PART NO. HEAD SIZE "A".010 HEAD THICKNESS "B" SRSG6-04-01 .38 X .38 [9.7 X 9.7] .04 [1] SRSG-1D .240-.260 [6.1-6.6] SRSG-2D .307-.317 [7.8-8.1] SRSG-3D .360-.390 [9.1-9.9] .490 [12.4] DIA. SRSG-4D .485-.515 [12.3-13.1] SRSG-5D .610-.640 [15.5-16.3] SRSG-6D .672-.702 [17.1-17.8] SRSG-7S .028-.038 [0.7-1] .405 X .405 [10.3 X 10.3] SRSG-8S .057-.067 [1.4-1.7] SRSG-9D .093-.103 [2.4-2.6] .500 [12.7] DIA. SRSG-10D .125-.135 [3.2-3.4] SRSG-11D .360-.390 [9.1-9.9] PRONG LENGTH "C".015 .280 [7.1] MOUNTING HOLE SIZE (SQUARE) PANEL THICKNESS RANGE "T2" .245-.255 [6.22-6.48] .031-.125 [0.79-3.18] .280 [7.1] .281-.286 [7.14-7.26] *.031-.109 [0.79-2.77] SELF FIG TAPPING NO. SCREW SIZE 6 1 HEAD STYLE NO. 1 2 2 8 or 10 .275-.290 [6.99-7.37] .031-.130 [0.79-3.3] 1 1 .280-.295 [7.11-7.49] .031-.156 [0.79-3.96] 1 2 .325 [8.3] HEAD STYLE 1 HEAD STYLE 2 RECOMMENDED SCREW LENGTH = T1+B+C "A" "A" "A" "T1" "T2" "B" TYPICAL APPLICATION "B" "C" NOTES: 1. MATERIAL: NYLON 6/6 UL 94 UL V-2 (RMS-01) 2. COLOR: NATURAL. 3. *PARTS AT MINIMUM PANEL THICKNESS (.031 [0.79]) WORK ONLY WITH #10 SCREW 4. ALTERNATE UNITS FOR REFERENCE ONLY. TITLE: SEE ECN #1318 FOR CHANGES SEE ECN # 1118 FORNO. CHANGES CHANGED FILE AND TITLE BLOCK DESCRIPTION SK 04/19/07 SK 06/05/06 SM 05/16/01 ENGR. DATE FIG 1 FIG 2 SELF RETAINING SCREW GROMMET CREATED USING SOLIDWORKS C B A REV. "C" TOLERANCES UNLESS NOTED .XX=.010 .XXX=.005 FRAC.=1/64 ANG.=1 FILE #: SRSG SHEET: 1 OF 1 RE: SHEET SIZE: A RICHCO, INC. DWN: SK DT: 09/22/05 APP: CHKD: - RICHCO, INC. ENG@RICHCO-INC.COM (773) 539-4060 DWG IN IN [MM] FINAL PART # SEE TABLE PRINT TYPE CA