09/2008
31
RSB
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
HIGH PERFORMANCES - HIGH TEMPERATURE
D.C. AND PULSE APPLICATIONS
STACKED VERSION
Typical applications: blocking, coupling, decoupling for a
signal from DC to high frequency; pulse, logic and timing
circuit, lamp capacitor for electronic compact lamps, inverter
for LCD monitors, automotive DC motor suppression.
PRODUCT CODE: RSB p = 5mm
PRODUCT CODE SYSTEM
The part number, comprising 14 digits, is formed as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14
R S B C -
Digit 1 to 3 Series code.
Digit 4 d.c. rated voltage:
C = 50V D = 63V E = 100V I = 250V
M = 400V W = 500V P = 630V
Digit 5 Pitch: C = 5 mm
Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table1)
Digit 12 Identies the dimensions and electrical
characteristics.
Digit 13 Internal use
Digit 14 Capacitance tolerance:
J=5%; K=10%; M=20%.
Table 1 (for more detailed information, please refer to page 14).
Standard
packaging style
Lead length Ordering code
(mm) (Digit 10 to 11)
AMMO-PACK DQ
Reel Ø 355 mm CK
Loose, short leads 4 +1.5 AA
Loose, long leads 17+1/-2 Z3
GENERAL TECHNICAL DATA
Dielectric: polyester lm (polyethylene terephthalate).
Plates: aluminium layer deposited by evaporation under
vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame
retardant according to UL94.
Marking: Series (RSB) capacitance, tolerance, D.C. rated
voltage.
Climatic category: 55/125/56 IEC 60068-1
Operating temperature range: -55 to +125°C
Related documents: IEC 60384-2
single sided metallized
polyester lm
Winding scheme
Loose Taped
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
5.0 <4.5 B +0.1 H +0.1 L +0.2
5.0 ≥4.5 B +0.1 H +0.1 L +0.3
All dimensions are in mm.
Not for new design. Use new F622 Series.
09/2008 32
RSB
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
HIGH PERFORMANCES - HIGH TEMPERATURE
D.C. AND PULSE APPLICATIONS
STACKED VERSION
p = 5 mm
PRODUCT CODE: RSB
Rated
Cap.
50Vdc/30Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/µs)
2.2µF 6.0 11.0 7.2 5.0 200 20 E3 RSBCC4220--1--
Rated
Cap.
63Vdc/40Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/µs)
0.10 µF 2.5 6.5 7.2 5.0 250 31.5 E3 RSBDC3100--0--
0.15 µF 2.5 6.5 7.2 5.0 250 31.5 E3 RSBDC3150--0--
0.22 µF 2.5 6.5 7.2 5.0 250 31.5 E3 RSBDC3220--1--
0.33 µF 3.5 7.5 7.2 5.0 250 31.5 E3 RSBDC3330--0--
0.47 µF 3.5 7.5 7.2 5.0 250 31.5 E3 RSBDC3470--1--
0.68 µF 4.5 9.5 7.2 5.0 250 31.5 E3 RSBDC3680--1--
1.0 µF 5.0 10.0 7.2 5.0 250 31.5 E3 RSBDC4100--1--
1.5 µF 6.0 11.0 7.2 5.0 250 31.5 E3 RSBDC4150--1--
Rated
Cap.
100Vdc/63Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/ µs)
4700 pF 2.5 6.5 7.2 5.0 300 60 E3 RSBEC1470--0--
6800 pF 2.5 6.5 7.2 5.0 300 60 E3 RSBEC1680--0--
0.010 µF 2.5 6.5 7.2 5.0 300 60 E3 RSBEC2100--0--
0.015 µF 2.5 6.5 7.2 5.0 300 60 E3 RSBEC2150--0--
0.022 µF 2.5 6.5 7.2 5.0 300 60 E3 RSBEC2220--0--
0.033 µF 2.5 6.5 7.2 5.0 300 60 E3RSBEC2330--0--
0.047 µF 2.5 6.5 7.2 5.0 300 60 E3 RSBEC2470--0--
0.068 µF 2.5 6.5 7.2 5.0 300 60 E3RSBEC2680--1--
0.10 µF 3.5 7.5 7.2 5.0 300 60 E3 RSBEC3100--0--
0.15 µF 4.5 9.5 7.2 5.0 300 60 E3RSBEC3150--0--
0.22 µF 5.0 10.0 7.2 5.0 300 60 E3 RSBEC3220--0--
0.33 µF 6.0 11.0 7.2 5.0 300 60 E3RSBEC3330--0--
0.47 µF 6.0 11.0 7.2 5.0 300 60 E3 RSBEC3470--1--
Rated
Cap.
