ** •079-218A-QQ**

3 3 5 208V TO SUIT •/+077-218A-QR** 078-218J-QR** •079-218A-QR**

3 3 5 240V TO SUIT •/+077-218A-QS** 078-218J-QS** 079-218A-QS**

3 3 5 380V TO SUIT •/+077-218A-QX** 078-218J-QX** 079-218A-QX**

3 3 5 480V TO SUIT •/+077-218A-QT** 078-218J-QT** 079-218A-QT**

For connection diagram please see Fig. 25 page 60.

Product Codes – 21⁄2 element, transformer rated. 50/60Hz.

Taut Band. Integral transducer. Accuracy 1.0%. 50/60Hz

3 4 5 69V TO SUIT •/+077-219A-QL** 078-219J-QL** •079-219A-QL**

3 4 5 120V TO SUIT •/+077-219A-QQ** 078-219J-QQ** •079-219A-QQ**

3 4 5 277V TO SUIT 077-219A-QY** 078-219J-QY** 079-219A-QY**

3 4 5 346V TO SUIT 077-219A-QZ** 078-219J-QZ** 079-219A-QZ**

For connection diagram please see Fig. 28 page 60.

Product Codes – Phase Shifting Transformers

For use with above Wattmeters, when VAr measurement with external phase shifter is required.

3 3 120V 855-956A-PR 855-956J-PR 855-956A-PR

3 4 120V 855-957A-PR 855-957J-PR 855-957A-PR

3 4 69V 855-957A-NZ 855-957J-NZ 855-957A-NZ

A.C. Varmeters

Product Codes – 2 element, transformer rated. 50/60Hz.

Taut Band. Integral transducer. Accuracy 1.0%. 50/60Hz

3 3 5 120V TO SUIT •/+077-31LA-QQ** 078-31LJ-QQ**

3 3 5 208V TO SUIT

•/+077-31LA-QR**-C6

078-31LJ-QR**

3 3 5 240V TO SUIT 077-31LA-QS** 078-31LJ-QS**

3 3 5 380V TO SUIT 077-31LA-QX** 078-31LJ-QX**

3 3 5 480V TO SUIT 077-31LA-QT** 078-31LJ-QT**

For connection diagram please see Fig. 32 page 61.

Product Codes – 21⁄2 element, transformer rated. 50/60Hz.

Taut Band. Integral transducer. Accuracy 1.0%.50/60Hz

3 4 5 120V TO SUIT •/+077-31UA-QQ** 078-31UJ-QQ** •079-31UA-QQ**

3 4 5 208V TO SUIT 077-31UA-QR** 078-31UJ-QR** •079-31UA-QR**

3 4 5 480V TO SUIT 077-31UA-QT** 078-31UJ-QT** 079-31UA-QT**

For connection diagram please see Fig. 32 page 61.

• UL recognised File # E87815 + CSA Approved File # LR52592

** Specify C.T. (Current Transformer) and V.T. (Voltage Transformer) ratios if used, and

preferred scale at time of ordering.

Phases

Wires

Amperes

1 VA max. Burden

Volts

1 VA max. Burden

070 Series ANSI Switchboard Meters

RTD Temperature Meter

RTD Temperature Meters*

Product Codes – Accuracy 1.0% of span.

Self-contained for 10 Ohm copper or 100 Ohm platinum RTD. (Resistance

Temperature Detector) - Specify copper or platinum at time of ordering.

41⁄2" Square Flange

Rating Scaling* Standard Case Sealed Case Hi-Shock

Catalogue No. Catalogue No.

110/130V 20-140°C 077-45RA-**QF-PQ 078-45RJ-**QF-PQ

50/60Hz

110/130V 0-150°C 077-45RA-**QE-PQ 078-45RJ-**QE-PQ

50/60Hz

110/130V 0-200°C 077-45RA-**QG-PQ 078-45RJ-**QG-PQ

50/60Hz

For connection diagrams please see Fig. 17 page 59.

Thermocouple Temperature Meters

Product Code – Accuracy 1% of span.

Suitable for type J and K. Cold junction compensation and thermocouple break indication is

provided. Specifiy type J or K and temperature at time of ordering.

41⁄2" Square Flange

Rating Standard Case Catalogue No.

110/130V 077-45TA-••PM

50/60Hz

For connection diagrams please see Fig. 18 page 59.

Tap Position Indicator

Product Code

To show transformer tap, hoist or valve position using 3 wire system for 1-18 tap positions

using 400 Ohm steps.

41⁄2" Square Flange 83⁄4" Square Flange

Rating Scaling* Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

110/220/240V

1-18 taps 077-45P- Not available Not available

50/60Hz

For connection diagrams please see Fig. 20 page60.

Select nearest higher rated voltmeter and specify requirement

• UL recognised File # E87815 * Other ranges available upon

•• JT for type J, KT for type K thermocouple request - Consult Factory.

** RI for 10 ohm Copper or R2 for

100ohm platinum.

*** Specify input and scale

070 Series ANSI Switchboard Meters

Elapsed Time Meters

Product Codes – 99,999.99 hours, non reset. Burden 2.5VA. 50

or 60Hz

Synchronous motor running time meter with a running indicator.

41⁄2" Square Flange 83⁄4" Square Flange

Rating Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

110/130V 50Hz •077-155A-PNZH-C5 078-155J-PNZH-C5 Not available

200/250V 50Hz •077-155A-RNZH-C5 078-155J-RNZH-C5 Not available

480V 50Hz

•077-155A-SEZH-C5 078-155J-SEZH-C5 Not available

110/130V 60Hz •077-156A-PNZH-C6 078-156J-PNZH-C6 Not available

200/250V 60Hz •077-156A-RNZH-C6 078-156J-RNZH-C6 Not available

480V 60Hz •077-156A-SEZH-C6 078-156J-SEZH-C6 Not available

12/24/40/110V D.C. 077-151A-

A.C. Phase Sequence, Phase Failure Indicators

Product Codes – Neon Bulb Type. Burden 2.5VA

2 neon bulbs for phase sequence indication - first marked correct 1-2-3, second

marked incorrect 3-2-1. 3 neon bulbs for phase failure indication - first marked 1,

second marked 2, third marked 3.

