ALUMINUM ELECTROLYTIC CAPACITORS CS Miniature Sized, High Ripple Current, High Reliability series CA High ripple current and Long Life product withstanding load life of 8000 to 10000 hours at +105C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). Smaller CS Smaller CY Specifications Item Performance Characteristics Category Temperature Range - 40 to +105C (160 to 400V) , - 25 to +105C (450V) Rated Voltage Range 160 to 450V Rated Capacitance Range 6.8 to 330F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.04CV+100 (A) Measurement frequency : 120Hz, Temperature : 20C Tangent of loss angle (tan ) Rated voltage (V) tan (MAX.) 160 0.20 200 0.20 250 0.20 350 0.24 400 0.24 450 0.24 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z- 25C / Z+20C Z- 40C / Z+20C 160 3 6 200 3 6 250 3 6 350 5 6 400 5 6 450 6 -- Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 10000 hours (8000 hours for D=10) at 105C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current Type numbering system (Example : 250V 100F) Radial Lead Type 1 d Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U CS 2 E 1 0 1 M HD T Size code Capacitance tolerance (20%) P 0.5 D+0.5MAX. Configuration Rated capacitance (100F) Rated voltage (250V) Series name Pressure relief vent L + 1.5MAX. 15 MIN Type 4 MIN Configuration D (mm) D 10 12.5 16 18 P 5.0 5.0 7.5 7.5 d 0.6 0.6 0.8 0.8 Pb-free leadwire Pb-free PET sleeve 10 PD 12.5 to 18 HD * Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100A ALUMINUM ELECTROLYTIC CAPACITORS CS series Dimensions Cap 6.8 V 160 200 250 Code 2C 2D 2E 100 15 150 22 220 47 68 82 100 330 470 680 820 101 10 x 16 10 x 20 10 x 20 10 x 20 12.5 x 20 10 x 16 320 10 x 20 500 1180 12.5 x 20 1275 12.5 x 25 1420 16 x 20 1420 500 10x 20 650 750 320 650 12.5 x 20 980 12.5 x 20 1300 10 x 20 10 x 20 12.5 x 20 12.5 x 20 16 x 20 400 2V 6R8 10 33 350 350 500 800 980 1300 2G 10 x 16 280 10 x 20 350 12.5 x 20 16 x 20 16 x 20 650 900 1080 16 x 25 1400 18 x 20 1375 16 x 20 1380 16 x 20 1380 18 x 25 1530 16 x 20 1420 16 x 25 1530 18 x 25 1575 150 151 16 x 20 1890 16 x 25 1890 18 x 25 1940 220 221 16 x 25 2370 18 x 25 2365 18 x 31.5 3130 330 331 18 x 31.5 3130 18 x 35.5 3220 450 2W 10 x 16 280 10 x 20 280 10 x 20 350 12.5 x 20 450 12.5 x 20 550 12.5 x 25 600 12.5 x 20 760 16 x 20 730 16 x 25 980 18 x 20 980 18 x 25 1200 18 x 31.5 1575 16 x 20 900 16 x 25 1180 18 x 20 1180 18 x 25 1470 18 x 25 1525 Case size D x L (mm) : Rated ripple current (mArms) at 105C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.40 0.50 0.80 0.90 1.00 CAT.8100A