400Vdc/200Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/ µs)
1000 pF 2.5 6.5 7.2 5.0 600 48 E4 RSBMC1100--0--
1500 pF 2.5 6.5 7.2 5.0 600 48 E4 RSBMC1150--0--
2200 pF 2.5 6.5 7.2 5.0 600 48 E4 RSBMC1220--0--
3300 pF 2.5 6.5 7.2 5.0 600 48 E4 RSBMC1330--0--
4700 pF 2.5 6.5 7.2 5.0 600 48 E4RSBMC1470--0--
6800 pF 3.5 7.5 7.2 5.0 600 48 E4 RSBMC1680--0--
0.010 µF 3.5 7.5 7.2 5.0 600 48 E4RSBMC2100--0--
0.015 µF 3.5 7.5 7.2 5.0 600 48 E4 RSBMC2150--0--
0.022 µF 4.5 9.5 7.2 5.0 600 48 E4RSBMC2220--0--
0.033 µF 5.0 10.0 7.2 5.0 600 48 E4 RSBMC2330--0--
0.047 µF 6.0 11.0 7.2 5.0 600 48 E4RSBMC2470--0--
Rated
Cap.
500Vdc/220Vac*
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/ µs)
1000 pF 2.5 6.5 7.2 5.0 700 70 E4 RSBWC1100--0--
1500 pF 2.5 6.5 7.2 5.0 700 70 E4RSBWC1150--0--
2200 pF 3.5 7.5 7.2 5.0 700 70 E4 RSBWC1220--0--
3300 pF 3.5 7.5 7.2 5.0 700 70 E4RSBWC1330--0--
4700 pF 3.5 7.5 7.2 5.0 700 70 E4 RSBWC1470--0--
6800 pF 4.5 9.5 7.2 5.0 700 70 E4RSBWC1680--0--
0.010 µF 5.0 10.0 7.2 5.0 700 70 E4 RSBWC2100--0--
0.015 µF 6.0 11.0 7.2 5.0 700 70 E4RSBWC2150--0--
Rated
Cap.
630Vdc/220Vac*
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/ µs)
1000 pF 2.5 6.5 7.2 5.0 800 100 E4 RSBPC1100--0--
1500 pF 3.5 7.5 7.2 5.0 800 100 E4 RSBPC1150--0--
2200 pF 3.5 7.5 7.2 5.0 800 100 E4 RSBPC1220--0--
3300 pF 4.5 9.5 7.2 5.0 800 100 E4 RSBPC1330--0--
4700 pF 4.5 9.5 7.2 5.0 800 100 E4 RSBPC1470--0--
6800 pF 5.0 10.0 7.2 5.0 800 100 E4 RSBPC1680--0--
0.010 µF 6.0 11.0 7.2 5.0 800 100 E4 RSBPC2100--0--
All dimensions are in mm.
Note 1: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table.
Note 2: The rated voltages from 250Vdc to 630Vdc are for pulse applications (i.e.: lamp capacitors).
*Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145).
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Rated
Cap.
250Vdc/160Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/ µs)
1000 pF 2.5 6.5 7.2 5.0 400 20 E4RSBIC1100--0--
1500 pF 2.5 6.5 7.2 5.0 400 20 E4 RSBIC1150--0--
2200 pF 2.5 6.5 7.2 5.0 400 20 E4RSBIC1220--0--
3300 pF 2.5 6.5 7.2 5.0 400 20 E4 RSBIC1330--0--
4700 pF 2.5 6.5 7.2 5.0 400 20 E4RSBIC1470--0--
6800 pF 2.5 6.5 7.2 5.0 400 20 E4 RSBIC1680--0--
0.010 µF 2.5 6.5 7.2 5.0 400 20 E4RSBIC2100--0--
0.015 µF 2.5 6.5 7.2 5.0 400 20 E4 RSBIC2150--0--
0.022 µF 3.5 7.5 7.2 5.0 400 20 E4RSBIC2220--0--
0.033 µF 3.5 7.5 7.2 5.0 400 20 E4 RSBIC2330--0--
0.047 µF 4.5 9.5 7.2 5.0 400 20 E4RSBIC2470--0--
0.068 µF 4.5 9.5 7.2 5.0 400 20 E4 RSBIC2680--0--
0.10 µF 5.0 10.0 7.2 5.0 400 20 E4RSBIC3100--0--
0.15 µF 6.0 11.0 7.2 5.0 400 20 E4 RSBIC3150--0--
Not for new design. Use new F622 Series.