41⁄2" Square Flange 83⁄4" Square Flange

Rating Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

100/150V 50/60Hz 077-12PA-P2C6 Not available Not available

151/300V 50/60Hz 077-12PA-P3C6 Not available Not available

301/500V 50/60Hz 077-12PA-P4C6 Not available Not available

For connection diagrams please see Fig. 1 page 58.

D.C. Indicators for Tachometer Generators

Product Code

41⁄2" Square Flange 83⁄4" Square Flange

Rating Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

D.C. Volts 077-052A-*** 078-052J-*** 079-052A-***

Select nearest higher rated voltmeter and specify requirement

• UL recognised File # E87815 * Other ranges available upon

•• JT for type J, KT for type K thermocouple request - Consult Factory.

** RI for 10 ohm or R2 to 100ohm

platinum.

*** Specify input and scale

Elapsed Time Meter

A.C. Phase Sequence and Phase Failure

Indicator

070 Series ANSI Switchboard Meters

A.C. Power Factor Meter

Specification

Ratings, self-contained: Current windings 5 amperes.

Voltage windings minimum 50 volts, maximum 600 volts

Accuracy Class: 1.0

Overshoot: 33%

External Temperature 0.5% fid max.

Influence:

External Field Influence: 3% fid max.

Frequency Range: 50Hz or 60Hz standard, 25-3000Hz optional (Specify)

Frequency Influence: Single phase instruments, 59 to 61Hz 1.0% fid max.

Polyphase instruments ±10% deviation from 69Hz: 1.0%

Overload capacity: Current coils 1000% momentarily, 100% for 15 minutes

and 25% indefinitely.

Voltage circuits 25% indefinitely.

Burdens: Each current circuit, 1.5VA approx

Each voltage circuit 1VA approx

Measuring systems 077-427 - 3 or 4 wire

Ranges available: Lag 0.5-1 - 0.5 lead power factor

Lag 0.2-1 - 0.8 lead power factor

JIS dimension product available on request. Instruments may be used on loads

down to 20% of current rating and between 90% and 110% of voltage rating.

Product Codes – Balanced Load Accuracy ±1%

Measured 41⁄2" Square Flange 83⁄4" Square Flange

System Scales Standard Case Sealed Case Standard Case

Catalogue No. Hi-Shock Catalogue No.

Catalogue No.

1 2 5 120V 0.5-1-0.5 •/+077-425A-QQAD 078-425J-QQAD •079-425A-QQAD

1 2 5 240V 0.5-1-0.5 •/+077-425A-QSAD 078-427J-QSAD •079-427A-QSAD

3 3⁄4 5 120V 0.5-1-0.5 •/+077-427A-QQAD 078-427J-QQAD •079-427A-QAAD

3 3⁄4 5 208V 0.5-1-0.5 •/+077-427A-QRAD 078-427J-QRAD •079-427A-QRAD

3 3⁄4 5 240V 0.5-1-0.5 •/+077-427A-QSAD 078-427J-QSAD •079-427A-QSAD

3 3⁄4 5 480V 0.5-1-0.5 077-427A-QTAD 078-427J-QTAD 079-427A-QTAD

For connection diagrams please see Fig. 13 & 15 page 59.

Product Codes – Unbalanced Load Accuracy ±1%

Measured 41⁄2" Square Flange 83⁄4" Square Flange

System Scales Standard Case Sealed Case Standard Case

Catalogue No. Hi-Shock Catalogue No.

Catalogue No.

3 3 5 120V 0.5-1-0.5 077-TFUA-QQAD – –

3 3 5 240V 0.5-1-0.5 077-TFUA-QSAD – –

For connection diagrams please see Fig. 12 page 59.

• UL Recognised File # E87815 + CSA Approved File # LR52592

A.C. Power Factor Meter

Phases

Wires

Amperes

2 VA max. Burden

Volts

1 VA max. Burden

Phases

Wires

Amperes

2 VA max. Burden

Volts

1 VA max. Burden

070 Series ANSI Switchboard Meters

360° Power Factor

Specification

Ratings, self-contained: Current windings minimum, 0.5 amps, maximum

20 amps. Voltage windings min. 50 volts, maximum

240 volts, for higher voltages up to 480 volts an

external box is supplied.

Normal Operating Position

: On vertical panel unless otherwise specified at the time

of order.

Position Influence: Not more than 1% of scale length for up to 60° tilt from

normal operating position

Accuracy Class: 1.0

Overshoot: 33%

External Temp. Influence: 0.5% fid. max.

External Field Influence: 3% fid. max

Frequency Influence: Single phase instruments from 59 to 61Hz 1% max.

fid. max. Polyphase instrument ±10% deviation from

60Hz: 1% fid. max.

Overload Capacity: Current coils 1000% momentarily, 100% for 15 minutes,

and 50% indefinitely.

Voltage circuits 50% indefinitely.

Characteristics 077-132 077-136

AV AV

Impedance ohms: 0.162 3380 0.043 3380

Resistance ohms: 0.147 3300 0.04 3300

Resistance ohms: 0.082 750 0.016 750

Watts: 3.5 1.39 1.0 1.30

Volt-Amperes: 4.05 1.42 1.07 1.42

Reactive VA: 2.03 0.281 0.4 0.281

Power Factor: 0.86 0.96 0.93 0.98

Product Codes – Rotary Power Factor - 360°

3 3⁄4 5 120V 0-1-0 077-136A-QQAB 078-136J-QQAB 079-136A-QQAB

3 3⁄4 5 208V 0-1-0 077-136A-QRAB 078-136J-QRAB 079-136A-QRAB

3 3 5 120V 0-1-0 077-132A-QQAB 078-132J-QSAB 079-132A-QSAB

3 3 5 208V 0-1-0 077-132A-QRAB 078-132J-QTAB 079-132A-QTAB

For connection diagrams please see Fig. 4, 6 & 7 page 58.

Rotating iron 360° products are only suitable for use on 50 and 60 Hz systems.

3 Phase 4 Wire Power Factor Meters Model -136 unbalanced load, -132

are connected L-L ie. balanced load

120V L-N system will be rated at 208V L-L. • UL Recognised File # E87815

+ CSA Approved File # LR52592

360° Power Factor Meter

070 Series ANSI Switchboard Meters

360° Rotary Synchroscope

Specification

Rating, self-contained: 120V A.C.

Frequency rating: 50 or 60Hz (specify), 400Hz optional

Normal Operating Position:

On vertical panel unless otherwise specified at time

of order

Position Influence: Not more than 3.6 mechanical degrees deviation for up

to 60° tilt from normal operating position.

Accuracy: 2 degrees

Overshoot: 33% maximum

Response time: 3 seconds maximum for 180° deflection

Sensitivity at synchronism: 3 electrical degrees maximum

External field influence: 3% maximum in 5 oersted field

Pull in frequency: 58Hz

Drop-out frequency: 57Hz

Dielectric test: Live parts to case, including panel: 2600V RMS

for 1 minute.

Between running and 1500V RMS for 1 minute

incoming circuits:

Overload capacity: 50% indefinitely

Characteristics Incoming circuit Running circuit

Impedance ohms: 4670 5335

Resistance ohms: 4020 5240

Resistance ohms: 2380 1058

Reactive Volt amps: 1.57 0.535

Volt-amps: 3.08 2.7

Power factor: 0.86 0.98

Watts: 2.66 2.65

Product Codes – Pivot and Jewel

41⁄2" Square Flange 83⁄4" Square Flange

Rating Scaling* Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

120V 50Hz

SLOW FAST

•/+077-145A-PRAE-C5 078-145J-PRAE-C5 •079-145A-PRAE-C5

120V 60Hz

SLOW FAST

•/+077-146A-PRAE-C6 078-146J-PRAE-C6 •079-146A-PRAE-C6

120V 400Hz

SLOW FAST

077-144A-PRAE-C4 078-144J-PRAE-C4 079-144A-PRAE-C4

For connection diagrams please see Fig. 10 page 59.

Alternate voltage of 240V, use code RR • UL Recognised File # E87815

instead of PR. + CSA Approved File # LR52592

360° Rotary Synchroscope

070 Series ANSI Switchboard Meters

360° A.C. LED Synchroscope

Specification

Voltage: 120, 240, 480 Volts A.C. or via P.T.

Frequency: 40/65Hz

Burden @ 60Hz: 4VA maximum

Suitable for single or three phase systems

Safety: IEC1010-1(300V A.C. rms installation degree 2)

Dielectric: 4kV rms for 1 minute

Isolation: BUS/GEN/RELAY

Vibration: To Lloyds shipping specification

Product Codes

41⁄2" Square Flange

Rating Scaling Standard Case

Catalogue No.

120V 40/65Hz SLOW FAST 077-14AU-PQYY-FQ

240V 40/65Hz SLOW FAST 077-14AU-RRYY-FQ

480V 40/65Hz SLOW FAST 077-14AU-SEYY-FQ

For connection diagrams please see Fig. 8 page 58.

A.C. Synchrocheck Relay and LED 360° Synchroscope

Specification

Voltage: 110/120V (115V nominal)

220/240V (230V nominal)

380/480V (430V nominal)

Phase Difference: +0 to 20° ±1°

Voltage Difference: +0 to 20% ±2%

Time Delay: 0 to 2.5 seconds +10%

Product Codes

41⁄2" Square Flange

Rating Scaling Standard Case

Catalogue No.

Live Bus

110/120V 40/65Hz SLOW FAST 077-14GU-POYY-FQ

220/240V 40/65Hz SLOW FAST 077-14GU-RSYY-FQ

380/480V 40/65Hz SLOW FAST 077-14GU-SZYY-FQ

Dead Bus

110/120V 40/65Hz SLOW FAST 077-14HU-POYY-FQ

220/240V 40/65Hz SLOW FAST 077-14HU-RSYY-FQ

380/480V 40/65Hz SLOW FAST 077-14HU-SZYY-FQ

Live Bus

120V 40/65Hz SLOW FAST 077-14LU-PQYY-FQ

240V 40/65Hz SLOW FAST 077-14LU-RRYY-FQ

480V 40/65Hz SLOW FAST 077-14LU-SEYY-FQ

Dead Bus

120V 40/65Hz SLOW FAST 077-14DU-PQYY-FQ

240V 40/65Hz SLOW FAST 077-14DU-RRYY-FQ

480V 40/65Hz SLOW FAST 077-14DU-SEYY-FQ

For connection diagrams please see Fig. 9 page 58.

In the 0.77-14G and 0.77-14H models, the generator voltage is free to track the bus

voltage (+ the voltage difference preset) over the input voltage range. In the 077-

14L and 077-14D models, the generator voltage is to match the nominal input (bus)

voltage specified (within the voltage difference preset).

360° A.C. LED Synchroscope

A.C. Synchrocheck Relay

& LED 360° Synchroscope

070 Series ANSI Switchboard Meters

D.C. Transducer Indicators

Product Codes

41⁄2" Square Flange 83⁄4" Square Flange

Rating Scaling* Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

WATTS 1mA TO SUIT •/+077-055A-FA** 078-055J-FA** •079-055A-FA**

VARS 1mA TO SUIT •/+077-056A-FA** 078-056J-FA** •079-056A-FA**

FREQUENCY 1mA TO SUIT •/+077-053A-FA** 078-053J-FA** •079-053A-FA**

POWER FACTOR 1mA

TO SUIT •/+077-054A-FA** 078-054J-FA** •079-054A-FA**

A.C. AMPS 1mA TO SUIT •/+077-05AA-FA** 078-05AJ-FA** •079-05AA-FA**

A.C. VOLTS 1mA TO SUIT •/+077-05VA-LT** 078-05VJ-LT** •079-05VA-LT**

SPEED 1mA TO SUIT •/+077-052A-FA** 078-052J-FA** •079-052A-FA**

VA 1mA TO SUIT •/+077-057A-FA** 078-057J-FA** •079-057A-FA**

For use with the following transducers:- * Case types 077/078/079 use 10-32

Watts, VArs, Frequency, Power Factor,

UNF terminals. For M5 screw clamp

A.C. Amperes, A.C. Volts & Temperature terminals stipulate case type 075

** Specify scale. Input: 1mA D.C. for

4/20mA change “FA” to “HG”

A.C. Watt & Watt Hour Meters

Moving coil indication gives instantaneous reading of Watts. Self Contained circuitry

drives an impulse counter to give Watt hour indication.