09/2008
33
RSB
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
HIGH PERFORMANCES - HIGH TEMPERATURE
D.C. AND PULSE APPLICATIONS
STACKED VERSION
p = 5 mm
PRODUCT CODE: RSB
ELECTRICAL CHARACTERISTICS
Rated voltage (VR):
50 Vdc 63 Vdc 100 Vdc
250 Vdc 400 Vdc 500 Vdc
630 Vdc
Rated temperature (TR): +85 °C
Temperature derated voltage:
for temperatures between +85°C and +125°C a decreasing
factor of 1.25% per degree °C on the rated voltage VR (d.c.
and a.c.) has to be applied.
Capacitance range: 1000pF to 2.2µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±5% (J); ±10% (K); ±20% (M).
Total self-inductance (L): ≈7nH
max 1 nH per 1 mm lead and capacitor length.
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C
kHz C ≤ 0.1µF C > 0.1µF
1
10
100
≤ 80
≤ 120
≤ 250
≤ 80
≤ 120
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge:
50 Vdc for VR <100 Vdc
100 Vdc for VR ≥100 Vdc
Performance
For VR ≤100 Vdc
≥ 15000 MΩ for C ≤ 0.33µF
≥ 5000 s for C > 0.33µF and ≤1µF
≥ 1000 s for C > 1µF
For VR >100 Vdc
≥ 30000 MΩ
Test voltage between terminations:
1.6xVR applied for 2 s at +25°C±5°C.
Electrical characteristics for use as lamp capacitors
in lighting applications.
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤ 5%
DF change (∆tgd): ≤ 50x10-4 at 1kHz
Insulation resistance: ≥ 50% of initial limit.
Endurance:
Test conditions
Temperature: +125°C ±2°C
Test duration: 2000 h
Voltage applied: 1.25xVC
Performance
Capacitance change |∆C/C|: ≤ 5%
DF change (∆tgδ): ≤ 30x10-4 at 10kHz for C≤ 1µF
≤ 20x10-4 at 1kHz for C> 1µF
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s ±1 s
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤ 30x10-4 at 10kHz for C≤ 1µF
≤ 20x10-4 at 1kHz for C> 1µF
Insulation resistance: ≥ initial limit.
Long term stability (after two years):
Storage: standard environmental conditions (see page 12).
Performance
Capacitance change |∆C/C|: ≤ 3% for C≤ 0.1µF
≤ 2% for C> 0.1µF
RELIABILITY:
Reference MIL HDB 217
Application conditions:
Temperature: +40°C ±2°C
Voltage: 0.5xVR
Failure rate: ≤ 1 FIT
(1 FIT = 1x10-9 failures/components x h)
Failure criteria:
(according to DIN 44122)
Short or open circuit
Capacitance change |∆C/C|: > 10%
DF change (∆tgδ): > 2 x initial limit.
Insulation resistance: < 0.005 x initial limit.
Not for new design. Use new F622 Series.
09/2008 34
RSB
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
HIGH PERFORMANCES - HIGH TEMPERATURE
D.C. AND PULSE APPLICATIONS
STACKED VERSION
p = 5 mm
PRODUCT CODE: RSB
MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 85°C)
Note: p (pitch) in mm.
Not for new design. Use new F622 Series.
RSB
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
HIGH PERFORMANCES - HIGH TEMPERATURE
D.C. AND PULSE APPLICATIONS
STACKED VERSION
p = 5 mm
PRODUCT CODE: RSB
MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 85°C)
Note: p (pitch) in mm.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Not for new design. Use new F622 Series.
Digitally signed by Marcy Brand
DN: c=US, st=FL, l=Fort Lauderdale,
o=KEMET Corporation, ou=Marketing
Communications, cn=Marcy Brand,
email=marcybrand@kemet.com
Date: 2012.07.18 12:11:33 -04'00'