Product Codes – Transducer Driven Accuracy ±1%.

With internal linear integrator and six digit impulse counter. Externally powered.

41⁄2" Square Flange 83⁄4" Square Flange

Rating Scaling Standard Case Sealed Case Hi-Shock Standard Case

Catalogue No. Catalogue No. Catalogue No.

120V, 240V

1mA TO SUIT 077-KHAU-FA** 078-KHAJ-FA** Not available

50/60Hz 4-20mA 077-KHAU-HG** 078-KHAJ-HG**

For connection diagrams please see Fig. 19 page 59.

Product Codes – Self Contained - Accuracy instantaneous 1%.

Kilowatt hour 0.5% of pulse rate/hour.

Single element. Transformer rated 50/60Hz. Hi-Q Taut Band. Integral transducer.

Measured 41⁄2" Square Flange 83⁄4" Square Flange

System Scales Standard Case Sealed Case Standard Case

Catalogue No. Hi-Shock Catalogue No.

Catalogue No.

1 2 5 120 TO SUIT 077-KHBU-QQ** 078-KHBJ-QQ** Not available

For connection diagrams please see Fig. 21 page 60.

2 element. Transformer rated. 50/60Hz. Hi-Q Taut Band. Integral transducer.

3 3 5 120 TO SUIT 077-KHEU-QQ** 078-KHEJ-QQ** Not available

3 3 5 208 TO SUIT 077-KHEU-QR** 078-KHEJ-QR** Not available

For connection diagrams please see Fig. 25 page 60.

21⁄2Element.Transformer rated. 50/60Hz. Hi-Q Taut Band. Integral transducer.

3 4 5 69 TO SUIT 077-KHGU-QL** 078-KHGJ-QL** Not available

3 4 5 120 TO SUIT 077-KHGU-QQ** 078-KHGJ-QQ** Not available

3 4 5 277 TO SUIT 077-KHGU-QY** 078-KHGJ-QY** Not available

For connection diagrams please see Fig. 28 page 60.

** Specify pulse rate and external power supply • UL Recognised File # E87815

+ CSA Approved File # LR52592

D.C. Transducer Indicator

A.C. Watt/Watt Hour Meter

Phases

Wires

Amperes

2VA max. Burden

Volts

1 VA max. Burden

070 Series ANSI Switchboard Meters

LED Digital / Analogue Combination

The Crompton model 077-DI features a combination of the traditional 250° 41⁄2"

switchboard indicator with the benefits of wide angle visibility plus trend indication.

This rugged shock and vibration resistant taut band design provides precision

accuracy and instantaneous reading via the bright in dial mounted 31⁄2digit

LED display.

Description

Model 077-DI digital analogue indicators are ideal for all applications where moving

pointer instruments are preferable to indicate trend while simultaneously displaying

a high visibility precision LED readout for increased user interface.

Packaged in a weather resistant case, the 077-DI is interchangeable with other

analogue and digital instruments designed to directly mount in to a standard ANSI-

C39. 41⁄2" switchboard cut-out.

Available in side, center, or off-set zero versions the 077-DI can accept A.C. Current,

Voltage, Frequency, Watts, VArs and Phase Angle or D.C.Current and Voltage direct

inputs as well as a wide range of transducer outputs making it suitable for a variety

of other applications including low-load current, temperature, speed,

watt/vars,percent and level.

Specification

Inputs:

D.C. Voltage: 20mV-600V (1MΩinput impedance as standard)

D.C. Current: 1mA-1A, 4 to 20mA (Voltage drop 200mV nominal).

External shunt operation (50mV and 100mV).

A.C. Voltage: 200mV-600V (1 kΩ/ volt)

A.C. Current: 1mA-999mA (Using internal shunt,

voltage drop 200mV nominal). 1A, 2A, 5A & 10A using

internal current transformer.

Common mode rejection: =>80dB @ 50/60Hz

Overload: Voltage: x 1.2 continuous. x1.5 for 10 seconds.

Current using internal CT: x 1.2 continuous.

x 10 for 10 seconds.

External Power Requirement:

Standard: 120 & 240V ±15%.

Optional: 480V ±15% A.C. 40 to 60Hz

Burden: 3VA @ 60Hz

D.C.: Standard: 12, 24, 48,110 & 125V ±15%

Display Analogue: Long scale moving coil. 250° deflection. Scale

length 6.8inches. Response time less than 2.5 seconds.

Display Options: Center or offset zero. Scale plate in colors other than

white. Colored lines or segments on scale.

Slower response time.

Digital Display: 31⁄2digit red LED. 7 segment (7.6mm, 0.3" high).

Right hand decimal points. Polarity indication:

positive / none. Negative / horizontal bar “ - ”.

Update time (standard): 1 per second

Accuracy – Analogue: D.C & A.C: ±1% of FSD (calibrated at 25°C)

Accuracy – Digital: DC: ±0.05% of reading ±1 count ±100ppm of

reading / °C. (Maximum).

A.C. current: 0-1 Amp ±0.1% reading ±3 counts

±150ppm of reading / °C.

A.C. current: 0-10 amps ±0.1% reading ±10 counts

±150ppm of reading / °C (maximum)

A.C. Voltage: ±0.1% of reading ±3 counts ±150ppm of

reading / °C. (maximum)

Zero ±1 count ±0.2 counts/°C (maximum) D.C. offset

scale only Warm up time: 1 minute

Long Term Stability: ±2 counts

Calibration Check: Recommended 12 monthly intervals

Enclosure Code: IP54 (Optional IP55 using panel gasket)

Operational Temperature: 0 to +60°C (32° to 140°F).

Storage Temperature: -20 to +60°C (-4° to 140°F)

Humidity: Up to 90% relative @ 55°C. Tests to BS2011 part 2DA.

Isolation Test Voltage: 2kV RMS 60Hz for 1 minute

Interference Rejection: To IEEE STD472, ANSI C37 90A,

SEN 361503, IEC 255-4

Approvals: EMC and LVD

UL recognised file E140758

Features

Rugged shock and vibration taut band

design

High accuracy LED display

Wide selection of AC and DC inputs

Maximum trend indication visibility

Input isolation

External decimal point selection option

Interchangeable with 41⁄2" switchboard

meters

Benefits

Cost effective

Meets all the requirements of

ANSI-C39.1 (1981)

IP54 (NEMA 3) protection.

Optional IP55 (NEMA 4) gasket

Bump, shock and vibration proof

Customised options and features

Applications

Switchgear

Distribution systems

Generator sets

Control panels

Energy management

Building management

Utility power monitoring

Process control

Motor control

Approvals

UL recognised File No: E140758

070 Series ANSI Switchboard Meters

LED Digital/Analogue Combination

Product Codes – A.C. Voltmeters - direct reading (40/2000Hz)***

Digital accuracy ±0.1% ±3 counts analogue accuracy ±1%.

Rating Scaling* Catalogue No.

200mV 0-200mV 077-DIWA-KAKA-C6-**

250mV 0-250mV 077-DIWA-KDKD-C6-**

500mV 0-500mV 077-DIWA-KMKM-C6-**

1V 0-1V 077-DIWA-LALA-C6-**

5V 0-5V 077-DIWA-LSLS-C6-**

10V 0-10V 077-DIWA-MTMT-C6-**

15V 0-15V 077-DIWA-NDND-C6-**

30V 0-30V 077-DIWA-NLNL-C6-**

150V 0-150V 077-DIWA-PZPZ-C6-**

250V 0-250V 077-DIWA-RSRS-C6-**

300V 0-300V 077-DIWA-RXRX-C6-**

500V 0-500V 077-DIWA-SFSF-C6-**

600V 0-600V 077-DIWA-SJSJ-C6-**

For connection diagrams please see Fig. 45 page 62.

Product Codes – A.C. Voltmeters Transformer Rated (40/2000Hz)***

Rating Scaling* Catalogue No.

150V 0-300V 077-DIWA-PZRX-C6-**

150V 0-600V 077-DIWA-PZSJ-C6-**

150V 0-750V 077-DIWA-PZSM-C6-**

150V 0-3000V 077-DIWA-PZUA-C6-**

143V 0-5000V 077-DIWA-PTUJ-C6-**

150V 0-5250V 077-DIWA-PZUL-C6-**

150V 0-6000V 077-DIWA-PZUP-C6-**

150V 0-9000V 077-DIWA-PZUY-C6-**

150V 0-15KV 077-DIWA-PZWC-C6-**

150V 0-18KV 077-DIWA-PZWD-C6-**

150V 0-45KV 077-DIWA-PZWJ-C6-**

150V 0-60KV 077-DIWA-PZWL-C6-**

For connection diagrams please see Fig. 45 page 62.

Product Codes – A.C. Ammeters - direct reading (40/2000Hz)***

Rating Scaling* Catalogue No.

1A 0-1A 077-DIBA-LALA-C6-**

1.5A 0-1.5A 077-DIBA-LCLC-C6-**

2A 0-2A 077-DIBA-LELE-C6-**

3A 0-3A 077-DIBA-LJLJ-C6-**

5A 0-5A 077-DIBA-LSLS-C6-**

8A 0-8A 077-DIBA-MJMJ-C6-**

10A 0-10A 077-DIBA-MTMT-C6-**

For connection diagrams please see Fig. 45 page 62.

Product Codes – Power Supply

MU - 12 Volts D.C. PQ - 120 Volts A.C.

Z2 - 130 Volts D.C. PR - 120 Volts D.C.

BD - 24 Volts D.C. RR - 240 Volts A.C.

PO - 115 Volts A.C. PS - 125 Volts D.C.

NR - 48 Volts D.C.

* Other scalings available.

** Specify power supply voltage, for the code, see Power Supply Codes table.

*** Case types 077/078/079 use 10-32 UNF terminals.

For M5 screw clamp terminals stipulate case type 075

A.C. Voltmeter

A.C. Ammeter

070 Series ANSI Switchboard Meters

LED Digital/Analogue Combination

Product Codes – A.C. Ammeters Transformer Rated (40/2000Hz)

Digital accuracy ±0.1% ±1 counts analogue accuracy ±1%.

Rating Scaling* Catalogue No.

5A 0-10A 077-DIBA-LSMT-C6-**

5A 0-15A 077-DIBA-LSND-C6-**

5A 0-20A 077-DIBA-LSNG-C6-**

5A 0-25A 077-DIBA-LSNJ-C6-**

5A 0-30A 077-DIBA-LSNL-C6-**

5A 0-40A 077-DIBA-LSNP-C6-**

5A 0-50A 077-DIBA-LSNT-C6-**

5A 0-60A 077-DIBA-LSNW-C6-**

5A 0-75A 077-DIBA-LSPB-C6-**

5A 0-80A 077-DIBA-LSPD-C6-**

5A 0-100A 077-DIBA-LSPK-C6-**

5A 0-150A 077-DIBA-LSPZ-C6-**

5A 0-200A 077-DIBA-LSRL-C6-**

5A 0-250A 077-DIBA-LSRS-C6-**

5A 0-300A 077-DIBA-LSRX-C6-**

5A 0-400A 077-DIBA-LSSC-C6-**

5A 0-500A 077-DIBA-LSSF-C6-**

5A 0-600A 077-DIBA-LSSJ-C6-**

5A 0-750A 077-DIBA-LSSM-C6-**

5A 0-800A 077-DIBA-LSSN-C6-**

5A 0-1000A 077-DIBA-LSSS-C6-**

5A 0-1200A 077-DIBA-LSSU-C6-**

5A 0-1500A 077-DIBA-LSTC-C6-**

5A 0-1600A 077-DIBA-LSTE-C6-**

For connection diagrams please see Fig. 45 page 62.

Product Codes – A.C. Frequency Meters

Self contained 110/130• Volts rating. Moving Coil Indicator Integral transducer

Centre Accuracy Scaling* Catalogue No.

Frequency

50Hz ±0.15 45-55Hz 077-DZLA-PNAG-AG

50Hz ±0.15 46-54Hz 077-DZLA-PNAH-AH

55Hz ±0.25 45-65Hz 077-DZLA-PNAJ-AJ

60Hz ±0.25 50-70Hz 077-DZLA-PNAL-AL

60Hz ±0.15 55-65Hz 077-DZLA-PNAN-AN

60Hz ±0.15 56-64Hz 077-DZLA-PNAO-AO

60Hz ±0.08 58-62Hz 077-DZLA-PNAT-AT

400Hz ±1.3 350-450Hz 077-DZLA-PNBH-BH

400Hz ±1.25 360-440Hz 077-DZLA-PNBI-BI

400Hz ±0.08 380-420Hz 077-DZLA-PNBK-BK

For connection diagrams please see Fig. 44 page 62.

Product Codes – Power Supply

MU - 12 Volts D.C. PQ - 120 Volts A.C.

Z2 - 130 Volts D.C. PR - 120 Volts D.C.

BD - 24 Volts D.C. RR - 240 Volts A.C.

PO - 115 Volts A.C. PS - 125 Volts D.C.

NR - 48 Volts D.C.

• Alternative voltage rating 200/250V specify RN instead of PN

• Alternative voltage rating 380/480V specify SE instead of PN

* Other scales are available.

** Specify power supply voltage, for the code, see Power Supply Codes table.

A.C. Ammeter

A.C. Frequency Meter

070 Series ANSI Switchboard Meters

LED Digital/Analogue Combination

Product Codes – D.C. Voltmeters - Direct Reading

Digital accuracy ±0.5% ±1 counts analogue accuracy ±1%.

Rating Scaling* Catalogue No.

200mV 0-200mV 077-DIVA-KAKA-**

250mV 0-250mV 077-DIVA-KDKD-**

500mV 0-500mV 077-DIVA-KMKM-**

1V 0-1V 077-DIVA-LALA-**

5V 0-5V 077-DIVA-LSLS-**

10V 0-10V 077-DIVA-MTMT-**

15V 0-15V 077-DIVA-NDND-**

30V 0-30V 077-DIVA-NLNL-**

50V 0-50V 077-DIVA-NTNT-**

75V 0-75V 077-DIVA-PBPB-**

80V 0-80V 077-DIVA-PDPD-**

150V 0-150V 077-DIVA-PZPZ-**

300V 0-300V 077-DIVA-RXRX-**

400V 0-400V 077-DIVA-SCSC-**

500V 0-500V 077-DIVA-SFSF-**

600V 0-600V 077-DIVA-SJSJ-**

150-0-150V 150-0-150V 077-DINA-RXRX-**

300-0-300V 300-0-300V 077-DINA-SJSJ-**

600-0-600V 600-0-600V 077-DINA-SUSU-**

For connection diagrams please see Fig. 45 page 62.

Product Codes – Transducer Indicators***

For use with the following transducers: Catalogue No.

Watts, VArs, Frequency, Power Factor, A.C. Amperes 077-DITA-****-**

A.C. Volts, Temperature

For connection diagrams please see Fig. 45 page 62.

Product Codes – Indicators for Tachometer Generators

Rating Scaling* Catalogue No.

A.C. or D.C. FPM or RPM 077-DI2A-****-**

For connection diagrams please see Fig. 45 page 62.

Product Codes – Power Supply

MU - 12 Volts D.C. PQ - 120 Volts A.C.

Z2 - 130 Volts D.C. PR - 120 Volts D.C.

BD - 24 Volts D.C. RR - 240 Volts A.C.

PO - 115 Volts A.C. PS - 125 Volts D.C.

NR - 48 Volts D.C.

* Other scales are available.

** Specify power supply voltage, for the code, see Power Supply Codes table.

*** Case types 077/078/079 use 10-32 UNF terminals.

For M5 screw clamp terminals stipulate case type 075

**** Specify input and scaling

D.C. Voltmeter

Transducer Indicator

070 Series ANSI Switchboard Meters

LED Digital/Analogue Combination

Product Codes – D.C. Ammeters - Shunt Rated

Digital accuracy ±0.5% ±1 counts analogue accuracy ±1%.

Rating Scaling* Catalogue No.

50mV-4mA Scaled to 077-DIAA-EY

50-0-50mV-2-0-2mA suit 077-DICA-GB

100-0-100mV standard 077-DICA-GM

100-0-100mV-2-0-2mA shunt ratings 077-DICA-FM

For connection diagrams please see Fig. 45 page 62.

Product Codes – D.C. Ammeters - Suppressed Zero

Digital accuracy ±0.5% ±1 counts analogue accuracy ±1%

Rating Scaling* Catalogue No.

1-5mA To suit 077-DIAA-GM

4-20mA requirements 077-DIAA-HG

10-50mA 077-DIAA-HZ

For connection diagrams please see Fig. 45 page 62.

Product Codes – D.C. Ammeters – Direct Reading

Digital accuracy ±0.5% ±1 counts analogue accuracy ±1%.

Rating Scaling* Catalogue No.

1mA 0-1mA 077-DIAA-FAFA-**

2mA 0-2mA 077-DIAA-FGFG-**

5mA 0-5mA 077-DIAA-FXFY-**

10mA 0-10mA 077-DIAA-GZGZ-**

20mA 0-20mA 077-DIAA-HFHF-**

30mA 0-30mA 077-DIAA-HMHM-**

50mA 0-50mA 077-DIAA-HYHY-**

100mA 0-100mA 077-DIAA-JRJR-**

200mA 0-200mA 077-DIAA-KAKA-**

300mA 0-300mA 077-DIAA-KGKG-**

500mA 0-500mA 077-DIAA-KMKM-**

800mA 0-800mA 077-DIAA-KWKW-**

1A 0-1A 077-DIAA-LALA-**

For connection diagrams please see Fig. 45 page 62.

Product Codes – Power Supply

MU - 12 Volts D.C. PQ - 120 Volts A.C.

Z2 - 130 Volts D.C. PR - 120 Volts D.C.

BD - 24 Volts D.C. RR - 240 Volts A.C.

PO - 115 Volts A.C. PS - 125 Volts D.C.

NR - 48 Volts D.C.

* Other scales are available.

** Specify power supply voltage, for the code, see Power Supply Codes table.

D.C. Ammeter

070 Series ANSI Switchboard Meters

A.C. Wattmeter

A.C. Varmeter

Power Factor/Phase Angle Meter

LED Digital/Analogue Combination

Product Codes – A.C. Wattmeters. Accuracy ±1%. Single Phase

50/60Hz

Measured

System

41⁄

" Square Flange

Scales Standard Case

Catalogue No.

1 2 5A 120V TO SUIT 077-DW5A-QQ**-C6

1 2 5A 240V TO SUIT 077-DW5A-QS**-C6

For connection diagrams please see Fig. 37 page 61.

Product Codes – A.C. Wattmeters. 2 Element, Transformer Rated.

50/60Hz. Integral Transducer. Accuracy 1.0%

3 3 5A 120V TO SUIT 077-DW8A-QQ**-C6

3 3 5A 208V TO SUIT 077-DW8A-QR**-C6

For connection diagrams please see Fig. 38 page 62.

Product Codes – A.C. Wattmeters. 3 Element, Transformer Rated.

50/60Hz. Integral Transducer.

3 4 5A 69V TO SUIT 077-DW9A-QL**-C6

3 4 5A 120V TO SUIT 077-DW9A-QQ**-C6

For connection diagrams please see Fig. 39 page 62.

Product Codes – A.C. Varmeters. 2 Element Transformer Rated

50/60Hz. Integral Transducer.

3 3 5A 120V TO SUIT 077-DXLA-QQ**-C6

3 3 5A 208V TO SUIT 077-DXLA-QR**-C6

For connection diagrams please see Fig. 40 page 62.

Product Codes – A.C. Varmeters. 21⁄2Element, Transformer Rated.

50/60Hz. Hi-Q Taut Band. Integral Transducer. Accuracy 1.0%.

3 4 5A 120V TO SUIT 077-DXUA-QQ**-C6

3 4 5A 208V TO SUIT 077-DXUA-QR**-C6

For connection diagrams please see Fig. 41 page 62.

Product Codes – Power Factor & Phase Angle Meters.

Accuracy 1.0% (Balanced Loads). Self Contained. 60Hz.

Integral Transducer.

1 2 5A 120V 0.5-1-0.5 LAG/LEAD & 60/0/60 DEG 077-DP5A-QQAD-C6

1 2 5A 240V 0.5-1-0.5 LAG/LEAD & 60/0/60 DEG 077-DP5A-QSAD-C6

3 3⁄4 5A 120V 0.5-1-0.5 LAG/LEAD & 60/0/60 DEG 077-DP7A-QQAD-C6

3 3⁄4 5A 208V 0.5-1-0.5 LAG/LEAD & 60/0/60 DEG 077-DP7A-QRAD-C6

3 3⁄4 5A 240V 0.5-1-0.5 LAG/LEAD & 60/0/60 DEG 077-DP7A-QSAD-C6

3 3⁄4 5A 480V 0.5-1-0.5 LAG/LEAD & 60/0/60 DEG 077-DP7A-QTAD-C6

For connection diagrams please see Fig. 42 & 43 page 62.

** Specify C.T. (Current Transformer) and V.T. (Voltage Transformer) ratios if

used, and preferred scale at time of ordering.

Phases

Wires

Amperes

1 VA max. Burden

Volts

1 VA max. Burden

070 Series ANSI Switchboard Meters

LED Digital/Analogue Combination

Scale – Options

Options Option Code

1. Blank, uncalibrated dial (zero and full scale marks in pencil). SA

2. Red or coloured line or mark (specify position). SR

3. Coloured zones or segments (specify limits and color(s). SZ

4. Non-standard caption (other than listed below). SD

5. Black dial with white figures and pointer. SB

6. Customer/user logo imprinted on dial. SM

7. Finely divided scale. -

8. Standard rating, single unlisted scale -

Calibration – Options

Options Option Code

10. Zero-center scale. Not available for A.C. ammeters & voltmeters

11. Offset-zero scale wattmeters, varmeters, DC ammeters

& voltmeters. -

12. Calibration to customer specification including special caption.

13. Calibration at other than vertical, specify required angle

from vertical. CM

14. Non-listed ratings. -

15. Temperature calibration, other than 23°C ambient. CT

16. a) Calibration at 400Hz. C4

b) Calibration to other specific frequencies between 25 and 500Hz.

17. Potentiometer, externally mounted ±10% range adjustment.

18. Suppressed zero other than listed. D.C. only. RA

19. Heavily damped movement. PD

Construction – Options

Options Option Code

20. Anti-glare window. BR

21. Internal illumination Specify 6, 12, 24 or 36V D.C. EL

22. Neoprene panel gasket. MG

23. Red manual set pointer. ER

25. Coloured bezel. FA

26. Hermetically sealed case.

070 Series ANSI Switchboard Meters

Fig. 1 Model 077-12P

Phase Sequence Indicator 3 phase 3

or 4 wire systems.

Fig. 2 Model 077-137

360° Dynamometer Power Factor

Indicator Single Phase.

Fig. 3 Model 077-131

360° deg Dynamometer Power Factor

Indicator 3 Phase 3 or 4 Wire Balanced

Load (3 Currents 1 Voltage).

Fig. 6 Models 077-136, 077-136A,

078-136J

360° Dynamometer Power factor

Indicator 3 Phase 3 or 4 Wire

Unbalanced Load.

Fig. 5 Model 078-132B

360° Dynamometer Power factor

Indicator Indicator 3 Phase 3 or 4 Wire

Balanced Load (1 Current 3 Voltages).

Fig. 4 Models 077-132, 078-132J

360° Dynamometer Power Factor

Indicator 3 Phase 3 or 4 Wire Balanced

Load (1 Current 3 Voltages).

Fig. 7 Model 078-136B

360° Dynamometer Power factor

Indicator 3 Phase 3 or 4 Wire

Unbalanced Load.

Fig. 8 Models 077-14A

360° LED Synchroscope.

Fig. 9 Models 077-14D, 077-14G,

077-14H, 077-14L

360° LED Synchroscope and Synchro

Check relay.

Connection Diagrams

070 Series ANSI Switchboard Meters

Fig. 10 Models 077-144, 077-145

077-146, 077-147, 078-144J, 078-145J

078-146J, 078-147J, 079-144, 079-145

079-146

360 Degree Dynamometer Synchroscope.

Fig. 11 Models 078-144B, 078-145B

078-146B, 078-147B

360 Degree Dynamometer Synchroscope.

Fig. 12 Model 077-TFU

Power Factor Meter 3 Phase 3 Wire

Unbalanced Load.

Fig. 15 Models 075-427, 077-427

078-427J, 079-427

Electronic Phase Angle Meter 3 phase 3

or 4 wire Balanced Load.

Fig. 14 Model 078-425B

Electronic Phase Angle Meter Single

Phase.

Fig. 13 Models 077-425, 078-425J

079-425

Electronic Phase Angle Meter Single

Phase.

Fig. 16 Model 078-427B

Electronic Phase Angle Meter 3 phase 3

or 4 wire Balanced Load.

Fig. 17 Models 077-45R, 078-45R

Temperature Indicator for Resistance

Temperature Detector (RTD).

Fig. 18 Model 077-45T

Temperature Indicator for Thermocouple

Detector.

Connection Diagrams

Fig. 19 Models 077-KHA, 078-KHA

AC Kilowatts/Kilowatthours (Transducer)

Indicator.

070 Series ANSI Switchboard Meters

Fig. 20 Model 077-45P

Tap Position Indicator.

Fig. 21 Models 077-215, 077-KHB

078-215J, 078-KHBJ, 079-215

Wattmeter Single Phase.

Fig. 22 Model 078-215B, 078-KHBB

Wattmeter Single Phase.

Fig. 25 Models 077-218, 077-KHE

078-218J, 078-KHEJ, 079-218

Wattmeter 3 Phase 3 Wire Unbalanced

Load.

Fig. 24 Model 078-216B

Wattmeter 3 Phase 3 Wire Balanced

Load.

Fig. 23 Models 077-216, 078-216J

Wattmeter 3 Phase 3 Wire Balanced

Load.

Fig. 26 Models 078-218B, 078-KHEB

Wattmeter 3 Phase 3 Wire Unbalanced

Load.

Fig. 27 Model 077-21D

Wattmeter 3 Phase 4 Wire Balanced

Load.

Fig. 28 Models 077-219, 077-KHG

078-219J, 078-KHGJ, 079-219

Wattmeter 3 Phase 4 Wire Unbalanced

Load.

Connection Diagrams

070 Series ANSI Switchboard Meters

Fig. 29 Models 078-219B, 078-KHGB

Wattmeter 3 Phase 4 Wire Unbalanced

Load.

Fig. 30 Models 077-21B

Wattmeter 3 Phase 3 Wire Balanced

Load 2 Reverse Connected CTs.

Fig. 31 Model 077-21F

Wattmeter 3 Phase 4 Wire Unbalanced

Load Delta Connected CTs.

Fig. 34 Model 077-319

Varmeter 3 Phase 4 Wire Unbalanced

Load.

Fig. 33 Models 077-315

Varmeter 3 Phase 3 or 4 Wire Balanced

Load.

Fig. 32 Models 077-31L, 078-31LJ

Varmeter 3 Phase 3 Wire Unbalanced

Load.

Fig. 35 Models 077-31U, 077-KXG

078-31U, 079-31U

Varmeter 3 Phase 4 Wire Unbalanced

Load.

Fig. 36 Model 077-31F

Varmeter 3 Phase 4 Wire Unbalanced

Load Delta Connected CTs.

Fig. 37 Model 077-DW5

LED Digital/Analogue Wattmeter Single

Phase.

Connection Diagrams

070 Series ANSI Switchboard Meters

Fig. 38 Model 077-DW8

LED Digital/Analogue Wattmeter 3 Phase

3 Wire Unbalanced Load.

Fig. 39 Model 077-DW9

LED Digital/Analogue Wattmeter 3 Phase

4 Wire Unbalanced Load.

Fig. 40 Model 077-DXL

LED Digital/Analogue Varmeter 3 Phase 3

Wire Unbalanced Load.

Fig. 43 Model 077-DP7

LED Digital/Analogue Phase Angle Meter

3 Phase 3 or 4 Wire Balanced Load.

Fig. 42 Model 077-DP5

LED Digital/Analogue Phase Angle Meter

Single Phase.

Fig. 41 Model 077-DXU

LED Digital/Analogue Varmeter 3 Phase

4 Wire Unbalanced Load.

Fig. 44 Model 077-DZL

LED Digital/Analogue Frequency Meter.

Fig. 45 Models 077-DI2, 077-DIA

077-DIB, 077-DIC, 077-DIN, 077-DIT

077-DIV, 077-DIW

LED Digital/Analogue Meter.

Fig. 46 Models 077-DA2, 077-DAA

077-DAB, 077-DAK, 077-DAT

077-DAV, 077-DAW

LCD Digital/Analogue Meter.

Connection Diagrams